u-boot/cmd/Makefile

254 lines
7.7 KiB
Makefile
Raw Normal View History

# SPDX-License-Identifier: GPL-2.0+
#
# (C) Copyright 2004-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
ifndef CONFIG_SPL_BUILD
# core command
obj-y += boot.o
obj-$(CONFIG_CMD_BOOTM) += bootm.o
obj-y += help.o
obj-y += panic.o
obj-y += version.o
# command
obj-$(CONFIG_CMD_ACPI) += acpi.o
obj-$(CONFIG_CMD_ADDRMAP) += addrmap.o
obj-$(CONFIG_CMD_AES) += aes.o
obj-$(CONFIG_CMD_AB_SELECT) += ab_select.o
obj-$(CONFIG_CMD_ADC) += adc.o
obj-$(CONFIG_CMD_ARMFLASH) += armflash.o
obj-$(CONFIG_HAVE_BLOCK_DEVICE) += blk_common.o
obj-$(CONFIG_CMD_SOURCE) += source.o
cmd: Add 'bcb' command to read/modify/write BCB fields 'Bootloader Control Block' (BCB) is a well established term/acronym in the Android namespace which refers to a location in a dedicated raw (i.e. FS-unaware) flash (e.g. eMMC) partition, usually called "misc", which is used as media for exchanging messages between Android userspace (particularly recovery [1]) and an Android-capable bootloader. On higher level, this allows implementing a subset of Android Bootloader Requirements [2], amongst which is the Android-specific bootloader flow [3]. Regardless how the latter is implemented in U-Boot ([3] being the most memorable example), reading/writing/dumping the BCB fields in the development process from inside the U-Boot is a convenient feature. Hence, make it available to the users. Some usage examples of the new command recorded on R-Car H3ULCB-KF ('>>>' is an overlay on top of the original console output): => bcb bcb - Load/set/clear/test/dump/store Android BCB fields Usage: bcb load <dev> <part> - load BCB from mmc <dev>:<part> bcb set <field> <val> - set BCB <field> to <val> bcb clear [<field>] - clear BCB <field> or all fields bcb test <field> <op> <val> - test BCB <field> against <val> bcb dump <field> - dump BCB <field> bcb store - store BCB back to mmc Legend: <dev> - MMC device index containing the BCB partition <part> - MMC partition index or name containing the BCB <field> - one of {command,status,recovery,stage,reserved} <op> - the binary operator used in 'bcb test': '=' returns true if <val> matches the string stored in <field> '~' returns true if <val> matches a subset of <field>'s string <val> - string/text provided as input to bcb {set,test} NOTE: any ':' character in <val> will be replaced by line feed during 'bcb set' and used as separator by upper layers => bcb dump command Error: Please, load BCB first! >>> Users must specify mmc device and partition before any other call => bcb load 1 misc => bcb load 1 1 >>> The two calls are equivalent (assuming "misc" has index 1) => bcb dump command 00000000: 62 6f 6f 74 6f 6e 63 65 2d 73 68 65 6c 6c 00 72 bootonce-shell.r 00000010: 79 00 72 00 00 00 00 00 00 00 00 00 00 00 00 00 y.r............. >>> The output is in binary/string format for convenience >>> The output size matches the size of inspected BCB field >>> (32 bytes in case of 'command') => bcb test command = bootonce-shell && echo true true => bcb test command = bootonce-shell- && echo true => bcb test command = bootonce-shel && echo true >>> The '=' operator returns 'true' on perfect match => bcb test command ~ bootonce-shel && echo true true => bcb test command ~ bootonce-shell && echo true true >>> The '~' operator returns 'true' on substring match => bcb set command recovery => bcb dump command 00000000: 72 65 63 6f 76 65 72 79 00 73 68 65 6c 6c 00 72 recovery.shell.r 00000010: 79 00 72 00 00 00 00 00 00 00 00 00 00 00 00 00 y.r............. >>> The new value is NULL-terminated and stored in the BCB field => bcb set recovery "msg1:msg2:msg3" => bcb dump recovery 00000040: 6d 73 67 31 0a 6d 73 67 32 0a 6d 73 67 33 00 00 msg1.msg2.msg3.. 00000050: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00000060: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ >>> --- snip --- >>> Every ':' is replaced by line-feed '\n' (0xA). The latter is used >>> as separator between individual commands by Android userspace => bcb store >>> Flush/store the BCB structure to MMC [1] https://android.googlesource.com/platform/bootable/recovery [2] https://source.android.com/devices/bootloader [3] https://patchwork.ozlabs.org/patch/746835/ ("[U-Boot,5/6] Initial support for the Android Bootloader flow") Signed-off-by: Eugeniu Rosca <erosca@de.adit-jv.com>
2019-05-23 15:32:22 +00:00
obj-$(CONFIG_CMD_BCB) += bcb.o
obj-$(CONFIG_CMD_BDI) += bdinfo.o
obj-$(CONFIG_CMD_BEDBUG) += bedbug.o
obj-$(CONFIG_CMD_BIND) += bind.o
obj-$(CONFIG_CMD_BINOP) += binop.o
obj-$(CONFIG_CMD_BLOBLIST) += bloblist.o
obj-$(CONFIG_CMD_BLOCK_CACHE) += blkcache.o
obj-$(CONFIG_CMD_BMP) += bmp.o
obj-$(CONFIG_CMD_BOOTCOUNT) += bootcount.o
obj-$(CONFIG_CMD_BOOTEFI) += bootefi.o
obj-$(CONFIG_CMD_BOOTMENU) += bootmenu.o
obj-$(CONFIG_CMD_BOOTSTAGE) += bootstage.o
obj-$(CONFIG_CMD_BOOTZ) += bootz.o
obj-$(CONFIG_CMD_BOOTI) += booti.o
obj-$(CONFIG_CMD_BTRFS) += btrfs.o
obj-$(CONFIG_CMD_BUTTON) += button.o
obj-$(CONFIG_CMD_CACHE) += cache.o
obj-$(CONFIG_CMD_CBFS) += cbfs.o
obj-$(CONFIG_CMD_CLK) += clk.o
obj-$(CONFIG_CMD_CLS) += cls.o
obj-$(CONFIG_CMD_CONFIG) += config.o
obj-$(CONFIG_CMD_CONITRACE) += conitrace.o
obj-$(CONFIG_CMD_CONSOLE) += console.o
obj-$(CONFIG_CMD_CPU) += cpu.o
obj-$(CONFIG_DATAFLASH_MMC_SELECT) += dataflash_mmc_mux.o
obj-$(CONFIG_CMD_DATE) += date.o
obj-$(CONFIG_CMD_DEMO) += demo.o
obj-$(CONFIG_CMD_DM) += dm.o
obj-$(CONFIG_CMD_SOUND) += sound.o
ifdef CONFIG_POST
obj-$(CONFIG_CMD_DIAG) += diag.o
endif
obj-$(CONFIG_CMD_ADTIMG) += adtimg.o
obj-$(CONFIG_CMD_ABOOTIMG) += abootimg.o
obj-$(CONFIG_CMD_ECHO) += echo.o
obj-$(CONFIG_ENV_IS_IN_EEPROM) += eeprom.o
obj-$(CONFIG_CMD_EEPROM) += eeprom.o
obj-$(CONFIG_EFI_STUB) += efi.o
obj-$(CONFIG_CMD_EFIDEBUG) += efidebug.o
obj-$(CONFIG_CMD_ELF) += elf.o
obj-$(CONFIG_HUSH_PARSER) += exit.o
obj-$(CONFIG_CMD_EXT4) += ext4.o
obj-$(CONFIG_CMD_EXT2) += ext2.o
obj-$(CONFIG_CMD_FAT) += fat.o
obj-$(CONFIG_CMD_FDT) += fdt.o
obj-$(CONFIG_CMD_SQUASHFS) += sqfs.o
obj-$(CONFIG_CMD_FLASH) += flash.o
obj-$(CONFIG_CMD_FPGA) += fpga.o
obj-$(CONFIG_CMD_FPGAD) += fpgad.o
obj-$(CONFIG_CMD_FS_GENERIC) += fs.o
obj-$(CONFIG_CMD_FUSE) += fuse.o
obj-$(CONFIG_CMD_GETTIME) += gettime.o
obj-$(CONFIG_CMD_GPIO) += gpio.o
obj-$(CONFIG_CMD_HVC) += smccc.o
obj-$(CONFIG_CMD_I2C) += i2c.o
obj-$(CONFIG_CMD_IOTRACE) += iotrace.o
obj-$(CONFIG_CMD_HASH) += hash.o
obj-$(CONFIG_CMD_IDE) += ide.o disk.o
obj-$(CONFIG_CMD_INI) += ini.o
obj-$(CONFIG_CMD_IRQ) += irq.o
obj-$(CONFIG_CMD_ITEST) += itest.o
obj-$(CONFIG_CMD_JFFS2) += jffs2.o
obj-$(CONFIG_CMD_CRAMFS) += cramfs.o
obj-$(CONFIG_LED_STATUS_CMD) += legacy_led.o
obj-$(CONFIG_CMD_LED) += led.o
obj-$(CONFIG_CMD_LICENSE) += license.o
obj-y += load.o
obj-$(CONFIG_CMD_LOG) += log.o
obj-$(CONFIG_CMD_LSBLK) += lsblk.o
obj-$(CONFIG_ID_EEPROM) += mac.o
obj-$(CONFIG_CMD_MD5SUM) += md5sum.o
obj-$(CONFIG_CMD_MEMORY) += mem.o
obj-$(CONFIG_CMD_IO) += io.o
obj-$(CONFIG_CMD_MFSL) += mfsl.o
obj-$(CONFIG_CMD_MII) += mii.o
obj-$(CONFIG_CMD_MISC) += misc.o
obj-$(CONFIG_CMD_MDIO) += mdio.o
obj-$(CONFIG_CMD_SLEEP) += sleep.o
obj-$(CONFIG_CMD_MMC) += mmc.o
obj-$(CONFIG_CMD_OPTEE_RPMB) += optee_rpmb.o
obj-$(CONFIG_MP) += mp.o
obj-$(CONFIG_CMD_MTD) += mtd.o
obj-$(CONFIG_CMD_MTDPARTS) += mtdparts.o
obj-$(CONFIG_CMD_CLONE) += clone.o
ifneq ($(CONFIG_CMD_NAND)$(CONFIG_CMD_SF),)
obj-y += legacy-mtd-utils.o
endif
cmd: Add a mux command This command lets the user list, select, and deselect mux controllers introduced with the mux framework on the fly. It has 3 subcommands: list, select, and deselect. List: Lists all the mux present on the system. The muxes are listed for each chip. The chip is identified by its device name. Each chip can have a number of mux controllers. Each is listed in sequence and is assigned a sequential ID based on its position in the mux chip. It lists details like ID, whether the mux is currently selected or not, the current state, the idle state, and the number of states. A sample output would look something like: => mux list a-mux-controller: ID Selected Current State Idle State Num States 0 no unknown as-is 0x4 1 no 0x2 0x2 0x10 2 no 0x73 0x73 0x100 another-mux-controller: ID Selected Current State Idle State Num States 0 no 0x1 0x1 0x4 1 no 0x2 0x2 0x4 Select: Selects a given mux and puts it in the specified state. This subcommand takes 3 arguments: mux chip, mux ID, state to set the mux in. The arguments mux chip and mux ID are used to identify which mux needs to be selected, and then it is selected to the given state. The mux needs to be deselected before it can be selected again in another state. The state should be a hexadecimal number. For example: => mux list a-mux-controller: ID Selected Current State Idle State Num States 0 no 0x1 0x1 0x4 1 no 0x1 0x1 0x4 => mux select a-mux-controller 0 0x3 => mux list a-mux-controller: ID Selected Current State Idle State Num States 0 yes 0x3 0x1 0x4 1 no 0x1 0x1 0x4 Deselect: Deselects a given mux and puts it in its idle state. This subcommand takes 2 arguments: the mux chip and mux ID to identify which mux needs to be deselected. So in the above example, we can deselect mux 0 using: => mux deselect a-mux-controller 0 => mux list a-mux-controller: ID Selected Current State Idle State Num States 0 no 0x1 0x1 0x4 1 no 0x1 0x1 0x4 Signed-off-by: Pratyush Yadav <p.yadav@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-10-16 10:46:35 +00:00
obj-$(CONFIG_CMD_MUX) += mux.o
obj-$(CONFIG_CMD_NAND) += nand.o
obj-$(CONFIG_CMD_NET) += net.o
obj-$(CONFIG_CMD_NVEDIT_EFI) += nvedit_efi.o
obj-$(CONFIG_CMD_ONENAND) += onenand.o
obj-$(CONFIG_CMD_OSD) += osd.o
obj-$(CONFIG_CMD_PART) += part.o
obj-$(CONFIG_CMD_PCAP) += pcap.o
ifdef CONFIG_PCI
obj-$(CONFIG_CMD_PCI) += pci.o
endif
obj-$(CONFIG_CMD_PINMUX) += pinmux.o
obj-$(CONFIG_CMD_PMC) += pmc.o
obj-$(CONFIG_CMD_PSTORE) += pstore.o
obj-$(CONFIG_CMD_PWM) += pwm.o
obj-$(CONFIG_CMD_PXE) += pxe.o pxe_utils.o
obj-$(CONFIG_CMD_WOL) += wol.o
obj-$(CONFIG_CMD_QFW) += qfw.o
obj-$(CONFIG_CMD_READ) += read.o
obj-$(CONFIG_CMD_REGINFO) += reginfo.o
obj-$(CONFIG_CMD_REISER) += reiser.o
obj-$(CONFIG_CMD_REMOTEPROC) += remoteproc.o
obj-$(CONFIG_CMD_RNG) += rng.o
obj-$(CONFIG_CMD_ROCKUSB) += rockusb.o
obj-$(CONFIG_CMD_RTC) += rtc.o
obj-$(CONFIG_SANDBOX) += host.o
obj-$(CONFIG_CMD_SATA) += sata.o
obj-$(CONFIG_CMD_NVME) += nvme.o
obj-$(CONFIG_SANDBOX) += sb.o
obj-$(CONFIG_CMD_SF) += sf.o
obj-$(CONFIG_CMD_SCSI) += scsi.o disk.o
obj-$(CONFIG_CMD_SHA1SUM) += sha1sum.o
obj-$(CONFIG_CMD_SETEXPR) += setexpr.o
obj-$(CONFIG_CMD_SPI) += spi.o
obj-$(CONFIG_CMD_STRINGS) += strings.o
obj-$(CONFIG_CMD_SMC) += smccc.o
obj-$(CONFIG_CMD_SYSBOOT) += sysboot.o pxe_utils.o
obj-$(CONFIG_CMD_TERMINAL) += terminal.o
obj-$(CONFIG_CMD_TIME) += time.o
obj-$(CONFIG_CMD_TIMER) += timer.o
obj-$(CONFIG_CMD_TRACE) += trace.o
obj-$(CONFIG_HUSH_PARSER) += test.o
obj-$(CONFIG_CMD_TPM) += tpm-common.o
obj-$(CONFIG_CMD_TPM_V1) += tpm-v1.o
obj-$(CONFIG_CMD_TPM_TEST) += tpm_test.o
obj-$(CONFIG_CMD_TPM_V2) += tpm-v2.o
obj-$(CONFIG_CMD_CROS_EC) += cros_ec.o
obj-$(CONFIG_CMD_TSI148) += tsi148.o
obj-$(CONFIG_CMD_UBI) += ubi.o
obj-$(CONFIG_CMD_UBIFS) += ubifs.o
obj-$(CONFIG_CMD_UNIVERSE) += universe.o
obj-$(CONFIG_CMD_UNLZ4) += unlz4.o
obj-$(CONFIG_CMD_UNZIP) += unzip.o
obj-$(CONFIG_CMD_VIRTIO) += virtio.o
obj-$(CONFIG_CMD_WDT) += wdt.o
obj-$(CONFIG_CMD_LZMADEC) += lzmadec.o
obj-$(CONFIG_CMD_UFS) += ufs.o
obj-$(CONFIG_CMD_USB) += usb.o disk.o
obj-$(CONFIG_CMD_FASTBOOT) += fastboot.o
obj-$(CONFIG_CMD_FS_UUID) += fs_uuid.o
obj-$(CONFIG_CMD_USB_MASS_STORAGE) += usb_mass_storage.o
obj-$(CONFIG_CMD_USB_SDP) += usb_gadget_sdp.o
obj-$(CONFIG_CMD_THOR_DOWNLOAD) += thordown.o
obj-$(CONFIG_CMD_XIMG) += ximg.o
obj-$(CONFIG_CMD_YAFFS2) += yaffs2.o
obj-$(CONFIG_CMD_SPL) += spl.o
obj-$(CONFIG_CMD_W1) += w1.o
obj-$(CONFIG_CMD_ZIP) += zip.o
obj-$(CONFIG_CMD_ZFS) += zfs.o
obj-$(CONFIG_CMD_DFU) += dfu.o
obj-$(CONFIG_CMD_GPT) += gpt.o
obj-$(CONFIG_CMD_MBR) += mbr.o
obj-$(CONFIG_CMD_ETHSW) += ethsw.o
obj-$(CONFIG_CMD_AXI) += axi.o
obj-$(CONFIG_CMD_PVBLOCK) += pvblock.o
# Power
obj-$(CONFIG_CMD_PMIC) += pmic.o
obj-$(CONFIG_CMD_REGULATOR) += regulator.o
obj-$(CONFIG_CMD_BLOB) += blob.o
# Android Verified Boot 2.0
obj-$(CONFIG_CMD_AVB) += avb.o
# Foundries.IO SCP03
obj-$(CONFIG_CMD_SCP03) += scp03.o
obj-$(CONFIG_ARM) += arm/
obj-$(CONFIG_RISCV) += riscv/
obj-$(CONFIG_SANDBOX) += sandbox/
obj-$(CONFIG_X86) += x86/
obj-$(CONFIG_ARCH_MVEBU) += mvebu/
endif # !CONFIG_SPL_BUILD
obj-$(CONFIG_$(SPL_)CMD_TLV_EEPROM) += tlv_eeprom.o
# core command
obj-y += nvedit.o
obj-$(CONFIG_CMD_BCM_EXT_UTILS) += broadcom/
obj-$(CONFIG_TI_COMMON_CMD_OPTIONS) += ti/
filechk_data_gz = (echo "static const char data_gz[] ="; cat $< | scripts/bin2c; echo ";")
filechk_data_size = \
(echo "static const size_t data_size = "; \
cat $< | wc -c; echo ";")
# "config" command
$(obj)/config.o: $(obj)/config_data_gz.h $(obj)/config_data_size.h
targets += config_data.gz
$(obj)/config_data.gz: $(KCONFIG_CONFIG) FORCE
$(call if_changed,gzip)
targets += config_data_gz.h
$(obj)/config_data_gz.h: $(obj)/config_data.gz FORCE
$(call filechk,data_gz)
targets += config_data_size.h
$(obj)/config_data_size.h: $(KCONFIG_CONFIG) FORCE
$(call filechk,data_size)
# "license" command
$(obj)/license.o: $(obj)/license_data_gz.h $(obj)/license_data_size.h
targets += license_data.gz
$(obj)/license_data.gz: $(srctree)/Licenses/gpl-2.0.txt FORCE
$(call if_changed,gzip)
targets += license_data_gz.h
$(obj)/license_data_gz.h: $(obj)/license_data.gz FORCE
$(call filechk,data_gz)
targets += license_data_size.h
$(obj)/license_data_size.h: $(srctree)/Licenses/gpl-2.0.txt FORCE
$(call filechk,data_size)
CFLAGS_ethsw.o := -Wno-enum-conversion