Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-11-06 13:14:27 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/drivers/ddr/marvell/a38x/ddr3_training_hw_algo.c

678 lines
18 KiB
C
Raw Normal View History

SPDX: Convert all of our single license tags to Linux Kernel style When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-06 21:58:06 +00:00
// SPDX-License-Identifier: GPL-2.0
arm: mvebu: Add Armada 38x DDR3 training code from Marvell bin_hdr This patch adds the DDR3 setup and training code taken from the Marvell U-Boot repository. This code used to be included as a binary (bin_hdr) into the Armada A38x boot image. Not linked with the main U-Boot. With this code addition and the serdes/PHY setup code, the Armada A38x support in mainline U-Boot is finally self-contained. So the complete image for booting can be built from mainline U-Boot. Without any additional external inclusion. Note: This code has undergone many hours (days!) of coding-style cleanup and refactoring. It still is not checkpatch clean though, I'm afraid. As the factoring of the code has so many levels of indentation that many lines are longer than 80 chars. Signed-off-by: Stefan Roese <sr@denx.de>
2015-03-26 14:36:56 +00:00
/*
* Copyright (C) Marvell International Ltd. and its affiliates
*/
#include "ddr3_init.h"
ARM: mvebu: a38x: sync ddr training code with mv_ddr-armada-18.09.02 This syncs drivers/ddr/marvell/a38x/ with the mv_ddr-armada-18.09 branch of https://github.com/MarvellEmbeddedProcessors/mv-ddr-marvell.git. Specifically this syncs with commit 99d772547314 ("Bump mv_ddr to release armada-18.09.2"). The complete log of changes is best obtained from the mv-ddr-marvell.git repository but some relevant highlights are: ddr3: add missing txsdll parameter ddr3: fix tfaw timimg parameter ddr3: fix trrd timimg parameter merge ddr3 topology header file with mv_ddr_topology one mv_ddr: a38x: fix zero memory size scrubbing issue The upstream code is incorporated omitting the portions not relevant to Armada-38x and DDR3. After that a semi-automated step is used to drop unused features with unifdef find drivers/ddr/marvell/a38x/ -name '*.[ch]' | \ xargs unifdef -m -UMV_DDR -UMV_DDR_ATF -UCONFIG_DDR4 \ -UCONFIG_APN806 -UCONFIG_MC_STATIC \ -UCONFIG_MC_STATIC_PRINT -UCONFIG_PHY_STATIC \ -UCONFIG_64BIT -UCONFIG_A3700 -UA3900 -UA80X0 \ -UA70X0 Signed-off-by: Chris Packham <judge.packham@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de> Tested-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Stefan Roese <sr@denx.de>
2018-12-03 01:26:49 +00:00
#include "mv_ddr_regs.h"
arm: mvebu: Add Armada 38x DDR3 training code from Marvell bin_hdr This patch adds the DDR3 setup and training code taken from the Marvell U-Boot repository. This code used to be included as a binary (bin_hdr) into the Armada A38x boot image. Not linked with the main U-Boot. With this code addition and the serdes/PHY setup code, the Armada A38x support in mainline U-Boot is finally self-contained. So the complete image for booting can be built from mainline U-Boot. Without any additional external inclusion. Note: This code has undergone many hours (days!) of coding-style cleanup and refactoring. It still is not checkpatch clean though, I'm afraid. As the factoring of the code has so many levels of indentation that many lines are longer than 80 chars. Signed-off-by: Stefan Roese <sr@denx.de>
2015-03-26 14:36:56 +00:00
#define VREF_INITIAL_STEP 3
#define VREF_SECOND_STEP 1
#define VREF_MAX_INDEX 7
#define MAX_VALUE (1024 - 1)
#define MIN_VALUE (-MAX_VALUE)
ARM: mvebu: a38x: sync ddr training code with upstream This syncs drivers/ddr/marvell/a38x/ with the mv_ddr-armada-17.10 branch of https://github.com/MarvellEmbeddedProcessors/mv-ddr-marvell.git. The upstream code is incorporated omitting the ddr4 and apn806 and folding the nested a38x directory up one level. After that a semi-automated step is used to drop unused features with unifdef find drivers/ddr/marvell/a38x/ -name '*.[ch]' | \ xargs unifdef -m -UMV_DDR -UMV_DDR_ATF -UCONFIG_DDR4 \ -UCONFIG_APN806 -UCONFIG_MC_STATIC \ -UCONFIG_MC_STATIC_PRINT -UCONFIG_PHY_STATIC \ -UCONFIG_64BIT INTER_REGS_BASE is updated to be defined as SOC_REGS_PHY_BASE. Some now empty files are removed and the ternary license is replaced with a SPDX GPL-2.0+ identifier. Signed-off-by: Chris Packham <judge.packham@gmail.com> Signed-off-by: Stefan Roese <sr@denx.de>
2018-05-10 01:28:29 +00:00
#define GET_RD_SAMPLE_DELAY(data, cs) ((data >> rd_sample_mask[cs]) & 0xf)
arm: mvebu: Add Armada 38x DDR3 training code from Marvell bin_hdr This patch adds the DDR3 setup and training code taken from the Marvell U-Boot repository. This code used to be included as a binary (bin_hdr) into the Armada A38x boot image. Not linked with the main U-Boot. With this code addition and the serdes/PHY setup code, the Armada A38x support in mainline U-Boot is finally self-contained. So the complete image for booting can be built from mainline U-Boot. Without any additional external inclusion. Note: This code has undergone many hours (days!) of coding-style cleanup and refactoring. It still is not checkpatch clean though, I'm afraid. As the factoring of the code has so many levels of indentation that many lines are longer than 80 chars. Signed-off-by: Stefan Roese <sr@denx.de>
2015-03-26 14:36:56 +00:00
u32 ca_delay;
int ddr3_tip_centr_skip_min_win_check = 0;
u8 current_vref[MAX_BUS_NUM][MAX_INTERFACE_NUM];
u8 last_vref[MAX_BUS_NUM][MAX_INTERFACE_NUM];
u16 current_valid_window[MAX_BUS_NUM][MAX_INTERFACE_NUM];
u16 last_valid_window[MAX_BUS_NUM][MAX_INTERFACE_NUM];
u8 lim_vref[MAX_BUS_NUM][MAX_INTERFACE_NUM];
u8 interface_state[MAX_INTERFACE_NUM];
u8 vref_window_size[MAX_INTERFACE_NUM][MAX_BUS_NUM];
u8 vref_window_size_th = 12;
static u8 pup_st[MAX_BUS_NUM][MAX_INTERFACE_NUM];
static u32 rd_sample_mask[] = {
0,
8,
16,
24
};
#define VREF_STEP_1 0
#define VREF_STEP_2 1
#define VREF_CONVERGE 2
/*
* ODT additional timing
*/
int ddr3_tip_write_additional_odt_setting(u32 dev_num, u32 if_id)
{
ARM: mvebu: a38x: sync ddr training code with upstream This syncs drivers/ddr/marvell/a38x/ with the mv_ddr-armada-17.10 branch of https://github.com/MarvellEmbeddedProcessors/mv-ddr-marvell.git. The upstream code is incorporated omitting the ddr4 and apn806 and folding the nested a38x directory up one level. After that a semi-automated step is used to drop unused features with unifdef find drivers/ddr/marvell/a38x/ -name '*.[ch]' | \ xargs unifdef -m -UMV_DDR -UMV_DDR_ATF -UCONFIG_DDR4 \ -UCONFIG_APN806 -UCONFIG_MC_STATIC \ -UCONFIG_MC_STATIC_PRINT -UCONFIG_PHY_STATIC \ -UCONFIG_64BIT INTER_REGS_BASE is updated to be defined as SOC_REGS_PHY_BASE. Some now empty files are removed and the ternary license is replaced with a SPDX GPL-2.0+ identifier. Signed-off-by: Chris Packham <judge.packham@gmail.com> Signed-off-by: Stefan Roese <sr@denx.de>
2018-05-10 01:28:29 +00:00
u32 cs_num = 0, max_read_sample = 0, min_read_sample = 0x1f;
arm: mvebu: Add Armada 38x DDR3 training code from Marvell bin_hdr This patch adds the DDR3 setup and training code taken from the Marvell U-Boot repository. This code used to be included as a binary (bin_hdr) into the Armada A38x boot image. Not linked with the main U-Boot. With this code addition and the serdes/PHY setup code, the Armada A38x support in mainline U-Boot is finally self-contained. So the complete image for booting can be built from mainline U-Boot. Without any additional external inclusion. Note: This code has undergone many hours (days!) of coding-style cleanup and refactoring. It still is not checkpatch clean though, I'm afraid. As the factoring of the code has so many levels of indentation that many lines are longer than 80 chars. Signed-off-by: Stefan Roese <sr@denx.de>
2015-03-26 14:36:56 +00:00
u32 data_read[MAX_INTERFACE_NUM] = { 0 };
u32 read_sample[MAX_CS_NUM];
u32 val;
u32 pup_index;
int max_phase = MIN_VALUE, current_phase;
enum hws_access_type access_type = ACCESS_TYPE_UNICAST;
ARM: mvebu: a38x: sync ddr training code with upstream This syncs drivers/ddr/marvell/a38x/ with the mv_ddr-armada-17.10 branch of https://github.com/MarvellEmbeddedProcessors/mv-ddr-marvell.git. The upstream code is incorporated omitting the ddr4 and apn806 and folding the nested a38x directory up one level. After that a semi-automated step is used to drop unused features with unifdef find drivers/ddr/marvell/a38x/ -name '*.[ch]' | \ xargs unifdef -m -UMV_DDR -UMV_DDR_ATF -UCONFIG_DDR4 \ -UCONFIG_APN806 -UCONFIG_MC_STATIC \ -UCONFIG_MC_STATIC_PRINT -UCONFIG_PHY_STATIC \ -UCONFIG_64BIT INTER_REGS_BASE is updated to be defined as SOC_REGS_PHY_BASE. Some now empty files are removed and the ternary license is replaced with a SPDX GPL-2.0+ identifier. Signed-off-by: Chris Packham <judge.packham@gmail.com> Signed-off-by: Stefan Roese <sr@denx.de>
2018-05-10 01:28:29 +00:00
u32 octets_per_if_num = ddr3_tip_dev_attr_get(dev_num, MV_ATTR_OCTET_PER_INTERFACE);
mv_ddr: ddr3: only use active chip-selects when tuning ODT Inactive chip-selects will give invalid values for read_sample so don't consider them when trying to determine the overall min/max read sample. Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> [https://github.com/MarvellEmbeddedProcessors/mv-ddr-marvell/pull/18] Signed-off-by: Chris Packham <judge.packham@gmail.com> Signed-off-by: Stefan Roese <sr@denx.de>
2019-02-28 21:11:14 +00:00
unsigned int max_cs = mv_ddr_cs_num_get();
arm: mvebu: Add Armada 38x DDR3 training code from Marvell bin_hdr This patch adds the DDR3 setup and training code taken from the Marvell U-Boot repository. This code used to be included as a binary (bin_hdr) into the Armada A38x boot image. Not linked with the main U-Boot. With this code addition and the serdes/PHY setup code, the Armada A38x support in mainline U-Boot is finally self-contained. So the complete image for booting can be built from mainline U-Boot. Without any additional external inclusion. Note: This code has undergone many hours (days!) of coding-style cleanup and refactoring. It still is not checkpatch clean though, I'm afraid. As the factoring of the code has so many levels of indentation that many lines are longer than 80 chars. Signed-off-by: Stefan Roese <sr@denx.de>
2015-03-26 14:36:56 +00:00
CHECK_STATUS(ddr3_tip_if_write(dev_num, access_type, if_id,
ARM: mvebu: a38x: sync ddr training code with upstream This syncs drivers/ddr/marvell/a38x/ with the mv_ddr-armada-17.10 branch of https://github.com/MarvellEmbeddedProcessors/mv-ddr-marvell.git. The upstream code is incorporated omitting the ddr4 and apn806 and folding the nested a38x directory up one level. After that a semi-automated step is used to drop unused features with unifdef find drivers/ddr/marvell/a38x/ -name '*.[ch]' | \ xargs unifdef -m -UMV_DDR -UMV_DDR_ATF -UCONFIG_DDR4 \ -UCONFIG_APN806 -UCONFIG_MC_STATIC \ -UCONFIG_MC_STATIC_PRINT -UCONFIG_PHY_STATIC \ -UCONFIG_64BIT INTER_REGS_BASE is updated to be defined as SOC_REGS_PHY_BASE. Some now empty files are removed and the ternary license is replaced with a SPDX GPL-2.0+ identifier. Signed-off-by: Chris Packham <judge.packham@gmail.com> Signed-off-by: Stefan Roese <sr@denx.de>
2018-05-10 01:28:29 +00:00
DUNIT_ODT_CTRL_REG,
arm: mvebu: Add Armada 38x DDR3 training code from Marvell bin_hdr This patch adds the DDR3 setup and training code taken from the Marvell U-Boot repository. This code used to be included as a binary (bin_hdr) into the Armada A38x boot image. Not linked with the main U-Boot. With this code addition and the serdes/PHY setup code, the Armada A38x support in mainline U-Boot is finally self-contained. So the complete image for booting can be built from mainline U-Boot. Without any additional external inclusion. Note: This code has undergone many hours (days!) of coding-style cleanup and refactoring. It still is not checkpatch clean though, I'm afraid. As the factoring of the code has so many levels of indentation that many lines are longer than 80 chars. Signed-off-by: Stefan Roese <sr@denx.de>
2015-03-26 14:36:56 +00:00
0 << 8, 0x3 << 8));
CHECK_STATUS(ddr3_tip_if_read(dev_num, access_type, if_id,
ARM: mvebu: a38x: sync ddr training code with upstream This syncs drivers/ddr/marvell/a38x/ with the mv_ddr-armada-17.10 branch of https://github.com/MarvellEmbeddedProcessors/mv-ddr-marvell.git. The upstream code is incorporated omitting the ddr4 and apn806 and folding the nested a38x directory up one level. After that a semi-automated step is used to drop unused features with unifdef find drivers/ddr/marvell/a38x/ -name '*.[ch]' | \ xargs unifdef -m -UMV_DDR -UMV_DDR_ATF -UCONFIG_DDR4 \ -UCONFIG_APN806 -UCONFIG_MC_STATIC \ -UCONFIG_MC_STATIC_PRINT -UCONFIG_PHY_STATIC \ -UCONFIG_64BIT INTER_REGS_BASE is updated to be defined as SOC_REGS_PHY_BASE. Some now empty files are removed and the ternary license is replaced with a SPDX GPL-2.0+ identifier. Signed-off-by: Chris Packham <judge.packham@gmail.com> Signed-off-by: Stefan Roese <sr@denx.de>
2018-05-10 01:28:29 +00:00
RD_DATA_SMPL_DLYS_REG,
arm: mvebu: Add Armada 38x DDR3 training code from Marvell bin_hdr This patch adds the DDR3 setup and training code taken from the Marvell U-Boot repository. This code used to be included as a binary (bin_hdr) into the Armada A38x boot image. Not linked with the main U-Boot. With this code addition and the serdes/PHY setup code, the Armada A38x support in mainline U-Boot is finally self-contained. So the complete image for booting can be built from mainline U-Boot. Without any additional external inclusion. Note: This code has undergone many hours (days!) of coding-style cleanup and refactoring. It still is not checkpatch clean though, I'm afraid. As the factoring of the code has so many levels of indentation that many lines are longer than 80 chars. Signed-off-by: Stefan Roese <sr@denx.de>
2015-03-26 14:36:56 +00:00
data_read, MASK_ALL_BITS));
val = data_read[if_id];
mv_ddr: ddr3: only use active chip-selects when tuning ODT Inactive chip-selects will give invalid values for read_sample so don't consider them when trying to determine the overall min/max read sample. Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> [https://github.com/MarvellEmbeddedProcessors/mv-ddr-marvell/pull/18] Signed-off-by: Chris Packham <judge.packham@gmail.com> Signed-off-by: Stefan Roese <sr@denx.de>
2019-02-28 21:11:14 +00:00
for (cs_num = 0; cs_num < max_cs; cs_num++) {
arm: mvebu: Add Armada 38x DDR3 training code from Marvell bin_hdr This patch adds the DDR3 setup and training code taken from the Marvell U-Boot repository. This code used to be included as a binary (bin_hdr) into the Armada A38x boot image. Not linked with the main U-Boot. With this code addition and the serdes/PHY setup code, the Armada A38x support in mainline U-Boot is finally self-contained. So the complete image for booting can be built from mainline U-Boot. Without any additional external inclusion. Note: This code has undergone many hours (days!) of coding-style cleanup and refactoring. It still is not checkpatch clean though, I'm afraid. As the factoring of the code has so many levels of indentation that many lines are longer than 80 chars. Signed-off-by: Stefan Roese <sr@denx.de>
2015-03-26 14:36:56 +00:00
read_sample[cs_num] = GET_RD_SAMPLE_DELAY(val, cs_num);
/* find maximum of read_samples */
if (read_sample[cs_num] >= max_read_sample) {
ARM: mvebu: a38x: sync ddr training code with upstream This syncs drivers/ddr/marvell/a38x/ with the mv_ddr-armada-17.10 branch of https://github.com/MarvellEmbeddedProcessors/mv-ddr-marvell.git. The upstream code is incorporated omitting the ddr4 and apn806 and folding the nested a38x directory up one level. After that a semi-automated step is used to drop unused features with unifdef find drivers/ddr/marvell/a38x/ -name '*.[ch]' | \ xargs unifdef -m -UMV_DDR -UMV_DDR_ATF -UCONFIG_DDR4 \ -UCONFIG_APN806 -UCONFIG_MC_STATIC \ -UCONFIG_MC_STATIC_PRINT -UCONFIG_PHY_STATIC \ -UCONFIG_64BIT INTER_REGS_BASE is updated to be defined as SOC_REGS_PHY_BASE. Some now empty files are removed and the ternary license is replaced with a SPDX GPL-2.0+ identifier. Signed-off-by: Chris Packham <judge.packham@gmail.com> Signed-off-by: Stefan Roese <sr@denx.de>
2018-05-10 01:28:29 +00:00
if (read_sample[cs_num] == max_read_sample)
ddr: marvell: update additional ODT setting The RD_SAMPLE_DELAY field is 5 bits so it needs to be masked with 0x1f instead of 0xf. Rather than checking the read sample delay for all DDR chip selects use the values for the chip selects that are actually configured. Finally continue searching for the max_phase value even if the current read_sample is the same as the max_read_sample. Signed-off-by: Chris Packham <judge.packham@gmail.com> Signed-off-by: Stefan Roese <sr@denx.de>
2018-01-18 04:16:09 +00:00
max_phase = MIN_VALUE;
ARM: mvebu: a38x: sync ddr training code with upstream This syncs drivers/ddr/marvell/a38x/ with the mv_ddr-armada-17.10 branch of https://github.com/MarvellEmbeddedProcessors/mv-ddr-marvell.git. The upstream code is incorporated omitting the ddr4 and apn806 and folding the nested a38x directory up one level. After that a semi-automated step is used to drop unused features with unifdef find drivers/ddr/marvell/a38x/ -name '*.[ch]' | \ xargs unifdef -m -UMV_DDR -UMV_DDR_ATF -UCONFIG_DDR4 \ -UCONFIG_APN806 -UCONFIG_MC_STATIC \ -UCONFIG_MC_STATIC_PRINT -UCONFIG_PHY_STATIC \ -UCONFIG_64BIT INTER_REGS_BASE is updated to be defined as SOC_REGS_PHY_BASE. Some now empty files are removed and the ternary license is replaced with a SPDX GPL-2.0+ identifier. Signed-off-by: Chris Packham <judge.packham@gmail.com> Signed-off-by: Stefan Roese <sr@denx.de>
2018-05-10 01:28:29 +00:00
else
max_read_sample = read_sample[cs_num];
arm: mvebu: Add Armada 38x DDR3 training code from Marvell bin_hdr This patch adds the DDR3 setup and training code taken from the Marvell U-Boot repository. This code used to be included as a binary (bin_hdr) into the Armada A38x boot image. Not linked with the main U-Boot. With this code addition and the serdes/PHY setup code, the Armada A38x support in mainline U-Boot is finally self-contained. So the complete image for booting can be built from mainline U-Boot. Without any additional external inclusion. Note: This code has undergone many hours (days!) of coding-style cleanup and refactoring. It still is not checkpatch clean though, I'm afraid. As the factoring of the code has so many levels of indentation that many lines are longer than 80 chars. Signed-off-by: Stefan Roese <sr@denx.de>
2015-03-26 14:36:56 +00:00
for (pup_index = 0;
ARM: mvebu: a38x: sync ddr training code with upstream This syncs drivers/ddr/marvell/a38x/ with the mv_ddr-armada-17.10 branch of https://github.com/MarvellEmbeddedProcessors/mv-ddr-marvell.git. The upstream code is incorporated omitting the ddr4 and apn806 and folding the nested a38x directory up one level. After that a semi-automated step is used to drop unused features with unifdef find drivers/ddr/marvell/a38x/ -name '*.[ch]' | \ xargs unifdef -m -UMV_DDR -UMV_DDR_ATF -UCONFIG_DDR4 \ -UCONFIG_APN806 -UCONFIG_MC_STATIC \ -UCONFIG_MC_STATIC_PRINT -UCONFIG_PHY_STATIC \ -UCONFIG_64BIT INTER_REGS_BASE is updated to be defined as SOC_REGS_PHY_BASE. Some now empty files are removed and the ternary license is replaced with a SPDX GPL-2.0+ identifier. Signed-off-by: Chris Packham <judge.packham@gmail.com> Signed-off-by: Stefan Roese <sr@denx.de>
2018-05-10 01:28:29 +00:00
pup_index < octets_per_if_num;
arm: mvebu: Add Armada 38x DDR3 training code from Marvell bin_hdr This patch adds the DDR3 setup and training code taken from the Marvell U-Boot repository. This code used to be included as a binary (bin_hdr) into the Armada A38x boot image. Not linked with the main U-Boot. With this code addition and the serdes/PHY setup code, the Armada A38x support in mainline U-Boot is finally self-contained. So the complete image for booting can be built from mainline U-Boot. Without any additional external inclusion. Note: This code has undergone many hours (days!) of coding-style cleanup and refactoring. It still is not checkpatch clean though, I'm afraid. As the factoring of the code has so many levels of indentation that many lines are longer than 80 chars. Signed-off-by: Stefan Roese <sr@denx.de>
2015-03-26 14:36:56 +00:00
pup_index++) {
CHECK_STATUS(ddr3_tip_bus_read
(dev_num, if_id,
ACCESS_TYPE_UNICAST, pup_index,
DDR_PHY_DATA,
ARM: mvebu: a38x: sync ddr training code with upstream This syncs drivers/ddr/marvell/a38x/ with the mv_ddr-armada-17.10 branch of https://github.com/MarvellEmbeddedProcessors/mv-ddr-marvell.git. The upstream code is incorporated omitting the ddr4 and apn806 and folding the nested a38x directory up one level. After that a semi-automated step is used to drop unused features with unifdef find drivers/ddr/marvell/a38x/ -name '*.[ch]' | \ xargs unifdef -m -UMV_DDR -UMV_DDR_ATF -UCONFIG_DDR4 \ -UCONFIG_APN806 -UCONFIG_MC_STATIC \ -UCONFIG_MC_STATIC_PRINT -UCONFIG_PHY_STATIC \ -UCONFIG_64BIT INTER_REGS_BASE is updated to be defined as SOC_REGS_PHY_BASE. Some now empty files are removed and the ternary license is replaced with a SPDX GPL-2.0+ identifier. Signed-off-by: Chris Packham <judge.packham@gmail.com> Signed-off-by: Stefan Roese <sr@denx.de>
2018-05-10 01:28:29 +00:00
RL_PHY_REG(cs_num),
arm: mvebu: Add Armada 38x DDR3 training code from Marvell bin_hdr This patch adds the DDR3 setup and training code taken from the Marvell U-Boot repository. This code used to be included as a binary (bin_hdr) into the Armada A38x boot image. Not linked with the main U-Boot. With this code addition and the serdes/PHY setup code, the Armada A38x support in mainline U-Boot is finally self-contained. So the complete image for booting can be built from mainline U-Boot. Without any additional external inclusion. Note: This code has undergone many hours (days!) of coding-style cleanup and refactoring. It still is not checkpatch clean though, I'm afraid. As the factoring of the code has so many levels of indentation that many lines are longer than 80 chars. Signed-off-by: Stefan Roese <sr@denx.de>
2015-03-26 14:36:56 +00:00
&val));
current_phase = ((int)val & 0xe0) >> 6;
if (current_phase >= max_phase)
max_phase = current_phase;
}
}
/* find minimum */
if (read_sample[cs_num] < min_read_sample)
min_read_sample = read_sample[cs_num];
}
min_read_sample = min_read_sample - 1;
max_read_sample = max_read_sample + 4 + (max_phase + 1) / 2 + 1;
ARM: mvebu: a38x: sync ddr training code with upstream This syncs drivers/ddr/marvell/a38x/ with the mv_ddr-armada-17.10 branch of https://github.com/MarvellEmbeddedProcessors/mv-ddr-marvell.git. The upstream code is incorporated omitting the ddr4 and apn806 and folding the nested a38x directory up one level. After that a semi-automated step is used to drop unused features with unifdef find drivers/ddr/marvell/a38x/ -name '*.[ch]' | \ xargs unifdef -m -UMV_DDR -UMV_DDR_ATF -UCONFIG_DDR4 \ -UCONFIG_APN806 -UCONFIG_MC_STATIC \ -UCONFIG_MC_STATIC_PRINT -UCONFIG_PHY_STATIC \ -UCONFIG_64BIT INTER_REGS_BASE is updated to be defined as SOC_REGS_PHY_BASE. Some now empty files are removed and the ternary license is replaced with a SPDX GPL-2.0+ identifier. Signed-off-by: Chris Packham <judge.packham@gmail.com> Signed-off-by: Stefan Roese <sr@denx.de>
2018-05-10 01:28:29 +00:00
if (min_read_sample >= 0xf)
min_read_sample = 0xf;
arm: mvebu: Add Armada 38x DDR3 training code from Marvell bin_hdr This patch adds the DDR3 setup and training code taken from the Marvell U-Boot repository. This code used to be included as a binary (bin_hdr) into the Armada A38x boot image. Not linked with the main U-Boot. With this code addition and the serdes/PHY setup code, the Armada A38x support in mainline U-Boot is finally self-contained. So the complete image for booting can be built from mainline U-Boot. Without any additional external inclusion. Note: This code has undergone many hours (days!) of coding-style cleanup and refactoring. It still is not checkpatch clean though, I'm afraid. As the factoring of the code has so many levels of indentation that many lines are longer than 80 chars. Signed-off-by: Stefan Roese <sr@denx.de>
2015-03-26 14:36:56 +00:00
if (max_read_sample >= 0x1f)
max_read_sample = 0x1f;
CHECK_STATUS(ddr3_tip_if_write(dev_num, access_type, if_id,
ARM: mvebu: a38x: sync ddr training code with upstream This syncs drivers/ddr/marvell/a38x/ with the mv_ddr-armada-17.10 branch of https://github.com/MarvellEmbeddedProcessors/mv-ddr-marvell.git. The upstream code is incorporated omitting the ddr4 and apn806 and folding the nested a38x directory up one level. After that a semi-automated step is used to drop unused features with unifdef find drivers/ddr/marvell/a38x/ -name '*.[ch]' | \ xargs unifdef -m -UMV_DDR -UMV_DDR_ATF -UCONFIG_DDR4 \ -UCONFIG_APN806 -UCONFIG_MC_STATIC \ -UCONFIG_MC_STATIC_PRINT -UCONFIG_PHY_STATIC \ -UCONFIG_64BIT INTER_REGS_BASE is updated to be defined as SOC_REGS_PHY_BASE. Some now empty files are removed and the ternary license is replaced with a SPDX GPL-2.0+ identifier. Signed-off-by: Chris Packham <judge.packham@gmail.com> Signed-off-by: Stefan Roese <sr@denx.de>
2018-05-10 01:28:29 +00:00
DDR_ODT_TIMING_LOW_REG,
arm: mvebu: Add Armada 38x DDR3 training code from Marvell bin_hdr This patch adds the DDR3 setup and training code taken from the Marvell U-Boot repository. This code used to be included as a binary (bin_hdr) into the Armada A38x boot image. Not linked with the main U-Boot. With this code addition and the serdes/PHY setup code, the Armada A38x support in mainline U-Boot is finally self-contained. So the complete image for booting can be built from mainline U-Boot. Without any additional external inclusion. Note: This code has undergone many hours (days!) of coding-style cleanup and refactoring. It still is not checkpatch clean though, I'm afraid. As the factoring of the code has so many levels of indentation that many lines are longer than 80 chars. Signed-off-by: Stefan Roese <sr@denx.de>
2015-03-26 14:36:56 +00:00
((min_read_sample - 1) << 12),
0xf << 12));
CHECK_STATUS(ddr3_tip_if_write(dev_num, access_type, if_id,
ARM: mvebu: a38x: sync ddr training code with upstream This syncs drivers/ddr/marvell/a38x/ with the mv_ddr-armada-17.10 branch of https://github.com/MarvellEmbeddedProcessors/mv-ddr-marvell.git. The upstream code is incorporated omitting the ddr4 and apn806 and folding the nested a38x directory up one level. After that a semi-automated step is used to drop unused features with unifdef find drivers/ddr/marvell/a38x/ -name '*.[ch]' | \ xargs unifdef -m -UMV_DDR -UMV_DDR_ATF -UCONFIG_DDR4 \ -UCONFIG_APN806 -UCONFIG_MC_STATIC \ -UCONFIG_MC_STATIC_PRINT -UCONFIG_PHY_STATIC \ -UCONFIG_64BIT INTER_REGS_BASE is updated to be defined as SOC_REGS_PHY_BASE. Some now empty files are removed and the ternary license is replaced with a SPDX GPL-2.0+ identifier. Signed-off-by: Chris Packham <judge.packham@gmail.com> Signed-off-by: Stefan Roese <sr@denx.de>
2018-05-10 01:28:29 +00:00
DDR_ODT_TIMING_LOW_REG,
arm: mvebu: Add Armada 38x DDR3 training code from Marvell bin_hdr This patch adds the DDR3 setup and training code taken from the Marvell U-Boot repository. This code used to be included as a binary (bin_hdr) into the Armada A38x boot image. Not linked with the main U-Boot. With this code addition and the serdes/PHY setup code, the Armada A38x support in mainline U-Boot is finally self-contained. So the complete image for booting can be built from mainline U-Boot. Without any additional external inclusion. Note: This code has undergone many hours (days!) of coding-style cleanup and refactoring. It still is not checkpatch clean though, I'm afraid. As the factoring of the code has so many levels of indentation that many lines are longer than 80 chars. Signed-off-by: Stefan Roese <sr@denx.de>
2015-03-26 14:36:56 +00:00
(max_read_sample << 16),
0x1f << 16));
return MV_OK;
}
int get_valid_win_rx(u32 dev_num, u32 if_id, u8 res[4])
{
ARM: mvebu: a38x: sync ddr training code with upstream This syncs drivers/ddr/marvell/a38x/ with the mv_ddr-armada-17.10 branch of https://github.com/MarvellEmbeddedProcessors/mv-ddr-marvell.git. The upstream code is incorporated omitting the ddr4 and apn806 and folding the nested a38x directory up one level. After that a semi-automated step is used to drop unused features with unifdef find drivers/ddr/marvell/a38x/ -name '*.[ch]' | \ xargs unifdef -m -UMV_DDR -UMV_DDR_ATF -UCONFIG_DDR4 \ -UCONFIG_APN806 -UCONFIG_MC_STATIC \ -UCONFIG_MC_STATIC_PRINT -UCONFIG_PHY_STATIC \ -UCONFIG_64BIT INTER_REGS_BASE is updated to be defined as SOC_REGS_PHY_BASE. Some now empty files are removed and the ternary license is replaced with a SPDX GPL-2.0+ identifier. Signed-off-by: Chris Packham <judge.packham@gmail.com> Signed-off-by: Stefan Roese <sr@denx.de>
2018-05-10 01:28:29 +00:00
u32 reg_pup = RESULT_PHY_REG;
arm: mvebu: Add Armada 38x DDR3 training code from Marvell bin_hdr This patch adds the DDR3 setup and training code taken from the Marvell U-Boot repository. This code used to be included as a binary (bin_hdr) into the Armada A38x boot image. Not linked with the main U-Boot. With this code addition and the serdes/PHY setup code, the Armada A38x support in mainline U-Boot is finally self-contained. So the complete image for booting can be built from mainline U-Boot. Without any additional external inclusion. Note: This code has undergone many hours (days!) of coding-style cleanup and refactoring. It still is not checkpatch clean though, I'm afraid. As the factoring of the code has so many levels of indentation that many lines are longer than 80 chars. Signed-off-by: Stefan Roese <sr@denx.de>
2015-03-26 14:36:56 +00:00
u32 reg_data;
u32 cs_num;
int i;
cs_num = 0;
/* TBD */
reg_pup += cs_num;
for (i = 0; i < 4; i++) {
CHECK_STATUS(ddr3_tip_bus_read(dev_num, if_id,
ACCESS_TYPE_UNICAST, i,
DDR_PHY_DATA, reg_pup,
&reg_data));
ARM: mvebu: a38x: sync ddr training code with upstream This syncs drivers/ddr/marvell/a38x/ with the mv_ddr-armada-17.10 branch of https://github.com/MarvellEmbeddedProcessors/mv-ddr-marvell.git. The upstream code is incorporated omitting the ddr4 and apn806 and folding the nested a38x directory up one level. After that a semi-automated step is used to drop unused features with unifdef find drivers/ddr/marvell/a38x/ -name '*.[ch]' | \ xargs unifdef -m -UMV_DDR -UMV_DDR_ATF -UCONFIG_DDR4 \ -UCONFIG_APN806 -UCONFIG_MC_STATIC \ -UCONFIG_MC_STATIC_PRINT -UCONFIG_PHY_STATIC \ -UCONFIG_64BIT INTER_REGS_BASE is updated to be defined as SOC_REGS_PHY_BASE. Some now empty files are removed and the ternary license is replaced with a SPDX GPL-2.0+ identifier. Signed-off-by: Chris Packham <judge.packham@gmail.com> Signed-off-by: Stefan Roese <sr@denx.de>
2018-05-10 01:28:29 +00:00
res[i] = (reg_data >> RESULT_PHY_RX_OFFS) & 0x1f;
arm: mvebu: Add Armada 38x DDR3 training code from Marvell bin_hdr This patch adds the DDR3 setup and training code taken from the Marvell U-Boot repository. This code used to be included as a binary (bin_hdr) into the Armada A38x boot image. Not linked with the main U-Boot. With this code addition and the serdes/PHY setup code, the Armada A38x support in mainline U-Boot is finally self-contained. So the complete image for booting can be built from mainline U-Boot. Without any additional external inclusion. Note: This code has undergone many hours (days!) of coding-style cleanup and refactoring. It still is not checkpatch clean though, I'm afraid. As the factoring of the code has so many levels of indentation that many lines are longer than 80 chars. Signed-off-by: Stefan Roese <sr@denx.de>
2015-03-26 14:36:56 +00:00
}
return 0;
}
/*
* This algorithm deals with the vertical optimum from Voltage point of view
* of the sample signal.
* Voltage sample point can improve the Eye / window size of the bit and the
* pup.
* The problem is that it is tune for all DQ the same so there isn't any
* PBS like code.
* It is more like centralization.
* But because we don't have The training SM support we do it a bit more
* smart search to save time.
*/
int ddr3_tip_vref(u32 dev_num)
{
/*
* The Vref register have non linear order. Need to check what will be
* in future projects.
*/
u32 vref_map[8] = {
1, 2, 3, 4, 5, 6, 7, 0
};
/* State and parameter definitions */
u32 initial_step = VREF_INITIAL_STEP;
/* need to be assign with minus ????? */
u32 second_step = VREF_SECOND_STEP;
u32 algo_run_flag = 0, currrent_vref = 0;
u32 while_count = 0;
u32 pup = 0, if_id = 0, num_pup = 0, rep = 0;
u32 val = 0;
u32 reg_addr = 0xa8;
u32 copy_start_pattern, copy_end_pattern;
enum hws_result *flow_result = ddr3_tip_get_result_ptr(training_stage);
u8 res[4];
ARM: mvebu: a38x: sync ddr training code with upstream This syncs drivers/ddr/marvell/a38x/ with the mv_ddr-armada-17.10 branch of https://github.com/MarvellEmbeddedProcessors/mv-ddr-marvell.git. The upstream code is incorporated omitting the ddr4 and apn806 and folding the nested a38x directory up one level. After that a semi-automated step is used to drop unused features with unifdef find drivers/ddr/marvell/a38x/ -name '*.[ch]' | \ xargs unifdef -m -UMV_DDR -UMV_DDR_ATF -UCONFIG_DDR4 \ -UCONFIG_APN806 -UCONFIG_MC_STATIC \ -UCONFIG_MC_STATIC_PRINT -UCONFIG_PHY_STATIC \ -UCONFIG_64BIT INTER_REGS_BASE is updated to be defined as SOC_REGS_PHY_BASE. Some now empty files are removed and the ternary license is replaced with a SPDX GPL-2.0+ identifier. Signed-off-by: Chris Packham <judge.packham@gmail.com> Signed-off-by: Stefan Roese <sr@denx.de>
2018-05-10 01:28:29 +00:00
u32 octets_per_if_num = ddr3_tip_dev_attr_get(dev_num, MV_ATTR_OCTET_PER_INTERFACE);
struct mv_ddr_topology_map *tm = mv_ddr_topology_map_get();
arm: mvebu: Add Armada 38x DDR3 training code from Marvell bin_hdr This patch adds the DDR3 setup and training code taken from the Marvell U-Boot repository. This code used to be included as a binary (bin_hdr) into the Armada A38x boot image. Not linked with the main U-Boot. With this code addition and the serdes/PHY setup code, the Armada A38x support in mainline U-Boot is finally self-contained. So the complete image for booting can be built from mainline U-Boot. Without any additional external inclusion. Note: This code has undergone many hours (days!) of coding-style cleanup and refactoring. It still is not checkpatch clean though, I'm afraid. As the factoring of the code has so many levels of indentation that many lines are longer than 80 chars. Signed-off-by: Stefan Roese <sr@denx.de>
2015-03-26 14:36:56 +00:00
CHECK_STATUS(ddr3_tip_special_rx(dev_num));
/* save start/end pattern */
copy_start_pattern = start_pattern;
copy_end_pattern = end_pattern;
/* set vref as centralization pattern */
start_pattern = PATTERN_VREF;
end_pattern = PATTERN_VREF;
/* init params */
for (if_id = 0; if_id < MAX_INTERFACE_NUM; if_id++) {
ARM: mvebu: a38x: sync ddr training code with upstream This syncs drivers/ddr/marvell/a38x/ with the mv_ddr-armada-17.10 branch of https://github.com/MarvellEmbeddedProcessors/mv-ddr-marvell.git. The upstream code is incorporated omitting the ddr4 and apn806 and folding the nested a38x directory up one level. After that a semi-automated step is used to drop unused features with unifdef find drivers/ddr/marvell/a38x/ -name '*.[ch]' | \ xargs unifdef -m -UMV_DDR -UMV_DDR_ATF -UCONFIG_DDR4 \ -UCONFIG_APN806 -UCONFIG_MC_STATIC \ -UCONFIG_MC_STATIC_PRINT -UCONFIG_PHY_STATIC \ -UCONFIG_64BIT INTER_REGS_BASE is updated to be defined as SOC_REGS_PHY_BASE. Some now empty files are removed and the ternary license is replaced with a SPDX GPL-2.0+ identifier. Signed-off-by: Chris Packham <judge.packham@gmail.com> Signed-off-by: Stefan Roese <sr@denx.de>
2018-05-10 01:28:29 +00:00
VALIDATE_IF_ACTIVE(tm->if_act_mask, if_id);
arm: mvebu: Add Armada 38x DDR3 training code from Marvell bin_hdr This patch adds the DDR3 setup and training code taken from the Marvell U-Boot repository. This code used to be included as a binary (bin_hdr) into the Armada A38x boot image. Not linked with the main U-Boot. With this code addition and the serdes/PHY setup code, the Armada A38x support in mainline U-Boot is finally self-contained. So the complete image for booting can be built from mainline U-Boot. Without any additional external inclusion. Note: This code has undergone many hours (days!) of coding-style cleanup and refactoring. It still is not checkpatch clean though, I'm afraid. As the factoring of the code has so many levels of indentation that many lines are longer than 80 chars. Signed-off-by: Stefan Roese <sr@denx.de>
2015-03-26 14:36:56 +00:00
for (pup = 0;
ARM: mvebu: a38x: sync ddr training code with upstream This syncs drivers/ddr/marvell/a38x/ with the mv_ddr-armada-17.10 branch of https://github.com/MarvellEmbeddedProcessors/mv-ddr-marvell.git. The upstream code is incorporated omitting the ddr4 and apn806 and folding the nested a38x directory up one level. After that a semi-automated step is used to drop unused features with unifdef find drivers/ddr/marvell/a38x/ -name '*.[ch]' | \ xargs unifdef -m -UMV_DDR -UMV_DDR_ATF -UCONFIG_DDR4 \ -UCONFIG_APN806 -UCONFIG_MC_STATIC \ -UCONFIG_MC_STATIC_PRINT -UCONFIG_PHY_STATIC \ -UCONFIG_64BIT INTER_REGS_BASE is updated to be defined as SOC_REGS_PHY_BASE. Some now empty files are removed and the ternary license is replaced with a SPDX GPL-2.0+ identifier. Signed-off-by: Chris Packham <judge.packham@gmail.com> Signed-off-by: Stefan Roese <sr@denx.de>
2018-05-10 01:28:29 +00:00
pup < octets_per_if_num; pup++) {
arm: mvebu: Add Armada 38x DDR3 training code from Marvell bin_hdr This patch adds the DDR3 setup and training code taken from the Marvell U-Boot repository. This code used to be included as a binary (bin_hdr) into the Armada A38x boot image. Not linked with the main U-Boot. With this code addition and the serdes/PHY setup code, the Armada A38x support in mainline U-Boot is finally self-contained. So the complete image for booting can be built from mainline U-Boot. Without any additional external inclusion. Note: This code has undergone many hours (days!) of coding-style cleanup and refactoring. It still is not checkpatch clean though, I'm afraid. As the factoring of the code has so many levels of indentation that many lines are longer than 80 chars. Signed-off-by: Stefan Roese <sr@denx.de>
2015-03-26 14:36:56 +00:00
current_vref[pup][if_id] = 0;
last_vref[pup][if_id] = 0;
lim_vref[pup][if_id] = 0;
current_valid_window[pup][if_id] = 0;
last_valid_window[pup][if_id] = 0;
if (vref_window_size[if_id][pup] >
vref_window_size_th) {
pup_st[pup][if_id] = VREF_CONVERGE;
DEBUG_TRAINING_HW_ALG(
DEBUG_LEVEL_INFO,
("VREF config, IF[ %d ]pup[ %d ] - Vref tune not requered (%d)\n",
if_id, pup, __LINE__));
} else {
pup_st[pup][if_id] = VREF_STEP_1;
CHECK_STATUS(ddr3_tip_bus_read
(dev_num, if_id,
ACCESS_TYPE_UNICAST, pup,
DDR_PHY_DATA, reg_addr, &val));
CHECK_STATUS(ddr3_tip_bus_write
(dev_num, ACCESS_TYPE_UNICAST,
if_id, ACCESS_TYPE_UNICAST,
pup, DDR_PHY_DATA, reg_addr,
(val & (~0xf)) | vref_map[0]));
DEBUG_TRAINING_HW_ALG(
DEBUG_LEVEL_INFO,
("VREF config, IF[ %d ]pup[ %d ] - Vref = %X (%d)\n",
if_id, pup,
(val & (~0xf)) | vref_map[0],
__LINE__));
}
}
interface_state[if_id] = 0;
}
/* TODO: Set number of active interfaces */
ARM: mvebu: a38x: sync ddr training code with upstream This syncs drivers/ddr/marvell/a38x/ with the mv_ddr-armada-17.10 branch of https://github.com/MarvellEmbeddedProcessors/mv-ddr-marvell.git. The upstream code is incorporated omitting the ddr4 and apn806 and folding the nested a38x directory up one level. After that a semi-automated step is used to drop unused features with unifdef find drivers/ddr/marvell/a38x/ -name '*.[ch]' | \ xargs unifdef -m -UMV_DDR -UMV_DDR_ATF -UCONFIG_DDR4 \ -UCONFIG_APN806 -UCONFIG_MC_STATIC \ -UCONFIG_MC_STATIC_PRINT -UCONFIG_PHY_STATIC \ -UCONFIG_64BIT INTER_REGS_BASE is updated to be defined as SOC_REGS_PHY_BASE. Some now empty files are removed and the ternary license is replaced with a SPDX GPL-2.0+ identifier. Signed-off-by: Chris Packham <judge.packham@gmail.com> Signed-off-by: Stefan Roese <sr@denx.de>
2018-05-10 01:28:29 +00:00
num_pup = octets_per_if_num * MAX_INTERFACE_NUM;
arm: mvebu: Add Armada 38x DDR3 training code from Marvell bin_hdr This patch adds the DDR3 setup and training code taken from the Marvell U-Boot repository. This code used to be included as a binary (bin_hdr) into the Armada A38x boot image. Not linked with the main U-Boot. With this code addition and the serdes/PHY setup code, the Armada A38x support in mainline U-Boot is finally self-contained. So the complete image for booting can be built from mainline U-Boot. Without any additional external inclusion. Note: This code has undergone many hours (days!) of coding-style cleanup and refactoring. It still is not checkpatch clean though, I'm afraid. As the factoring of the code has so many levels of indentation that many lines are longer than 80 chars. Signed-off-by: Stefan Roese <sr@denx.de>
2015-03-26 14:36:56 +00:00
while ((algo_run_flag <= num_pup) & (while_count < 10)) {
while_count++;
for (rep = 1; rep < 4; rep++) {
ddr3_tip_centr_skip_min_win_check = 1;
ddr3_tip_centralization_rx(dev_num);
ddr3_tip_centr_skip_min_win_check = 0;
/* Read Valid window results only for non converge pups */
for (if_id = 0; if_id < MAX_INTERFACE_NUM; if_id++) {
ARM: mvebu: a38x: sync ddr training code with upstream This syncs drivers/ddr/marvell/a38x/ with the mv_ddr-armada-17.10 branch of https://github.com/MarvellEmbeddedProcessors/mv-ddr-marvell.git. The upstream code is incorporated omitting the ddr4 and apn806 and folding the nested a38x directory up one level. After that a semi-automated step is used to drop unused features with unifdef find drivers/ddr/marvell/a38x/ -name '*.[ch]' | \ xargs unifdef -m -UMV_DDR -UMV_DDR_ATF -UCONFIG_DDR4 \ -UCONFIG_APN806 -UCONFIG_MC_STATIC \ -UCONFIG_MC_STATIC_PRINT -UCONFIG_PHY_STATIC \ -UCONFIG_64BIT INTER_REGS_BASE is updated to be defined as SOC_REGS_PHY_BASE. Some now empty files are removed and the ternary license is replaced with a SPDX GPL-2.0+ identifier. Signed-off-by: Chris Packham <judge.packham@gmail.com> Signed-off-by: Stefan Roese <sr@denx.de>
2018-05-10 01:28:29 +00:00
VALIDATE_IF_ACTIVE(tm->if_act_mask, if_id);
arm: mvebu: Add Armada 38x DDR3 training code from Marvell bin_hdr This patch adds the DDR3 setup and training code taken from the Marvell U-Boot repository. This code used to be included as a binary (bin_hdr) into the Armada A38x boot image. Not linked with the main U-Boot. With this code addition and the serdes/PHY setup code, the Armada A38x support in mainline U-Boot is finally self-contained. So the complete image for booting can be built from mainline U-Boot. Without any additional external inclusion. Note: This code has undergone many hours (days!) of coding-style cleanup and refactoring. It still is not checkpatch clean though, I'm afraid. As the factoring of the code has so many levels of indentation that many lines are longer than 80 chars. Signed-off-by: Stefan Roese <sr@denx.de>
2015-03-26 14:36:56 +00:00
if (interface_state[if_id] != 4) {
get_valid_win_rx(dev_num, if_id, res);
for (pup = 0;
ARM: mvebu: a38x: sync ddr training code with upstream This syncs drivers/ddr/marvell/a38x/ with the mv_ddr-armada-17.10 branch of https://github.com/MarvellEmbeddedProcessors/mv-ddr-marvell.git. The upstream code is incorporated omitting the ddr4 and apn806 and folding the nested a38x directory up one level. After that a semi-automated step is used to drop unused features with unifdef find drivers/ddr/marvell/a38x/ -name '*.[ch]' | \ xargs unifdef -m -UMV_DDR -UMV_DDR_ATF -UCONFIG_DDR4 \ -UCONFIG_APN806 -UCONFIG_MC_STATIC \ -UCONFIG_MC_STATIC_PRINT -UCONFIG_PHY_STATIC \ -UCONFIG_64BIT INTER_REGS_BASE is updated to be defined as SOC_REGS_PHY_BASE. Some now empty files are removed and the ternary license is replaced with a SPDX GPL-2.0+ identifier. Signed-off-by: Chris Packham <judge.packham@gmail.com> Signed-off-by: Stefan Roese <sr@denx.de>
2018-05-10 01:28:29 +00:00
pup < octets_per_if_num;
arm: mvebu: Add Armada 38x DDR3 training code from Marvell bin_hdr This patch adds the DDR3 setup and training code taken from the Marvell U-Boot repository. This code used to be included as a binary (bin_hdr) into the Armada A38x boot image. Not linked with the main U-Boot. With this code addition and the serdes/PHY setup code, the Armada A38x support in mainline U-Boot is finally self-contained. So the complete image for booting can be built from mainline U-Boot. Without any additional external inclusion. Note: This code has undergone many hours (days!) of coding-style cleanup and refactoring. It still is not checkpatch clean though, I'm afraid. As the factoring of the code has so many levels of indentation that many lines are longer than 80 chars. Signed-off-by: Stefan Roese <sr@denx.de>
2015-03-26 14:36:56 +00:00
pup++) {
ARM: mvebu: a38x: sync ddr training code with upstream This syncs drivers/ddr/marvell/a38x/ with the mv_ddr-armada-17.10 branch of https://github.com/MarvellEmbeddedProcessors/mv-ddr-marvell.git. The upstream code is incorporated omitting the ddr4 and apn806 and folding the nested a38x directory up one level. After that a semi-automated step is used to drop unused features with unifdef find drivers/ddr/marvell/a38x/ -name '*.[ch]' | \ xargs unifdef -m -UMV_DDR -UMV_DDR_ATF -UCONFIG_DDR4 \ -UCONFIG_APN806 -UCONFIG_MC_STATIC \ -UCONFIG_MC_STATIC_PRINT -UCONFIG_PHY_STATIC \ -UCONFIG_64BIT INTER_REGS_BASE is updated to be defined as SOC_REGS_PHY_BASE. Some now empty files are removed and the ternary license is replaced with a SPDX GPL-2.0+ identifier. Signed-off-by: Chris Packham <judge.packham@gmail.com> Signed-off-by: Stefan Roese <sr@denx.de>
2018-05-10 01:28:29 +00:00
VALIDATE_BUS_ACTIVE
arm: mvebu: Add Armada 38x DDR3 training code from Marvell bin_hdr This patch adds the DDR3 setup and training code taken from the Marvell U-Boot repository. This code used to be included as a binary (bin_hdr) into the Armada A38x boot image. Not linked with the main U-Boot. With this code addition and the serdes/PHY setup code, the Armada A38x support in mainline U-Boot is finally self-contained. So the complete image for booting can be built from mainline U-Boot. Without any additional external inclusion. Note: This code has undergone many hours (days!) of coding-style cleanup and refactoring. It still is not checkpatch clean though, I'm afraid. As the factoring of the code has so many levels of indentation that many lines are longer than 80 chars. Signed-off-by: Stefan Roese <sr@denx.de>
2015-03-26 14:36:56 +00:00
(tm->bus_act_mask, pup);
if (pup_st[pup]
[if_id] ==
VREF_CONVERGE)
continue;
current_valid_window[pup]
[if_id] =
(current_valid_window[pup]
[if_id] * (rep - 1) +
1000 * res[pup]) / rep;
}
}
}
}
for (if_id = 0; if_id < MAX_INTERFACE_NUM; if_id++) {
ARM: mvebu: a38x: sync ddr training code with upstream This syncs drivers/ddr/marvell/a38x/ with the mv_ddr-armada-17.10 branch of https://github.com/MarvellEmbeddedProcessors/mv-ddr-marvell.git. The upstream code is incorporated omitting the ddr4 and apn806 and folding the nested a38x directory up one level. After that a semi-automated step is used to drop unused features with unifdef find drivers/ddr/marvell/a38x/ -name '*.[ch]' | \ xargs unifdef -m -UMV_DDR -UMV_DDR_ATF -UCONFIG_DDR4 \ -UCONFIG_APN806 -UCONFIG_MC_STATIC \ -UCONFIG_MC_STATIC_PRINT -UCONFIG_PHY_STATIC \ -UCONFIG_64BIT INTER_REGS_BASE is updated to be defined as SOC_REGS_PHY_BASE. Some now empty files are removed and the ternary license is replaced with a SPDX GPL-2.0+ identifier. Signed-off-by: Chris Packham <judge.packham@gmail.com> Signed-off-by: Stefan Roese <sr@denx.de>
2018-05-10 01:28:29 +00:00
VALIDATE_IF_ACTIVE(tm->if_act_mask, if_id);
arm: mvebu: Add Armada 38x DDR3 training code from Marvell bin_hdr This patch adds the DDR3 setup and training code taken from the Marvell U-Boot repository. This code used to be included as a binary (bin_hdr) into the Armada A38x boot image. Not linked with the main U-Boot. With this code addition and the serdes/PHY setup code, the Armada A38x support in mainline U-Boot is finally self-contained. So the complete image for booting can be built from mainline U-Boot. Without any additional external inclusion. Note: This code has undergone many hours (days!) of coding-style cleanup and refactoring. It still is not checkpatch clean though, I'm afraid. As the factoring of the code has so many levels of indentation that many lines are longer than 80 chars. Signed-off-by: Stefan Roese <sr@denx.de>
2015-03-26 14:36:56 +00:00
DEBUG_TRAINING_HW_ALG(
DEBUG_LEVEL_TRACE,
("current_valid_window: IF[ %d ] - ", if_id));
for (pup = 0;
ARM: mvebu: a38x: sync ddr training code with upstream This syncs drivers/ddr/marvell/a38x/ with the mv_ddr-armada-17.10 branch of https://github.com/MarvellEmbeddedProcessors/mv-ddr-marvell.git. The upstream code is incorporated omitting the ddr4 and apn806 and folding the nested a38x directory up one level. After that a semi-automated step is used to drop unused features with unifdef find drivers/ddr/marvell/a38x/ -name '*.[ch]' | \ xargs unifdef -m -UMV_DDR -UMV_DDR_ATF -UCONFIG_DDR4 \ -UCONFIG_APN806 -UCONFIG_MC_STATIC \ -UCONFIG_MC_STATIC_PRINT -UCONFIG_PHY_STATIC \ -UCONFIG_64BIT INTER_REGS_BASE is updated to be defined as SOC_REGS_PHY_BASE. Some now empty files are removed and the ternary license is replaced with a SPDX GPL-2.0+ identifier. Signed-off-by: Chris Packham <judge.packham@gmail.com> Signed-off-by: Stefan Roese <sr@denx.de>
2018-05-10 01:28:29 +00:00
pup < octets_per_if_num; pup++) {
VALIDATE_BUS_ACTIVE(tm->bus_act_mask, pup);
arm: mvebu: Add Armada 38x DDR3 training code from Marvell bin_hdr This patch adds the DDR3 setup and training code taken from the Marvell U-Boot repository. This code used to be included as a binary (bin_hdr) into the Armada A38x boot image. Not linked with the main U-Boot. With this code addition and the serdes/PHY setup code, the Armada A38x support in mainline U-Boot is finally self-contained. So the complete image for booting can be built from mainline U-Boot. Without any additional external inclusion. Note: This code has undergone many hours (days!) of coding-style cleanup and refactoring. It still is not checkpatch clean though, I'm afraid. As the factoring of the code has so many levels of indentation that many lines are longer than 80 chars. Signed-off-by: Stefan Roese <sr@denx.de>
2015-03-26 14:36:56 +00:00
DEBUG_TRAINING_HW_ALG(DEBUG_LEVEL_TRACE,
("%d ",
current_valid_window
[pup][if_id]));
}
DEBUG_TRAINING_HW_ALG(DEBUG_LEVEL_TRACE, ("\n"));
}
/* Compare results and respond as function of state */
for (if_id = 0; if_id < MAX_INTERFACE_NUM; if_id++) {
ARM: mvebu: a38x: sync ddr training code with upstream This syncs drivers/ddr/marvell/a38x/ with the mv_ddr-armada-17.10 branch of https://github.com/MarvellEmbeddedProcessors/mv-ddr-marvell.git. The upstream code is incorporated omitting the ddr4 and apn806 and folding the nested a38x directory up one level. After that a semi-automated step is used to drop unused features with unifdef find drivers/ddr/marvell/a38x/ -name '*.[ch]' | \ xargs unifdef -m -UMV_DDR -UMV_DDR_ATF -UCONFIG_DDR4 \ -UCONFIG_APN806 -UCONFIG_MC_STATIC \ -UCONFIG_MC_STATIC_PRINT -UCONFIG_PHY_STATIC \ -UCONFIG_64BIT INTER_REGS_BASE is updated to be defined as SOC_REGS_PHY_BASE. Some now empty files are removed and the ternary license is replaced with a SPDX GPL-2.0+ identifier. Signed-off-by: Chris Packham <judge.packham@gmail.com> Signed-off-by: Stefan Roese <sr@denx.de>
2018-05-10 01:28:29 +00:00
VALIDATE_IF_ACTIVE(tm->if_act_mask, if_id);
arm: mvebu: Add Armada 38x DDR3 training code from Marvell bin_hdr This patch adds the DDR3 setup and training code taken from the Marvell U-Boot repository. This code used to be included as a binary (bin_hdr) into the Armada A38x boot image. Not linked with the main U-Boot. With this code addition and the serdes/PHY setup code, the Armada A38x support in mainline U-Boot is finally self-contained. So the complete image for booting can be built from mainline U-Boot. Without any additional external inclusion. Note: This code has undergone many hours (days!) of coding-style cleanup and refactoring. It still is not checkpatch clean though, I'm afraid. As the factoring of the code has so many levels of indentation that many lines are longer than 80 chars. Signed-off-by: Stefan Roese <sr@denx.de>
2015-03-26 14:36:56 +00:00
for (pup = 0;
ARM: mvebu: a38x: sync ddr training code with upstream This syncs drivers/ddr/marvell/a38x/ with the mv_ddr-armada-17.10 branch of https://github.com/MarvellEmbeddedProcessors/mv-ddr-marvell.git. The upstream code is incorporated omitting the ddr4 and apn806 and folding the nested a38x directory up one level. After that a semi-automated step is used to drop unused features with unifdef find drivers/ddr/marvell/a38x/ -name '*.[ch]' | \ xargs unifdef -m -UMV_DDR -UMV_DDR_ATF -UCONFIG_DDR4 \ -UCONFIG_APN806 -UCONFIG_MC_STATIC \ -UCONFIG_MC_STATIC_PRINT -UCONFIG_PHY_STATIC \ -UCONFIG_64BIT INTER_REGS_BASE is updated to be defined as SOC_REGS_PHY_BASE. Some now empty files are removed and the ternary license is replaced with a SPDX GPL-2.0+ identifier. Signed-off-by: Chris Packham <judge.packham@gmail.com> Signed-off-by: Stefan Roese <sr@denx.de>
2018-05-10 01:28:29 +00:00
pup < octets_per_if_num; pup++) {
VALIDATE_BUS_ACTIVE(tm->bus_act_mask, pup);
arm: mvebu: Add Armada 38x DDR3 training code from Marvell bin_hdr This patch adds the DDR3 setup and training code taken from the Marvell U-Boot repository. This code used to be included as a binary (bin_hdr) into the Armada A38x boot image. Not linked with the main U-Boot. With this code addition and the serdes/PHY setup code, the Armada A38x support in mainline U-Boot is finally self-contained. So the complete image for booting can be built from mainline U-Boot. Without any additional external inclusion. Note: This code has undergone many hours (days!) of coding-style cleanup and refactoring. It still is not checkpatch clean though, I'm afraid. As the factoring of the code has so many levels of indentation that many lines are longer than 80 chars. Signed-off-by: Stefan Roese <sr@denx.de>
2015-03-26 14:36:56 +00:00
DEBUG_TRAINING_HW_ALG(DEBUG_LEVEL_TRACE,
("I/F[ %d ], pup[ %d ] STATE #%d (%d)\n",
if_id, pup,
pup_st[pup]
[if_id], __LINE__));
if (pup_st[pup][if_id] == VREF_CONVERGE)
continue;
DEBUG_TRAINING_HW_ALG(DEBUG_LEVEL_TRACE,
("I/F[ %d ], pup[ %d ] CHECK progress - Current %d Last %d, limit VREF %d (%d)\n",
if_id, pup,
current_valid_window[pup]
[if_id],
last_valid_window[pup]
[if_id], lim_vref[pup]
[if_id], __LINE__));
/*
* The -1 is for solution resolution +/- 1 tap
* of ADLL
*/
if (current_valid_window[pup][if_id] + 200 >=
(last_valid_window[pup][if_id])) {
if (pup_st[pup][if_id] == VREF_STEP_1) {
/*
* We stay in the same state and
* step just update the window
* size (take the max) and Vref
*/
if (current_vref[pup]
[if_id] == VREF_MAX_INDEX) {
/*
* If we step to the end
* and didn't converge
* to some particular
* better Vref value
* define the pup as
* converge and step
* back to nominal
* Vref.
*/
pup_st[pup]
[if_id] =
VREF_CONVERGE;
algo_run_flag++;
interface_state
[if_id]++;
DEBUG_TRAINING_HW_ALG
(DEBUG_LEVEL_TRACE,
("I/F[ %d ], pup[ %d ] VREF_CONVERGE - Vref = %X (%d)\n",
if_id, pup,
current_vref[pup]
[if_id],
__LINE__));
} else {
/* continue to update the Vref index */
current_vref[pup]
[if_id] =
((current_vref[pup]
[if_id] +
initial_step) >
VREF_MAX_INDEX) ?
VREF_MAX_INDEX
: (current_vref[pup]
[if_id] +
initial_step);
if (current_vref[pup]
[if_id] ==
VREF_MAX_INDEX) {
pup_st[pup]
[if_id]
=
VREF_STEP_2;
}
lim_vref[pup]
[if_id] =
last_vref[pup]
[if_id] =
current_vref[pup]
[if_id];
}
last_valid_window[pup]
[if_id] =
GET_MAX(current_valid_window
[pup][if_id],
last_valid_window
[pup]
[if_id]);
/* update the Vref for next stage */
currrent_vref =
current_vref[pup]
[if_id];
CHECK_STATUS
(ddr3_tip_bus_read
(dev_num, if_id,
ACCESS_TYPE_UNICAST, pup,
DDR_PHY_DATA, reg_addr,
&val));
CHECK_STATUS
(ddr3_tip_bus_write
(dev_num,
ACCESS_TYPE_UNICAST,
if_id,
ACCESS_TYPE_UNICAST, pup,
DDR_PHY_DATA, reg_addr,
(val & (~0xf)) |
vref_map[currrent_vref]));
DEBUG_TRAINING_HW_ALG
(DEBUG_LEVEL_TRACE,
("VREF config, IF[ %d ]pup[ %d ] - Vref = %X (%d)\n",
if_id, pup,
(val & (~0xf)) |
vref_map[currrent_vref],
__LINE__));
} else if (pup_st[pup][if_id]
== VREF_STEP_2) {
/*
* We keep on search back with
* the same step size.
*/
last_valid_window[pup]
[if_id] =
GET_MAX(current_valid_window
[pup][if_id],
last_valid_window
[pup]
[if_id]);
last_vref[pup][if_id] =
current_vref[pup]
[if_id];
/* we finish all search space */
if ((current_vref[pup]
[if_id] - second_step) == lim_vref[pup][if_id]) {
/*
* If we step to the end
* and didn't converge
* to some particular
* better Vref value
* define the pup as
* converge and step
* back to nominal
* Vref.
*/
pup_st[pup]
[if_id] =
VREF_CONVERGE;
algo_run_flag++;
interface_state
[if_id]++;
current_vref[pup]
[if_id] =
(current_vref[pup]
[if_id] -
second_step);
DEBUG_TRAINING_HW_ALG
(DEBUG_LEVEL_TRACE,
("I/F[ %d ], pup[ %d ] VREF_CONVERGE - Vref = %X (%d)\n",
if_id, pup,
current_vref[pup]
[if_id],
__LINE__));
} else
/* we finish all search space */
if (current_vref[pup]
[if_id] ==
lim_vref[pup]
[if_id]) {
/*
* If we step to the end
* and didn't converge
* to some particular
* better Vref value
* define the pup as
* converge and step
* back to nominal
* Vref.
*/
pup_st[pup]
[if_id] =
VREF_CONVERGE;
algo_run_flag++;
interface_state
[if_id]++;
DEBUG_TRAINING_HW_ALG
(DEBUG_LEVEL_TRACE,
("I/F[ %d ], pup[ %d ] VREF_CONVERGE - Vref = %X (%d)\n",
if_id, pup,
current_vref[pup]
[if_id],
__LINE__));
} else {
current_vref[pup]
[if_id] =
current_vref[pup]
[if_id] -
second_step;
}
/* Update the Vref for next stage */
currrent_vref =
current_vref[pup]
[if_id];
CHECK_STATUS
(ddr3_tip_bus_read
(dev_num, if_id,
ACCESS_TYPE_UNICAST, pup,
DDR_PHY_DATA, reg_addr,
&val));
CHECK_STATUS
(ddr3_tip_bus_write
(dev_num,
ACCESS_TYPE_UNICAST,
if_id,
ACCESS_TYPE_UNICAST, pup,
DDR_PHY_DATA, reg_addr,
(val & (~0xf)) |
vref_map[currrent_vref]));
DEBUG_TRAINING_HW_ALG
(DEBUG_LEVEL_TRACE,
("VREF config, IF[ %d ]pup[ %d ] - Vref = %X (%d)\n",
if_id, pup,
(val & (~0xf)) |
vref_map[currrent_vref],
__LINE__));
}
} else {
/* we change state and change step */
if (pup_st[pup][if_id] == VREF_STEP_1) {
pup_st[pup][if_id] =
VREF_STEP_2;
lim_vref[pup][if_id] =
current_vref[pup]
[if_id] - initial_step;
last_valid_window[pup]
[if_id] =
current_valid_window[pup]
[if_id];
last_vref[pup][if_id] =
current_vref[pup]
[if_id];
current_vref[pup][if_id] =
last_vref[pup][if_id] -
second_step;
/* Update the Vref for next stage */
CHECK_STATUS
(ddr3_tip_bus_read
(dev_num, if_id,
ACCESS_TYPE_UNICAST, pup,
DDR_PHY_DATA, reg_addr,
&val));
CHECK_STATUS
(ddr3_tip_bus_write
(dev_num,
ACCESS_TYPE_UNICAST,
if_id,
ACCESS_TYPE_UNICAST, pup,
DDR_PHY_DATA, reg_addr,
(val & (~0xf)) |
vref_map[current_vref[pup]
[if_id]]));
DEBUG_TRAINING_HW_ALG
(DEBUG_LEVEL_TRACE,
("VREF config, IF[ %d ]pup[ %d ] - Vref = %X (%d)\n",
if_id, pup,
(val & (~0xf)) |
vref_map[current_vref[pup]
[if_id]],
__LINE__));
} else if (pup_st[pup][if_id] == VREF_STEP_2) {
/*
* The last search was the max
* point set value and exit
*/
CHECK_STATUS
(ddr3_tip_bus_read
(dev_num, if_id,
ACCESS_TYPE_UNICAST, pup,
DDR_PHY_DATA, reg_addr,
&val));
CHECK_STATUS
(ddr3_tip_bus_write
(dev_num,
ACCESS_TYPE_UNICAST,
if_id,
ACCESS_TYPE_UNICAST, pup,
DDR_PHY_DATA, reg_addr,
(val & (~0xf)) |
vref_map[last_vref[pup]
[if_id]]));
DEBUG_TRAINING_HW_ALG
(DEBUG_LEVEL_TRACE,
("VREF config, IF[ %d ]pup[ %d ] - Vref = %X (%d)\n",
if_id, pup,
(val & (~0xf)) |
vref_map[last_vref[pup]
[if_id]],
__LINE__));
pup_st[pup][if_id] =
VREF_CONVERGE;
algo_run_flag++;
interface_state[if_id]++;
DEBUG_TRAINING_HW_ALG
(DEBUG_LEVEL_TRACE,
("I/F[ %d ], pup[ %d ] VREF_CONVERGE - Vref = %X (%d)\n",
if_id, pup,
current_vref[pup]
[if_id], __LINE__));
}
}
}
}
}
for (if_id = 0; if_id < MAX_INTERFACE_NUM; if_id++) {
ARM: mvebu: a38x: sync ddr training code with upstream This syncs drivers/ddr/marvell/a38x/ with the mv_ddr-armada-17.10 branch of https://github.com/MarvellEmbeddedProcessors/mv-ddr-marvell.git. The upstream code is incorporated omitting the ddr4 and apn806 and folding the nested a38x directory up one level. After that a semi-automated step is used to drop unused features with unifdef find drivers/ddr/marvell/a38x/ -name '*.[ch]' | \ xargs unifdef -m -UMV_DDR -UMV_DDR_ATF -UCONFIG_DDR4 \ -UCONFIG_APN806 -UCONFIG_MC_STATIC \ -UCONFIG_MC_STATIC_PRINT -UCONFIG_PHY_STATIC \ -UCONFIG_64BIT INTER_REGS_BASE is updated to be defined as SOC_REGS_PHY_BASE. Some now empty files are removed and the ternary license is replaced with a SPDX GPL-2.0+ identifier. Signed-off-by: Chris Packham <judge.packham@gmail.com> Signed-off-by: Stefan Roese <sr@denx.de>
2018-05-10 01:28:29 +00:00
VALIDATE_IF_ACTIVE(tm->if_act_mask, if_id);
arm: mvebu: Add Armada 38x DDR3 training code from Marvell bin_hdr This patch adds the DDR3 setup and training code taken from the Marvell U-Boot repository. This code used to be included as a binary (bin_hdr) into the Armada A38x boot image. Not linked with the main U-Boot. With this code addition and the serdes/PHY setup code, the Armada A38x support in mainline U-Boot is finally self-contained. So the complete image for booting can be built from mainline U-Boot. Without any additional external inclusion. Note: This code has undergone many hours (days!) of coding-style cleanup and refactoring. It still is not checkpatch clean though, I'm afraid. As the factoring of the code has so many levels of indentation that many lines are longer than 80 chars. Signed-off-by: Stefan Roese <sr@denx.de>
2015-03-26 14:36:56 +00:00
for (pup = 0;
ARM: mvebu: a38x: sync ddr training code with upstream This syncs drivers/ddr/marvell/a38x/ with the mv_ddr-armada-17.10 branch of https://github.com/MarvellEmbeddedProcessors/mv-ddr-marvell.git. The upstream code is incorporated omitting the ddr4 and apn806 and folding the nested a38x directory up one level. After that a semi-automated step is used to drop unused features with unifdef find drivers/ddr/marvell/a38x/ -name '*.[ch]' | \ xargs unifdef -m -UMV_DDR -UMV_DDR_ATF -UCONFIG_DDR4 \ -UCONFIG_APN806 -UCONFIG_MC_STATIC \ -UCONFIG_MC_STATIC_PRINT -UCONFIG_PHY_STATIC \ -UCONFIG_64BIT INTER_REGS_BASE is updated to be defined as SOC_REGS_PHY_BASE. Some now empty files are removed and the ternary license is replaced with a SPDX GPL-2.0+ identifier. Signed-off-by: Chris Packham <judge.packham@gmail.com> Signed-off-by: Stefan Roese <sr@denx.de>
2018-05-10 01:28:29 +00:00
pup < octets_per_if_num; pup++) {
VALIDATE_BUS_ACTIVE(tm->bus_act_mask, pup);
arm: mvebu: Add Armada 38x DDR3 training code from Marvell bin_hdr This patch adds the DDR3 setup and training code taken from the Marvell U-Boot repository. This code used to be included as a binary (bin_hdr) into the Armada A38x boot image. Not linked with the main U-Boot. With this code addition and the serdes/PHY setup code, the Armada A38x support in mainline U-Boot is finally self-contained. So the complete image for booting can be built from mainline U-Boot. Without any additional external inclusion. Note: This code has undergone many hours (days!) of coding-style cleanup and refactoring. It still is not checkpatch clean though, I'm afraid. As the factoring of the code has so many levels of indentation that many lines are longer than 80 chars. Signed-off-by: Stefan Roese <sr@denx.de>
2015-03-26 14:36:56 +00:00
CHECK_STATUS(ddr3_tip_bus_read
(dev_num, if_id,
ACCESS_TYPE_UNICAST, pup,
DDR_PHY_DATA, reg_addr, &val));
DEBUG_TRAINING_HW_ALG(
DEBUG_LEVEL_INFO,
("FINAL values: I/F[ %d ], pup[ %d ] - Vref = %X (%d)\n",
if_id, pup, val, __LINE__));
}
}
flow_result[if_id] = TEST_SUCCESS;
/* restore start/end pattern */
start_pattern = copy_start_pattern;
end_pattern = copy_end_pattern;
return 0;
}
/*
* CK/CA Delay
*/
int ddr3_tip_cmd_addr_init_delay(u32 dev_num, u32 adll_tap)
{
u32 if_id = 0;
u32 ck_num_adll_tap = 0, ca_num_adll_tap = 0, data = 0;
ARM: mvebu: a38x: sync ddr training code with upstream This syncs drivers/ddr/marvell/a38x/ with the mv_ddr-armada-17.10 branch of https://github.com/MarvellEmbeddedProcessors/mv-ddr-marvell.git. The upstream code is incorporated omitting the ddr4 and apn806 and folding the nested a38x directory up one level. After that a semi-automated step is used to drop unused features with unifdef find drivers/ddr/marvell/a38x/ -name '*.[ch]' | \ xargs unifdef -m -UMV_DDR -UMV_DDR_ATF -UCONFIG_DDR4 \ -UCONFIG_APN806 -UCONFIG_MC_STATIC \ -UCONFIG_MC_STATIC_PRINT -UCONFIG_PHY_STATIC \ -UCONFIG_64BIT INTER_REGS_BASE is updated to be defined as SOC_REGS_PHY_BASE. Some now empty files are removed and the ternary license is replaced with a SPDX GPL-2.0+ identifier. Signed-off-by: Chris Packham <judge.packham@gmail.com> Signed-off-by: Stefan Roese <sr@denx.de>
2018-05-10 01:28:29 +00:00
struct mv_ddr_topology_map *tm = mv_ddr_topology_map_get();
arm: mvebu: Add Armada 38x DDR3 training code from Marvell bin_hdr This patch adds the DDR3 setup and training code taken from the Marvell U-Boot repository. This code used to be included as a binary (bin_hdr) into the Armada A38x boot image. Not linked with the main U-Boot. With this code addition and the serdes/PHY setup code, the Armada A38x support in mainline U-Boot is finally self-contained. So the complete image for booting can be built from mainline U-Boot. Without any additional external inclusion. Note: This code has undergone many hours (days!) of coding-style cleanup and refactoring. It still is not checkpatch clean though, I'm afraid. As the factoring of the code has so many levels of indentation that many lines are longer than 80 chars. Signed-off-by: Stefan Roese <sr@denx.de>
2015-03-26 14:36:56 +00:00
/*
* ck_delay_table is delaying the of the clock signal only.
* (to overcome timing issues between_c_k & command/address signals)
*/
/*
* ca_delay is delaying the of the entire command & Address signals
* (include Clock signal to overcome DGL error on the Clock versus
* the DQS).
*/
/* Calc ADLL Tap */
ARM: mvebu: a38x: sync ddr training code with upstream This syncs drivers/ddr/marvell/a38x/ with the mv_ddr-armada-17.10 branch of https://github.com/MarvellEmbeddedProcessors/mv-ddr-marvell.git. The upstream code is incorporated omitting the ddr4 and apn806 and folding the nested a38x directory up one level. After that a semi-automated step is used to drop unused features with unifdef find drivers/ddr/marvell/a38x/ -name '*.[ch]' | \ xargs unifdef -m -UMV_DDR -UMV_DDR_ATF -UCONFIG_DDR4 \ -UCONFIG_APN806 -UCONFIG_MC_STATIC \ -UCONFIG_MC_STATIC_PRINT -UCONFIG_PHY_STATIC \ -UCONFIG_64BIT INTER_REGS_BASE is updated to be defined as SOC_REGS_PHY_BASE. Some now empty files are removed and the ternary license is replaced with a SPDX GPL-2.0+ identifier. Signed-off-by: Chris Packham <judge.packham@gmail.com> Signed-off-by: Stefan Roese <sr@denx.de>
2018-05-10 01:28:29 +00:00
if (ck_delay == PARAM_UNDEFINED)
arm: mvebu: Add Armada 38x DDR3 training code from Marvell bin_hdr This patch adds the DDR3 setup and training code taken from the Marvell U-Boot repository. This code used to be included as a binary (bin_hdr) into the Armada A38x boot image. Not linked with the main U-Boot. With this code addition and the serdes/PHY setup code, the Armada A38x support in mainline U-Boot is finally self-contained. So the complete image for booting can be built from mainline U-Boot. Without any additional external inclusion. Note: This code has undergone many hours (days!) of coding-style cleanup and refactoring. It still is not checkpatch clean though, I'm afraid. As the factoring of the code has so many levels of indentation that many lines are longer than 80 chars. Signed-off-by: Stefan Roese <sr@denx.de>
2015-03-26 14:36:56 +00:00
DEBUG_TRAINING_HW_ALG(
DEBUG_LEVEL_ERROR,
ARM: mvebu: a38x: sync ddr training code with upstream This syncs drivers/ddr/marvell/a38x/ with the mv_ddr-armada-17.10 branch of https://github.com/MarvellEmbeddedProcessors/mv-ddr-marvell.git. The upstream code is incorporated omitting the ddr4 and apn806 and folding the nested a38x directory up one level. After that a semi-automated step is used to drop unused features with unifdef find drivers/ddr/marvell/a38x/ -name '*.[ch]' | \ xargs unifdef -m -UMV_DDR -UMV_DDR_ATF -UCONFIG_DDR4 \ -UCONFIG_APN806 -UCONFIG_MC_STATIC \ -UCONFIG_MC_STATIC_PRINT -UCONFIG_PHY_STATIC \ -UCONFIG_64BIT INTER_REGS_BASE is updated to be defined as SOC_REGS_PHY_BASE. Some now empty files are removed and the ternary license is replaced with a SPDX GPL-2.0+ identifier. Signed-off-by: Chris Packham <judge.packham@gmail.com> Signed-off-by: Stefan Roese <sr@denx.de>
2018-05-10 01:28:29 +00:00
("ERROR: ck_delay is not initialized!\n"));
arm: mvebu: Add Armada 38x DDR3 training code from Marvell bin_hdr This patch adds the DDR3 setup and training code taken from the Marvell U-Boot repository. This code used to be included as a binary (bin_hdr) into the Armada A38x boot image. Not linked with the main U-Boot. With this code addition and the serdes/PHY setup code, the Armada A38x support in mainline U-Boot is finally self-contained. So the complete image for booting can be built from mainline U-Boot. Without any additional external inclusion. Note: This code has undergone many hours (days!) of coding-style cleanup and refactoring. It still is not checkpatch clean though, I'm afraid. As the factoring of the code has so many levels of indentation that many lines are longer than 80 chars. Signed-off-by: Stefan Roese <sr@denx.de>
2015-03-26 14:36:56 +00:00
for (if_id = 0; if_id <= MAX_INTERFACE_NUM - 1; if_id++) {
ARM: mvebu: a38x: sync ddr training code with upstream This syncs drivers/ddr/marvell/a38x/ with the mv_ddr-armada-17.10 branch of https://github.com/MarvellEmbeddedProcessors/mv-ddr-marvell.git. The upstream code is incorporated omitting the ddr4 and apn806 and folding the nested a38x directory up one level. After that a semi-automated step is used to drop unused features with unifdef find drivers/ddr/marvell/a38x/ -name '*.[ch]' | \ xargs unifdef -m -UMV_DDR -UMV_DDR_ATF -UCONFIG_DDR4 \ -UCONFIG_APN806 -UCONFIG_MC_STATIC \ -UCONFIG_MC_STATIC_PRINT -UCONFIG_PHY_STATIC \ -UCONFIG_64BIT INTER_REGS_BASE is updated to be defined as SOC_REGS_PHY_BASE. Some now empty files are removed and the ternary license is replaced with a SPDX GPL-2.0+ identifier. Signed-off-by: Chris Packham <judge.packham@gmail.com> Signed-off-by: Stefan Roese <sr@denx.de>
2018-05-10 01:28:29 +00:00
VALIDATE_IF_ACTIVE(tm->if_act_mask, if_id);
arm: mvebu: Add Armada 38x DDR3 training code from Marvell bin_hdr This patch adds the DDR3 setup and training code taken from the Marvell U-Boot repository. This code used to be included as a binary (bin_hdr) into the Armada A38x boot image. Not linked with the main U-Boot. With this code addition and the serdes/PHY setup code, the Armada A38x support in mainline U-Boot is finally self-contained. So the complete image for booting can be built from mainline U-Boot. Without any additional external inclusion. Note: This code has undergone many hours (days!) of coding-style cleanup and refactoring. It still is not checkpatch clean though, I'm afraid. As the factoring of the code has so many levels of indentation that many lines are longer than 80 chars. Signed-off-by: Stefan Roese <sr@denx.de>
2015-03-26 14:36:56 +00:00
ARM: mvebu: a38x: sync ddr training code with upstream This syncs drivers/ddr/marvell/a38x/ with the mv_ddr-armada-17.10 branch of https://github.com/MarvellEmbeddedProcessors/mv-ddr-marvell.git. The upstream code is incorporated omitting the ddr4 and apn806 and folding the nested a38x directory up one level. After that a semi-automated step is used to drop unused features with unifdef find drivers/ddr/marvell/a38x/ -name '*.[ch]' | \ xargs unifdef -m -UMV_DDR -UMV_DDR_ATF -UCONFIG_DDR4 \ -UCONFIG_APN806 -UCONFIG_MC_STATIC \ -UCONFIG_MC_STATIC_PRINT -UCONFIG_PHY_STATIC \ -UCONFIG_64BIT INTER_REGS_BASE is updated to be defined as SOC_REGS_PHY_BASE. Some now empty files are removed and the ternary license is replaced with a SPDX GPL-2.0+ identifier. Signed-off-by: Chris Packham <judge.packham@gmail.com> Signed-off-by: Stefan Roese <sr@denx.de>
2018-05-10 01:28:29 +00:00
/* Calc delay ps in ADLL tap */
ck_num_adll_tap = ck_delay / adll_tap;
arm: mvebu: Add Armada 38x DDR3 training code from Marvell bin_hdr This patch adds the DDR3 setup and training code taken from the Marvell U-Boot repository. This code used to be included as a binary (bin_hdr) into the Armada A38x boot image. Not linked with the main U-Boot. With this code addition and the serdes/PHY setup code, the Armada A38x support in mainline U-Boot is finally self-contained. So the complete image for booting can be built from mainline U-Boot. Without any additional external inclusion. Note: This code has undergone many hours (days!) of coding-style cleanup and refactoring. It still is not checkpatch clean though, I'm afraid. As the factoring of the code has so many levels of indentation that many lines are longer than 80 chars. Signed-off-by: Stefan Roese <sr@denx.de>
2015-03-26 14:36:56 +00:00
ca_num_adll_tap = ca_delay / adll_tap;
ARM: mvebu: a38x: sync ddr training code with upstream This syncs drivers/ddr/marvell/a38x/ with the mv_ddr-armada-17.10 branch of https://github.com/MarvellEmbeddedProcessors/mv-ddr-marvell.git. The upstream code is incorporated omitting the ddr4 and apn806 and folding the nested a38x directory up one level. After that a semi-automated step is used to drop unused features with unifdef find drivers/ddr/marvell/a38x/ -name '*.[ch]' | \ xargs unifdef -m -UMV_DDR -UMV_DDR_ATF -UCONFIG_DDR4 \ -UCONFIG_APN806 -UCONFIG_MC_STATIC \ -UCONFIG_MC_STATIC_PRINT -UCONFIG_PHY_STATIC \ -UCONFIG_64BIT INTER_REGS_BASE is updated to be defined as SOC_REGS_PHY_BASE. Some now empty files are removed and the ternary license is replaced with a SPDX GPL-2.0+ identifier. Signed-off-by: Chris Packham <judge.packham@gmail.com> Signed-off-by: Stefan Roese <sr@denx.de>
2018-05-10 01:28:29 +00:00
arm: mvebu: Add Armada 38x DDR3 training code from Marvell bin_hdr This patch adds the DDR3 setup and training code taken from the Marvell U-Boot repository. This code used to be included as a binary (bin_hdr) into the Armada A38x boot image. Not linked with the main U-Boot. With this code addition and the serdes/PHY setup code, the Armada A38x support in mainline U-Boot is finally self-contained. So the complete image for booting can be built from mainline U-Boot. Without any additional external inclusion. Note: This code has undergone many hours (days!) of coding-style cleanup and refactoring. It still is not checkpatch clean though, I'm afraid. As the factoring of the code has so many levels of indentation that many lines are longer than 80 chars. Signed-off-by: Stefan Roese <sr@denx.de>
2015-03-26 14:36:56 +00:00
data = (ck_num_adll_tap & 0x3f) +
((ca_num_adll_tap & 0x3f) << 10);
/*
* Set the ADLL number to the CK ADLL for Interfaces for
* all Pup
*/
DEBUG_TRAINING_HW_ALG(
DEBUG_LEVEL_TRACE,
("ck_num_adll_tap %d ca_num_adll_tap %d adll_tap %d\n",
ck_num_adll_tap, ca_num_adll_tap, adll_tap));
CHECK_STATUS(ddr3_tip_bus_write(dev_num, ACCESS_TYPE_UNICAST,
if_id, ACCESS_TYPE_MULTICAST,
PARAM_NOT_CARE, DDR_PHY_CONTROL,
0x0, data));
}
return MV_OK;
}
Reference in a new issue Copy permalink