u-boot/arch/arm/dts/stm32mp15-scmi.dtsi

110 lines
2 KiB
Text
Raw Normal View History

ARM: dts: stm32mp15: alignment with v5.19 Device tree alignment with Linux kernel v5.19-rc1 - ARM: dts: stm32: Add alternate pinmux for ethernet0 pins - ARM: dts: stm32: Add alternate pinmux for mco2 pins - ARM: dts: stm32: fix pinctrl node name warnings (MPU soc) - ARM: dts: stm32: stm32mp15-pinctrl: add spi1-1 pinmux group - dt-bindings: clock: add IDs for SCMI clocks on stm32mp15 - dt-bindings: reset: add IDs for SCMI reset domains on stm32mp15 - dt-bindings: clock: stm32mp15: rename CK_SCMI define - dt-bindings: reset: stm32mp15: rename RST_SCMI define - dt-bindings: reset: add MCU HOLD BOOT ID for SCMI reset domains on stm32mp15 - dt-bindings: clk: cleanup comments - ARM: dts: align SPI NOR node name with dtschema - ARM: dts: stm32: enable optee firmware and SCMI support on STM32MP15 - ARM: dts: stm32: Add SCMI version of STM32 boards (DK1/DK2/ED1/EV1) - ARM: dts: stm32: move SCMI related nodes in a dedicated file for stm32mp15 + patch from stm32-dt-for-v5.19-fixes-2 - ARM: dts: stm32: move SCMI related nodes in a dedicated file for stm32mp15 - ARM: dts: stm32: fix pwr regulators references to use scmi - ARM: dts: stm32: use the correct clock source for CEC on stm32mp151 - ARM: dts: stm32: DSI should use LSE SCMI clock on DK1/ED1 STM32 board - ARM: dts: stm32: delete fixed clock node on STM32MP15-SCMI - ARM: dts: stm32: add missing usbh clock and fix clk order on stm32mp15 Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2022-07-05 14:55:54 +00:00
// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
/*
* Copyright (C) STMicroelectronics 2022 - All Rights Reserved
* Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics.
*/
/ {
firmware {
optee: optee {
compatible = "linaro,optee-tz";
method = "smc";
};
scmi: scmi {
compatible = "linaro,scmi-optee";
#address-cells = <1>;
#size-cells = <0>;
linaro,optee-channel-id = <0>;
shmem = <&scmi_shm>;
scmi_clk: protocol@14 {
reg = <0x14>;
#clock-cells = <1>;
};
scmi_reset: protocol@16 {
reg = <0x16>;
#reset-cells = <1>;
};
scmi_voltd: protocol@17 {
reg = <0x17>;
scmi_reguls: regulators {
#address-cells = <1>;
#size-cells = <0>;
scmi_reg11: reg11@0 {
reg = <0>;
regulator-name = "reg11";
regulator-min-microvolt = <1100000>;
regulator-max-microvolt = <1100000>;
};
scmi_reg18: reg18@1 {
voltd-name = "reg18";
reg = <1>;
regulator-name = "reg18";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
scmi_usb33: usb33@2 {
reg = <2>;
regulator-name = "usb33";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
};
};
};
};
soc {
scmi_sram: sram@2ffff000 {
compatible = "mmio-sram";
reg = <0x2ffff000 0x1000>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x2ffff000 0x1000>;
scmi_shm: scmi-sram@0 {
compatible = "arm,scmi-shmem";
reg = <0 0x80>;
};
};
};
};
&reg11 {
status = "disabled";
};
&reg18 {
status = "disabled";
};
&usb33 {
status = "disabled";
};
&usbotg_hs {
usb33d-supply = <&scmi_usb33>;
};
&usbphyc {
vdda1v1-supply = <&scmi_reg11>;
vdda1v8-supply = <&scmi_reg18>;
};
/delete-node/ &clk_hse;
/delete-node/ &clk_hsi;
/delete-node/ &clk_lse;
/delete-node/ &clk_lsi;
/delete-node/ &clk_csi;
/delete-node/ &reg11;
/delete-node/ &reg18;
/delete-node/ &usb33;
/delete-node/ &pwr_regulators;