u-boot/include/config_distro_bootcmd.h

541 lines
20 KiB
C
Raw Normal View History

/* SPDX-License-Identifier: GPL-2.0+ */
2014-07-30 22:37:14 +00:00
/*
* (C) Copyright 2014
* NVIDIA Corporation <www.nvidia.com>
*
* Copyright 2014 Red Hat, Inc.
*/
#ifndef _CONFIG_CMD_DISTRO_BOOTCMD_H
#define _CONFIG_CMD_DISTRO_BOOTCMD_H
/*
* A note on error handling: It is possible for BOOT_TARGET_DEVICES to
* reference a device that is not enabled in the U-Boot configuration, e.g.
* it may include MMC in the list without CONFIG_CMD_MMC being enabled. Given
* that BOOT_TARGET_DEVICES is a macro that's expanded by the C pre-processor
* at compile time, it's not possible to detect and report such problems via
* a simple #ifdef/#error combination. Still, the code needs to report errors.
* The best way I've found to do this is to make BOOT_TARGET_DEVICES expand to
* reference a non-existent symbol, and have the name of that symbol encode
* the error message. Consequently, this file contains references to e.g.
* BOOT_TARGET_DEVICES_references_MMC_without_CONFIG_CMD_MMC. Given the
* prevalence of capitals here, this looks like a pre-processor macro and
* hence seems like it should be all capitals, but it's really an error
* message that includes some other pre-processor symbols in the text.
*/
2014-07-30 22:37:14 +00:00
#define BOOTENV_SHARED_BLKDEV_BODY(devtypel) \
"if " #devtypel " dev ${devnum}; then " \
"devtype=" #devtypel "; " \
"run scan_dev_for_boot_part; " \
2014-07-30 22:37:14 +00:00
"fi\0"
#define BOOTENV_SHARED_BLKDEV(devtypel) \
#devtypel "_boot=" \
BOOTENV_SHARED_BLKDEV_BODY(devtypel)
#define BOOTENV_DEV_BLKDEV(devtypeu, devtypel, instance) \
"bootcmd_" #devtypel #instance "=" \
"devnum=" #instance "; " \
2014-07-30 22:37:14 +00:00
"run " #devtypel "_boot\0"
#define BOOTENV_DEV_NAME_BLKDEV(devtypeu, devtypel, instance) \
#devtypel #instance " "
#ifdef CONFIG_SANDBOX
#define BOOTENV_SHARED_HOST BOOTENV_SHARED_BLKDEV(host)
#define BOOTENV_DEV_HOST BOOTENV_DEV_BLKDEV
#define BOOTENV_DEV_NAME_HOST BOOTENV_DEV_NAME_BLKDEV
#else
#define BOOTENV_SHARED_HOST
#define BOOTENV_DEV_HOST \
BOOT_TARGET_DEVICES_references_HOST_without_CONFIG_SANDBOX
#define BOOTENV_DEV_NAME_HOST \
BOOT_TARGET_DEVICES_references_HOST_without_CONFIG_SANDBOX
#endif
2014-07-30 22:37:14 +00:00
#ifdef CONFIG_CMD_MMC
#define BOOTENV_SHARED_MMC BOOTENV_SHARED_BLKDEV(mmc)
#define BOOTENV_DEV_MMC BOOTENV_DEV_BLKDEV
#define BOOTENV_DEV_NAME_MMC BOOTENV_DEV_NAME_BLKDEV
#else
#define BOOTENV_SHARED_MMC
#define BOOTENV_DEV_MMC \
BOOT_TARGET_DEVICES_references_MMC_without_CONFIG_CMD_MMC
#define BOOTENV_DEV_NAME_MMC \
BOOT_TARGET_DEVICES_references_MMC_without_CONFIG_CMD_MMC
#endif
#ifdef CONFIG_CMD_UBIFS
#define BOOTENV_SHARED_UBIFS \
"ubifs_boot=" \
"if ubi part ${bootubipart} ${bootubioff} && " \
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
2022-05-31 08:32:36 +00:00
"ubifsmount ubi0:${bootubivol}; " \
"then " \
"devtype=ubi; " \
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
2022-05-31 08:32:36 +00:00
"devnum=ubi0; " \
"bootfstype=ubifs; " \
"distro_bootpart=${bootubivol}; " \
"run scan_dev_for_boot; " \
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
2022-05-31 08:32:36 +00:00
"ubifsumount; " \
"fi\0"
#define BOOTENV_DEV_UBIFS_BOOTUBIOFF(off) #off /* type check, throw error when called with more args */
#define BOOTENV_DEV_UBIFS(devtypeu, devtypel, instance, bootubipart, bootubivol, ...) \
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
2022-05-31 08:32:36 +00:00
"bootcmd_ubifs" #instance "=" \
"bootubipart=" #bootubipart "; " \
"bootubivol=" #bootubivol "; " \
"bootubioff=" BOOTENV_DEV_UBIFS_BOOTUBIOFF(__VA_ARGS__) "; " \
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
2022-05-31 08:32:36 +00:00
"run ubifs_boot\0"
#define BOOTENV_DEV_NAME_UBIFS(devtypeu, devtypel, instance, ...) \
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
2022-05-31 08:32:36 +00:00
#devtypel #instance " "
#else
#define BOOTENV_SHARED_UBIFS
#define BOOTENV_DEV_UBIFS \
BOOT_TARGET_DEVICES_references_UBIFS_without_CONFIG_CMD_UBIFS
#define BOOTENV_DEV_NAME_UBIFS \
BOOT_TARGET_DEVICES_references_UBIFS_without_CONFIG_CMD_UBIFS
#endif
#ifdef CONFIG_EFI_LOADER
#if defined(CONFIG_ARM64)
#define BOOTEFI_NAME "bootaa64.efi"
#elif defined(CONFIG_ARM)
#define BOOTEFI_NAME "bootarm.efi"
#elif defined(CONFIG_X86_RUN_32BIT)
#define BOOTEFI_NAME "bootia32.efi"
#elif defined(CONFIG_X86_RUN_64BIT)
#define BOOTEFI_NAME "bootx64.efi"
#elif defined(CONFIG_ARCH_RV32I)
#define BOOTEFI_NAME "bootriscv32.efi"
#elif defined(CONFIG_ARCH_RV64I)
#define BOOTEFI_NAME "bootriscv64.efi"
#endif
#endif
#ifdef BOOTEFI_NAME
#if defined(CONFIG_ARM) && !defined(CONFIG_ARM64)
/*
* On 32bit ARM systems there is a reasonable number of systems that follow
* the $soc-$board$boardver.dtb name scheme for their device trees. Use that
* scheme if we don't have an explicit fdtfile variable.
*/
#define BOOTENV_EFI_SET_FDTFILE_FALLBACK \
"if test -z \"${fdtfile}\" -a -n \"${soc}\"; then " \
"setenv efi_fdtfile ${soc}-${board}${boardver}.dtb; " \
"fi; "
#else
#ifndef BOOTENV_EFI_SET_FDTFILE_FALLBACK
#define BOOTENV_EFI_SET_FDTFILE_FALLBACK
#endif
#endif
#ifdef CONFIG_CMD_BOOTEFI_BOOTMGR
#define BOOTENV_EFI_BOOTMGR \
"boot_efi_bootmgr=" \
"if fdt addr -q ${fdt_addr_r}; then " \
"bootefi bootmgr ${fdt_addr_r};" \
"else " \
"bootefi bootmgr;" \
"fi\0"
#else
#define BOOTENV_EFI_BOOTMGR
#endif
#define BOOTENV_SHARED_EFI \
BOOTENV_EFI_BOOTMGR \
\
"boot_efi_binary=" \
"load ${devtype} ${devnum}:${distro_bootpart} " \
"${kernel_addr_r} efi/boot/"BOOTEFI_NAME"; " \
"if fdt addr -q ${fdt_addr_r}; then " \
"bootefi ${kernel_addr_r} ${fdt_addr_r};" \
"else " \
"bootefi ${kernel_addr_r} ${fdtcontroladdr};" \
"fi\0" \
\
"load_efi_dtb=" \
"load ${devtype} ${devnum}:${distro_bootpart} " \
"${fdt_addr_r} ${prefix}${efi_fdtfile}\0" \
\
"efi_dtb_prefixes=/ /dtb/ /dtb/current/\0" \
"scan_dev_for_efi=" \
"setenv efi_fdtfile ${fdtfile}; " \
BOOTENV_EFI_SET_FDTFILE_FALLBACK \
BOOTENV_RUN_EXTENSION_INIT \
"for prefix in ${efi_dtb_prefixes}; do " \
"if test -e ${devtype} " \
"${devnum}:${distro_bootpart} " \
"${prefix}${efi_fdtfile}; then " \
"run load_efi_dtb; " \
BOOTENV_RUN_EXTENSION_APPLY \
"fi;" \
"done;" \
"run boot_efi_bootmgr;" \
"if test -e ${devtype} ${devnum}:${distro_bootpart} " \
"efi/boot/"BOOTEFI_NAME"; then " \
"echo Found EFI removable media binary " \
"efi/boot/"BOOTEFI_NAME"; " \
"run boot_efi_binary; " \
"echo EFI LOAD FAILED: continuing...; " \
"fi; " \
"setenv efi_fdtfile\0"
#define SCAN_DEV_FOR_EFI "run scan_dev_for_efi;"
#else
#define BOOTENV_SHARED_EFI
#define SCAN_DEV_FOR_EFI
#endif
#ifdef CONFIG_SATA
2014-07-30 22:37:14 +00:00
#define BOOTENV_SHARED_SATA BOOTENV_SHARED_BLKDEV(sata)
#define BOOTENV_DEV_SATA BOOTENV_DEV_BLKDEV
#define BOOTENV_DEV_NAME_SATA BOOTENV_DEV_NAME_BLKDEV
#else
#define BOOTENV_SHARED_SATA
#define BOOTENV_DEV_SATA \
BOOT_TARGET_DEVICES_references_SATA_without_CONFIG_SATA
2014-07-30 22:37:14 +00:00
#define BOOTENV_DEV_NAME_SATA \
BOOT_TARGET_DEVICES_references_SATA_without_CONFIG_SATA
2014-07-30 22:37:14 +00:00
#endif
#ifdef CONFIG_NVME
#define BOOTENV_RUN_NVME_INIT "run nvme_init; "
#define BOOTENV_SET_NVME_NEED_INIT "setenv nvme_need_init; "
#define BOOTENV_SHARED_NVME \
"nvme_init=" \
"if ${nvme_need_init}; then " \
"setenv nvme_need_init false; " \
"nvme scan; " \
"fi\0" \
\
"nvme_boot=" \
BOOTENV_RUN_PCI_ENUM \
BOOTENV_RUN_NVME_INIT \
BOOTENV_SHARED_BLKDEV_BODY(nvme)
#define BOOTENV_DEV_NVME BOOTENV_DEV_BLKDEV
#define BOOTENV_DEV_NAME_NVME BOOTENV_DEV_NAME_BLKDEV
#else
#define BOOTENV_RUN_NVME_INIT
#define BOOTENV_SET_NVME_NEED_INIT
#define BOOTENV_SHARED_NVME
#define BOOTENV_DEV_NVME \
BOOT_TARGET_DEVICES_references_NVME_without_CONFIG_NVME
#define BOOTENV_DEV_NAME_NVME \
BOOT_TARGET_DEVICES_references_NVME_without_CONFIG_NVME
#endif
#ifdef CONFIG_SCSI
#define BOOTENV_RUN_SCSI_INIT "run scsi_init; "
#define BOOTENV_SET_SCSI_NEED_INIT "scsi_need_init=; "
#define BOOTENV_SHARED_SCSI \
"scsi_init=" \
"if ${scsi_need_init}; then " \
"scsi_need_init=false; " \
"scsi scan; " \
"fi\0" \
\
"scsi_boot=" \
BOOTENV_RUN_PCI_ENUM \
BOOTENV_RUN_SCSI_INIT \
BOOTENV_SHARED_BLKDEV_BODY(scsi)
2014-07-30 22:37:14 +00:00
#define BOOTENV_DEV_SCSI BOOTENV_DEV_BLKDEV
#define BOOTENV_DEV_NAME_SCSI BOOTENV_DEV_NAME_BLKDEV
#else
#define BOOTENV_RUN_SCSI_INIT
#define BOOTENV_SET_SCSI_NEED_INIT
2014-07-30 22:37:14 +00:00
#define BOOTENV_SHARED_SCSI
#define BOOTENV_DEV_SCSI \
BOOT_TARGET_DEVICES_references_SCSI_without_CONFIG_SCSI
2014-07-30 22:37:14 +00:00
#define BOOTENV_DEV_NAME_SCSI \
BOOT_TARGET_DEVICES_references_SCSI_without_CONFIG_SCSI
2014-07-30 22:37:14 +00:00
#endif
#ifdef CONFIG_IDE
#define BOOTENV_RUN_IDE_INIT "run ide_init; "
#define BOOTENV_SET_IDE_NEED_INIT "setenv ide_need_init; "
#define BOOTENV_SHARED_IDE \
"ide_init=" \
"if ${ide_need_init}; then " \
"setenv ide_need_init false; " \
"ide reset; " \
"fi\0" \
\
"ide_boot=" \
BOOTENV_RUN_IDE_INIT \
BOOTENV_SHARED_BLKDEV_BODY(ide)
2014-07-30 22:37:14 +00:00
#define BOOTENV_DEV_IDE BOOTENV_DEV_BLKDEV
#define BOOTENV_DEV_NAME_IDE BOOTENV_DEV_NAME_BLKDEV
#else
#define BOOTENV_RUN_IDE_INIT
#define BOOTENV_SET_IDE_NEED_INIT
2014-07-30 22:37:14 +00:00
#define BOOTENV_SHARED_IDE
#define BOOTENV_DEV_IDE \
BOOT_TARGET_DEVICES_references_IDE_without_CONFIG_IDE
2014-07-30 22:37:14 +00:00
#define BOOTENV_DEV_NAME_IDE \
BOOT_TARGET_DEVICES_references_IDE_without_CONFIG_IDE
2014-07-30 22:37:14 +00:00
#endif
#if defined(CONFIG_PCI)
#define BOOTENV_RUN_PCI_ENUM "run boot_pci_enum; "
#define BOOTENV_SHARED_PCI \
"boot_pci_enum=pci enum\0"
#else
#define BOOTENV_RUN_PCI_ENUM
#define BOOTENV_SHARED_PCI
#endif
2014-07-30 22:37:14 +00:00
#ifdef CONFIG_CMD_USB
#define BOOTENV_RUN_NET_USB_START "run boot_net_usb_start; "
2014-07-30 22:37:14 +00:00
#define BOOTENV_SHARED_USB \
"boot_net_usb_start=usb start\0" \
2014-07-30 22:37:14 +00:00
"usb_boot=" \
"usb start; " \
2014-07-30 22:37:14 +00:00
BOOTENV_SHARED_BLKDEV_BODY(usb)
#define BOOTENV_DEV_USB BOOTENV_DEV_BLKDEV
#define BOOTENV_DEV_NAME_USB BOOTENV_DEV_NAME_BLKDEV
#else
#define BOOTENV_RUN_NET_USB_START
2014-07-30 22:37:14 +00:00
#define BOOTENV_SHARED_USB
#define BOOTENV_DEV_USB \
BOOT_TARGET_DEVICES_references_USB_without_CONFIG_CMD_USB
#define BOOTENV_DEV_NAME_USB \
BOOT_TARGET_DEVICES_references_USB_without_CONFIG_CMD_USB
#endif
#ifdef CONFIG_CMD_VIRTIO
#define BOOTENV_RUN_VIRTIO_INIT "run virtio_init; "
#define BOOTENV_SET_VIRTIO_NEED_INIT "virtio_need_init=; "
#define BOOTENV_SHARED_VIRTIO \
"virtio_init=" \
"if ${virtio_need_init}; then " \
"virtio_need_init=false; " \
"virtio scan; " \
"fi\0" \
\
"virtio_boot=" \
BOOTENV_RUN_PCI_ENUM \
BOOTENV_RUN_VIRTIO_INIT \
BOOTENV_SHARED_BLKDEV_BODY(virtio)
#define BOOTENV_DEV_VIRTIO BOOTENV_DEV_BLKDEV
#define BOOTENV_DEV_NAME_VIRTIO BOOTENV_DEV_NAME_BLKDEV
#else
#define BOOTENV_RUN_VIRTIO_INIT
#define BOOTENV_SET_VIRTIO_NEED_INIT
#define BOOTENV_SHARED_VIRTIO
#define BOOTENV_DEV_VIRTIO \
BOOT_TARGET_DEVICES_references_VIRTIO_without_CONFIG_CMD_VIRTIO
#define BOOTENV_DEV_NAME_VIRTIO \
BOOT_TARGET_DEVICES_references_VIRTIO_without_CONFIG_CMD_VIRTIO
#endif
2014-07-30 22:37:14 +00:00
#if defined(CONFIG_CMD_DHCP)
#if defined(CONFIG_EFI_LOADER)
/* http://www.iana.org/assignments/dhcpv6-parameters/dhcpv6-parameters.xml */
#if defined(CONFIG_ARM64) || defined(__aarch64__)
#define BOOTENV_EFI_PXE_ARCH "0xb"
#define BOOTENV_EFI_PXE_VCI "PXEClient:Arch:00011:UNDI:003000"
#elif defined(CONFIG_ARM) || defined(__arm__)
#define BOOTENV_EFI_PXE_ARCH "0xa"
#define BOOTENV_EFI_PXE_VCI "PXEClient:Arch:00010:UNDI:003000"
#elif defined(CONFIG_X86) || defined(__x86_64__)
#define BOOTENV_EFI_PXE_ARCH "0x7"
#define BOOTENV_EFI_PXE_VCI "PXEClient:Arch:00007:UNDI:003000"
#elif defined(__i386__)
#define BOOTENV_EFI_PXE_ARCH "0x6"
#define BOOTENV_EFI_PXE_VCI "PXEClient:Arch:00006:UNDI:003000"
#elif defined(CONFIG_ARCH_RV32I) || ((defined(__riscv) && __riscv_xlen == 32))
#define BOOTENV_EFI_PXE_ARCH "0x19"
#define BOOTENV_EFI_PXE_VCI "PXEClient:Arch:00025:UNDI:003000"
#elif defined(CONFIG_ARCH_RV64I) || ((defined(__riscv) && __riscv_xlen == 64))
#define BOOTENV_EFI_PXE_ARCH "0x1b"
#define BOOTENV_EFI_PXE_VCI "PXEClient:Arch:00027:UNDI:003000"
#elif defined(CONFIG_SANDBOX)
# error "sandbox EFI support is only supported on ARM and x86"
#else
#error Please specify an EFI client identifier
#endif
/*
* Ask the dhcp server for an EFI binary. If we get one, check for a
* device tree in the same folder. Then boot everything. If the file was
* not an EFI binary, we just return from the bootefi command and continue.
*/
#define BOOTENV_EFI_RUN_DHCP \
"setenv efi_fdtfile ${fdtfile}; " \
BOOTENV_EFI_SET_FDTFILE_FALLBACK \
"setenv efi_old_vci ${bootp_vci};" \
"setenv efi_old_arch ${bootp_arch};" \
"setenv bootp_vci " BOOTENV_EFI_PXE_VCI ";" \
"setenv bootp_arch " BOOTENV_EFI_PXE_ARCH ";" \
"if dhcp ${kernel_addr_r}; then " \
"tftpboot ${fdt_addr_r} dtb/${efi_fdtfile};" \
"if fdt addr -q ${fdt_addr_r}; then " \
"bootefi ${kernel_addr_r} ${fdt_addr_r}; " \
"else " \
"bootefi ${kernel_addr_r} ${fdtcontroladdr};" \
"fi;" \
"fi;" \
"setenv bootp_vci ${efi_old_vci};" \
"setenv bootp_arch ${efi_old_arch};" \
"setenv efi_fdtfile;" \
"setenv efi_old_arch;" \
"setenv efi_old_vci;"
#else
#define BOOTENV_EFI_RUN_DHCP
#endif
2014-07-30 22:37:14 +00:00
#define BOOTENV_DEV_DHCP(devtypeu, devtypel, instance) \
"bootcmd_dhcp=" \
"devtype=" #devtypel "; " \
BOOTENV_RUN_NET_USB_START \
BOOTENV_RUN_PCI_ENUM \
"if dhcp ${scriptaddr} ${boot_script_dhcp}; then " \
2014-07-30 22:37:14 +00:00
"source ${scriptaddr}; " \
"fi;" \
BOOTENV_EFI_RUN_DHCP \
"\0"
2014-07-30 22:37:14 +00:00
#define BOOTENV_DEV_NAME_DHCP(devtypeu, devtypel, instance) \
"dhcp "
#else
#define BOOTENV_DEV_DHCP \
BOOT_TARGET_DEVICES_references_DHCP_without_CONFIG_CMD_DHCP
#define BOOTENV_DEV_NAME_DHCP \
BOOT_TARGET_DEVICES_references_DHCP_without_CONFIG_CMD_DHCP
#endif
#if defined(CONFIG_CMD_DHCP) && defined(CONFIG_CMD_PXE)
#define BOOTENV_DEV_PXE(devtypeu, devtypel, instance) \
"bootcmd_pxe=" \
BOOTENV_RUN_NET_USB_START \
BOOTENV_RUN_PCI_ENUM \
2014-07-30 22:37:14 +00:00
"dhcp; " \
"if pxe get; then " \
"pxe boot; " \
"fi\0"
#define BOOTENV_DEV_NAME_PXE(devtypeu, devtypel, instance) \
"pxe "
#else
#define BOOTENV_DEV_PXE \
BOOT_TARGET_DEVICES_references_PXE_without_CONFIG_CMD_DHCP_or_PXE
#define BOOTENV_DEV_NAME_PXE \
BOOT_TARGET_DEVICES_references_PXE_without_CONFIG_CMD_DHCP_or_PXE
#endif
#if defined(CONFIG_CMD_EXTENSION)
#define BOOTENV_RUN_EXTENSION_INIT "run extension_init; "
#define BOOTENV_RUN_EXTENSION_APPLY "run extension_apply; "
#define BOOTENV_SET_EXTENSION_NEED_INIT \
"extension_need_init=; " \
"setenv extension_overlay_addr ${fdtoverlay_addr_r}; "
#define BOOTENV_SHARED_EXTENSION \
"extension_init=" \
"echo Extension init...; " \
"if ${extension_need_init}; then " \
"extension_need_init=false; " \
"extension scan; " \
"fi\0" \
\
"extension_overlay_cmd=" \
"load ${devtype} ${devnum}:${distro_bootpart} " \
"${extension_overlay_addr} ${prefix}${extension_overlay_name}\0" \
"extension_apply=" \
"if fdt addr -q ${fdt_addr_r}; then " \
"extension apply all; " \
"fi\0"
#else
#define BOOTENV_RUN_EXTENSION_INIT
#define BOOTENV_RUN_EXTENSION_APPLY
#define BOOTENV_SET_EXTENSION_NEED_INIT
#define BOOTENV_SHARED_EXTENSION
#endif
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
2022-05-31 08:32:36 +00:00
#define BOOTENV_DEV_NAME(devtypeu, devtypel, instance, ...) \
BOOTENV_DEV_NAME_##devtypeu(devtypeu, devtypel, instance, ## __VA_ARGS__)
2014-07-30 22:37:14 +00:00
#define BOOTENV_BOOT_TARGETS \
"boot_targets=" BOOT_TARGET_DEVICES(BOOTENV_DEV_NAME) "\0"
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
2022-05-31 08:32:36 +00:00
#define BOOTENV_DEV(devtypeu, devtypel, instance, ...) \
BOOTENV_DEV_##devtypeu(devtypeu, devtypel, instance, ## __VA_ARGS__)
2014-07-30 22:37:14 +00:00
#define BOOTENV \
BOOTENV_SHARED_HOST \
2014-07-30 22:37:14 +00:00
BOOTENV_SHARED_MMC \
BOOTENV_SHARED_PCI \
2014-07-30 22:37:14 +00:00
BOOTENV_SHARED_USB \
BOOTENV_SHARED_SATA \
BOOTENV_SHARED_SCSI \
BOOTENV_SHARED_NVME \
2014-07-30 22:37:14 +00:00
BOOTENV_SHARED_IDE \
BOOTENV_SHARED_UBIFS \
BOOTENV_SHARED_EFI \
BOOTENV_SHARED_VIRTIO \
BOOTENV_SHARED_EXTENSION \
2014-07-30 22:37:14 +00:00
"boot_prefixes=/ /boot/\0" \
"boot_scripts=boot.scr.uimg boot.scr\0" \
"boot_script_dhcp=boot.scr.uimg\0" \
2014-07-30 22:37:14 +00:00
BOOTENV_BOOT_TARGETS \
\
"boot_syslinux_conf=extlinux/extlinux.conf\0" \
2014-07-30 22:37:14 +00:00
"boot_extlinux=" \
"sysboot ${devtype} ${devnum}:${distro_bootpart} any " \
"${scriptaddr} ${prefix}${boot_syslinux_conf}\0" \
2014-07-30 22:37:14 +00:00
\
"scan_dev_for_extlinux=" \
"if test -e ${devtype} " \
"${devnum}:${distro_bootpart} " \
"${prefix}${boot_syslinux_conf}; then " \
"echo Found ${prefix}${boot_syslinux_conf}; " \
2014-07-30 22:37:14 +00:00
"run boot_extlinux; " \
"echo EXTLINUX FAILED: continuing...; " \
2014-07-30 22:37:14 +00:00
"fi\0" \
\
"boot_a_script=" \
"load ${devtype} ${devnum}:${distro_bootpart} " \
2014-07-30 22:37:14 +00:00
"${scriptaddr} ${prefix}${script}; " \
"source ${scriptaddr}\0" \
\
"scan_dev_for_scripts=" \
"for script in ${boot_scripts}; do " \
"if test -e ${devtype} " \
"${devnum}:${distro_bootpart} " \
2014-07-30 22:37:14 +00:00
"${prefix}${script}; then " \
"echo Found U-Boot script " \
"${prefix}${script}; " \
"run boot_a_script; " \
"echo SCRIPT FAILED: continuing...; " \
"fi; " \
"done\0" \
\
"scan_dev_for_boot=" \
"echo Scanning ${devtype} " \
"${devnum}:${distro_bootpart}...; " \
2014-07-30 22:37:14 +00:00
"for prefix in ${boot_prefixes}; do " \
"run scan_dev_for_extlinux; " \
"run scan_dev_for_scripts; " \
"done;" \
SCAN_DEV_FOR_EFI \
"\0" \
2014-07-30 22:37:14 +00:00
\
"scan_dev_for_boot_part=" \
"part list ${devtype} ${devnum} -bootable devplist; " \
"env exists devplist || setenv devplist 1; " \
"for distro_bootpart in ${devplist}; do " \
"if fstype ${devtype} " \
"${devnum}:${distro_bootpart} " \
"bootfstype; then " \
"run scan_dev_for_boot; " \
"fi; " \
"done; " \
"setenv devplist\0" \
\
2014-07-30 22:37:14 +00:00
BOOT_TARGET_DEVICES(BOOTENV_DEV) \
\
"distro_bootcmd=" BOOTENV_SET_SCSI_NEED_INIT \
BOOTENV_SET_NVME_NEED_INIT \
BOOTENV_SET_IDE_NEED_INIT \
BOOTENV_SET_VIRTIO_NEED_INIT \
BOOTENV_SET_EXTENSION_NEED_INIT \
2014-07-30 22:37:14 +00:00
"for target in ${boot_targets}; do " \
"run bootcmd_${target}; " \
"done\0"
#endif /* _CONFIG_CMD_DISTRO_BOOTCMD_H */