u-boot/board/netgear/dgnd3700v2/dgnd3700v2.c

// SPDX-License-Identifier: GPL-2.0+
/*
 * Copyright (C) 2018 Ãlvaro FernÃ¡ndez Rojas <noltari@gmail.com>
 */

#include <common.h>
#include <asm/io.h>

#define GPIO_BASE_6362			0x10000080

#define GPIO_MODE_6362_REG		0x18
#define GPIO_MODE_6362_SERIAL_LED_DATA	BIT(2)
#define GPIO_MODE_6362_SERIAL_LED_CLK	BIT(3)

#ifdef CONFIG_BOARD_EARLY_INIT_F
int board_early_init_f(void)
{
	void __iomem *gpio_regs = map_physmem(GPIO_BASE_6362, 0, MAP_NOCACHE);

	/* Enable Serial LEDs */
	setbits_be32(gpio_regs + GPIO_MODE_6362_REG,
		     GPIO_MODE_6362_SERIAL_LED_DATA |
		     GPIO_MODE_6362_SERIAL_LED_CLK);

	return 0;
}
#endif
-												SPDX: Convert all of our single license tags to Linux Kernel style

When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from.  So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry.  Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents.  There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini <trini@konsulko.com>

											
										
										
											2018-05-06 21:58:06 +00:00
+								// SPDX-License-Identifier: GPL-2.0+
-												MIPS: add BMIPS Netgear DGND3700v2 board

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

											
										
										
											2018-02-03 09:30:28 +00:00
+								/*
 								 * Copyright (C) 2018 Ãlvaro FernÃ¡ndez Rojas <noltari@gmail.com>
 								 */
 								#include <common.h>
 								#include <asm/io.h>
 								#define GPIO_BASE_6362			0x10000080
 								#define GPIO_MODE_6362_REG		0x18
 								#define GPIO_MODE_6362_SERIAL_LED_DATA	BIT(2)
 								#define GPIO_MODE_6362_SERIAL_LED_CLK	BIT(3)
 								#ifdef CONFIG_BOARD_EARLY_INIT_F
 								int board_early_init_f(void)
 								{
 									void __iomem *gpio_regs = map_physmem(GPIO_BASE_6362, 0, MAP_NOCACHE);
 									/* Enable Serial LEDs */
 									setbits_be32(gpio_regs + GPIO_MODE_6362_REG,
 										     GPIO_MODE_6362_SERIAL_LED_DATA |
 										     GPIO_MODE_6362_SERIAL_LED_CLK);
 									return 0;
 								}
 								#endif