2021-05-31 13:50:40 +00:00
|
|
|
.. SPDX-License-Identifier: GPL-2.0+
|
|
|
|
|
|
|
|
|
|
U-Boot for the Congatec conga-QMX8 board
|
|
|
|
|
========================================
|
|
|
|
|
|
|
|
|
|
Quick Start
|
|
|
|
|
-----------
|
|
|
|
|
|
|
|
|
|
- Build the ARM Trusted firmware binary
|
|
|
|
|
- Get scfw_tcm.bin and ahab-container.img
|
|
|
|
|
- Get imx-mkimage
|
|
|
|
|
- Build U-Boot
|
|
|
|
|
- Build imx-mkimage
|
|
|
|
|
- Flash the binary into the SD card
|
|
|
|
|
- Boot
|
|
|
|
|
|
|
|
|
|
Get and Build the ARM Trusted firmware
|
|
|
|
|
--------------------------------------
|
|
|
|
|
|
|
|
|
|
.. code-block:: bash
|
|
|
|
|
|
|
|
|
|
$ git clone https://source.codeaurora.org/external/imx/imx-atf
|
|
|
|
|
$ cd imx-atf/
|
|
|
|
|
$ git checkout origin/imx_4.14.78_1.0.0_ga -b imx_4.14.78_1.0.0_ga
|
|
|
|
|
$ make PLAT=imx8qm bl31
|
|
|
|
|
|
|
|
|
|
Get scfw_tcm.bin and ahab-container.img
|
|
|
|
|
---------------------------------------
|
|
|
|
|
|
|
|
|
|
.. code-block:: bash
|
|
|
|
|
|
|
|
|
|
$ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/imx-sc-firmware-1.1.bin
|
|
|
|
|
$ chmod +x imx-sc-firmware-1.1.bin
|
|
|
|
|
$ ./imx-sc-firmware-1.1.bin
|
|
|
|
|
$ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-8.0.bin
|
|
|
|
|
$ chmod +x firmware-imx-8.0.bin
|
|
|
|
|
$ ./firmware-imx-8.0.bin
|
|
|
|
|
|
|
|
|
|
Or use this to avoid running random scripts from the internet,
|
|
|
|
|
but note that you must agree to the license the script displays:
|
|
|
|
|
|
|
|
|
|
.. code-block:: bash
|
|
|
|
|
|
|
|
|
|
$ dd if=imx-sc-firmware-1.1.bin of=imx-sc-firmware-1.1.tar.bz2 bs=37185 skip=1
|
|
|
|
|
$ tar -xf imx-sc-firmware-1.1.tar.bz2
|
|
|
|
|
$ cp imx-sc-firmware-1.1/mx8qx-val-scfw-tcm.bin $(builddir)
|
|
|
|
|
|
|
|
|
|
$ dd if=firmware-imx-8.0.bin of=firmware-imx-8.0.tar.bz2 bs=37180 skip=1
|
|
|
|
|
$ tar -xf firmware-imx-8.0.tar.bz2
|
|
|
|
|
$ cp firmware-imx-8.0/firmware/seco/mx8qm-ahab-container.img $(builddir)
|
|
|
|
|
|
|
|
|
|
Build U-Boot
|
|
|
|
|
------------
|
|
|
|
|
|
|
|
|
|
.. code-block:: bash
|
|
|
|
|
|
|
|
|
|
$ export ATF_LOAD_ADDR=0x80000000
|
|
|
|
|
$ export BL33_LOAD_ADDR=0x80020000
|
|
|
|
|
$ make cgtqmx8_defconfig
|
2022-11-04 15:03:38 +00:00
|
|
|
$ make
|
2021-05-31 13:50:40 +00:00
|
|
|
|
|
|
|
|
Flash the binary into the SD card
|
|
|
|
|
---------------------------------
|
|
|
|
|
|
|
|
|
|
Burn the flash.bin binary to SD card offset 32KB:
|
|
|
|
|
|
|
|
|
|
.. code-block:: bash
|
|
|
|
|
|
|
|
|
|
$ sudo dd if=flash.bin of=/dev/sd[x] bs=1k seek=32 conv=fsync
|
