u-boot/board/xilinx/microblaze-generic/xparameters.h

/* SPDX-License-Identifier: GPL-2.0+ */
/*
 * (C) Copyright 2007 Michal Simek
 *
 * Michal  SIMEK <monstr@monstr.eu>
 *
 * CAUTION: This file is a faked configuration !!!
 *          There is no real target for the microblaze-generic
 *          configuration. You have to replace this file with
 *          the generated file from your Xilinx design flow.
 */

#define XILINX_BOARD_NAME	microblaze-generic

/* Microblaze is microblaze_0 */
#define XILINX_FSL_NUMBER	3

/* GPIO is LEDs_4Bit*/
#define XILINX_GPIO_BASEADDR	0x40000000

/* Flash Memory is FLASH_2Mx32 */
#define XILINX_FLASH_START	0x2c000000
#define XILINX_FLASH_SIZE	0x00800000

/* Watchdog IP is wxi_timebase_wdt_0 */
#define XILINX_WATCHDOG_BASEADDR	0x50000000
#define XILINX_WATCHDOG_IRQ		1
SPDX: Convert all of our single license tags to Linux Kernel style When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com> 2018-05-06 21:58:06 +00:00			`/* SPDX-License-Identifier: GPL-2.0+ */`
PATCH: Resolve GPL license problem 2007-03-26 22:32:16 +00:00			`/*`
			`* (C) Copyright 2007 Michal Simek`
			`*`
			`* Michal SIMEK <monstr@monstr.eu>`
			`*`
microblaze: Add faked LL_TEMAC driver configuration Expand the specific configuration for the microblaze-generic board in xparameters.h with a faked setup to enable the LL_TEMAC driver. Note: From now the microblaze-generic board is no longer a valid board configuration for a real piece of hardware. Rather than, we use the file config.mk and xparameters.h as a faked board configuration to force the compilation of all potential driver code for Microblaze systems. Signed-off-by: Stephan Linz <linz@li-pro.net> 2012-02-25 00:48:33 +00:00			`* CAUTION: This file is a faked configuration !!!`
			`* There is no real target for the microblaze-generic`
			`* configuration. You have to replace this file with`
			`* the generated file from your Xilinx design flow.`
PATCH: Resolve GPL license problem 2007-03-26 22:32:16 +00:00			`*/`
Support for XUPV2P board Reset support BSP autoconfig support 2007-03-25 23:39:07 +00:00
microblaze: Change microblaze-generic config file Signed-off-by: Michal Simek <monstr@monstr.eu> 2008-12-19 12:25:55 +00:00			`#define XILINX_BOARD_NAME microblaze-generic`

new: FSL and MSR support #2 2007-05-05 16:54:42 +00:00			`/* Microblaze is microblaze_0 */`
new: add writing to msr register 2007-05-07 15:11:09 +00:00			`#define XILINX_FSL_NUMBER 3`
new: FSL and MSR support #2 2007-05-05 16:54:42 +00:00
new: add writing to msr register 2007-05-07 15:11:09 +00:00			`/* GPIO is LEDs_4Bit*/`
			`#define XILINX_GPIO_BASEADDR 0x40000000`
Support for XUPV2P board Reset support BSP autoconfig support 2007-03-25 23:39:07 +00:00
new: add writing to msr register 2007-05-07 15:11:09 +00:00			`/* Flash Memory is FLASH_2Mx32 */`
Change ML401 parameters - Xilinx BSP 2007-04-21 18:53:31 +00:00			`#define XILINX_FLASH_START 0x2c000000`
Support for XUPV2P board Reset support BSP autoconfig support 2007-03-25 23:39:07 +00:00			`#define XILINX_FLASH_SIZE 0x00800000`

watchdog: Add support for Xilinx Microblaze watchdog Watchdog can be used on Microblaze, PPC and Zynq hw designs. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Tom Rini <trini@ti.com> 2013-04-22 09:23:16 +00:00			`/* Watchdog IP is wxi_timebase_wdt_0 */`
			`#define XILINX_WATCHDOG_BASEADDR 0x50000000`
			`#define XILINX_WATCHDOG_IRQ 1`