u-boot/doc/board/rockchip/rockchip.rst

239 lines
6.2 KiB
ReStructuredText
Raw Normal View History

.. SPDX-License-Identifier: GPL-2.0+
.. Copyright (C) 2019 Jagan Teki <jagan@amarulasolutions.com>
ROCKCHIP
========
About this
----------
This document describes the information about Rockchip supported boards
and it's usage steps.
Rockchip boards
---------------
Rockchip is SoC solutions provider for tablets & PCs, streaming media
TV boxes, AI audio & vision, IoT hardware.
A wide range of Rockchip SoCs with associated boardsare supported in
mainline U-Boot.
List of mainline supported rockchip boards:
* rk3036
- Rockchip Evb-RK3036 (evb-rk3036)
- Kylin (kylin_rk3036)
* rk3128
- Rockchip Evb-RK3128 (evb-rk3128)
* rk3229
- Rockchip Evb-RK3229 (evb-rk3229)
* rk3288
- Rockchip Evb-RK3288 (evb-rk3288)
- Firefly-RK3288 (firefly-rk3288)
- MQmaker MiQi (miqi-rk3288)
- Phytec RK3288 PCM-947 (phycore-rk3288)
- PopMetal-RK3288 (popmetal-rk3288)
- Radxa Rock 2 Square (rock2)
- Tinker-RK3288 (tinker-rk3288)
- Google Jerry (chromebook_jerry)
- Google Mickey (chromebook_mickey)
- Google Minnie (chromebook_minnie)
- Google Speedy (chromebook_speedy)
- Amarula Vyasa-RK3288 (vyasa-rk3288)
* rk3308
- Rockchip Evb-RK3308 (evb-rk3308)
- Roc-cc-RK3308 (roc-cc-rk3308)
* rk3328
- Rockchip Evb-RK3328 (evb-rk3328)
- Pine64 Rock64 (rock64-rk3328)
- Firefly-RK3328 (roc-cc-rk3328)
- Radxa Rockpi E (rock-pi-e-rk3328)
* rk3368
- GeekBox (geekbox)
- PX5 EVB (evb-px5)
- Rockchip Sheep (sheep-rk3368)
- Theobroma Systems RK3368-uQ7 SoM - Lion (lion-rk3368)
* rk3399
- 96boards RK3399 Ficus (ficus-rk3399)
- 96boards Rock960 (rock960-rk3399)
- Firefly-RK3399 (firefly_rk3399)
- Firefly ROC-RK3399-PC
- FriendlyElec NanoPC-T4 (nanopc-t4-rk3399)
- FriendlyElec NanoPi M4 (nanopi-m4-rk3399)
- FriendlyElec NanoPi M4B (nanopi-m4b-rk3399)
- FriendlyARM NanoPi NEO4 (nanopi-neo4-rk3399)
- Google Bob (chromebook_bob)
- Khadas Edge (khadas-edge-rk3399)
- Khadas Edge-Captain (khadas-edge-captain-rk3399)
- Khadas Edge-V (hadas-edge-v-rk3399)
- Orange Pi RK3399 (orangepi-rk3399)
- Pine64 RockPro64 (rockpro64-rk3399)
- Radxa ROCK Pi 4 (rock-pi-4-rk3399)
- Rockchip Evb-RK3399 (evb_rk3399)
- Theobroma Systems RK3399-Q7 SoM - Puma (puma_rk3399)
* rv1108
- Rockchip Evb-rv1108 (evb-rv1108)
- Elgin-R1 (elgin-rv1108)
* rv3188
- Radxa Rock (rock)
Building
--------
TF-A
^^^^
TF-A would require to build for ARM64 Rockchip SoCs platforms.
To build TF-A::
git clone https://github.com/ARM-software/arm-trusted-firmware.git
cd arm-trusted-firmware
make realclean
make CROSS_COMPILE=aarch64-linux-gnu- PLAT=rk3399
Specify the PLAT= with desired rockchip platform to build TF-A for.
U-Boot
^^^^^^
To build rk3328 boards::
export BL31=/path/to/arm-trusted-firmware/to/bl31.elf
make evb-rk3328_defconfig
make
To build rk3288 boards::
make evb-rk3288_defconfig
make
To build rk3368 boards::
export BL31=/path/to/arm-trusted-firmware/to/bl31.elf
make evb-px5_defconfig
make
To build rk3399 boards::
export BL31=/path/to/arm-trusted-firmware/to/bl31.elf
make evb-rk3399_defconfig
make
Flashing
--------
1. Package the image with U-Boot TPL/SPL
-----------------------------------------
SD Card
^^^^^^^
All rockchip platforms, except rk3128 (which doesn't use SPL) are now
supporting single boot image using binman and pad_cat.
To write an image that boots from an SD card (assumed to be /dev/sda)::
sudo dd if=u-boot-rockchip.bin of=/dev/sda seek=64
sync
eMMC
^^^^
eMMC flash would probe on mmc0 in most of the rockchip platforms.
Create GPT partition layout as defined in configurations::
mmc dev 0
gpt write mmc 0 $partitions
Connect the USB-OTG cable between host and target device.
Launch fastboot at target::
fastboot 0
Upon successful gadget connection,host show the USB device like::
lsusb
Bus 001 Device 020: ID 2207:330c Fuzhou Rockchip Electronics Company RK3399 in Mask ROM mode
Program the flash::
sudo fastboot -i 0x2207 flash loader1 idbloader.img
sudo fastboot -i 0x2207 flash loader2 u-boot.itb
Note: for rockchip 32-bit platforms the U-Boot proper image
is u-boot-dtb.img
SPI
^^^
Generating idbloader for SPI boot would require to input a multi image
image format to mkimage tool instead of concerting (like for MMC boot).
SPL-alone SPI boot image::
./tools/mkimage -n rk3399 -T rkspi -d spl/u-boot-spl.bin idbloader.img
TPL+SPL SPI boot image::
./tools/mkimage -n rk3399 -T rkspi -d tpl/u-boot-tpl.bin:spl/u-boot-spl.bin idbloader.img
Copy SPI boot images into SD card and boot from SD::
sf probe
load mmc 1:1 $kernel_addr_r idbloader.img
sf erase 0 +$filesize
sf write $kernel_addr_r 0 ${filesize}
load mmc 1:1 ${kernel_addr_r} u-boot.itb
sf erase 0x60000 +$filesize
sf write $kernel_addr_r 0x60000 ${filesize}
2. Package the image with Rockchip miniloader
---------------------------------------------
Image package with Rockchip miniloader requires robin [1].
Create idbloader.img
.. code-block:: none
cd u-boot
./tools/mkimage -n px30 -T rksd -d rkbin/bin/rk33/px30_ddr_333MHz_v1.15.bin idbloader.img
cat rkbin/bin/rk33/px30_miniloader_v1.22.bin >> idbloader.img
sudo dd if=idbloader.img of=/dev/sda seek=64
Create trust.img
.. code-block:: none
cd rkbin
./tools/trust_merger RKTRUST/PX30TRUST.ini
sudo dd if=trust.img of=/dev/sda seek=24576
Create uboot.img
.. code-block:: none
rbink/tools/loaderimage --pack --uboot u-boot-dtb.bin uboot.img 0x200000
sudo dd if=uboot.img of=/dev/sda seek=16384
Note:
1. 0x200000 is load address and it's an optional in some platforms.
2. rkbin binaries are kept on updating, so would recommend to use the latest versions.
TODO
----
- Add rockchip idbloader image building
- Add rockchip TPL image building
- Document SPI flash boot
- Add missing SoC's with it boards list
[1] https://github.com/rockchip-linux/rkbin
.. Jagan Teki <jagan@amarulasolutions.com>
.. Wednesday 28 October 2020 06:47:26 PM IST