Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-12-21 18:53:06 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/configs/colibri-imx6ull_defconfig

101 lines
2.6 KiB
Text
Raw Normal View History

board: toradex: add Colibri iMX6ULL support Add support for the Colibri iMX6ULL module which comes with on-board raw NAND. Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
2018-05-30 17:01:48 +00:00
CONFIG_ARM=y
CONFIG_ARCH_MX6=y
CONFIG_SYS_TEXT_BASE=0x87800000
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-01 12:19:22 +00:00
CONFIG_SYS_MALLOC_LEN=0x2000000
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2020-08-10 19:31:07 +00:00
CONFIG_NR_DRAM_BANKS=1
env: Finish migration of common ENV options - In ARMv8 NXP Layerscape platforms we also need to make use of CONFIG_SYS_RELOC_GD_ENV_ADDR now, do so. - On ENV_IS_IN_REMOTE, CONFIG_ENV_OFFSET is never used, drop the define to 0. - Add Kconfig entry for ENV_ADDR. - Make ENV_ADDR / ENV_OFFSET depend on the env locations that use it. - Add ENV_xxx_REDUND options that depend on their primary option and SYS_REDUNDAND_ENVIRONMENT - On a number of PowerPC platforms, use SPL_ENV_ADDR not CONFIG_ENV_ADDR for the pre-main-U-Boot environment location. - On ENV_IS_IN_SPI_FLASH, check not for CONFIG_ENV_ADDR being set but rather it being non-zero, as it will now be zero by default. - Rework the env_offset absolute in env/embedded.o to not use CONFIG_ENV_OFFSET as it was the only use of ENV_OFFSET within ENV_IS_IN_FLASH. - Migrate all platforms. Cc: Wolfgang Denk <wd@denx.de> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: uboot-stm32@st-md-mailman.stormreply.com Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2019-11-19 01:02:10 +00:00
CONFIG_ENV_SIZE=0x20000
CONFIG_ENV_OFFSET=0x380000
arm: mx6: Make all i.MX6 SoCs user-selectable We have a number of platforms that are a combination of a carrier board and System-on-Module (SoM) that in turn allows for the board to have different SoCs on it. In some cases, this is handled via board-specific Kconfig options. In other cases we make use of CONFIG_SYS_EXTRA_OPTIONS. This latter case however can lead to invalid configurations as we will not in turn get options that in Kconfig are selected by or depend on that setting. To resolve this, make the SoC option a choice in Kconfig and make boards depend on what they can support. This change opens us up for further clean-ups in the cases where a single CONFIG_TARGET_xxx can support different SoCs and today they do not, or do not cleanly do so. Reported-by: Matt Porter <mporter@konsulko.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: "NXP i.MX U-Boot Team" <uboot-imx@nxp.com> Cc: Soeren Moch <smoch@web.de> Cc: Markus Niebel <Markus.Niebel@tq-group.com> Cc: Igor Opaniuk <igor.opaniuk@toradex.com> Cc: Heiko Schocher <hs@denx.de> Cc: Hannes Schmelzer <hannes.schmelzer@br-automation.com> Cc: Otavio Salvador <otavio@ossystems.com.br> Cc: Nikita Kiryanov <nikita@compulab.co.il> Cc: Andreas Geisreiter <ageisreiter@dh-electronics.de> Cc: Ludwig Zenz <lzenz@dh-electronics.de> Cc: Lukasz Majewski <lukma@denx.de> Cc: Akshay Bhat <akshaybhat@timesys.com> Cc: Ken Lin <Ken.Lin@advantech.com.tw> Cc: Ian Ray <ian.ray@ge.com> Cc: Tim Harvey <tharvey@gateworks.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Raffaele RECALCATI <raffaele.recalcati@bticino.it> Cc: Simone CIANNI <simone.cianni@bticino.it> Cc: Adam Ford <aford173@gmail.com> Cc: Marcin Niestroj <m.niestroj@grinn-global.com> Cc: "Eric Bénard" <eric@eukrea.com> Cc: Baruch Siach <baruch@tkos.co.il> Cc: Jason Liu <jason.hui.liu@nxp.com> Cc: Ye Li <ye.li@nxp.com> Cc: Eric Nelson <eric@nelint.com> Cc: Troy Kisky <troy.kisky@boundarydevices.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Parthiban Nallathambi <parthiban@linumiz.com> Cc: Marek Vasut <marex@denx.de> Cc: "Sébastien Szymanski" <sebastien.szymanski@armadeus.com> Cc: Christian Gmeiner <christian.gmeiner@gmail.com> Cc: Niel Fourie <lusus@denx.de> Cc: Martyn Welch <martyn.welch@collabora.com> Cc: Richard Hu <richard.hu@technexion.com> Cc: Stefan Roese <sr@denx.de> Cc: Boris Brezillon <bbrezillon@kernel.org> Cc: Arkadiusz Karas <arkadiusz.karas@somlabs.com> Cc: Breno Lima <breno.lima@nxp.com> Cc: Francesco Montefoschi <francesco.montefoschi@udoo.org> Cc: Silvio Fricke <open-source@softing.de> Tested-by: Matt Porter <mporter@konsulko.com> [colibri_imx6] Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Marcin Niestroj <m.niestroj@grinn-global.com>
2020-08-18 11:43:50 +00:00
CONFIG_MX6ULL=y
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2020-04-28 20:15:47 +00:00
CONFIG_TARGET_COLIBRI_IMX6ULL=y
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2020-01-22 18:38:00 +00:00
CONFIG_DM_GPIO=y
colibri-imx6ull: add emmc variant Add code to build the eMMC variant of the Colibri iMX6ULL, i.e. the 'Colibri iMX6ULL 1GB' which has a eMMC instead of the raw NAND used on other SKUs. Related-to: ELB-4056, ELB-4057 Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2021-10-06 16:55:36 +00:00
CONFIG_TARGET_COLIBRI_IMX6ULL_NAND=y
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2020-07-28 12:46:52 +00:00
CONFIG_DEFAULT_DEVICE_TREE="imx6ull-colibri"
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-01 14:33:18 +00:00
CONFIG_SYS_MEMTEST_START=0x80000000
CONFIG_SYS_MEMTEST_END=0x88000000
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2019-04-29 19:54:04 +00:00
CONFIG_DISTRO_DEFAULTS=y
board: toradex: add Colibri iMX6ULL support Add support for the Colibri iMX6ULL module which comes with on-board raw NAND. Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
2018-05-30 17:01:48 +00:00
CONFIG_FIT=y
configs: toradex: enable missing fit options Add missing support of FIT-images and enable a verbosity for this feature. Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com> Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2022-04-13 09:33:29 +00:00
CONFIG_FIT_VERBOSE=y
board: toradex: add Colibri iMX6ULL support Add support for the Colibri iMX6ULL module which comes with on-board raw NAND. Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
2018-05-30 17:01:48 +00:00
CONFIG_BOOTDELAY=1
Convert CONFIG_USE_BOOTCOMMAND et al to Kconfig This converts the following to Kconfig: CONFIG_USE_BOOTCOMMAND CONFIG_BOOTCOMMAND CONFIG_RAMBOOTCOMMAND CONFIG_NFSBOOTCOMMAND Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-10 14:11:40 +00:00
CONFIG_BOOTCOMMAND="run ubiboot || run distro_bootcmd;"
colibri-imx6ull: use preboot for fdtfile evaluation Enable and set preboot var with fdtfile evaluation. preboot will be checked and run immediately before starting the CONFIG_BOOTDELAY countdown and/or running the auto-boot command resp. entering interactive mode. This provides possibility to use different boot cmds in interactive mode without manual setting fdtfile value, as it it's already evaluated before entering interactive mode. Fixes: board: 31b1e17f44("toradex: add Colibri iMX6ULL support") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2020-09-14 08:01:08 +00:00
CONFIG_USE_PREBOOT=y
configs: tdx: Do not overwrite fdtfile if it got set manually In case a customer wants to set fdtfile currently preboot overrides it always with preboot just before the bootdelay. Use test -n to check if fdtfile is already set and only set it if nothing got touched manually Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2022-04-13 09:33:31 +00:00
CONFIG_PREBOOT="test -n ${fdtfile} || setenv fdtfile imx6ull-colibri${variant}-${fdt_board}.dtb"
board: toradex: add Colibri iMX6ULL support Add support for the Colibri iMX6ULL module which comes with on-board raw NAND. Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
2018-05-30 17:01:48 +00:00
CONFIG_SYS_CONSOLE_IS_IN_ENV=y
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_DISPLAY_BOARDINFO_LATE=y
CONFIG_SYS_PROMPT="Colibri iMX6ULL # "
Convert CONFIG_SYS_MAXARGS to Kconfig This converts the following to Kconfig: CONFIG_SYS_MAXARGS Signed-off-by: Tom Rini <trini@konsulko.com>
2022-05-11 20:21:06 +00:00
CONFIG_SYS_MAXARGS=32
Convert CONFIG_SYS_PBSIZE to Kconfig This converts the following to Kconfig: CONFIG_SYS_PBSIZE Signed-off-by: Tom Rini <trini@konsulko.com>
2022-05-11 21:38:09 +00:00
CONFIG_SYS_PBSIZE=547
Kconfig: Migrate CONFIG_BOOTM_* options Migrate all of the existing OS support options that are under CONFIG_BOOTM_* to Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
2019-09-20 21:36:50 +00:00
# CONFIG_BOOTM_PLAN9 is not set
# CONFIG_BOOTM_RTEMS is not set
colibri-imx6ull: configuration clean-up Drop disabling SPL_SYS_THUMB_BUILD as we anyway do not use SPL. Enbale CRC32 verify, USB SDP and EFI loader support. Drop CMD_GPT and disabling RANDOM_UUID. Do savedefconfig which drops USB_FUNCTION_SDP. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2019-04-09 15:24:13 +00:00
# CONFIG_CMD_ELF is not set
board: toradex: add Colibri iMX6ULL support Add support for the Colibri iMX6ULL module which comes with on-board raw NAND. Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
2018-05-30 17:01:48 +00:00
# CONFIG_CMD_IMI is not set
# CONFIG_CMD_XIMG is not set
CONFIG_CMD_ASKENV=y
colibri-imx6ull: configuration clean-up Drop disabling SPL_SYS_THUMB_BUILD as we anyway do not use SPL. Enbale CRC32 verify, USB SDP and EFI loader support. Drop CMD_GPT and disabling RANDOM_UUID. Do savedefconfig which drops USB_FUNCTION_SDP. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2019-04-09 15:24:13 +00:00
CONFIG_CRC32_VERIFY=y
board: toradex: add Colibri iMX6ULL support Add support for the Colibri iMX6ULL module which comes with on-board raw NAND. Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
2018-05-30 17:01:48 +00:00
CONFIG_CMD_MEMTEST=y
CONFIG_CMD_DFU=y
colibri-imx6ull: migrate pinctrl and regulators to dtb/dm Migrate pinctrl and regulators to device tree resp. driver model: Ethernet, NAND and UART. Drop BOARD_EARLY_INIT_F as it is anyway no longer used. Enable CMD_DM, CMD_MTD, CMD_REGULATOR and DM_REGULATOR_FIXED. While at it also update copyright period. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2019-04-09 15:24:14 +00:00
CONFIG_CMD_DM=y
board: toradex: add Colibri iMX6ULL support Add support for the Colibri iMX6ULL module which comes with on-board raw NAND. Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
2018-05-30 17:01:48 +00:00
CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
colibri-imx6ull: migrate pinctrl and regulators to dtb/dm Migrate pinctrl and regulators to device tree resp. driver model: Ethernet, NAND and UART. Drop BOARD_EARLY_INIT_F as it is anyway no longer used. Enable CMD_DM, CMD_MTD, CMD_REGULATOR and DM_REGULATOR_FIXED. While at it also update copyright period. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2019-04-09 15:24:14 +00:00
CONFIG_CMD_MTD=y
board: toradex: add Colibri iMX6ULL support Add support for the Colibri iMX6ULL module which comes with on-board raw NAND. Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
2018-05-30 17:01:48 +00:00
CONFIG_CMD_NAND_TRIMFFS=y
CONFIG_CMD_NAND_TORTURE=y
CONFIG_CMD_USB=y
colibri-imx6ull: configuration clean-up Drop disabling SPL_SYS_THUMB_BUILD as we anyway do not use SPL. Enbale CRC32 verify, USB SDP and EFI loader support. Drop CMD_GPT and disabling RANDOM_UUID. Do savedefconfig which drops USB_FUNCTION_SDP. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2019-04-09 15:24:13 +00:00
CONFIG_CMD_USB_SDP=y
board: toradex: add Colibri iMX6ULL support Add support for the Colibri iMX6ULL module which comes with on-board raw NAND. Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
2018-05-30 17:01:48 +00:00
CONFIG_CMD_USB_MASS_STORAGE=y
toradex: imx: enable BOOTCOUNT feature This introduces automatic boot counter that increases after every reset.After a power-on reset, it will be initialized with 1, and each reboot will increment the value by 1. By default it's disabled if bootlimit isn't set. To enable this feature you have set bootcount limit ("bootlimit"), alternate boot action ("altbootcmd") that will be performed if the new value of bootcount exceeds the value of bootlimit, and "upgrade_available" to let U-Boot automatically increase and save the counter value after every reset: > setenv bootlimit 5 > setenv upgrade_available 1 > setenv altbootcmd "bootm ..." In case the bootlimit exceeds, the message will be shown and albootcmd executed: Warning: Bootlimit (5) exceeded. Using altbootcmd. To reset bootcount run: > bootcount reset Print current value: > bootcount print Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2020-06-16 19:20:08 +00:00
CONFIG_CMD_BOOTCOUNT=y
board: toradex: add Colibri iMX6ULL support Add support for the Colibri iMX6ULL module which comes with on-board raw NAND. Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
2018-05-30 17:01:48 +00:00
CONFIG_CMD_CACHE=y
colibri-imx6ull: migrate pinctrl and regulators to dtb/dm Migrate pinctrl and regulators to device tree resp. driver model: Ethernet, NAND and UART. Drop BOARD_EARLY_INIT_F as it is anyway no longer used. Enable CMD_DM, CMD_MTD, CMD_REGULATOR and DM_REGULATOR_FIXED. While at it also update copyright period. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2019-04-09 15:24:14 +00:00
CONFIG_CMD_REGULATOR=y
configs: Migrate and re-enabled CONFIG_CMD_MTDPARTS Now that CMD_UBI does not select CMD_MTDPARTS we need to make platforms that had been enabling it turn it on by hand. This exposed that we had not yet migrated CMD_MTDPARTS fully, so do so now. Fixes: 86dfa556d927 ("cmd: ubi: Remove useless call to mtdparts_init()") Signed-off-by: Tom Rini <trini@konsulko.com>
2018-11-14 00:54:45 +00:00
CONFIG_CMD_MTDPARTS=y
Merge branch 'master' of git://git.denx.de/u-boot-imx trini: Update colibri-imx6ull to use Kconfig for mtdparts related options. Signed-off-by: Tom Rini <trini@konsulko.com>
2018-07-23 14:51:13 +00:00
CONFIG_MTDIDS_DEFAULT="nand0=gpmi-nand"
CONFIG_MTDPARTS_DEFAULT="mtdparts=gpmi-nand:512k(mx6ull-bcb),1536k(u-boot1)ro,1536k(u-boot2)ro,512k(u-boot-env),-(ubi)"
board: toradex: add Colibri iMX6ULL support Add support for the Colibri iMX6ULL module which comes with on-board raw NAND. Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
2018-05-30 17:01:48 +00:00
CONFIG_CMD_UBI=y
# CONFIG_ISO_PARTITION is not set
CONFIG_OF_CONTROL=y
Convert CONFIG_ENV_OVERWRITE to Kconfig This converts the following to Kconfig: CONFIG_ENV_OVERWRITE Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Rerun migration, remove some comments] Signed-off-by: Tom Rini <trini@konsulko.com>
2020-07-03 11:48:56 +00:00
CONFIG_ENV_OVERWRITE=y
board: toradex: add Colibri iMX6ULL support Add support for the Colibri iMX6ULL module which comes with on-board raw NAND. Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
2018-05-30 17:01:48 +00:00
CONFIG_ENV_IS_IN_NAND=y
env: Add CONFIG_SYS_RELOC_GD_ENV_ADDR symbol Today in initr_reloc_global_data() we use some non-obvious tests to determine if we need to relocate the env_addr within gd or not. In order to facilitate migration of other symbols to Kconfig we need to introduce a new symbol for this particular use case. Cc: Wolfgang Denk <wd@denx.de> Cc: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2019-11-13 03:46:36 +00:00
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
board: toradex: add Colibri iMX6ULL support Add support for the Colibri iMX6ULL module which comes with on-board raw NAND. Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
2018-05-30 17:01:48 +00:00
CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2020-10-09 16:22:06 +00:00
CONFIG_VERSION_VARIABLE=y
net: Convert CONFIG_IP_DEFRAG to Kconfig Convert CONFIG_IP_DEFRAG to Kconfig, update defconfigs, headers and whitelist. This patch is a follow-up on a patch by Christian Gmeiner with the added config/header/whitelist updates. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Reported-by: Christian Gmeiner <christian.gmeiner@gmail.com> Cc: Joe Hershberger <joe.hershberger@ni.com>
2019-06-11 02:51:14 +00:00
CONFIG_IP_DEFRAG=y
net: Convert CONFIG_TFTP_BLOCKSIZE to Kconfig Convert CONFIG_TFTP_BLOCKSIZE to Kconfig, update defconfigs, headers and whitelist. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Christian Gmeiner <christian.gmeiner@gmail.com> Cc: Joe Hershberger <joe.hershberger@ni.com>
2019-06-11 02:51:15 +00:00
CONFIG_TFTP_BLOCKSIZE=16352
net: convert TFTP_TSIZE to proper Kconfig option TFTP transfer size can be used to re-size the TFTP progress bar on single line based on the server reported file size. The support for this has been around from 2019, but it was never converted to proper Kconfig. While adding this new Kconfig, enable it by default for OMAP2+ and K3 devices also. Signed-off-by: Tero Kristo <kristo@kernel.org>
2021-05-12 08:03:04 +00:00
CONFIG_TFTP_TSIZE=y
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2020-10-09 16:22:06 +00:00
CONFIG_BOUNCE_BUFFER=y
toradex: imx: enable BOOTCOUNT feature This introduces automatic boot counter that increases after every reset.After a power-on reset, it will be initialized with 1, and each reboot will increment the value by 1. By default it's disabled if bootlimit isn't set. To enable this feature you have set bootcount limit ("bootlimit"), alternate boot action ("altbootcmd") that will be performed if the new value of bootcount exceeds the value of bootlimit, and "upgrade_available" to let U-Boot automatically increase and save the counter value after every reset: > setenv bootlimit 5 > setenv upgrade_available 1 > setenv altbootcmd "bootm ..." In case the bootlimit exceeds, the message will be shown and albootcmd executed: Warning: Bootlimit (5) exceeded. Using altbootcmd. To reset bootcount run: > bootcount reset Print current value: > bootcount print Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2020-06-16 19:20:08 +00:00
CONFIG_BOOTCOUNT_LIMIT=y
CONFIG_BOOTCOUNT_ENV=y
board: toradex: add Colibri iMX6ULL support Add support for the Colibri iMX6ULL module which comes with on-board raw NAND. Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
2018-05-30 17:01:48 +00:00
CONFIG_DFU_NAND=y
usb: dfu: Migrate CONFIG_SYS_DFU_DATA_BUF_SIZE and CONFIG_SYS_DFU_MAX_FILE_SIZE to Kconfig Currently the config options CONFIG_SYS_DFU_DATA_BUF_SIZE and CONFIG_SYS_DFU_MAX_FILE_SIZE are being set in include/configs/<board>.h files and also in <board_name>_defconfig files without a Kconfig option. It is easier for users to set these configs in defconfig files than in config header files as they are a part of the source code. Add Kconfig symbols, and update the defconfigs by using tools/moveconfig.py script. Suggested-by: Pratyush Yadav <p.yadav@ti.com> Signed-off-by: Aswath Govindraju <a-govindraju@ti.com> Acked-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com> Acked-by: Matthias Brugger <mbrugger@suse.com> Acked-by: Lukasz Majewski <lukma@denx.de>
2021-06-01 11:21:47 +00:00
CONFIG_SYS_DFU_DATA_BUF_SIZE=0x1000000
board: toradex: add Colibri iMX6ULL support Add support for the Colibri iMX6ULL module which comes with on-board raw NAND. Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
2018-05-30 17:01:48 +00:00
CONFIG_DM_I2C=y
CONFIG_SYS_I2C_MXC=y
Convert CONFIG_FSL_USDHC to Kconfig This converts the following to Kconfig: CONFIG_FSL_USDHC Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Add IMX8M, TARGET_S32V234EVB to FSL_USDHC list] Signed-off-by: Tom Rini <trini@konsulko.com>
2019-08-14 12:23:43 +00:00
CONFIG_FSL_USDHC=y
mtd: ensure MTD/the raw NAND core are compiled when there is a NAND flash Both symbols must be enabled when there is a raw NAND driver selected. Also enable them when CONFIG_CMD_NAND is selected to avoid breaking things when we'll further rework the MTD dependency description. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com> [trini: Rebase and migrate a few more boards here] Signed-off-by: Tom Rini <trini@konsulko.com>
2019-10-03 17:50:07 +00:00
CONFIG_MTD=y
mtd: rename CONFIG_MTD -> CONFIG_DM_MTD CONFIG_MTD must be reserved for the MTD core. Like any other subsystem, prefix the symbol by DM when it comes to DM support. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com> [trini: Add Kconfig files] Signed-off-by: Tom Rini <trini@konsulko.com>
2019-10-03 17:50:04 +00:00
CONFIG_DM_MTD=y
mtd: rename CONFIG_NAND -> CONFIG_MTD_RAW_NAND Add more clarity by changing the Kconfig entry name. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> [trini: Re-run migration, update a few more cases] Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>
2019-10-03 17:50:03 +00:00
CONFIG_MTD_RAW_NAND=y
mtd: nand: raw: Move CONFIG_SYS_NAND_USE_FLASH_BBT to Kconfig Convert CONFIG_SYS_NAND_USE_FLASH_BBT to Kconfig, update defconfigs, headers and whitelist. Please note that this symbol already was used in Kconfig (imply in CONFIG_NAND_ATMEL) which did not work, since this symbol was not available in Kconfig. This changes now with this patch and all boards with CONFIG_NAND_ATMEL will have BBT enabled. Which is what I also need on my GARDENA AT91SAM based board. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Eugen Hristev <eugen.hristev@microchip.com> Cc: Miquel Raynal <miquel.raynal@bootlin.com> Cc: Gregory CLEMENT <gregory.clement@bootlin.com> [trini: Rework such that the configs are unchanged to start with] Signed-off-by: Tom Rini <trini@konsulko.com>
2019-08-22 10:28:04 +00:00
CONFIG_SYS_NAND_USE_FLASH_BBT=y
board: toradex: add Colibri iMX6ULL support Add support for the Colibri iMX6ULL module which comes with on-board raw NAND. Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
2018-05-30 17:01:48 +00:00
CONFIG_NAND_MXS_DT=y
Convert CONFIG_SYS_NAND_ONFI_DETECTION to Kconfig This converts the following to Kconfig: CONFIG_SYS_NAND_ONFI_DETECTION Signed-off-by: Tom Rini <trini@konsulko.com>
2021-09-22 18:50:34 +00:00
CONFIG_SYS_NAND_ONFI_DETECTION=y
board: toradex: add Colibri iMX6ULL support Add support for the Colibri iMX6ULL module which comes with on-board raw NAND. Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
2018-05-30 17:01:48 +00:00
CONFIG_MTD_UBI_FASTMAP=y
CONFIG_PHYLIB=y
CONFIG_PHY_MICREL=y
configs: colibri-imx6ull/-emmc: use micrel ksz8xxx phy driver Use the Micrel KSZ8xxx specific Ethernet PHY driver rather than the generic one. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2022-04-08 10:28:15 +00:00
CONFIG_PHY_MICREL_KSZ8XXX=y
colibri-imx6ull: migrate fec to using driver model Migrate Ethernet FEC to using driver model. Drop PHY_MICREL_KSZ90X1 which slipped in from Apalis iMX6. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2019-04-09 15:24:17 +00:00
CONFIG_DM_ETH=y
board: toradex: add Colibri iMX6ULL support Add support for the Colibri iMX6ULL module which comes with on-board raw NAND. Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
2018-05-30 17:01:48 +00:00
CONFIG_FEC_MXC=y
Convert CONFIG_MII et al to Kconfig This converts the following to Kconfig: CONFIG_MII CONFIG_DRIVER_TI_EMAC Signed-off-by: Adam Ford <aford173@gmail.com> Acked-by: Jagan Teki <jagan@amarulasolutions.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-07-21 04:03:57 +00:00
CONFIG_MII=y
board: toradex: add Colibri iMX6ULL support Add support for the Colibri iMX6ULL module which comes with on-board raw NAND. Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
2018-05-30 17:01:48 +00:00
CONFIG_PINCTRL=y
CONFIG_PINCTRL_IMX6=y
CONFIG_DM_REGULATOR=y
colibri-imx6ull: migrate pinctrl and regulators to dtb/dm Migrate pinctrl and regulators to device tree resp. driver model: Ethernet, NAND and UART. Drop BOARD_EARLY_INIT_F as it is anyway no longer used. Enable CMD_DM, CMD_MTD, CMD_REGULATOR and DM_REGULATOR_FIXED. While at it also update copyright period. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2019-04-09 15:24:14 +00:00
CONFIG_DM_REGULATOR_FIXED=y
board: toradex: add Colibri iMX6ULL support Add support for the Colibri iMX6ULL module which comes with on-board raw NAND. Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
2018-05-30 17:01:48 +00:00
CONFIG_DM_SERIAL=y
CONFIG_MXC_UART=y
configs: migrate CONFIG_IMX_THERMAL to defconfigs Done via moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2020-10-30 01:22:03 +00:00
CONFIG_IMX_THERMAL=y
board: toradex: add Colibri iMX6ULL support Add support for the Colibri iMX6ULL module which comes with on-board raw NAND. Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
2018-05-30 17:01:48 +00:00
CONFIG_USB=y
CONFIG_USB_GADGET=y
CONFIG_USB_GADGET_MANUFACTURER="Toradex"
CONFIG_USB_GADGET_VENDOR_NUM=0x1b67
CONFIG_USB_GADGET_PRODUCT_NUM=0x4000
CONFIG_CI_UDC=y
CONFIG_USB_GADGET_DOWNLOAD=y
CONFIG_OF_LIBFDT_OVERLAY=y
CONFIG_FDT_FIXUP_PARTITIONS=y
Reference in a new issue Copy permalink