u-boot/include/configs/lpd7a404.h

113 lines
3.4 KiB
C
Raw Normal View History

/*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#ifndef __LPD7A404_H_
#define __LPD7A404_H_
#define CONFIG_LPD7A404 /* Logic LH7A400 SDK */
/*
* If we are developing, we might want to start armboot from ram
* so we MUST NOT initialize critical regs like mem-timing ...
*/
#define CONFIG_INIT_CRITICAL /* undef for developing */
#undef CONFIG_USE_IRQ
/*
* This board uses the logic LH7A404-10 card engine
*/
#include <configs/lpd7a404-10.h>
#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
#define CONFIG_SETUP_MEMORY_TAGS 1
#define CONFIG_INITRD_TAG 1
/*
* Size of malloc() pool
*/
#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128*1024)
#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
/*
* select serial console configuration
*/
#define CONFIG_CONSOLE_UART2 /* UART2 LH7A40x for console */
/* allow to overwrite serial and ethaddr */
#define CONFIG_ENV_OVERWRITE
#define CONFIG_BAUDRATE 115200
#define CONFIG_IPADDR 192.168.1.100
#define CONFIG_NETMASK 255.255.1.0
#define CONFIG_SERVERIP 192.168.1.1
#define CONFIG_TIMESTAMP 1 /* Print timestamp info for images */
#ifndef USE_920T_MMU
#define CONFIG_COMMANDS ((CONFIG_CMD_DFL | CFG_CMD_PING) & ~(CFG_CMD_CACHE))
#else
#define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_DATE)
#endif
/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
#include <cmd_confdefs.h>
#define CONFIG_BOOTDELAY 3
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */
/* what's this ? it's not used anywhere */
#define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */
#endif
/*
* Miscellaneous configurable options
*/
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "LPD7A404> " /* Monitor Command Prompt */
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
#define CFG_MAXARGS 16 /* max number of command args */
#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
#define CFG_MEMTEST_START 0xc0300000 /* memtest works on */
#define CFG_MEMTEST_END 0xc0500000 /* 2 MB in DRAM */
#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */
#define CFG_LOAD_ADDR 0xc0f00000 /* default load address */
/* valid baudrates */
#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
/* size and location of u-boot in flash */
#define CFG_MONITOR_BASE CFG_FLASH_BASE
#define CFG_MONITOR_LEN (256<<10)
#define CFG_ENV_IS_IN_FLASH 1
/* Address and size of Primary Environment Sector */
#define CFG_ENV_ADDR (CFG_FLASH_BASE + 0xFC0000)
#define CFG_ENV_SIZE 0x40000
#endif /* __LPD7A404_H_ */