u-boot/board/snmc/qs860t/qs860t.c

221 lines
4.8 KiB
C
Raw Normal View History

/*
* (C) Copyright 2003
* MuLogic B.V.
*
* (C) Copyright 2002
* Simple Network Magic Corporation, dnevil@snmc.com
*
* (C) Copyright 2000
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <asm/u-boot.h>
#include <commproc.h>
#include "mpc8xx.h"
/* ------------------------------------------------------------------------- */
static long int dram_size (long int, long int *, long int);
/* ------------------------------------------------------------------------- */
const uint sdram_table[] =
{
/*
* Single Read. (Offset 0 in UPMA RAM)
*/
0x1F07FC04, 0xEEAEFC04, 0x11ADFC04, 0xEFBBBC00,
0x1FF77C47, 0x1FF77C35, 0xEFEABC34, 0x1FB57C35,
/*
* Burst Read. (Offset 8 in UPMA RAM)
*/
0x1F07FC04, 0xEEAEFC04, 0x10ADFC04, 0xF0AFFC00,
0xF0AFFC00, 0xF1AFFC00, 0xEFBBBC00, 0x1FF77C47,
0xFFFFEC04, 0xFFFFEC04, 0xFFFFEC04, 0xFFFFEC04,
0xFFFFEC04, 0xFFFFEC04, 0xFFFFEC04, 0xFFFFEC04,
/*
* Single Write. (Offset 18 in UPMA RAM)
*/
0x1F27FC04, 0xEEAEBC00, 0x01B93C04, 0x1FF77C47,
0xFFFFEC04, 0xFFFFEC04, 0xFFFFEC04, 0xFFFFEC04,
/*
* Burst Write. (Offset 20 in UPMA RAM)
*/
0x1F07FC04, 0xEEAEBC00, 0x10AD7C00, 0xF0AFFC00,
0xF0AFFC00, 0xE1BBBC04, 0x1FF77C47, 0xFFFFEC04,
0xFFFFEC04, 0xFFFFEC04, 0xFFFFEC04, 0xFFFFEC04,
0xFFFFEC04, 0xFFFFEC04, 0xFFFFEC04, 0xFFFFEC04,
/*
* Refresh (Offset 30 in UPMA RAM)
*/
0x1FF5FC84, 0xFFFFFC04, 0xFFFFFC04, 0xFFFFFC04,
0xFFFFFC84, 0xFFFFFC07, 0xFFFFEC04, 0xFFFFEC04,
0xFFFFEC04, 0xFFFFEC04, 0xFFFFEC04, 0xFFFFEC04,
/*
* Exception. (Offset 3c in UPMA RAM)
*/
0x7FFFFC07, 0xFFFFEC04, 0xFFFFEC04, 0xFFFFEC04
};
/* ------------------------------------------------------------------------- */
/*
* Check Board Identity:
*
* Test ID string (QS860T...)
*
* Always return 1
*/
int checkboard (void)
{
2005-10-13 14:45:02 +00:00
char *s, *e;
char buf[64];
int i;
i = getenv_f("serial#", buf, sizeof(buf));
s = (i>0) ? buf : NULL;
if (!s || strncmp(s, "QS860T", 6)) {
puts ("### No HW ID - assuming QS860T");
} else {
for (e=s; *e; ++e) {
if (*e == ' ')
break;
}
for ( ; s<e; ++s) {
putc (*s);
}
}
putc ('\n');
return (0);
}
/* ------------------------------------------------------------------------- */
phys_size_t initdram (int board_type)
{
volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
volatile memctl8xx_t *memctl = &immap->im_memctl;
long int size;
upmconfig(UPMB, (uint *)sdram_table, sizeof(sdram_table)/sizeof(uint));
/*
* Prescaler for refresh
*/
memctl->memc_mptpr = 0x0400;
/*
* Map controller bank 2 to the SDRAM address
*/
memctl->memc_or2 = CONFIG_SYS_OR2;
memctl->memc_br2 = CONFIG_SYS_BR2;
udelay(200);
/* perform SDRAM initialization sequence */
memctl->memc_mbmr = CONFIG_SYS_16M_MBMR;
udelay(100);
memctl->memc_mar = 0x00000088;
memctl->memc_mcr = 0x80804105; /* run precharge pattern */
udelay(1);
/* Run two refresh cycles on SDRAM */
memctl->memc_mbmr = 0x18802118;
memctl->memc_mcr = 0x80804130;
memctl->memc_mbmr = 0x18802114;
memctl->memc_mcr = 0x80804106;
udelay (1000);
#if 0
/*
* Check for 64M SDRAM Memory Size
*/
size = dram_size (CONFIG_SYS_64M_MBMR, (ulong *)SDRAM_BASE, SDRAM_64M_MAX_SIZE);
udelay (1000);
/*
* Check for 16M SDRAM Memory Size
*/
if (size != SDRAM_64M_MAX_SIZE) {
#endif
size = dram_size (CONFIG_SYS_16M_MBMR, (long *)SDRAM_BASE, SDRAM_16M_MAX_SIZE);
udelay (1000);
#if 0
}
memctl->memc_or2 = ((-size) & 0xFFFF0000) | SDRAM_TIMING;
#endif
udelay(10000);
#if 0
/*
* Also, map other memory to correct position
*/
/*
* Map the 8M Intel Flash device to chip select 1
*/
memctl->memc_or1 = CONFIG_SYS_OR1;
memctl->memc_br1 = CONFIG_SYS_BR1;
/*
* Map 64K NVRAM, Sipex Device, NAND Ctl Reg, and LED Ctl Reg
* to chip select 3
*/
memctl->memc_or3 = CONFIG_SYS_OR3;
memctl->memc_br3 = CONFIG_SYS_BR3;
/*
* Map chip selects 4, 5, 6, & 7 for external expansion connector
*/
memctl->memc_or4 = CONFIG_SYS_OR4;
memctl->memc_br4 = CONFIG_SYS_BR4;
memctl->memc_or5 = CONFIG_SYS_OR5;
memctl->memc_br5 = CONFIG_SYS_BR5;
memctl->memc_or6 = CONFIG_SYS_OR6;
memctl->memc_br6 = CONFIG_SYS_BR6;
memctl->memc_or7 = CONFIG_SYS_OR7;
memctl->memc_br7 = CONFIG_SYS_BR7;
#endif
return (size);
}
/* ------------------------------------------------------------------------- */
/*
* Check memory range for valid RAM. A simple memory test determines
* the actually available RAM size between addresses `base' and
* `base + maxsize'. Some (not all) hardware errors are detected:
* - short between address lines
* - short between data lines
*/
static long int dram_size (long int mbmr_value, long int *base, long int maxsize)
{
volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
volatile memctl8xx_t *memctl = &immap->im_memctl;
memctl->memc_mbmr = mbmr_value;
return (get_ram_size(base, maxsize));
}