mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-26 21:13:48 +00:00
349 lines
8.4 KiB
C
349 lines
8.4 KiB
C
|
// SPDX-License-Identifier: GPL-2.0+
|
||
|
/*
|
||
|
* NXP C45 PHY driver
|
||
|
*
|
||
|
* Copyright 2021 NXP
|
||
|
* Author: Radu Pirea <radu-nicolae.pirea@oss.nxp.com>
|
||
|
*/
|
||
|
#include <common.h>
|
||
|
#include <dm.h>
|
||
|
#include <dm/devres.h>
|
||
|
#include <linux/delay.h>
|
||
|
#include <linux/math64.h>
|
||
|
#include <linux/mdio.h>
|
||
|
#include <phy.h>
|
||
|
|
||
|
#define PHY_ID_TJA_1103 0x001BB010
|
||
|
|
||
|
#define VEND1_DEVICE_CONTROL 0x0040
|
||
|
#define DEVICE_CONTROL_RESET BIT(15)
|
||
|
#define DEVICE_CONTROL_CONFIG_GLOBAL_EN BIT(14)
|
||
|
#define DEVICE_CONTROL_CONFIG_ALL_EN BIT(13)
|
||
|
|
||
|
#define VEND1_PORT_CONTROL 0x8040
|
||
|
#define PORT_CONTROL_EN BIT(14)
|
||
|
|
||
|
#define VEND1_PHY_CONTROL 0x8100
|
||
|
#define PHY_CONFIG_EN BIT(14)
|
||
|
#define PHY_START_OP BIT(0)
|
||
|
|
||
|
#define VEND1_PHY_CONFIG 0x8108
|
||
|
#define PHY_CONFIG_AUTO BIT(0)
|
||
|
|
||
|
#define VEND1_PORT_INFRA_CONTROL 0xAC00
|
||
|
#define PORT_INFRA_CONTROL_EN BIT(14)
|
||
|
|
||
|
#define VEND1_RXID 0xAFCC
|
||
|
#define VEND1_TXID 0xAFCD
|
||
|
#define ID_ENABLE BIT(15)
|
||
|
|
||
|
#define VEND1_ABILITIES 0xAFC4
|
||
|
#define RGMII_ID_ABILITY BIT(15)
|
||
|
#define RGMII_ABILITY BIT(14)
|
||
|
#define RMII_ABILITY BIT(10)
|
||
|
#define REVMII_ABILITY BIT(9)
|
||
|
#define MII_ABILITY BIT(8)
|
||
|
#define SGMII_ABILITY BIT(0)
|
||
|
|
||
|
#define VEND1_MII_BASIC_CONFIG 0xAFC6
|
||
|
#define MII_BASIC_CONFIG_REV BIT(8)
|
||
|
#define MII_BASIC_CONFIG_SGMII 0x9
|
||
|
#define MII_BASIC_CONFIG_RGMII 0x7
|
||
|
#define MII_BASIC_CONFIG_RMII 0x5
|
||
|
#define MII_BASIC_CONFIG_MII 0x4
|
||
|
|
||
|
#define RGMII_PERIOD_PS 8000U
|
||
|
#define PS_PER_DEGREE div_u64(RGMII_PERIOD_PS, 360)
|
||
|
#define MIN_ID_PS 1644U
|
||
|
#define MAX_ID_PS 2260U
|
||
|
#define DEFAULT_ID_PS 2000U
|
||
|
|
||
|
#define RESET_DELAY_MS 25
|
||
|
#define CONF_EN_DELAY_US 450
|
||
|
|
||
|
struct nxp_c45_phy {
|
||
|
u32 tx_delay;
|
||
|
u32 rx_delay;
|
||
|
};
|
||
|
|
||
|
static int nxp_c45_soft_reset(struct phy_device *phydev)
|
||
|
{
|
||
|
int tries = 10, ret;
|
||
|
|
||
|
ret = phy_write_mmd(phydev, MDIO_MMD_VEND1, VEND1_DEVICE_CONTROL,
|
||
|
DEVICE_CONTROL_RESET);
|
||
|
if (ret)
|
||
|
return ret;
|
||
|
|
||
|
do {
|
||
|
ret = phy_read_mmd(phydev, MDIO_MMD_VEND1,
|
||
|
VEND1_DEVICE_CONTROL);
|
||
|
if (!(ret & DEVICE_CONTROL_RESET))
|
||
|
return 0;
|
||
|
mdelay(RESET_DELAY_MS);
|
||
|
} while (tries--);
|
||
|
|
||
|
return -EIO;
|
||
|
}
|
||
|
|
||
|
static int nxp_c45_start_op(struct phy_device *phydev)
|
||
|
{
|
||
|
return phy_write_mmd(phydev, MDIO_MMD_VEND1, VEND1_PHY_CONTROL,
|
||
|
PHY_START_OP);
|
||
|
}
|
||
|
|
||
|
static int nxp_c45_config_enable(struct phy_device *phydev)
|
||
|
{
|
||
|
phy_write_mmd(phydev, MDIO_MMD_VEND1, VEND1_DEVICE_CONTROL,
|
||
|
DEVICE_CONTROL_CONFIG_GLOBAL_EN |
|
||
|
DEVICE_CONTROL_CONFIG_ALL_EN);
|
||
|
udelay(CONF_EN_DELAY_US);
|
||
|
|
||
|
phy_write_mmd(phydev, MDIO_MMD_VEND1, VEND1_PORT_CONTROL,
|
||
|
PORT_CONTROL_EN);
|
||
|
phy_write_mmd(phydev, MDIO_MMD_VEND1, VEND1_PHY_CONTROL,
|
||
|
PHY_CONFIG_EN);
|
||
|
phy_write_mmd(phydev, MDIO_MMD_VEND1, VEND1_PORT_INFRA_CONTROL,
|
||
|
PORT_INFRA_CONTROL_EN);
|
||
|
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static u64 nxp_c45_get_phase_shift(u64 phase_offset_raw)
|
||
|
{
|
||
|
/* The delay in degree phase is 73.8 + phase_offset_raw * 0.9.
|
||
|
* To avoid floating point operations we'll multiply by 10
|
||
|
* and get 1 decimal point precision.
|
||
|
*/
|
||
|
phase_offset_raw *= 10;
|
||
|
phase_offset_raw -= 738;
|
||
|
return div_u64(phase_offset_raw, 9);
|
||
|
}
|
||
|
|
||
|
static void nxp_c45_disable_delays(struct phy_device *phydev)
|
||
|
{
|
||
|
phy_write_mmd(phydev, MDIO_MMD_VEND1, VEND1_TXID, 0);
|
||
|
phy_write_mmd(phydev, MDIO_MMD_VEND1, VEND1_RXID, 0);
|
||
|
}
|
||
|
|
||
|
static int nxp_c45_check_delay(struct phy_device *phydev, u32 delay)
|
||
|
{
|
||
|
if (delay < MIN_ID_PS) {
|
||
|
pr_err("%s: delay value smaller than %u\n",
|
||
|
phydev->drv->name, MIN_ID_PS);
|
||
|
return -EINVAL;
|
||
|
}
|
||
|
|
||
|
if (delay > MAX_ID_PS) {
|
||
|
pr_err("%s: delay value higher than %u\n",
|
||
|
phydev->drv->name, MAX_ID_PS);
|
||
|
return -EINVAL;
|
||
|
}
|
||
|
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static int nxp_c45_get_delays(struct phy_device *phydev)
|
||
|
{
|
||
|
struct nxp_c45_phy *priv = phydev->priv;
|
||
|
int ret;
|
||
|
|
||
|
if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID ||
|
||
|
phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID) {
|
||
|
ret = dev_read_u32(phydev->dev, "tx-internal-delay-ps",
|
||
|
&priv->tx_delay);
|
||
|
if (ret)
|
||
|
priv->tx_delay = DEFAULT_ID_PS;
|
||
|
|
||
|
ret = nxp_c45_check_delay(phydev, priv->tx_delay);
|
||
|
if (ret) {
|
||
|
pr_err("%s: tx-internal-delay-ps invalid value\n",
|
||
|
phydev->drv->name);
|
||
|
return ret;
|
||
|
}
|
||
|
}
|
||
|
|
||
|
if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID ||
|
||
|
phydev->interface == PHY_INTERFACE_MODE_RGMII_RXID) {
|
||
|
ret = dev_read_u32(phydev->dev, "rx-internal-delay-ps",
|
||
|
&priv->rx_delay);
|
||
|
if (ret)
|
||
|
priv->rx_delay = DEFAULT_ID_PS;
|
||
|
|
||
|
ret = nxp_c45_check_delay(phydev, priv->rx_delay);
|
||
|
if (ret) {
|
||
|
pr_err("%s: rx-internal-delay-ps invalid value\n",
|
||
|
phydev->drv->name);
|
||
|
return ret;
|
||
|
}
|
||
|
}
|
||
|
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static void nxp_c45_set_delays(struct phy_device *phydev)
|
||
|
{
|
||
|
struct nxp_c45_phy *priv = phydev->priv;
|
||
|
u64 tx_delay = priv->tx_delay;
|
||
|
u64 rx_delay = priv->rx_delay;
|
||
|
u64 degree;
|
||
|
|
||
|
if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID ||
|
||
|
phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID) {
|
||
|
degree = div_u64(tx_delay, PS_PER_DEGREE);
|
||
|
phy_write_mmd(phydev, MDIO_MMD_VEND1, VEND1_TXID,
|
||
|
ID_ENABLE | nxp_c45_get_phase_shift(degree));
|
||
|
} else {
|
||
|
phy_write_mmd(phydev, MDIO_MMD_VEND1, VEND1_TXID, 0);
|
||
|
}
|
||
|
|
||
|
if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID ||
|
||
|
phydev->interface == PHY_INTERFACE_MODE_RGMII_RXID) {
|
||
|
degree = div_u64(rx_delay, PS_PER_DEGREE);
|
||
|
phy_write_mmd(phydev, MDIO_MMD_VEND1, VEND1_RXID,
|
||
|
ID_ENABLE | nxp_c45_get_phase_shift(degree));
|
||
|
} else {
|
||
|
phy_write_mmd(phydev, MDIO_MMD_VEND1, VEND1_RXID, 0);
|
||
|
}
|
||
|
}
|
||
|
|
||
|
static int nxp_c45_set_phy_mode(struct phy_device *phydev)
|
||
|
{
|
||
|
int ret;
|
||
|
|
||
|
ret = phy_read_mmd(phydev, MDIO_MMD_VEND1, VEND1_ABILITIES);
|
||
|
pr_debug("%s: Clause 45 managed PHY abilities 0x%x\n",
|
||
|
phydev->drv->name, ret);
|
||
|
|
||
|
switch (phydev->interface) {
|
||
|
case PHY_INTERFACE_MODE_RGMII:
|
||
|
if (!(ret & RGMII_ABILITY)) {
|
||
|
pr_err("%s: rgmii mode not supported\n",
|
||
|
phydev->drv->name);
|
||
|
return -EINVAL;
|
||
|
}
|
||
|
phy_write_mmd(phydev, MDIO_MMD_VEND1, VEND1_MII_BASIC_CONFIG,
|
||
|
MII_BASIC_CONFIG_RGMII);
|
||
|
nxp_c45_disable_delays(phydev);
|
||
|
break;
|
||
|
case PHY_INTERFACE_MODE_RGMII_ID:
|
||
|
case PHY_INTERFACE_MODE_RGMII_TXID:
|
||
|
case PHY_INTERFACE_MODE_RGMII_RXID:
|
||
|
if (!(ret & RGMII_ID_ABILITY)) {
|
||
|
pr_err("%s: rgmii-id, rgmii-txid, rgmii-rxid modes are not supported\n",
|
||
|
phydev->drv->name);
|
||
|
return -EINVAL;
|
||
|
}
|
||
|
phy_write_mmd(phydev, MDIO_MMD_VEND1, VEND1_MII_BASIC_CONFIG,
|
||
|
MII_BASIC_CONFIG_RGMII);
|
||
|
ret = nxp_c45_get_delays(phydev);
|
||
|
if (ret)
|
||
|
return ret;
|
||
|
|
||
|
nxp_c45_set_delays(phydev);
|
||
|
break;
|
||
|
case PHY_INTERFACE_MODE_MII:
|
||
|
if (!(ret & MII_ABILITY)) {
|
||
|
pr_err("%s: mii mode not supported\n",
|
||
|
phydev->drv->name);
|
||
|
return -EINVAL;
|
||
|
}
|
||
|
phy_write_mmd(phydev, MDIO_MMD_VEND1, VEND1_MII_BASIC_CONFIG,
|
||
|
MII_BASIC_CONFIG_MII);
|
||
|
break;
|
||
|
case PHY_INTERFACE_MODE_RMII:
|
||
|
if (!(ret & RMII_ABILITY)) {
|
||
|
pr_err("%s: rmii mode not supported\n",
|
||
|
phydev->drv->name);
|
||
|
return -EINVAL;
|
||
|
}
|
||
|
phy_write_mmd(phydev, MDIO_MMD_VEND1, VEND1_MII_BASIC_CONFIG,
|
||
|
MII_BASIC_CONFIG_RMII);
|
||
|
break;
|
||
|
case PHY_INTERFACE_MODE_SGMII:
|
||
|
if (!(ret & SGMII_ABILITY)) {
|
||
|
pr_err("%s: sgmii mode not supported\n",
|
||
|
phydev->drv->name);
|
||
|
return -EINVAL;
|
||
|
}
|
||
|
phy_write_mmd(phydev, MDIO_MMD_VEND1, VEND1_MII_BASIC_CONFIG,
|
||
|
MII_BASIC_CONFIG_SGMII);
|
||
|
break;
|
||
|
case PHY_INTERFACE_MODE_INTERNAL:
|
||
|
break;
|
||
|
default:
|
||
|
return -EINVAL;
|
||
|
}
|
||
|
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static int nxp_c45_config(struct phy_device *phydev)
|
||
|
{
|
||
|
int ret;
|
||
|
|
||
|
ret = nxp_c45_soft_reset(phydev);
|
||
|
if (ret)
|
||
|
return ret;
|
||
|
|
||
|
ret = nxp_c45_config_enable(phydev);
|
||
|
if (ret) {
|
||
|
pr_err("%s: Failed to enable config\n", phydev->drv->name);
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
phy_write_mmd(phydev, MDIO_MMD_VEND1, VEND1_PHY_CONFIG,
|
||
|
PHY_CONFIG_AUTO);
|
||
|
|
||
|
ret = nxp_c45_set_phy_mode(phydev);
|
||
|
if (ret) {
|
||
|
pr_err("%s: Failed to set phy mode\n", phydev->drv->name);
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
phydev->autoneg = AUTONEG_DISABLE;
|
||
|
|
||
|
return nxp_c45_start_op(phydev);
|
||
|
}
|
||
|
|
||
|
static int nxp_c45_startup(struct phy_device *phydev)
|
||
|
{
|
||
|
u32 reg;
|
||
|
|
||
|
reg = phy_read_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_STAT1);
|
||
|
phydev->link = !!(reg & MDIO_STAT1_LSTATUS);
|
||
|
phydev->speed = SPEED_100;
|
||
|
phydev->duplex = DUPLEX_FULL;
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static int nxp_c45_probe(struct phy_device *phydev)
|
||
|
{
|
||
|
struct nxp_c45_phy *priv;
|
||
|
|
||
|
priv = devm_kzalloc(phydev->priv, sizeof(*priv), GFP_KERNEL);
|
||
|
if (!priv)
|
||
|
return -ENOMEM;
|
||
|
|
||
|
phydev->priv = priv;
|
||
|
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static struct phy_driver nxp_tja11xx = {
|
||
|
.name = "NXP C45 TJA1103",
|
||
|
.uid = PHY_ID_TJA_1103,
|
||
|
.mask = 0xfffff0,
|
||
|
.features = PHY_100BT1_FEATURES,
|
||
|
.probe = &nxp_c45_probe,
|
||
|
.config = &nxp_c45_config,
|
||
|
.startup = &nxp_c45_startup,
|
||
|
.shutdown = &genphy_shutdown,
|
||
|
};
|
||
|
|
||
|
int phy_nxp_tja11xx_init(void)
|
||
|
{
|
||
|
phy_register(&nxp_tja11xx);
|
||
|
return 0;
|
||
|
}
|