Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-11-24 21:54:01 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/configs/starfive_visionfive2_defconfig

132 lines
3.4 KiB
Text
Raw Normal View History

configs: starfive: add starfive_visionfive2_defconfig This is the initial basic config for StarFive VisionFive v2 board. It includes consol, Norflash, sdio, ddr etc. Signed-off-by: Yanhong Wang <yanhong.wang@starfivetech.com> Tested-by: Conor Dooley <conor.dooley@microchip.com>
2023-03-16 02:53:32 +00:00
CONFIG_RISCV=y
CONFIG_SYS_MALLOC_LEN=0x800000
CONFIG_SYS_MALLOC_F_LEN=0x10000
CONFIG_SPL_GPIO=y
CONFIG_NR_DRAM_BANKS=1
CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x80000000
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2023-05-01 15:50:26 +00:00
CONFIG_SF_DEFAULT_SPEED=100000000
configs: starfive: Enable environment in SPI flash support On Starfive Visionfive 2, the u-boot environment settings are saved to on-board SPI flash. Enable relative configs by default and set offset and size according to upstream linux dts. Signed-off-by: Shengyu Qu <wiagn233@outlook.com> Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
2023-08-08 13:14:36 +00:00
CONFIG_ENV_SIZE=0x10000
CONFIG_ENV_OFFSET=0xf0000
configs: starfive: add starfive_visionfive2_defconfig This is the initial basic config for StarFive VisionFive v2 board. It includes consol, Norflash, sdio, ddr etc. Signed-off-by: Yanhong Wang <yanhong.wang@starfivetech.com> Tested-by: Conor Dooley <conor.dooley@microchip.com>
2023-03-16 02:53:32 +00:00
CONFIG_SPL_DM_SPI=y
riscv: dts: jh7110: Combine the board device tree files of 1.2A and 1.3B The difference between 1.2A and 1.3B is dynamically configured according to the PCB version, and there is no difference on the board device tree, so the same DT file can be used. Signed-off-by: Yanhong Wang <yanhong.wang@starfivetech.com> Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
2023-06-15 09:36:45 +00:00
CONFIG_DEFAULT_DEVICE_TREE="jh7110-starfive-visionfive-2"
configs: starfive: add starfive_visionfive2_defconfig This is the initial basic config for StarFive VisionFive v2 board. It includes consol, Norflash, sdio, ddr etc. Signed-off-by: Yanhong Wang <yanhong.wang@starfivetech.com> Tested-by: Conor Dooley <conor.dooley@microchip.com>
2023-03-16 02:53:32 +00:00
CONFIG_SPL_TEXT_BASE=0x8000000
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2023-05-01 15:50:26 +00:00
CONFIG_OF_LIBFDT_OVERLAY=y
configs: starfive: add starfive_visionfive2_defconfig This is the initial basic config for StarFive VisionFive v2 board. It includes consol, Norflash, sdio, ddr etc. Signed-off-by: Yanhong Wang <yanhong.wang@starfivetech.com> Tested-by: Conor Dooley <conor.dooley@microchip.com>
2023-03-16 02:53:32 +00:00
CONFIG_DM_RESET=y
CONFIG_SPL_MMC=y
configs: starfive: Enable ID EEPROM configuration Enabled ID_EEPROM and I2C configuration for StarFive VisionFive2 board. Signed-off-by: Yanhong Wang <yanhong.wang@starfivetech.com> Reviewed-By: Leo Yu-Chi Linag <ycliang@andestech.com>
2023-06-15 09:36:50 +00:00
CONFIG_SPL_DRIVERS_MISC=y
configs: starfive: add starfive_visionfive2_defconfig This is the initial basic config for StarFive VisionFive v2 board. It includes consol, Norflash, sdio, ddr etc. Signed-off-by: Yanhong Wang <yanhong.wang@starfivetech.com> Tested-by: Conor Dooley <conor.dooley@microchip.com>
2023-03-16 02:53:32 +00:00
CONFIG_SPL_STACK=0x8180000
CONFIG_SPL=y
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI=y
CONFIG_SYS_LOAD_ADDR=0x82000000
configs: starfive-jh7110: Add support for PCIe host driver Add PCIe host driver and nvme driver in configure file. Signed-off-by: Mason Huo <mason.huo@starfivetech.com> Signed-off-by: Minda Chen <minda.chen@starfivetech.com> Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
2023-07-25 09:46:49 +00:00
CONFIG_SYS_PCI_64BIT=y
CONFIG_PCI=y
configs: starfive: add starfive_visionfive2_defconfig This is the initial basic config for StarFive VisionFive v2 board. It includes consol, Norflash, sdio, ddr etc. Signed-off-by: Yanhong Wang <yanhong.wang@starfivetech.com> Tested-by: Conor Dooley <conor.dooley@microchip.com>
2023-03-16 02:53:32 +00:00
CONFIG_TARGET_STARFIVE_VISIONFIVE2=y
CONFIG_SPL_OPENSBI_LOAD_ADDR=0x40000000
CONFIG_ARCH_RV64I=y
CONFIG_CMODEL_MEDANY=y
CONFIG_RISCV_SMODE=y
configs: starfive: Enable ID EEPROM configuration Enabled ID_EEPROM and I2C configuration for StarFive VisionFive2 board. Signed-off-by: Yanhong Wang <yanhong.wang@starfivetech.com> Reviewed-By: Leo Yu-Chi Linag <ycliang@andestech.com>
2023-06-15 09:36:50 +00:00
# CONFIG_OF_BOARD_FIXUP is not set
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2023-10-02 14:35:27 +00:00
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
configs: starfive: add starfive_visionfive2_defconfig This is the initial basic config for StarFive VisionFive v2 board. It includes consol, Norflash, sdio, ddr etc. Signed-off-by: Yanhong Wang <yanhong.wang@starfivetech.com> Tested-by: Conor Dooley <conor.dooley@microchip.com>
2023-03-16 02:53:32 +00:00
CONFIG_FIT=y
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2023-05-01 15:50:26 +00:00
CONFIG_DISTRO_DEFAULTS=y
configs: starfive: add starfive_visionfive2_defconfig This is the initial basic config for StarFive VisionFive v2 board. It includes consol, Norflash, sdio, ddr etc. Signed-off-by: Yanhong Wang <yanhong.wang@starfivetech.com> Tested-by: Conor Dooley <conor.dooley@microchip.com>
2023-03-16 02:53:32 +00:00
CONFIG_QSPI_BOOT=y
CONFIG_SD_BOOT=y
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2023-10-02 17:58:20 +00:00
CONFIG_OF_BOARD_SETUP=y
configs: starfive: add starfive_visionfive2_defconfig This is the initial basic config for StarFive VisionFive v2 board. It includes consol, Norflash, sdio, ddr etc. Signed-off-by: Yanhong Wang <yanhong.wang@starfivetech.com> Tested-by: Conor Dooley <conor.dooley@microchip.com>
2023-03-16 02:53:32 +00:00
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="console=ttyS0,115200 debug rootwait earlycon=sbi"
CONFIG_USE_PREBOOT=y
configs: starfive: Enable PCIE auto enum and NVME/USB stuff for Starfive Visionfive 2 Although PCIE driver already exists, board defconfig isn't configured to enable PCIE enum on boot, thus USB storage device and NVME drive are not supported by default. So modify defconfig to enable PCIE auto enum, then start USB subsystem and scan nvme drive on boot. Signed-off-by: Shengyu Qu <wiagn233@outlook.com> Tested-by: Milan P. Stanić <mps@arvanta.net>
2023-08-22 14:33:56 +00:00
CONFIG_PREBOOT="nvme scan; usb start; setenv fdt_addr ${fdtcontroladdr}; fdt addr ${fdtcontroladdr};"
riscv: dts: jh7110: Combine the board device tree files of 1.2A and 1.3B The difference between 1.2A and 1.3B is dynamically configured according to the PCB version, and there is no difference on the board device tree, so the same DT file can be used. Signed-off-by: Yanhong Wang <yanhong.wang@starfivetech.com> Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
2023-06-15 09:36:45 +00:00
CONFIG_DEFAULT_FDT_FILE="starfive/jh7110-starfive-visionfive-2.dtb"
configs: starfive: add starfive_visionfive2_defconfig This is the initial basic config for StarFive VisionFive v2 board. It includes consol, Norflash, sdio, ddr etc. Signed-off-by: Yanhong Wang <yanhong.wang@starfivetech.com> Tested-by: Conor Dooley <conor.dooley@microchip.com>
2023-03-16 02:53:32 +00:00
CONFIG_DISPLAY_CPUINFO=y
CONFIG_DISPLAY_BOARDINFO=y
configs: starfive: Enable ID EEPROM configuration Enabled ID_EEPROM and I2C configuration for StarFive VisionFive2 board. Signed-off-by: Yanhong Wang <yanhong.wang@starfivetech.com> Reviewed-By: Leo Yu-Chi Linag <ycliang@andestech.com>
2023-06-15 09:36:50 +00:00
CONFIG_ID_EEPROM=y
CONFIG_SYS_EEPROM_BUS_NUM=5
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2023-10-02 14:35:27 +00:00
CONFIG_PCI_INIT_R=y
configs: starfive: add starfive_visionfive2_defconfig This is the initial basic config for StarFive VisionFive v2 board. It includes consol, Norflash, sdio, ddr etc. Signed-off-by: Yanhong Wang <yanhong.wang@starfivetech.com> Tested-by: Conor Dooley <conor.dooley@microchip.com>
2023-03-16 02:53:32 +00:00
CONFIG_SPL_MAX_SIZE=0x40000
CONFIG_SPL_PAD_TO=0x0
CONFIG_SPL_BSS_START_ADDR=0x8040000
CONFIG_SPL_BSS_MAX_SIZE=0x10000
# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
spl: Use CONFIG_SPL... instead of CONFIG_..._SPL_... We like to put the SPL first so it is clear that it relates to SPL. Rename various malloc-related options which have crept in, to stick to this convention. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Reviewed-by: Svyatoslav Ryhel <clamor95@gmail.com>
2023-09-26 14:14:16 +00:00
CONFIG_SPL_SYS_MALLOC=y
CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y
CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x80000000
CONFIG_SPL_SYS_MALLOC_SIZE=0x400000
configs: starfive: add starfive_visionfive2_defconfig This is the initial basic config for StarFive VisionFive v2 board. It includes consol, Norflash, sdio, ddr etc. Signed-off-by: Yanhong Wang <yanhong.wang@starfivetech.com> Tested-by: Conor Dooley <conor.dooley@microchip.com>
2023-03-16 02:53:32 +00:00
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION=y
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION=0x2
configs: starfive: Enable ID EEPROM configuration Enabled ID_EEPROM and I2C configuration for StarFive VisionFive2 board. Signed-off-by: Yanhong Wang <yanhong.wang@starfivetech.com> Reviewed-By: Leo Yu-Chi Linag <ycliang@andestech.com>
2023-06-15 09:36:50 +00:00
CONFIG_SPL_I2C=y
configs: starfive: add starfive_visionfive2_defconfig This is the initial basic config for StarFive VisionFive v2 board. It includes consol, Norflash, sdio, ddr etc. Signed-off-by: Yanhong Wang <yanhong.wang@starfivetech.com> Tested-by: Conor Dooley <conor.dooley@microchip.com>
2023-03-16 02:53:32 +00:00
CONFIG_SPL_DM_SPI_FLASH=y
CONFIG_SPL_DM_RESET=y
CONFIG_SPL_SPI_LOAD=y
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2023-10-02 14:35:27 +00:00
CONFIG_SYS_PROMPT="StarFive # "
configs: starfive: add starfive_visionfive2_defconfig This is the initial basic config for StarFive VisionFive v2 board. It includes consol, Norflash, sdio, ddr etc. Signed-off-by: Yanhong Wang <yanhong.wang@starfivetech.com> Tested-by: Conor Dooley <conor.dooley@microchip.com>
2023-03-16 02:53:32 +00:00
CONFIG_SYS_CBSIZE=256
CONFIG_SYS_PBSIZE=276
CONFIG_SYS_BOOTM_LEN=0x4000000
configs: starfive: Enable ID EEPROM configuration Enabled ID_EEPROM and I2C configuration for StarFive VisionFive2 board. Signed-off-by: Yanhong Wang <yanhong.wang@starfivetech.com> Reviewed-By: Leo Yu-Chi Linag <ycliang@andestech.com>
2023-06-15 09:36:50 +00:00
CONFIG_CMD_EEPROM=y
CONFIG_SYS_EEPROM_SIZE=512
CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=4
CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5
configs: starfive: add starfive_visionfive2_defconfig This is the initial basic config for StarFive VisionFive v2 board. It includes consol, Norflash, sdio, ddr etc. Signed-off-by: Yanhong Wang <yanhong.wang@starfivetech.com> Tested-by: Conor Dooley <conor.dooley@microchip.com>
2023-03-16 02:53:32 +00:00
CONFIG_CMD_MEMINFO=y
configs: starfive: Enable ID EEPROM configuration Enabled ID_EEPROM and I2C configuration for StarFive VisionFive2 board. Signed-off-by: Yanhong Wang <yanhong.wang@starfivetech.com> Reviewed-By: Leo Yu-Chi Linag <ycliang@andestech.com>
2023-06-15 09:36:50 +00:00
CONFIG_CMD_I2C=y
configs: starfive-jh7110: Add support for PCIe host driver Add PCIe host driver and nvme driver in configure file. Signed-off-by: Mason Huo <mason.huo@starfivetech.com> Signed-off-by: Minda Chen <minda.chen@starfivetech.com> Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
2023-07-25 09:46:49 +00:00
CONFIG_CMD_PCI=y
configs: riscv: starfive: Add VF2 PCIe USB3 XHCI support Add XHCI_PCI to enable usb3-host functions. Also add usb command and keyboard config. Signed-off-by: Minda Chen <minda.chen@starfivetech.com> Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
2023-08-07 08:53:38 +00:00
CONFIG_CMD_USB=y
configs: starfive: add starfive_visionfive2_defconfig This is the initial basic config for StarFive VisionFive v2 board. It includes consol, Norflash, sdio, ddr etc. Signed-off-by: Yanhong Wang <yanhong.wang@starfivetech.com> Tested-by: Conor Dooley <conor.dooley@microchip.com>
2023-03-16 02:53:32 +00:00
CONFIG_CMD_TFTPPUT=y
configs: starfive: Enable ID EEPROM configuration Enabled ID_EEPROM and I2C configuration for StarFive VisionFive2 board. Signed-off-by: Yanhong Wang <yanhong.wang@starfivetech.com> Reviewed-By: Leo Yu-Chi Linag <ycliang@andestech.com>
2023-06-15 09:36:50 +00:00
CONFIG_OF_BOARD=y
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2023-10-02 14:35:27 +00:00
CONFIG_ENV_OVERWRITE=y
CONFIG_ENV_IS_NOWHERE=y
CONFIG_ENV_IS_IN_SPI_FLASH=y
CONFIG_ENV_SECT_SIZE_AUTO=y
configs: starfive: add starfive_visionfive2_defconfig This is the initial basic config for StarFive VisionFive v2 board. It includes consol, Norflash, sdio, ddr etc. Signed-off-by: Yanhong Wang <yanhong.wang@starfivetech.com> Tested-by: Conor Dooley <conor.dooley@microchip.com>
2023-03-16 02:53:32 +00:00
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
configs: starfive: Enable ID EEPROM configuration Enabled ID_EEPROM and I2C configuration for StarFive VisionFive2 board. Signed-off-by: Yanhong Wang <yanhong.wang@starfivetech.com> Reviewed-By: Leo Yu-Chi Linag <ycliang@andestech.com>
2023-06-15 09:36:50 +00:00
CONFIG_SPL_DM_SEQ_ALIAS=y
configs: starfive: Enable ethernet configuration for StarFive VisionFive2 Enable DWC_ETH_QOS and PHY_MOTORCOMM configuration to support ethernet function for StarFive VisionFive 2 board,including versions 1.2A and 1.3B. Signed-off-by: Yanhong Wang <yanhong.wang@starfivetech.com> Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
2023-06-15 09:36:47 +00:00
CONFIG_REGMAP=y
CONFIG_SYSCON=y
configs: starfive: add starfive_visionfive2_defconfig This is the initial basic config for StarFive VisionFive v2 board. It includes consol, Norflash, sdio, ddr etc. Signed-off-by: Yanhong Wang <yanhong.wang@starfivetech.com> Tested-by: Conor Dooley <conor.dooley@microchip.com>
2023-03-16 02:53:32 +00:00
CONFIG_SPL_CLK_COMPOSITE_CCF=y
CONFIG_CLK_COMPOSITE_CCF=y
CONFIG_SPL_CLK_JH7110=y
configs: starfive: Enable ID EEPROM configuration Enabled ID_EEPROM and I2C configuration for StarFive VisionFive2 board. Signed-off-by: Yanhong Wang <yanhong.wang@starfivetech.com> Reviewed-By: Leo Yu-Chi Linag <ycliang@andestech.com>
2023-06-15 09:36:50 +00:00
CONFIG_DM_I2C=y
CONFIG_SYS_I2C_DW=y
CONFIG_MISC=y
CONFIG_I2C_EEPROM=y
CONFIG_SPL_I2C_EEPROM=y
CONFIG_SYS_I2C_EEPROM_ADDR=0X50
configs: starfive: add starfive_visionfive2_defconfig This is the initial basic config for StarFive VisionFive v2 board. It includes consol, Norflash, sdio, ddr etc. Signed-off-by: Yanhong Wang <yanhong.wang@starfivetech.com> Tested-by: Conor Dooley <conor.dooley@microchip.com>
2023-03-16 02:53:32 +00:00
CONFIG_MMC_HS400_SUPPORT=y
CONFIG_SPL_MMC_HS400_SUPPORT=y
CONFIG_MMC_DW=y
CONFIG_MMC_DW_SNPS=y
CONFIG_SPI_FLASH_EON=y
CONFIG_SPI_FLASH_GIGADEVICE=y
CONFIG_SPI_FLASH_ISSI=y
CONFIG_SPI_FLASH_MACRONIX=y
configs: starfive: Enable ethernet configuration for StarFive VisionFive2 Enable DWC_ETH_QOS and PHY_MOTORCOMM configuration to support ethernet function for StarFive VisionFive 2 board,including versions 1.2A and 1.3B. Signed-off-by: Yanhong Wang <yanhong.wang@starfivetech.com> Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
2023-06-15 09:36:47 +00:00
CONFIG_PHY_MOTORCOMM=y
CONFIG_DM_MDIO=y
CONFIG_DM_ETH_PHY=y
CONFIG_DWC_ETH_QOS=y
CONFIG_DWC_ETH_QOS_STARFIVE=y
CONFIG_RGMII=y
CONFIG_RMII=y
configs: starfive-jh7110: Add CONFIG_RTL8169 Add PCIe device rtl8169 net adapter driver support. Signed-off-by: Minda Chen <minda.chen@starfivetech.com> Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
2023-07-20 11:37:29 +00:00
CONFIG_RTL8169=y
configs: starfive-jh7110: Add support for PCIe host driver Add PCIe host driver and nvme driver in configure file. Signed-off-by: Mason Huo <mason.huo@starfivetech.com> Signed-off-by: Minda Chen <minda.chen@starfivetech.com> Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
2023-07-25 09:46:49 +00:00
CONFIG_NVME_PCI=y
CONFIG_DM_PCI_COMPAT=y
CONFIG_PCI_REGION_MULTI_ENTRY=y
CONFIG_PCIE_STARFIVE_JH7110=y
configs: starfive: add starfive_visionfive2_defconfig This is the initial basic config for StarFive VisionFive v2 board. It includes consol, Norflash, sdio, ddr etc. Signed-off-by: Yanhong Wang <yanhong.wang@starfivetech.com> Tested-by: Conor Dooley <conor.dooley@microchip.com>
2023-03-16 02:53:32 +00:00
CONFIG_PINCTRL=y
CONFIG_PINCONF=y
CONFIG_SPL_PINCTRL=y
CONFIG_SPL_PINCONF=y
CONFIG_SPL_PINCTRL_STARFIVE=y
CONFIG_SPL_PINCTRL_STARFIVE_JH7110=y
CONFIG_PINCTRL_STARFIVE=y
# CONFIG_RAM_SIFIVE is not set
CONFIG_SYS_NS16550=y
CONFIG_CADENCE_QSPI=y
CONFIG_TIMER_EARLY=y
configs: riscv: starfive: Add VF2 PCIe USB3 XHCI support Add XHCI_PCI to enable usb3-host functions. Also add usb command and keyboard config. Signed-off-by: Minda Chen <minda.chen@starfivetech.com> Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
2023-08-07 08:53:38 +00:00
CONFIG_USB=y
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_PCI=y
configs: starfive: Enable PCIE auto enum and NVME/USB stuff for Starfive Visionfive 2 Although PCIE driver already exists, board defconfig isn't configured to enable PCIE enum on boot, thus USB storage device and NVME drive are not supported by default. So modify defconfig to enable PCIE auto enum, then start USB subsystem and scan nvme drive on boot. Signed-off-by: Shengyu Qu <wiagn233@outlook.com> Tested-by: Milan P. Stanić <mps@arvanta.net>
2023-08-22 14:33:56 +00:00
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_PCI=y
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_PCI=y
configs: riscv: starfive: Add VF2 PCIe USB3 XHCI support Add XHCI_PCI to enable usb3-host functions. Also add usb command and keyboard config. Signed-off-by: Minda Chen <minda.chen@starfivetech.com> Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
2023-08-07 08:53:38 +00:00
CONFIG_USB_KEYBOARD=y
Reference in a new issue Copy permalink