u-boot/drivers/core/devres.c

293 lines
6.2 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0+
devres: introduce Devres (Managed Device Resource) framework In U-Boot's driver model, memory is basically allocated and freed in the core framework. So, low level drivers generally only have to specify the size of needed memory with .priv_auto_alloc_size, .platdata_auto_alloc_size, etc. Nevertheless, some drivers still need to allocate/free memory on their own in case they cannot statically know the necessary memory size. So, I believe it is reasonable enough to port Devres into U-boot. Devres, which originates in Linux, manages device resources for each device and automatically releases them on driver detach. With devres, device resources are guaranteed to be freed whether initialization fails half-way or the device gets detached. The basic idea is totally the same to that of Linux, but I tweaked it a bit so that it fits in U-Boot's driver model. In U-Boot, drivers are activated in two steps: binding and probing. Binding puts a driver and a device together. It is just data manipulation on the system memory, so nothing has happened on the hardware device at this moment. When the device is really used, it is probed. Probing initializes the real hardware device to make it really ready for use. So, the resources acquired during the probing process must be freed when the device is removed. Likewise, what has been allocated in binding should be released when the device is unbound. The struct devres has a member "probe" to remember when the resource was allocated. CONFIG_DEBUG_DEVRES is also supported for easier debugging. If enabled, debug messages are printed each time a resource is allocated/freed. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Simon Glass <sjg@chromium.org>
2015-07-25 12:52:35 +00:00
/*
* Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
*
* Based on the original work in Linux by
* Copyright (c) 2006 SUSE Linux Products GmbH
* Copyright (c) 2006 Tejun Heo <teheo@suse.de>
*/
#define LOG_CATEGORY LOGC_DEVRES
devres: introduce Devres (Managed Device Resource) framework In U-Boot's driver model, memory is basically allocated and freed in the core framework. So, low level drivers generally only have to specify the size of needed memory with .priv_auto_alloc_size, .platdata_auto_alloc_size, etc. Nevertheless, some drivers still need to allocate/free memory on their own in case they cannot statically know the necessary memory size. So, I believe it is reasonable enough to port Devres into U-boot. Devres, which originates in Linux, manages device resources for each device and automatically releases them on driver detach. With devres, device resources are guaranteed to be freed whether initialization fails half-way or the device gets detached. The basic idea is totally the same to that of Linux, but I tweaked it a bit so that it fits in U-Boot's driver model. In U-Boot, drivers are activated in two steps: binding and probing. Binding puts a driver and a device together. It is just data manipulation on the system memory, so nothing has happened on the hardware device at this moment. When the device is really used, it is probed. Probing initializes the real hardware device to make it really ready for use. So, the resources acquired during the probing process must be freed when the device is removed. Likewise, what has been allocated in binding should be released when the device is unbound. The struct devres has a member "probe" to remember when the resource was allocated. CONFIG_DEBUG_DEVRES is also supported for easier debugging. If enabled, debug messages are printed each time a resource is allocated/freed. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Simon Glass <sjg@chromium.org>
2015-07-25 12:52:35 +00:00
#include <common.h>
#include <linux/compat.h>
#include <linux/kernel.h>
#include <linux/list.h>
#include <dm/device.h>
#include <dm/devres.h>
#include <dm/root.h>
#include <dm/util.h>
devres: introduce Devres (Managed Device Resource) framework In U-Boot's driver model, memory is basically allocated and freed in the core framework. So, low level drivers generally only have to specify the size of needed memory with .priv_auto_alloc_size, .platdata_auto_alloc_size, etc. Nevertheless, some drivers still need to allocate/free memory on their own in case they cannot statically know the necessary memory size. So, I believe it is reasonable enough to port Devres into U-boot. Devres, which originates in Linux, manages device resources for each device and automatically releases them on driver detach. With devres, device resources are guaranteed to be freed whether initialization fails half-way or the device gets detached. The basic idea is totally the same to that of Linux, but I tweaked it a bit so that it fits in U-Boot's driver model. In U-Boot, drivers are activated in two steps: binding and probing. Binding puts a driver and a device together. It is just data manipulation on the system memory, so nothing has happened on the hardware device at this moment. When the device is really used, it is probed. Probing initializes the real hardware device to make it really ready for use. So, the resources acquired during the probing process must be freed when the device is removed. Likewise, what has been allocated in binding should be released when the device is unbound. The struct devres has a member "probe" to remember when the resource was allocated. CONFIG_DEBUG_DEVRES is also supported for easier debugging. If enabled, debug messages are printed each time a resource is allocated/freed. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Simon Glass <sjg@chromium.org>
2015-07-25 12:52:35 +00:00
/** enum devres_phase - Shows where resource was allocated
*
* DEVRES_PHASE_BIND: In the bind() method
* DEVRES_PHASE_OFDATA: In the ofdata_to_platdata() method
* DEVRES_PHASE_PROBE: In the probe() method
*/
enum devres_phase {
DEVRES_PHASE_BIND,
DEVRES_PHASE_OFDATA,
DEVRES_PHASE_PROBE,
};
devres: introduce Devres (Managed Device Resource) framework In U-Boot's driver model, memory is basically allocated and freed in the core framework. So, low level drivers generally only have to specify the size of needed memory with .priv_auto_alloc_size, .platdata_auto_alloc_size, etc. Nevertheless, some drivers still need to allocate/free memory on their own in case they cannot statically know the necessary memory size. So, I believe it is reasonable enough to port Devres into U-boot. Devres, which originates in Linux, manages device resources for each device and automatically releases them on driver detach. With devres, device resources are guaranteed to be freed whether initialization fails half-way or the device gets detached. The basic idea is totally the same to that of Linux, but I tweaked it a bit so that it fits in U-Boot's driver model. In U-Boot, drivers are activated in two steps: binding and probing. Binding puts a driver and a device together. It is just data manipulation on the system memory, so nothing has happened on the hardware device at this moment. When the device is really used, it is probed. Probing initializes the real hardware device to make it really ready for use. So, the resources acquired during the probing process must be freed when the device is removed. Likewise, what has been allocated in binding should be released when the device is unbound. The struct devres has a member "probe" to remember when the resource was allocated. CONFIG_DEBUG_DEVRES is also supported for easier debugging. If enabled, debug messages are printed each time a resource is allocated/freed. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Simon Glass <sjg@chromium.org>
2015-07-25 12:52:35 +00:00
/**
* struct devres - Bookkeeping info for managed device resource
* @entry: List to associate this structure with a device
* @release: Callback invoked when this resource is released
* @probe: Show where this resource was allocated
devres: introduce Devres (Managed Device Resource) framework In U-Boot's driver model, memory is basically allocated and freed in the core framework. So, low level drivers generally only have to specify the size of needed memory with .priv_auto_alloc_size, .platdata_auto_alloc_size, etc. Nevertheless, some drivers still need to allocate/free memory on their own in case they cannot statically know the necessary memory size. So, I believe it is reasonable enough to port Devres into U-boot. Devres, which originates in Linux, manages device resources for each device and automatically releases them on driver detach. With devres, device resources are guaranteed to be freed whether initialization fails half-way or the device gets detached. The basic idea is totally the same to that of Linux, but I tweaked it a bit so that it fits in U-Boot's driver model. In U-Boot, drivers are activated in two steps: binding and probing. Binding puts a driver and a device together. It is just data manipulation on the system memory, so nothing has happened on the hardware device at this moment. When the device is really used, it is probed. Probing initializes the real hardware device to make it really ready for use. So, the resources acquired during the probing process must be freed when the device is removed. Likewise, what has been allocated in binding should be released when the device is unbound. The struct devres has a member "probe" to remember when the resource was allocated. CONFIG_DEBUG_DEVRES is also supported for easier debugging. If enabled, debug messages are printed each time a resource is allocated/freed. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Simon Glass <sjg@chromium.org>
2015-07-25 12:52:35 +00:00
* @name: Name of release function
* @size: Size of resource data
* @data: Resource data
*/
struct devres {
struct list_head entry;
dr_release_t release;
enum devres_phase phase;
devres: introduce Devres (Managed Device Resource) framework In U-Boot's driver model, memory is basically allocated and freed in the core framework. So, low level drivers generally only have to specify the size of needed memory with .priv_auto_alloc_size, .platdata_auto_alloc_size, etc. Nevertheless, some drivers still need to allocate/free memory on their own in case they cannot statically know the necessary memory size. So, I believe it is reasonable enough to port Devres into U-boot. Devres, which originates in Linux, manages device resources for each device and automatically releases them on driver detach. With devres, device resources are guaranteed to be freed whether initialization fails half-way or the device gets detached. The basic idea is totally the same to that of Linux, but I tweaked it a bit so that it fits in U-Boot's driver model. In U-Boot, drivers are activated in two steps: binding and probing. Binding puts a driver and a device together. It is just data manipulation on the system memory, so nothing has happened on the hardware device at this moment. When the device is really used, it is probed. Probing initializes the real hardware device to make it really ready for use. So, the resources acquired during the probing process must be freed when the device is removed. Likewise, what has been allocated in binding should be released when the device is unbound. The struct devres has a member "probe" to remember when the resource was allocated. CONFIG_DEBUG_DEVRES is also supported for easier debugging. If enabled, debug messages are printed each time a resource is allocated/freed. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Simon Glass <sjg@chromium.org>
2015-07-25 12:52:35 +00:00
#ifdef CONFIG_DEBUG_DEVRES
const char *name;
size_t size;
#endif
unsigned long long data[];
};
#ifdef CONFIG_DEBUG_DEVRES
static void set_node_dbginfo(struct devres *dr, const char *name, size_t size)
{
dr->name = name;
dr->size = size;
}
static void devres_log(struct udevice *dev, struct devres *dr,
const char *op)
{
log_debug("%s: DEVRES %3s %p %s (%lu bytes)\n", dev->name, op, dr,
dr->name, (unsigned long)dr->size);
devres: introduce Devres (Managed Device Resource) framework In U-Boot's driver model, memory is basically allocated and freed in the core framework. So, low level drivers generally only have to specify the size of needed memory with .priv_auto_alloc_size, .platdata_auto_alloc_size, etc. Nevertheless, some drivers still need to allocate/free memory on their own in case they cannot statically know the necessary memory size. So, I believe it is reasonable enough to port Devres into U-boot. Devres, which originates in Linux, manages device resources for each device and automatically releases them on driver detach. With devres, device resources are guaranteed to be freed whether initialization fails half-way or the device gets detached. The basic idea is totally the same to that of Linux, but I tweaked it a bit so that it fits in U-Boot's driver model. In U-Boot, drivers are activated in two steps: binding and probing. Binding puts a driver and a device together. It is just data manipulation on the system memory, so nothing has happened on the hardware device at this moment. When the device is really used, it is probed. Probing initializes the real hardware device to make it really ready for use. So, the resources acquired during the probing process must be freed when the device is removed. Likewise, what has been allocated in binding should be released when the device is unbound. The struct devres has a member "probe" to remember when the resource was allocated. CONFIG_DEBUG_DEVRES is also supported for easier debugging. If enabled, debug messages are printed each time a resource is allocated/freed. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Simon Glass <sjg@chromium.org>
2015-07-25 12:52:35 +00:00
}
#else /* CONFIG_DEBUG_DEVRES */
#define set_node_dbginfo(dr, n, s) do {} while (0)
#define devres_log(dev, dr, op) do {} while (0)
#endif
#if CONFIG_DEBUG_DEVRES
void *__devres_alloc(dr_release_t release, size_t size, gfp_t gfp,
const char *name)
#else
void *_devres_alloc(dr_release_t release, size_t size, gfp_t gfp)
#endif
{
size_t tot_size = sizeof(struct devres) + size;
struct devres *dr;
dr = kmalloc(tot_size, gfp);
if (unlikely(!dr))
return NULL;
INIT_LIST_HEAD(&dr->entry);
dr->release = release;
set_node_dbginfo(dr, name, size);
return dr->data;
}
void devres_free(void *res)
{
if (res) {
struct devres *dr = container_of(res, struct devres, data);
assert_noisy(list_empty(&dr->entry));
devres: introduce Devres (Managed Device Resource) framework In U-Boot's driver model, memory is basically allocated and freed in the core framework. So, low level drivers generally only have to specify the size of needed memory with .priv_auto_alloc_size, .platdata_auto_alloc_size, etc. Nevertheless, some drivers still need to allocate/free memory on their own in case they cannot statically know the necessary memory size. So, I believe it is reasonable enough to port Devres into U-boot. Devres, which originates in Linux, manages device resources for each device and automatically releases them on driver detach. With devres, device resources are guaranteed to be freed whether initialization fails half-way or the device gets detached. The basic idea is totally the same to that of Linux, but I tweaked it a bit so that it fits in U-Boot's driver model. In U-Boot, drivers are activated in two steps: binding and probing. Binding puts a driver and a device together. It is just data manipulation on the system memory, so nothing has happened on the hardware device at this moment. When the device is really used, it is probed. Probing initializes the real hardware device to make it really ready for use. So, the resources acquired during the probing process must be freed when the device is removed. Likewise, what has been allocated in binding should be released when the device is unbound. The struct devres has a member "probe" to remember when the resource was allocated. CONFIG_DEBUG_DEVRES is also supported for easier debugging. If enabled, debug messages are printed each time a resource is allocated/freed. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Simon Glass <sjg@chromium.org>
2015-07-25 12:52:35 +00:00
kfree(dr);
}
}
void devres_add(struct udevice *dev, void *res)
{
struct devres *dr = container_of(res, struct devres, data);
devres_log(dev, dr, "ADD");
assert_noisy(list_empty(&dr->entry));
if (dev->flags & DM_FLAG_PLATDATA_VALID)
dr->phase = DEVRES_PHASE_PROBE;
else if (dev->flags & DM_FLAG_BOUND)
dr->phase = DEVRES_PHASE_OFDATA;
else
dr->phase = DEVRES_PHASE_BIND;
devres: introduce Devres (Managed Device Resource) framework In U-Boot's driver model, memory is basically allocated and freed in the core framework. So, low level drivers generally only have to specify the size of needed memory with .priv_auto_alloc_size, .platdata_auto_alloc_size, etc. Nevertheless, some drivers still need to allocate/free memory on their own in case they cannot statically know the necessary memory size. So, I believe it is reasonable enough to port Devres into U-boot. Devres, which originates in Linux, manages device resources for each device and automatically releases them on driver detach. With devres, device resources are guaranteed to be freed whether initialization fails half-way or the device gets detached. The basic idea is totally the same to that of Linux, but I tweaked it a bit so that it fits in U-Boot's driver model. In U-Boot, drivers are activated in two steps: binding and probing. Binding puts a driver and a device together. It is just data manipulation on the system memory, so nothing has happened on the hardware device at this moment. When the device is really used, it is probed. Probing initializes the real hardware device to make it really ready for use. So, the resources acquired during the probing process must be freed when the device is removed. Likewise, what has been allocated in binding should be released when the device is unbound. The struct devres has a member "probe" to remember when the resource was allocated. CONFIG_DEBUG_DEVRES is also supported for easier debugging. If enabled, debug messages are printed each time a resource is allocated/freed. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Simon Glass <sjg@chromium.org>
2015-07-25 12:52:35 +00:00
list_add_tail(&dr->entry, &dev->devres_head);
}
void *devres_find(struct udevice *dev, dr_release_t release,
dr_match_t match, void *match_data)
{
struct devres *dr;
list_for_each_entry_reverse(dr, &dev->devres_head, entry) {
if (dr->release != release)
continue;
if (match && !match(dev, dr->data, match_data))
continue;
return dr->data;
}
return NULL;
}
void *devres_get(struct udevice *dev, void *new_res,
dr_match_t match, void *match_data)
{
struct devres *new_dr = container_of(new_res, struct devres, data);
void *res;
res = devres_find(dev, new_dr->release, match, match_data);
if (!res) {
devres_add(dev, new_res);
res = new_res;
new_res = NULL;
}
devres_free(new_res);
return res;
}
void *devres_remove(struct udevice *dev, dr_release_t release,
dr_match_t match, void *match_data)
{
void *res;
res = devres_find(dev, release, match, match_data);
if (res) {
struct devres *dr = container_of(res, struct devres, data);
list_del_init(&dr->entry);
devres_log(dev, dr, "REM");
}
return res;
}
int devres_destroy(struct udevice *dev, dr_release_t release,
dr_match_t match, void *match_data)
{
void *res;
res = devres_remove(dev, release, match, match_data);
if (unlikely(!res))
return -ENOENT;
devres_free(res);
return 0;
}
int devres_release(struct udevice *dev, dr_release_t release,
dr_match_t match, void *match_data)
{
void *res;
res = devres_remove(dev, release, match, match_data);
if (unlikely(!res))
return -ENOENT;
(*release)(dev, res);
devres_free(res);
return 0;
}
static void release_nodes(struct udevice *dev, struct list_head *head,
bool probe_and_ofdata_only)
devres: introduce Devres (Managed Device Resource) framework In U-Boot's driver model, memory is basically allocated and freed in the core framework. So, low level drivers generally only have to specify the size of needed memory with .priv_auto_alloc_size, .platdata_auto_alloc_size, etc. Nevertheless, some drivers still need to allocate/free memory on their own in case they cannot statically know the necessary memory size. So, I believe it is reasonable enough to port Devres into U-boot. Devres, which originates in Linux, manages device resources for each device and automatically releases them on driver detach. With devres, device resources are guaranteed to be freed whether initialization fails half-way or the device gets detached. The basic idea is totally the same to that of Linux, but I tweaked it a bit so that it fits in U-Boot's driver model. In U-Boot, drivers are activated in two steps: binding and probing. Binding puts a driver and a device together. It is just data manipulation on the system memory, so nothing has happened on the hardware device at this moment. When the device is really used, it is probed. Probing initializes the real hardware device to make it really ready for use. So, the resources acquired during the probing process must be freed when the device is removed. Likewise, what has been allocated in binding should be released when the device is unbound. The struct devres has a member "probe" to remember when the resource was allocated. CONFIG_DEBUG_DEVRES is also supported for easier debugging. If enabled, debug messages are printed each time a resource is allocated/freed. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Simon Glass <sjg@chromium.org>
2015-07-25 12:52:35 +00:00
{
struct devres *dr, *tmp;
list_for_each_entry_safe_reverse(dr, tmp, head, entry) {
if (probe_and_ofdata_only && dr->phase == DEVRES_PHASE_BIND)
devres: introduce Devres (Managed Device Resource) framework In U-Boot's driver model, memory is basically allocated and freed in the core framework. So, low level drivers generally only have to specify the size of needed memory with .priv_auto_alloc_size, .platdata_auto_alloc_size, etc. Nevertheless, some drivers still need to allocate/free memory on their own in case they cannot statically know the necessary memory size. So, I believe it is reasonable enough to port Devres into U-boot. Devres, which originates in Linux, manages device resources for each device and automatically releases them on driver detach. With devres, device resources are guaranteed to be freed whether initialization fails half-way or the device gets detached. The basic idea is totally the same to that of Linux, but I tweaked it a bit so that it fits in U-Boot's driver model. In U-Boot, drivers are activated in two steps: binding and probing. Binding puts a driver and a device together. It is just data manipulation on the system memory, so nothing has happened on the hardware device at this moment. When the device is really used, it is probed. Probing initializes the real hardware device to make it really ready for use. So, the resources acquired during the probing process must be freed when the device is removed. Likewise, what has been allocated in binding should be released when the device is unbound. The struct devres has a member "probe" to remember when the resource was allocated. CONFIG_DEBUG_DEVRES is also supported for easier debugging. If enabled, debug messages are printed each time a resource is allocated/freed. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Simon Glass <sjg@chromium.org>
2015-07-25 12:52:35 +00:00
break;
devres_log(dev, dr, "REL");
dr->release(dev, dr->data);
list_del(&dr->entry);
kfree(dr);
}
}
void devres_release_probe(struct udevice *dev)
{
release_nodes(dev, &dev->devres_head, true);
}
void devres_release_all(struct udevice *dev)
{
release_nodes(dev, &dev->devres_head, false);
}
#ifdef CONFIG_DEBUG_DEVRES
static char *const devres_phase_name[] = {"BIND", "OFDATA", "PROBE"};
static void dump_resources(struct udevice *dev, int depth)
{
struct devres *dr;
struct udevice *child;
printf("- %s\n", dev->name);
list_for_each_entry(dr, &dev->devres_head, entry)
printf(" %p (%lu byte) %s %s\n", dr,
(unsigned long)dr->size, dr->name,
devres_phase_name[dr->phase]);
list_for_each_entry(child, &dev->child_head, sibling_node)
dump_resources(child, depth + 1);
}
void dm_dump_devres(void)
{
struct udevice *root;
root = dm_root();
if (root)
dump_resources(root, 0);
}
void devres_get_stats(const struct udevice *dev, struct devres_stats *stats)
{
struct devres *dr;
stats->allocs = 0;
stats->total_size = 0;
list_for_each_entry(dr, &dev->devres_head, entry) {
stats->allocs++;
stats->total_size += dr->size;
}
}
#endif
/*
* Managed kmalloc/kfree
*/
static void devm_kmalloc_release(struct udevice *dev, void *res)
{
/* noop */
}
static int devm_kmalloc_match(struct udevice *dev, void *res, void *data)
{
return res == data;
}
void *devm_kmalloc(struct udevice *dev, size_t size, gfp_t gfp)
{
void *data;
data = _devres_alloc(devm_kmalloc_release, size, gfp);
if (unlikely(!data))
return NULL;
devres_add(dev, data);
return data;
}
void devm_kfree(struct udevice *dev, void *p)
{
int rc;
rc = devres_destroy(dev, devm_kmalloc_release, devm_kmalloc_match, p);
assert_noisy(!rc);
}