u-boot/board/freescale/mx6ul_14x14_evk/MAINTAINERS

MX6ULEVK BOARD
M:	Peng Fan <Peng.Fan@freescale.com>
S:	Maintained
F:	board/freescale/mx6ul_14x14_evk/
F:	include/configs/mx6ul_14x14_evk.h
F:	configs/mx6ul_14x14_evk_defconfig
imx: mx6ul_14x14_evk add basic board support 1. Add USDHC, I2C, UART, 74LV, USB, QSPI support. 2. Support SPL 3. CONFIG_MX6UL_14X14_EVK_EMMC_REWORK is introduced, this board default supports sd for usdhc2, but can do hardware rework to make usdhc2 support emmc. Boot Log: U-Boot SPL 2015.07-rc3-00124-g35d727b (Jul 20 2015 - 18:40:59) reading u-boot.img reading u-boot.img U-Boot 2015.07-rc3-00124-g35d727b (Jul 20 2015 - 18:40:59 +0800) CPU: Freescale i.MX6UL rev1.0 792 MHz (running at 396 MHz) CPU: Commercial temperature grade (0C to 95C)CPU: Thermal invalid data, fuse: 0x0 - invalid sensor device Reset cause: POR Board: MX6UL 14x14 EVK I2C: ready DRAM: 512 MiB MMC: FSL_SDHC: 0, FSL_SDHC: 1 *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial Net: CPU Net Initialization Failed No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Peng Fan <Peng.Fan@freescale.com> 2015-07-20 11:28:35 +00:00			`MX6ULEVK BOARD`
			`M: Peng Fan <Peng.Fan@freescale.com>`
			`S: Maintained`
			`F: board/freescale/mx6ul_14x14_evk/`
			`F: include/configs/mx6ul_14x14_evk.h`
			`F: configs/mx6ul_14x14_evk_defconfig`