Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-11-19 11:18:28 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/board/toradex/colibri_imx7/imximage.cfg

150 lines
3.3 KiB
INI
Raw Normal View History

SPDX: Convert all of our single license tags to Linux Kernel style When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-06 21:58:06 +00:00
/* SPDX-License-Identifier: GPL-2.0+ */
colibri_imx7: add Colibri iMX7S/iMX7D module support This commit adds support for the Toradex Computer on Modules Colibri iMX7S/iMX7D. The two modules/SoC's are very similar hence can be easily supported by one board. The board code detects RAM size at runtime which is one of the differences between the two boards. The board also uses the UART's in DTE mode, hence making use of the new DTE support via serial DM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
2016-07-21 04:27:49 +00:00
/*
* Copyright (C) 2015 Freescale Semiconductor, Inc.
* 2015 Toradex AG
*
imx: s/docs\/README.imximage/doc\/README.imximage/g Fixed typo for doc/README.imximage on respective imximage.cfg files. Cc: Tom Rini <trini@konsulko.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Acked-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2016-10-08 12:30:14 +00:00
* Refer doc/README.imximage for more details about how-to configure
colibri_imx7: add Colibri iMX7S/iMX7D module support This commit adds support for the Toradex Computer on Modules Colibri iMX7S/iMX7D. The two modules/SoC's are very similar hence can be easily supported by one board. The board code detects RAM size at runtime which is one of the differences between the two boards. The board also uses the UART's in DTE mode, hence making use of the new DTE support via serial DM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
2016-07-21 04:27:49 +00:00
* and create imximage boot image
*
* The syntax is taken as close as possible with the kwbimage
*/
#define __ASSEMBLY__
#include <config.h>
/* image version */
IMAGE_VERSION 2
/*
* Boot Device : sd
*/
BOOT_FROM sd
/*
* Secure boot support
*/
#ifdef CONFIG_SECURE_BOOT
CSF CONFIG_CSF_SIZE
#endif
/*
* Device Configuration Data (DCD)
*
* Each entry must have the format:
* Addr-type Address Value
*
* where:
* Addr-type register length (1,2 or 4 bytes)
* Address absolute address of the register
* value value to be stored in the register
*/
/* IOMUXC_GPR_GPR1 */
DATA 4 0x30340004 0x4F400005
/* DDR3L */
/* assuming MEMC_FREQ_RATIO = 2 */
/* SRC_DDRC_RCR */
DATA 4 0x30391000 0x00000002
/* DDRC_MSTR */
DATA 4 0x307a0000 0x01040001
/* DDRC_DFIUPD0 */
DATA 4 0x307a01a0 0x80400003
/* DDRC_DFIUPD1 */
DATA 4 0x307a01a4 0x00100020
/* DDRC_DFIUPD2 */
DATA 4 0x307a01a8 0x80100004
/* DDRC_RFSHTMG */
colibri_imx7: improve DDR3 timing This makes sure that all Colibri iMX7 modules work with the same timing. The changes are: - Disable ODT on read (JEDEC standard JESD79-3F says in chapter 5.2.3 ODT during Reads: "As the DDR3 SDRAM can not terminate and drive at the same time, RTT must be disabled at least half a clock cycle..." and also MX7D SABRESD is disabling it) This alone fixed memory issues for two Colibri iMX7 1GB modules which showed issues before - Make sure tRFC(min) is at least 260ns - Make sure tRC is >50.625ns - tRP needs to be >13.125ns, we can lower from 18.75ns to 15ns - tFAW is not relevant, leave at reset Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2018-06-26 09:10:52 +00:00
DATA 4 0x307a0064 0x00400046
colibri_imx7: add Colibri iMX7S/iMX7D module support This commit adds support for the Toradex Computer on Modules Colibri iMX7S/iMX7D. The two modules/SoC's are very similar hence can be easily supported by one board. The board code detects RAM size at runtime which is one of the differences between the two boards. The board also uses the UART's in DTE mode, hence making use of the new DTE support via serial DM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
2016-07-21 04:27:49 +00:00
/* DDRC_MP_PCTRL_0 */
DATA 4 0x307a0490 0x00000001
/* DDRC_INIT0 */
DATA 4 0x307a00d0 0x00020083
/* DDRC_INIT1 */
DATA 4 0x307a00d4 0x00690000
/* DDRC_INIT3 MR0/MR1 */
DATA 4 0x307a00dc 0x09300004
/* DDRC_INIT4 MR2/MR3 */
DATA 4 0x307a00e0 0x04480000
/* DDRC_INIT5 */
DATA 4 0x307a00e4 0x00100004
/* DDRC_RANKCTL */
DATA 4 0x307a00f4 0x0000033f
/* DDRC_DRAMTMG0 */
colibri_imx7: improve DDR3 timing This makes sure that all Colibri iMX7 modules work with the same timing. The changes are: - Disable ODT on read (JEDEC standard JESD79-3F says in chapter 5.2.3 ODT during Reads: "As the DDR3 SDRAM can not terminate and drive at the same time, RTT must be disabled at least half a clock cycle..." and also MX7D SABRESD is disabling it) This alone fixed memory issues for two Colibri iMX7 1GB modules which showed issues before - Make sure tRFC(min) is at least 260ns - Make sure tRC is >50.625ns - tRP needs to be >13.125ns, we can lower from 18.75ns to 15ns - tFAW is not relevant, leave at reset Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2018-06-26 09:10:52 +00:00
DATA 4 0x307a0100 0x0910090a
colibri_imx7: add Colibri iMX7S/iMX7D module support This commit adds support for the Toradex Computer on Modules Colibri iMX7S/iMX7D. The two modules/SoC's are very similar hence can be easily supported by one board. The board code detects RAM size at runtime which is one of the differences between the two boards. The board also uses the UART's in DTE mode, hence making use of the new DTE support via serial DM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
2016-07-21 04:27:49 +00:00
/* DDRC_DRAMTMG1 */
colibri_imx7: improve DDR3 timing This makes sure that all Colibri iMX7 modules work with the same timing. The changes are: - Disable ODT on read (JEDEC standard JESD79-3F says in chapter 5.2.3 ODT during Reads: "As the DDR3 SDRAM can not terminate and drive at the same time, RTT must be disabled at least half a clock cycle..." and also MX7D SABRESD is disabling it) This alone fixed memory issues for two Colibri iMX7 1GB modules which showed issues before - Make sure tRFC(min) is at least 260ns - Make sure tRC is >50.625ns - tRP needs to be >13.125ns, we can lower from 18.75ns to 15ns - tFAW is not relevant, leave at reset Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2018-06-26 09:10:52 +00:00
DATA 4 0x307a0104 0x000d020e
colibri_imx7: add Colibri iMX7S/iMX7D module support This commit adds support for the Toradex Computer on Modules Colibri iMX7S/iMX7D. The two modules/SoC's are very similar hence can be easily supported by one board. The board code detects RAM size at runtime which is one of the differences between the two boards. The board also uses the UART's in DTE mode, hence making use of the new DTE support via serial DM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
2016-07-21 04:27:49 +00:00
/* DDRC_DRAMTMG2 */
DATA 4 0x307a0108 0x03040307
/* DDRC_DRAMTMG3 */
DATA 4 0x307a010c 0x00002006
/* DDRC_DRAMTMG4 */
colibri_imx7: improve DDR3 timing This makes sure that all Colibri iMX7 modules work with the same timing. The changes are: - Disable ODT on read (JEDEC standard JESD79-3F says in chapter 5.2.3 ODT during Reads: "As the DDR3 SDRAM can not terminate and drive at the same time, RTT must be disabled at least half a clock cycle..." and also MX7D SABRESD is disabling it) This alone fixed memory issues for two Colibri iMX7 1GB modules which showed issues before - Make sure tRFC(min) is at least 260ns - Make sure tRC is >50.625ns - tRP needs to be >13.125ns, we can lower from 18.75ns to 15ns - tFAW is not relevant, leave at reset Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2018-06-26 09:10:52 +00:00
DATA 4 0x307a0110 0x04020204
colibri_imx7: add Colibri iMX7S/iMX7D module support This commit adds support for the Toradex Computer on Modules Colibri iMX7S/iMX7D. The two modules/SoC's are very similar hence can be easily supported by one board. The board code detects RAM size at runtime which is one of the differences between the two boards. The board also uses the UART's in DTE mode, hence making use of the new DTE support via serial DM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
2016-07-21 04:27:49 +00:00
/* DDRC_DRAMTMG5 */
DATA 4 0x307a0114 0x03030202
/* DDRC_DRAMTMG8 */
DATA 4 0x307a0120 0x00000803
/* DDRC_ZQCTL0 */
DATA 4 0x307a0180 0x00800020
/* DDRC_ZQCTL1 */
DATA 4 0x307a0184 0x02001000
/* DDRC_DFITMG0 */
DATA 4 0x307a0190 0x02098204
/* DDRC_DFITMG1 */
DATA 4 0x307a0194 0x00030303
/* DDRC_ADDRMAP0 */
DATA 4 0x307a0200 0x0000001f
/* DDRC_ADDRMAP1 */
DATA 4 0x307a0204 0x00080808
/* DDRC_ADDRMAP5 */
DATA 4 0x307a0214 0x07070707
/* DDRC_ADDRMAP6 */
DATA 4 0x307a0218 0x07070707
/* DDRC_ODTCFG */
DATA 4 0x307a0240 0x06000601
/* DDRC_ODTMAP */
colibri_imx7: improve DDR3 timing This makes sure that all Colibri iMX7 modules work with the same timing. The changes are: - Disable ODT on read (JEDEC standard JESD79-3F says in chapter 5.2.3 ODT during Reads: "As the DDR3 SDRAM can not terminate and drive at the same time, RTT must be disabled at least half a clock cycle..." and also MX7D SABRESD is disabling it) This alone fixed memory issues for two Colibri iMX7 1GB modules which showed issues before - Make sure tRFC(min) is at least 260ns - Make sure tRC is >50.625ns - tRP needs to be >13.125ns, we can lower from 18.75ns to 15ns - tFAW is not relevant, leave at reset Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2018-06-26 09:10:52 +00:00
DATA 4 0x307a0244 0x00000001
colibri_imx7: add Colibri iMX7S/iMX7D module support This commit adds support for the Toradex Computer on Modules Colibri iMX7S/iMX7D. The two modules/SoC's are very similar hence can be easily supported by one board. The board code detects RAM size at runtime which is one of the differences between the two boards. The board also uses the UART's in DTE mode, hence making use of the new DTE support via serial DM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
2016-07-21 04:27:49 +00:00
/* SRC_DDRC_RCR */
DATA 4 0x30391000 0x00000000
/* DDR_PHY_PHY_CON0 */
DATA 4 0x30790000 0x17420f40
/* DDR_PHY_PHY_CON1 */
DATA 4 0x30790004 0x10210100
/* DDR_PHY_PHY_CON4 */
DATA 4 0x30790010 0x00060807
/* DDR_PHY_MDLL_CON0 */
DATA 4 0x307900b0 0x1010007e
/* DDR_PHY_DRVDS_CON0 */
DATA 4 0x3079009c 0x00000d6e
/* DDR_PHY_OFFSET_RD_CON0 */
DATA 4 0x30790020 0x08080808
/* DDR_PHY_OFFSET_WR_CON0 */
DATA 4 0x30790030 0x08080808
/* DDR_PHY_CMD_SDLL_CON0 */
DATA 4 0x30790050 0x01000010
DATA 4 0x30790050 0x00000010
/* DDR_PHY_ZQ_CON0 */
DATA 4 0x307900c0 0x0e407304
DATA 4 0x307900c0 0x0e447304
DATA 4 0x307900c0 0x0e447306
/* DDR_PHY_ZQ_CON1 */
CHECK_BITS_SET 4 0x307900c4 0x1
/* DDR_PHY_ZQ_CON0 */
DATA 4 0x307900c0 0x0e447304
DATA 4 0x307900c0 0x0e407304
/* CCM_CCGRn */
DATA 4 0x30384130 0x00000000
/* IOMUXC_GPR_GPR8 */
DATA 4 0x30340020 0x00000178
/* CCM_CCGRn */
DATA 4 0x30384130 0x00000002
/* DDR_PHY_LP_CON0 */
DATA 4 0x30790018 0x0000000f
/* DDRC_STAT */
CHECK_BITS_SET 4 0x307a0004 0x1
Reference in a new issue Copy permalink