u-boot/tools/relocate-rela.c

645 lines
15 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0+ OR BSD-2-Clause
arm64: Add tool to statically apply RELA relocations ARM64 uses the newer RELA-style relocations rather than the older REL. RELA relocations have an addend in the relocation struct, rather than expecting the loader to read a value from the location to be updated. While this is beneficial for ordinary program loading, it's problematic for U-Boot because the location to be updated starts out with zero, rather than a pre-relocation value. Since we need to be able to run C code before relocation, we need a tool to apply the relocations at build time. In theory this tool is applicable to other newer architectures (mainly 64-bit), but currently the only relocations it supports are for arm64, and it assumes a 64-bit little-endian target. If the latter limitation is ever to be changed, we'll need a way to tell the tool what format the image is in. Eventually this may be replaced by a tool that uses libelf or similar and operates directly on the ELF file. I've written some code for such an approach but libelf does not make it easy to poke addresses by memory address (rather than by section), and I was hesitant to write code to manually parse the program headers and do the update outside of libelf (or to iterate over sections) -- especially since it wouldn't get test coverage on things like binaries with multiple PT_LOAD segments. This should be good enough for now to let the manual relocation stuff be removed from the arm64 patches. Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: David Feng <fenghua@phytium.com.cn>
2013-12-14 03:47:32 +00:00
/*
* Copyright 2013 Freescale Semiconductor, Inc.
*
* 64-bit and little-endian target only until we need to support a different
* arch that needs this.
*/
#include <elf.h>
#include <errno.h>
#include <inttypes.h>
#include <stdarg.h>
#include <stdbool.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include "compiler.h"
arm64: Add tool to statically apply RELA relocations ARM64 uses the newer RELA-style relocations rather than the older REL. RELA relocations have an addend in the relocation struct, rather than expecting the loader to read a value from the location to be updated. While this is beneficial for ordinary program loading, it's problematic for U-Boot because the location to be updated starts out with zero, rather than a pre-relocation value. Since we need to be able to run C code before relocation, we need a tool to apply the relocations at build time. In theory this tool is applicable to other newer architectures (mainly 64-bit), but currently the only relocations it supports are for arm64, and it assumes a 64-bit little-endian target. If the latter limitation is ever to be changed, we'll need a way to tell the tool what format the image is in. Eventually this may be replaced by a tool that uses libelf or similar and operates directly on the ELF file. I've written some code for such an approach but libelf does not make it easy to poke addresses by memory address (rather than by section), and I was hesitant to write code to manually parse the program headers and do the update outside of libelf (or to iterate over sections) -- especially since it wouldn't get test coverage on things like binaries with multiple PT_LOAD segments. This should be good enough for now to let the manual relocation stuff be removed from the arm64 patches. Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: David Feng <fenghua@phytium.com.cn>
2013-12-14 03:47:32 +00:00
#ifndef R_AARCH64_RELATIVE
#define R_AARCH64_RELATIVE 1027
#endif
static int ei_class;
static uint64_t rela_start, rela_end, text_base, dyn_start;
arm64: Add tool to statically apply RELA relocations ARM64 uses the newer RELA-style relocations rather than the older REL. RELA relocations have an addend in the relocation struct, rather than expecting the loader to read a value from the location to be updated. While this is beneficial for ordinary program loading, it's problematic for U-Boot because the location to be updated starts out with zero, rather than a pre-relocation value. Since we need to be able to run C code before relocation, we need a tool to apply the relocations at build time. In theory this tool is applicable to other newer architectures (mainly 64-bit), but currently the only relocations it supports are for arm64, and it assumes a 64-bit little-endian target. If the latter limitation is ever to be changed, we'll need a way to tell the tool what format the image is in. Eventually this may be replaced by a tool that uses libelf or similar and operates directly on the ELF file. I've written some code for such an approach but libelf does not make it easy to poke addresses by memory address (rather than by section), and I was hesitant to write code to manually parse the program headers and do the update outside of libelf (or to iterate over sections) -- especially since it wouldn't get test coverage on things like binaries with multiple PT_LOAD segments. This should be good enough for now to let the manual relocation stuff be removed from the arm64 patches. Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: David Feng <fenghua@phytium.com.cn>
2013-12-14 03:47:32 +00:00
static const bool debug_en;
static void debug(const char *fmt, ...)
{
va_list args;
if (debug_en) {
va_start(args, fmt);
arm64: Add tool to statically apply RELA relocations ARM64 uses the newer RELA-style relocations rather than the older REL. RELA relocations have an addend in the relocation struct, rather than expecting the loader to read a value from the location to be updated. While this is beneficial for ordinary program loading, it's problematic for U-Boot because the location to be updated starts out with zero, rather than a pre-relocation value. Since we need to be able to run C code before relocation, we need a tool to apply the relocations at build time. In theory this tool is applicable to other newer architectures (mainly 64-bit), but currently the only relocations it supports are for arm64, and it assumes a 64-bit little-endian target. If the latter limitation is ever to be changed, we'll need a way to tell the tool what format the image is in. Eventually this may be replaced by a tool that uses libelf or similar and operates directly on the ELF file. I've written some code for such an approach but libelf does not make it easy to poke addresses by memory address (rather than by section), and I was hesitant to write code to manually parse the program headers and do the update outside of libelf (or to iterate over sections) -- especially since it wouldn't get test coverage on things like binaries with multiple PT_LOAD segments. This should be good enough for now to let the manual relocation stuff be removed from the arm64 patches. Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: David Feng <fenghua@phytium.com.cn>
2013-12-14 03:47:32 +00:00
vprintf(fmt, args);
va_end(args);
}
arm64: Add tool to statically apply RELA relocations ARM64 uses the newer RELA-style relocations rather than the older REL. RELA relocations have an addend in the relocation struct, rather than expecting the loader to read a value from the location to be updated. While this is beneficial for ordinary program loading, it's problematic for U-Boot because the location to be updated starts out with zero, rather than a pre-relocation value. Since we need to be able to run C code before relocation, we need a tool to apply the relocations at build time. In theory this tool is applicable to other newer architectures (mainly 64-bit), but currently the only relocations it supports are for arm64, and it assumes a 64-bit little-endian target. If the latter limitation is ever to be changed, we'll need a way to tell the tool what format the image is in. Eventually this may be replaced by a tool that uses libelf or similar and operates directly on the ELF file. I've written some code for such an approach but libelf does not make it easy to poke addresses by memory address (rather than by section), and I was hesitant to write code to manually parse the program headers and do the update outside of libelf (or to iterate over sections) -- especially since it wouldn't get test coverage on things like binaries with multiple PT_LOAD segments. This should be good enough for now to let the manual relocation stuff be removed from the arm64 patches. Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: David Feng <fenghua@phytium.com.cn>
2013-12-14 03:47:32 +00:00
}
static bool supported_rela(Elf64_Rela *rela)
{
uint64_t mask = 0xffffffffULL; /* would be different on 32-bit */
uint32_t type = rela->r_info & mask;
switch (type) {
#ifdef R_AARCH64_RELATIVE
case R_AARCH64_RELATIVE:
return true;
#endif
default:
fprintf(stderr, "warning: unsupported relocation type %"
PRIu32 " at %" PRIx64 "\n",
type, rela->r_offset);
return false;
}
}
static int decode_elf64(FILE *felf, char **argv)
{
size_t size;
Elf64_Ehdr header;
uint64_t section_header_base, section_header_size, sh_offset, sh_size;
Elf64_Shdr *sh_table; /* Elf symbol table */
int ret, i, machine;
char *sh_str;
debug("64bit version\n");
/* Make sure we are at start */
rewind(felf);
size = fread(&header, 1, sizeof(header), felf);
if (size != sizeof(header)) {
fclose(felf);
return 25;
}
machine = header.e_machine;
debug("Machine\t%d\n", machine);
if (machine != EM_AARCH64) {
fprintf(stderr, "%s: Not supported machine type\n", argv[0]);
return 30;
}
text_base = header.e_entry;
section_header_base = header.e_shoff;
section_header_size = header.e_shentsize * header.e_shnum;
sh_table = malloc(section_header_size);
if (!sh_table) {
fprintf(stderr, "%s: Cannot allocate space for section header\n",
argv[0]);
fclose(felf);
return 26;
}
ret = fseek(felf, section_header_base, SEEK_SET);
if (ret) {
fprintf(stderr, "%s: Can't set pointer to section header: %x/%lx\n",
argv[0], ret, section_header_base);
free(sh_table);
fclose(felf);
return 26;
}
size = fread(sh_table, 1, section_header_size, felf);
if (size != section_header_size) {
fprintf(stderr, "%s: Can't read section header: %lx/%lx\n",
argv[0], size, section_header_size);
free(sh_table);
fclose(felf);
return 27;
}
sh_size = sh_table[header.e_shstrndx].sh_size;
debug("e_shstrndx\t0x%08x\n", header.e_shstrndx);
debug("sh_size\t\t0x%08lx\n", sh_size);
sh_str = malloc(sh_size);
if (!sh_str) {
fprintf(stderr, "malloc failed\n");
free(sh_table);
fclose(felf);
return 28;
}
/*
* Specifies the byte offset from the beginning of the file
* to the first byte in the section.
*/
sh_offset = sh_table[header.e_shstrndx].sh_offset;
debug("sh_offset\t0x%08x\n", header.e_shnum);
ret = fseek(felf, sh_offset, SEEK_SET);
if (ret) {
fprintf(stderr, "Setting up sh_offset failed\n");
free(sh_str);
free(sh_table);
fclose(felf);
return 29;
}
size = fread(sh_str, 1, sh_size, felf);
if (size != sh_size) {
fprintf(stderr, "%s: Can't read section: %lx/%lx\n",
argv[0], size, sh_size);
free(sh_str);
free(sh_table);
fclose(felf);
return 30;
}
for (i = 0; i < header.e_shnum; i++) {
/* fprintf(stderr, "%s\n", sh_str + sh_table[i].sh_name); Debug only */
if (!strcmp(".rela.dyn", (sh_str + sh_table[i].sh_name))) {
debug("Found section\t\".rela_dyn\"\n");
debug(" at addr\t0x%08x\n",
(unsigned int)sh_table[i].sh_addr);
debug(" at offset\t0x%08x\n",
(unsigned int)sh_table[i].sh_offset);
debug(" of size\t0x%08x\n",
(unsigned int)sh_table[i].sh_size);
rela_start = sh_table[i].sh_addr;
rela_end = rela_start + sh_table[i].sh_size;
break;
}
}
/* Clean up */
free(sh_str);
free(sh_table);
fclose(felf);
debug("text_base\t0x%08lx\n", text_base);
debug("rela_start\t0x%08lx\n", rela_start);
debug("rela_end\t0x%08lx\n", rela_end);
if (!rela_start)
return 1;
return 0;
}
static int decode_elf32(FILE *felf, char **argv)
{
size_t size;
Elf32_Ehdr header;
uint64_t section_header_base, section_header_size, sh_offset, sh_size;
Elf32_Shdr *sh_table; /* Elf symbol table */
int ret, i, machine;
char *sh_str;
debug("32bit version\n");
/* Make sure we are at start */
rewind(felf);
size = fread(&header, 1, sizeof(header), felf);
if (size != sizeof(header)) {
fclose(felf);
return 25;
}
machine = header.e_machine;
debug("Machine %d\n", machine);
if (machine != EM_MICROBLAZE) {
fprintf(stderr, "%s: Not supported machine type\n", argv[0]);
return 30;
}
text_base = header.e_entry;
section_header_base = header.e_shoff;
debug("Section header base %x\n", section_header_base);
section_header_size = header.e_shentsize * header.e_shnum;
debug("Section header size %d\n", section_header_size);
sh_table = malloc(section_header_size);
if (!sh_table) {
fprintf(stderr, "%s: Cannot allocate space for section header\n",
argv[0]);
fclose(felf);
return 26;
}
ret = fseek(felf, section_header_base, SEEK_SET);
if (ret) {
fprintf(stderr, "%s: Can't set pointer to section header: %x/%lx\n",
argv[0], ret, section_header_base);
free(sh_table);
fclose(felf);
return 26;
}
size = fread(sh_table, 1, section_header_size, felf);
if (size != section_header_size) {
fprintf(stderr, "%s: Can't read section header: %lx/%lx\n",
argv[0], size, section_header_size);
free(sh_table);
fclose(felf);
return 27;
}
sh_size = sh_table[header.e_shstrndx].sh_size;
debug("e_shstrndx %x, sh_size %lx\n", header.e_shstrndx, sh_size);
sh_str = malloc(sh_size);
if (!sh_str) {
fprintf(stderr, "malloc failed\n");
free(sh_table);
fclose(felf);
return 28;
}
/*
* Specifies the byte offset from the beginning of the file
* to the first byte in the section.
*/
sh_offset = sh_table[header.e_shstrndx].sh_offset;
debug("sh_offset %x\n", header.e_shnum);
ret = fseek(felf, sh_offset, SEEK_SET);
if (ret) {
fprintf(stderr, "Setting up sh_offset failed\n");
free(sh_str);
free(sh_table);
fclose(felf);
return 29;
}
size = fread(sh_str, 1, sh_size, felf);
if (size != sh_size) {
fprintf(stderr, "%s: Can't read section: %lx/%lx\n",
argv[0], size, sh_size);
free(sh_str);
free(sh_table);
fclose(felf);
return 30;
}
for (i = 0; i < header.e_shnum; i++) {
debug("%s\n", sh_str + sh_table[i].sh_name);
if (!strcmp(".rela.dyn", (sh_str + sh_table[i].sh_name))) {
debug("Found section\t\".rela_dyn\"\n");
debug(" at addr\t0x%08x\n", (unsigned int)sh_table[i].sh_addr);
debug(" at offset\t0x%08x\n", (unsigned int)sh_table[i].sh_offset);
debug(" of size\t0x%08x\n", (unsigned int)sh_table[i].sh_size);
rela_start = sh_table[i].sh_addr;
rela_end = rela_start + sh_table[i].sh_size;
}
if (!strcmp(".dynsym", (sh_str + sh_table[i].sh_name))) {
debug("Found section\t\".dynsym\"\n");
debug(" at addr\t0x%08x\n", (unsigned int)sh_table[i].sh_addr);
debug(" at offset\t0x%08x\n", (unsigned int)sh_table[i].sh_offset);
debug(" of size\t0x%08x\n", (unsigned int)sh_table[i].sh_size);
dyn_start = sh_table[i].sh_addr;
}
}
/* Clean up */
free(sh_str);
free(sh_table);
fclose(felf);
debug("text_base\t0x%08lx\n", text_base);
debug("rela_start\t0x%08lx\n", rela_start);
debug("rela_end\t0x%08lx\n", rela_end);
debug("dyn_start\t0x%08lx\n", dyn_start);
if (!rela_start)
return 1;
return 0;
}
static int decode_elf(char **argv)
arm64: Add tool to statically apply RELA relocations ARM64 uses the newer RELA-style relocations rather than the older REL. RELA relocations have an addend in the relocation struct, rather than expecting the loader to read a value from the location to be updated. While this is beneficial for ordinary program loading, it's problematic for U-Boot because the location to be updated starts out with zero, rather than a pre-relocation value. Since we need to be able to run C code before relocation, we need a tool to apply the relocations at build time. In theory this tool is applicable to other newer architectures (mainly 64-bit), but currently the only relocations it supports are for arm64, and it assumes a 64-bit little-endian target. If the latter limitation is ever to be changed, we'll need a way to tell the tool what format the image is in. Eventually this may be replaced by a tool that uses libelf or similar and operates directly on the ELF file. I've written some code for such an approach but libelf does not make it easy to poke addresses by memory address (rather than by section), and I was hesitant to write code to manually parse the program headers and do the update outside of libelf (or to iterate over sections) -- especially since it wouldn't get test coverage on things like binaries with multiple PT_LOAD segments. This should be good enough for now to let the manual relocation stuff be removed from the arm64 patches. Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: David Feng <fenghua@phytium.com.cn>
2013-12-14 03:47:32 +00:00
{
FILE *felf;
size_t size;
unsigned char e_ident[EI_NIDENT];
felf = fopen(argv[2], "r+b");
if (!felf) {
fprintf(stderr, "%s: Cannot open %s: %s\n",
argv[0], argv[5], strerror(errno));
return 2;
}
size = fread(e_ident, 1, EI_NIDENT, felf);
if (size != EI_NIDENT) {
fclose(felf);
return 25;
}
/* Check if this is really ELF file */
if (e_ident[0] != 0x7f &&
e_ident[1] != 'E' &&
e_ident[2] != 'L' &&
e_ident[3] != 'F') {
fclose(felf);
return 1;
}
ei_class = e_ident[4];
debug("EI_CLASS(1=32bit, 2=64bit) %d\n", ei_class);
if (ei_class == 2)
return decode_elf64(felf, argv);
return decode_elf32(felf, argv);
arm64: Add tool to statically apply RELA relocations ARM64 uses the newer RELA-style relocations rather than the older REL. RELA relocations have an addend in the relocation struct, rather than expecting the loader to read a value from the location to be updated. While this is beneficial for ordinary program loading, it's problematic for U-Boot because the location to be updated starts out with zero, rather than a pre-relocation value. Since we need to be able to run C code before relocation, we need a tool to apply the relocations at build time. In theory this tool is applicable to other newer architectures (mainly 64-bit), but currently the only relocations it supports are for arm64, and it assumes a 64-bit little-endian target. If the latter limitation is ever to be changed, we'll need a way to tell the tool what format the image is in. Eventually this may be replaced by a tool that uses libelf or similar and operates directly on the ELF file. I've written some code for such an approach but libelf does not make it easy to poke addresses by memory address (rather than by section), and I was hesitant to write code to manually parse the program headers and do the update outside of libelf (or to iterate over sections) -- especially since it wouldn't get test coverage on things like binaries with multiple PT_LOAD segments. This should be good enough for now to let the manual relocation stuff be removed from the arm64 patches. Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: David Feng <fenghua@phytium.com.cn>
2013-12-14 03:47:32 +00:00
}
static int rela_elf64(char **argv, FILE *f)
arm64: Add tool to statically apply RELA relocations ARM64 uses the newer RELA-style relocations rather than the older REL. RELA relocations have an addend in the relocation struct, rather than expecting the loader to read a value from the location to be updated. While this is beneficial for ordinary program loading, it's problematic for U-Boot because the location to be updated starts out with zero, rather than a pre-relocation value. Since we need to be able to run C code before relocation, we need a tool to apply the relocations at build time. In theory this tool is applicable to other newer architectures (mainly 64-bit), but currently the only relocations it supports are for arm64, and it assumes a 64-bit little-endian target. If the latter limitation is ever to be changed, we'll need a way to tell the tool what format the image is in. Eventually this may be replaced by a tool that uses libelf or similar and operates directly on the ELF file. I've written some code for such an approach but libelf does not make it easy to poke addresses by memory address (rather than by section), and I was hesitant to write code to manually parse the program headers and do the update outside of libelf (or to iterate over sections) -- especially since it wouldn't get test coverage on things like binaries with multiple PT_LOAD segments. This should be good enough for now to let the manual relocation stuff be removed from the arm64 patches. Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: David Feng <fenghua@phytium.com.cn>
2013-12-14 03:47:32 +00:00
{
int i, num;
if ((rela_end - rela_start) % sizeof(Elf64_Rela)) {
fprintf(stderr, "%s: rela size isn't a multiple of Elf64_Rela\n", argv[0]);
return 3;
}
arm64: Add tool to statically apply RELA relocations ARM64 uses the newer RELA-style relocations rather than the older REL. RELA relocations have an addend in the relocation struct, rather than expecting the loader to read a value from the location to be updated. While this is beneficial for ordinary program loading, it's problematic for U-Boot because the location to be updated starts out with zero, rather than a pre-relocation value. Since we need to be able to run C code before relocation, we need a tool to apply the relocations at build time. In theory this tool is applicable to other newer architectures (mainly 64-bit), but currently the only relocations it supports are for arm64, and it assumes a 64-bit little-endian target. If the latter limitation is ever to be changed, we'll need a way to tell the tool what format the image is in. Eventually this may be replaced by a tool that uses libelf or similar and operates directly on the ELF file. I've written some code for such an approach but libelf does not make it easy to poke addresses by memory address (rather than by section), and I was hesitant to write code to manually parse the program headers and do the update outside of libelf (or to iterate over sections) -- especially since it wouldn't get test coverage on things like binaries with multiple PT_LOAD segments. This should be good enough for now to let the manual relocation stuff be removed from the arm64 patches. Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: David Feng <fenghua@phytium.com.cn>
2013-12-14 03:47:32 +00:00
num = (rela_end - rela_start) / sizeof(Elf64_Rela);
for (i = 0; i < num; i++) {
Elf64_Rela rela, swrela;
uint64_t pos = rela_start + sizeof(Elf64_Rela) * i;
uint64_t addr;
if (fseek(f, pos, SEEK_SET) < 0) {
fprintf(stderr, "%s: %s: seek to %" PRIx64
" failed: %s\n",
argv[0], argv[1], pos, strerror(errno));
}
if (fread(&rela, sizeof(rela), 1, f) != 1) {
fprintf(stderr, "%s: %s: read rela failed at %"
PRIx64 "\n",
argv[0], argv[1], pos);
return 4;
}
swrela.r_offset = cpu_to_le64(rela.r_offset);
swrela.r_info = cpu_to_le64(rela.r_info);
swrela.r_addend = cpu_to_le64(rela.r_addend);
arm64: Add tool to statically apply RELA relocations ARM64 uses the newer RELA-style relocations rather than the older REL. RELA relocations have an addend in the relocation struct, rather than expecting the loader to read a value from the location to be updated. While this is beneficial for ordinary program loading, it's problematic for U-Boot because the location to be updated starts out with zero, rather than a pre-relocation value. Since we need to be able to run C code before relocation, we need a tool to apply the relocations at build time. In theory this tool is applicable to other newer architectures (mainly 64-bit), but currently the only relocations it supports are for arm64, and it assumes a 64-bit little-endian target. If the latter limitation is ever to be changed, we'll need a way to tell the tool what format the image is in. Eventually this may be replaced by a tool that uses libelf or similar and operates directly on the ELF file. I've written some code for such an approach but libelf does not make it easy to poke addresses by memory address (rather than by section), and I was hesitant to write code to manually parse the program headers and do the update outside of libelf (or to iterate over sections) -- especially since it wouldn't get test coverage on things like binaries with multiple PT_LOAD segments. This should be good enough for now to let the manual relocation stuff be removed from the arm64 patches. Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: David Feng <fenghua@phytium.com.cn>
2013-12-14 03:47:32 +00:00
if (!supported_rela(&swrela))
continue;
debug("Rela %" PRIx64 " %" PRIu64 " %" PRIx64 "\n",
swrela.r_offset, swrela.r_info, swrela.r_addend);
if (swrela.r_offset < text_base) {
fprintf(stderr, "%s: %s: bad rela at %" PRIx64 "\n",
argv[0], argv[1], pos);
return 4;
}
addr = swrela.r_offset - text_base;
if (fseek(f, addr, SEEK_SET) < 0) {
fprintf(stderr, "%s: %s: seek to %"
PRIx64 " failed: %s\n",
argv[0], argv[1], addr, strerror(errno));
}
if (fwrite(&rela.r_addend, sizeof(rela.r_addend), 1, f) != 1) {
fprintf(stderr, "%s: %s: write failed at %" PRIx64 "\n",
argv[0], argv[1], addr);
return 4;
}
}
return 0;
}
static bool supported_rela32(Elf32_Rela *rela, uint32_t *type)
{
uint32_t mask = 0xffULL; /* would be different on 32-bit */
*type = rela->r_info & mask;
debug("Type:\t");
switch (*type) {
case R_MICROBLAZE_32:
debug("R_MICROBLAZE_32\n");
return true;
case R_MICROBLAZE_GLOB_DAT:
debug("R_MICROBLAZE_GLOB_DAT\n");
return true;
case R_MICROBLAZE_NONE:
debug("R_MICROBLAZE_NONE - ignoring - do nothing\n");
return false;
case R_MICROBLAZE_REL:
debug("R_MICROBLAZE_REL\n");
return true;
default:
fprintf(stderr, "warning: unsupported relocation type %"
PRIu32 " at %" PRIx32 "\n", *type, rela->r_offset);
return false;
}
}
static int rela_elf32(char **argv, FILE *f)
{
int i, num, index;
uint32_t value, type;
if ((rela_end - rela_start) % sizeof(Elf32_Rela)) {
fprintf(stderr, "%s: rela size isn't a multiple of Elf32_Rela\n", argv[0]);
return 3;
}
num = (rela_end - rela_start) / sizeof(Elf32_Rela);
debug("Number of entries: %u\n", num);
for (i = 0; i < num; i++) {
Elf32_Rela rela, swrela;
Elf32_Sym symbols;
uint32_t pos = rela_start + sizeof(Elf32_Rela) * i;
uint32_t addr, pos_dyn;
debug("\nPossition:\t%d/0x%x\n", i, pos);
if (fseek(f, pos, SEEK_SET) < 0) {
fprintf(stderr, "%s: %s: seek to %" PRIx32
" failed: %s\n",
argv[0], argv[1], pos, strerror(errno));
}
if (fread(&rela, sizeof(rela), 1, f) != 1) {
fprintf(stderr, "%s: %s: read rela failed at %"
PRIx32 "\n",
argv[0], argv[1], pos);
return 4;
}
debug("Rela:\toffset:\t%" PRIx32 " r_info:\t%"
PRIu32 " r_addend:\t%" PRIx32 "\n",
rela.r_offset, rela.r_info, rela.r_addend);
swrela.r_offset = cpu_to_le32(rela.r_offset);
swrela.r_info = cpu_to_le32(rela.r_info);
swrela.r_addend = cpu_to_le32(rela.r_addend);
debug("SWRela:\toffset:\t%" PRIx32 " r_info:\t%"
PRIu32 " r_addend:\t%" PRIx32 "\n",
swrela.r_offset, swrela.r_info, swrela.r_addend);
if (!supported_rela32(&swrela, &type))
continue;
if (swrela.r_offset < text_base) {
fprintf(stderr, "%s: %s: bad rela at %" PRIx32 "\n",
argv[0], argv[1], pos);
return 4;
}
addr = swrela.r_offset - text_base;
debug("Addr:\t0x%" PRIx32 "\n", addr);
switch (type) {
case R_MICROBLAZE_REL:
if (fseek(f, addr, SEEK_SET) < 0) {
fprintf(stderr, "%s: %s: seek to %"
PRIx32 " failed: %s\n",
argv[0], argv[1], addr, strerror(errno));
return 5;
}
debug("Write addend\n");
if (fwrite(&rela.r_addend, sizeof(rela.r_addend), 1, f) != 1) {
fprintf(stderr, "%s: %s: write failed at %" PRIx32 "\n",
argv[0], argv[1], addr);
return 4;
}
break;
case R_MICROBLAZE_32:
case R_MICROBLAZE_GLOB_DAT:
/* global symbols read it and add reloc offset */
index = swrela.r_info >> 8;
pos_dyn = dyn_start + sizeof(Elf32_Sym) * index;
debug("Index:\t%d\n", index);
debug("Pos_dyn:\t0x%x\n", pos_dyn);
if (fseek(f, pos_dyn, SEEK_SET) < 0) {
fprintf(stderr, "%s: %s: seek to %"
PRIx32 " failed: %s\n",
argv[0], argv[1], pos_dyn, strerror(errno));
return 5;
}
if (fread(&symbols, sizeof(symbols), 1, f) != 1) {
fprintf(stderr, "%s: %s: read symbols failed at %"
PRIx32 "\n",
argv[0], argv[1], pos_dyn);
return 4;
}
debug("Symbol description:\n");
debug(" st_name:\t0x%x\n", symbols.st_name);
debug(" st_value:\t0x%x\n", symbols.st_value);
debug(" st_size:\t0x%x\n", symbols.st_size);
value = swrela.r_addend + symbols.st_value;
debug("Value:\t0x%x\n", value);
if (fseek(f, addr, SEEK_SET) < 0) {
fprintf(stderr, "%s: %s: seek to %"
PRIx32 " failed: %s\n",
argv[0], argv[1], addr, strerror(errno));
return 5;
}
if (fwrite(&value, sizeof(rela.r_addend), 1, f) != 1) {
fprintf(stderr, "%s: %s: write failed at %" PRIx32 "\n",
argv[0], argv[1], addr);
return 4;
}
break;
case R_MICROBLAZE_NONE:
debug("R_MICROBLAZE_NONE - skip\n");
break;
default:
fprintf(stderr, "warning: unsupported relocation type %"
PRIu32 " at %" PRIx32 "\n",
type, rela.r_offset);
}
}
return 0;
}
int main(int argc, char **argv)
{
FILE *f;
int ret;
uint64_t file_size;
if (argc != 3) {
fprintf(stderr, "Statically apply ELF rela relocations\n");
fprintf(stderr, "Usage: %s <bin file> <u-boot ELF>\n",
argv[0]);
return 1;
}
ret = decode_elf(argv);
if (ret) {
fprintf(stderr, "ELF decoding failed\n");
return ret;
}
if (rela_start > rela_end || rela_start < text_base) {
fprintf(stderr, "%s: bad rela bounds\n", argv[0]);
return 3;
}
rela_start -= text_base;
rela_end -= text_base;
dyn_start -= text_base;
f = fopen(argv[1], "r+b");
if (!f) {
fprintf(stderr, "%s: Cannot open %s: %s\n",
argv[0], argv[1], strerror(errno));
return 2;
}
fseek(f, 0, SEEK_END);
file_size = ftell(f);
rewind(f);
if (rela_end > file_size) {
// Most likely compiler inserted some section that didn't get
// objcopy-ed into the final binary
rela_end = file_size;
}
if (ei_class == 2)
ret = rela_elf64(argv, f);
else
ret = rela_elf32(argv, f);
arm64: Add tool to statically apply RELA relocations ARM64 uses the newer RELA-style relocations rather than the older REL. RELA relocations have an addend in the relocation struct, rather than expecting the loader to read a value from the location to be updated. While this is beneficial for ordinary program loading, it's problematic for U-Boot because the location to be updated starts out with zero, rather than a pre-relocation value. Since we need to be able to run C code before relocation, we need a tool to apply the relocations at build time. In theory this tool is applicable to other newer architectures (mainly 64-bit), but currently the only relocations it supports are for arm64, and it assumes a 64-bit little-endian target. If the latter limitation is ever to be changed, we'll need a way to tell the tool what format the image is in. Eventually this may be replaced by a tool that uses libelf or similar and operates directly on the ELF file. I've written some code for such an approach but libelf does not make it easy to poke addresses by memory address (rather than by section), and I was hesitant to write code to manually parse the program headers and do the update outside of libelf (or to iterate over sections) -- especially since it wouldn't get test coverage on things like binaries with multiple PT_LOAD segments. This should be good enough for now to let the manual relocation stuff be removed from the arm64 patches. Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: David Feng <fenghua@phytium.com.cn>
2013-12-14 03:47:32 +00:00
if (fclose(f) < 0) {
fprintf(stderr, "%s: %s: close failed: %s\n",
argv[0], argv[1], strerror(errno));
return 4;
}
return ret;
arm64: Add tool to statically apply RELA relocations ARM64 uses the newer RELA-style relocations rather than the older REL. RELA relocations have an addend in the relocation struct, rather than expecting the loader to read a value from the location to be updated. While this is beneficial for ordinary program loading, it's problematic for U-Boot because the location to be updated starts out with zero, rather than a pre-relocation value. Since we need to be able to run C code before relocation, we need a tool to apply the relocations at build time. In theory this tool is applicable to other newer architectures (mainly 64-bit), but currently the only relocations it supports are for arm64, and it assumes a 64-bit little-endian target. If the latter limitation is ever to be changed, we'll need a way to tell the tool what format the image is in. Eventually this may be replaced by a tool that uses libelf or similar and operates directly on the ELF file. I've written some code for such an approach but libelf does not make it easy to poke addresses by memory address (rather than by section), and I was hesitant to write code to manually parse the program headers and do the update outside of libelf (or to iterate over sections) -- especially since it wouldn't get test coverage on things like binaries with multiple PT_LOAD segments. This should be good enough for now to let the manual relocation stuff be removed from the arm64 patches. Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: David Feng <fenghua@phytium.com.cn>
2013-12-14 03:47:32 +00:00
}