u-boot/drivers/pwm/pwm-at91.c

208 lines
4.7 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0+
/*
* PWM support for Microchip AT91 architectures.
*
* Copyright (C) 2021 Microchip Technology Inc. and its subsidiaries
*
* Author: Dan Sneddon <daniel.sneddon@microchip.com>
*
* Based on drivers/pwm/pwm-atmel.c from Linux.
*/
#include <clk.h>
#include <common.h>
#include <div64.h>
#include <dm.h>
#include <linux/bitops.h>
#include <linux/io.h>
#include <pwm.h>
#define PERIOD_BITS 16
#define PWM_MAX_PRES 10
#define NSEC_PER_SEC 1000000000L
#define PWM_ENA 0x04
#define PWM_CHANNEL_OFFSET 0x20
#define PWM_CMR 0x200
#define PWM_CMR_CPRE_MSK GENMASK(3, 0)
#define PWM_CMR_CPOL BIT(9)
#define PWM_CDTY 0x204
#define PWM_CPRD 0x20C
struct at91_pwm_priv {
void __iomem *base;
struct clk pclk;
u32 clkrate;
};
static int at91_pwm_calculate_cprd_and_pres(struct udevice *dev,
unsigned long clkrate,
uint period_ns, uint duty_ns,
unsigned long *cprd, u32 *pres)
{
u64 cycles = period_ns;
int shift;
/* Calculate the period cycles and prescale value */
cycles *= clkrate;
do_div(cycles, NSEC_PER_SEC);
/*
* The register for the period length is period_bits bits wide.
* So for each bit the number of clock cycles is wider divide the input
* clock frequency by two using pres and shift cprd accordingly.
*/
shift = fls(cycles) - PERIOD_BITS;
if (shift > PWM_MAX_PRES) {
return -EINVAL;
} else if (shift > 0) {
*pres = shift;
cycles >>= *pres;
} else {
*pres = 0;
}
*cprd = cycles;
return 0;
}
static void at91_pwm_calculate_cdty(uint period_ns, uint duty_ns,
unsigned long clkrate, unsigned long cprd,
u32 pres, unsigned long *cdty)
{
u64 cycles = duty_ns;
cycles *= clkrate;
do_div(cycles, NSEC_PER_SEC);
cycles >>= pres;
*cdty = cprd - cycles;
}
/**
* Returns: channel status after set operation
*/
static bool at91_pwm_set(void __iomem *base, uint channel, bool enable)
{
u32 val, cur_status;
val = ioread32(base + PWM_ENA);
cur_status = !!(val & BIT(channel));
/* if channel is already in that state, do nothing */
if (!(enable ^ cur_status))
return cur_status;
if (enable)
val |= BIT(channel);
else
val &= ~(BIT(channel));
iowrite32(val, base + PWM_ENA);
return cur_status;
}
static int at91_pwm_set_enable(struct udevice *dev, uint channel, bool enable)
{
struct at91_pwm_priv *priv = dev_get_priv(dev);
at91_pwm_set(priv->base, channel, enable);
return 0;
}
static int at91_pwm_set_config(struct udevice *dev, uint channel,
uint period_ns, uint duty_ns)
{
struct at91_pwm_priv *priv = dev_get_priv(dev);
unsigned long cprd, cdty;
u32 pres, val;
int channel_enabled;
int ret;
ret = at91_pwm_calculate_cprd_and_pres(dev, priv->clkrate, period_ns,
duty_ns, &cprd, &pres);
if (ret)
return ret;
at91_pwm_calculate_cdty(period_ns, duty_ns, priv->clkrate, cprd, pres, &cdty);
/* disable the channel */
channel_enabled = at91_pwm_set(priv->base, channel, false);
/* It is necessary to preserve CPOL, inside CMR */
val = ioread32(priv->base + (channel * PWM_CHANNEL_OFFSET) + PWM_CMR);
val = (val & ~PWM_CMR_CPRE_MSK) | (pres & PWM_CMR_CPRE_MSK);
iowrite32(val, priv->base + (channel * PWM_CHANNEL_OFFSET) + PWM_CMR);
iowrite32(cprd, priv->base + (channel * PWM_CHANNEL_OFFSET) + PWM_CPRD);
iowrite32(cdty, priv->base + (channel * PWM_CHANNEL_OFFSET) + PWM_CDTY);
/* renable the channel if needed */
if (channel_enabled)
at91_pwm_set(priv->base, channel, true);
return 0;
}
static int at91_pwm_set_invert(struct udevice *dev, uint channel,
bool polarity)
{
struct at91_pwm_priv *priv = dev_get_priv(dev);
u32 val;
val = ioread32(priv->base + (channel * PWM_CHANNEL_OFFSET) + PWM_CMR);
if (polarity)
val |= PWM_CMR_CPOL;
else
val &= ~PWM_CMR_CPOL;
iowrite32(val, priv->base + (channel * PWM_CHANNEL_OFFSET) + PWM_CMR);
return 0;
}
static int at91_pwm_probe(struct udevice *dev)
{
struct at91_pwm_priv *priv = dev_get_priv(dev);
int ret;
priv->base = dev_read_addr_ptr(dev);
if (!priv->base)
return -EINVAL;
ret = clk_get_by_index(dev, 0, &priv->pclk);
if (ret)
return ret;
/* clocks aren't ref-counted so just enabled them once here */
ret = clk_enable(&priv->pclk);
if (ret)
return ret;
priv->clkrate = clk_get_rate(&priv->pclk);
return ret;
}
static const struct pwm_ops at91_pwm_ops = {
.set_config = at91_pwm_set_config,
.set_enable = at91_pwm_set_enable,
.set_invert = at91_pwm_set_invert,
};
static const struct udevice_id at91_pwm_of_match[] = {
{ .compatible = "atmel,sama5d2-pwm" },
{ }
};
U_BOOT_DRIVER(at91_pwm) = {
.name = "at91_pwm",
.id = UCLASS_PWM,
.of_match = at91_pwm_of_match,
.probe = at91_pwm_probe,
.priv_auto = sizeof(struct at91_pwm_priv),
.ops = &at91_pwm_ops,
};