Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-11-28 15:41:40 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/configs/stm32mp15_basic_defconfig

190 lines
5 KiB
Text
Raw Normal View History

board: st: add generic board for STM32MP1 family Add first support for STM32MP157C-ED1 board with "Basic" boot chain 1/ Boot Rom: load SPL with STM32 image header in SYSRAM 2/ SPL: power up and initialize the DDR and load U-Boot image from SDCARD in DDR 3/ U-Boot: search and load extlinux.conf in SDCARD (DISTRO activated) Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2018-03-12 09:46:18 +00:00
CONFIG_ARM=y
CONFIG_ARCH_STM32MP=y
config: stm32mp15: Enable STMFX support Activate PINCTRL_STMFX and needed part for generic pincontrol PINCTRL_FULL, PINCONF. Increase pre-reloc memory for MALLOC (needed for each DM pinconfig node). Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2019-03-11 10:13:16 +00:00
CONFIG_SYS_MALLOC_F_LEN=0x3000
board: stm32mp1: move CONFIG_ENV_XXX in defconfig Move CONFIG_ENV_SECT_SIZE and CONFIG_ENV_OFFSET in stm32mp15_*_defconfig for ST board with NOR support (STM32MP15xx-EV1 boards) - CONFIG_SECT_SIZE values = the max supported NOR erase size (256KB) - CONFIG_ENV_OFFSET = offset for NOR (ENV_IS_IN_SPI_FLASH) This Patch prepares the U-Boot support of boards with STM32MP15x SOC not provided by STMicroelectronics. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-01-13 14:17:41 +00:00
CONFIG_ENV_OFFSET=0x280000
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2020-04-28 20:15:47 +00:00
CONFIG_ENV_SECT_SIZE=0x40000
spi: Enable missing CONFIG_SPL_DM_SPI support Due to how the Makefile logic is we currently get DM_SPI support in SPL enabled by having DM_SPI enabled for full U-Boot but not having CONFIG_SPL_DM_SPI set. Add this missing option to boards that were inadvertently making use of it. Cc: Adam Ford <aford173@gmail.com> Cc: Akash Gajjar <akash@openedev.com> Cc: Anatolij Gustschin <agust@denx.de> Cc: Andy Yan <andy.yan@rock-chips.com> Cc: Anup Patel <anup.patel@wdc.com> Cc: Atish Patra <atish.patra@wdc.com> Cc: Bin Meng <bmeng.cn@gmail.com> Cc: Chee Hong Ang <chee.hong.ang@intel.com> Cc: Chin-Liang See <clsee@altera.com> Cc: Dalon Westergreen <dwesterg@gmail.com> Cc: Dinh Nguyen <dinguyen@kernel.org> Cc: Eugen Hristev <eugen.hristev@microchip.com> Cc: Hannes Schmelzer <hannes.schmelzer@br-automation.com> Cc: Heiko Schocher <hs@denx.de> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Klaus Goger <klaus.goger@theobroma-systems.com> Cc: Levin Du <djw@t-chip.com.cn> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Lokesh Vutla <lokeshvutla@ti.com> Cc: Luca Ceresoli <luca@lucaceresoli.net> Cc: Marek Vasut <marex@denx.de> Cc: Michal Simek <monstr@monstr.eu> Cc: Mike Looijmans <mike.looijmans@topic.nl> Cc: Nicolas Ferre <nicolas.ferre@microchip.com> Cc: Nikita Kiryanov <nikita@compulab.co.il> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Pavel Machek <pavel@denx.de> Cc: Peter Robinson <pbrobinson@gmail.com> Cc: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Cc: Simon Glass <sjg@chromium.org> Cc: Stefan Roese <sr@denx.de> Cc: Suniel Mahesh <sunil@amarulasolutions.com> Cc: Vitaly Andrianov <vitalya@ti.com> Cc: Wolfgang Grandegger <wg@aries-embedded.de> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Luca Ceresoli <luca@lucaceresoli.net>
2020-06-16 23:06:29 +00:00
CONFIG_SPL_DM_SPI=y
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2021-06-28 14:17:29 +00:00
CONFIG_DEFAULT_DEVICE_TREE="stm32mp157c-ev1"
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2020-07-06 17:54:25 +00:00
CONFIG_SPL_TEXT_BASE=0x2FFC2500
mmc: Rename MMC_SUPPORT to MMC Rename these options so that CONFIG_IS_ENABLED can be used with them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com> [trini: Fixup some incorrect renames] Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-08 18:20:09 +00:00
CONFIG_SPL_MMC=y
board: st: add generic board for STM32MP1 family Add first support for STM32MP157C-ED1 board with "Basic" boot chain 1/ Boot Rom: load SPL with STM32 image header in SYSRAM 2/ SPL: power up and initialize the DDR and load U-Boot image from SDCARD in DDR 3/ U-Boot: search and load extlinux.conf in SDCARD (DISTRO activated) Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2018-03-12 09:46:18 +00:00
CONFIG_SPL=y
arm: stm32mp: add sub config Kconfig.15x Add sub Kconfig for each SOC in the STM32 CPU family. It is a preliminary step to introduce a new SOC in the STM32MP family. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2022-05-20 16:24:44 +00:00
CONFIG_CMD_STM32KEY=y
arm: stm32mp: add choice for STM32MP SOC family Add mandatory choice for SOC support in ARCH_STM32MP. This patch is a preliminary step for new SOC introduction in STM32MP family. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2022-05-20 16:24:43 +00:00
CONFIG_TYPEC_STUSB160X=y
arm: stm32mp: add support of STM32MP13x Introduce the code in mach-stm32mp and the configuration file stm32mp13_defconfig for the new STM32MP family. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2022-05-20 16:24:46 +00:00
CONFIG_TARGET_ST_STM32MP15x=y
arm: stm32mp: add choice for STM32MP SOC family Add mandatory choice for SOC support in ARCH_STM32MP. This patch is a preliminary step for new SOC introduction in STM32MP family. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2022-05-20 16:24:43 +00:00
CONFIG_ENV_OFFSET_REDUND=0x2C0000
stm32mp: add the command stm32prog Add a specific command stm32prog for STM32MP soc family witch allows to program the boot devices with the tool STM32CubeProgrammer (http://www.st.com/STM32CubeProg). This command uses the same UART STM32 protocol than MCU STM32 with or USB with DFU protocol v1.1 (ithe MCU ST extension are no supported). The executed actions are based on a tab separated value file with a stm32 header, the FlashLayout file (https://wiki.st.com/stm32mpu/wiki/STM32CubeProgrammer_flashlayout). This file is parsed by the U-Boot command to: - initialize the devices - create the partition table on each device - initialize the DFU backend to access to not volatile memory (NOR/NAND/SD/eMMC) or to virtual device (OTP/PMIC) Up to STM32PROG_MAX_DEV (5) devices can be updated with a FlashLayout. The communication between U-Boot and STM32CubeProgrammer is done with the specific alternate configuration (see "AN5275: USB DFU/USART protocols used in STM32MP1 Series bootloaders" for details). The command stm32prog is executed when a boot from USB is detected (selected with bootpins) and we can program the boot devices with a simple command (on Windows or Linux): PC $> STM32_Programmer_CLI -c port=usb1 -w flaslayout.tsv 1/ the ROM code loads TF-A in embedded RAM (DFU or uart) 2/ TF-A loads flashlayout file and U-Boot in DDR (DFU or uart) 3/ U-Boot executes the stm32prog command (DFU or uart) Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-03-18 08:24:49 +00:00
CONFIG_CMD_STM32PROG=y
stm32mp1: add SPI flash support in SPL Allow boot from NOR with basic boot. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-07-11 09:25:54 +00:00
CONFIG_SPL_SPI_FLASH_SUPPORT=y
spi: Rename SPI_SUPPORT to SPI Rename these options so that CONFIG_IS_ENABLED can be used with them. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-08-08 18:20:14 +00:00
CONFIG_SPL_SPI=y
stm32mp1: configs: deactivate ARMV7_VIRT for basic boot for the moment basic and trusted configuration must start CPU in Supervisor mode and not in Hypervisor Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-07-30 17:16:24 +00:00
# CONFIG_ARMV7_VIRT is not set
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-08 17:36:51 +00:00
CONFIG_SYS_LOAD_ADDR=0xc2000000
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-01 14:33:18 +00:00
CONFIG_SYS_MEMTEST_START=0xc0000000
CONFIG_SYS_MEMTEST_END=0xc4000000
board: st: add generic board for STM32MP1 family Add first support for STM32MP157C-ED1 board with "Basic" boot chain 1/ Boot Rom: load SPL with STM32 image header in SYSRAM 2/ SPL: power up and initialize the DDR and load U-Boot image from SDCARD in DDR 3/ U-Boot: search and load extlinux.conf in SDCARD (DISTRO activated) Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2018-03-12 09:46:18 +00:00
CONFIG_DISTRO_DEFAULTS=y
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-05-25 16:16:03 +00:00
CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xc0100000
stm32mp1: activated some configuration Add configuration useful for test - FIT support - MEMTEST - DFU - CACHE - TIME - TIMER Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-02-27 16:01:22 +00:00
CONFIG_FIT=y
configs: stm32mp15: move bootdelay configuration in defconfig The STM32MP15 boards have no reason to configure bootdelay in stm32mp1.h as it is already done with CONFIG_BOOTDELAY (default = 2) and in include/env_default.h. This patch allows configuration for customers which reuse stm32mp1.h and reduce the size of the default environment. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2021-03-01 18:40:56 +00:00
CONFIG_BOOTDELAY=1
stm32mp1: update bootcmd Clearly separate bootcmd for stm32mp1 board (bootcmd_stm32mp) and preboot management. That solve issue for fastboot continue command. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-02-27 16:01:18 +00:00
CONFIG_BOOTCOMMAND="run bootcmd_stm32mp"
configs: stm32mp15: enable LOG features Activate the logging features in SPL and U-Boot (CONFIG_LOG and CONFIG_SPL_LOG) and the command 'log' with CONFIG_CMD_LOG. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-11-06 18:02:01 +00:00
CONFIG_SPL_LOG=y
board: st: stpmic1: add function stpmic1_init Add a function stmpic_init to early initialize the PMIC STPMIC1 - keep vdd on during the reset cycle (to avoid issue when backup battery is absent) - Check if debug is enabled to program PMIC according to the bit This patch allows to remove the compilation of spl.c file from stm32mp1 board in dh_stm32mp1. CONFIG_SPL_BOARD_INIT is removed as the new function is called earlier in SPL, in the function board_early_init_f. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-05-25 10:19:46 +00:00
CONFIG_BOARD_EARLY_INIT_F=y
Convert CONFIG_SPL_BSS_MAX_SIZE et al to Kconfig This converts the following to Kconfig: CONFIG_SPL_BSS_MAX_SIZE CONFIG_SPL_MAX_FOOTPRINT Note that the da850evm platforms were violating the "only use one" rule here, and so now hard-code their BSS limit. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-05-19 19:09:22 +00:00
CONFIG_SPL_FOOTPRINT_LIMIT=y
CONFIG_SPL_MAX_FOOTPRINT=0x3db00
Convert CONFIG_SPL_STACK to Kconfig This converts the following to Kconfig: CONFIG_SPL_STACK Signed-off-by: Tom Rini <trini@konsulko.com>
2022-05-26 17:13:21 +00:00
# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
CONFIG_SPL_STACK=0x30000000
Convert CONFIG_SYS_SPL_MALLOC_SIZE et al to Kconfig This converts the following to Kconfig: CONFIG_SYS_SPL_MALLOC_SIZE CONFIG_SYS_SPL_MALLOC_START We introduce a default value here as well, and CONFIG_SYS_SPL_MALLOC to control if we have a malloc pool or not. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-05-27 16:48:32 +00:00
CONFIG_SYS_SPL_MALLOC=y
CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y
CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0xc0300000
CONFIG_SYS_SPL_MALLOC_SIZE=0x1d00000
board: st: add generic board for STM32MP1 family Add first support for STM32MP157C-ED1 board with "Basic" boot chain 1/ Boot Rom: load SPL with STM32 image header in SYSRAM 2/ SPL: power up and initialize the DDR and load U-Boot image from SDCARD in DDR 3/ U-Boot: search and load extlinux.conf in SDCARD (DISTRO activated) Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2018-03-12 09:46:18 +00:00
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION=y
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION=3
configs:stm32mp1: activate env config in SPL Activate env config in SPL with CONFIG_SPL_ENV_SUPPORT and use CONFIG_IS_ENABLED macro to test the activated CONFIG_$(SPL_)ENV_IS_IN_... in env_get_location. Reviewed-by: Patrice Chotard <patrice.chotard@st.com> Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-06-15 09:18:24 +00:00
CONFIG_SPL_ENV_SUPPORT=y
i2c: Rename SPL/TPL_I2C_SUPPORT to I2C Rename these options so that CONFIG_IS_ENABLED can be used with them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Heiko Schocher <hs@denx.de>
2021-07-11 03:14:36 +00:00
CONFIG_SPL_I2C=y
stm32mp1: add SPI flash support in SPL Allow boot from NOR with basic boot. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-07-11 09:25:54 +00:00
CONFIG_SPL_MTD_SUPPORT=y
Merge branch 'next' Merge all outstanding changes from the current next branch in now that we have released.
2020-07-06 19:46:38 +00:00
CONFIG_SPL_DM_SPI_FLASH=y
Rename SPL_POWER_SUPPORT to SPL_POWER Rename this option so that CONFIG_IS_ENABLED can be used with it. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2021-07-11 03:14:24 +00:00
CONFIG_SPL_POWER=y
Merge branch 'next' Merge all outstanding changes from the current next branch in now that we have released.
2020-07-06 19:46:38 +00:00
CONFIG_SPL_SPI_FLASH_MTD=y
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-10 19:08:46 +00:00
CONFIG_SYS_SPI_U_BOOT_OFFS=0x80000
board: stm32mp1: enable simple framebuffer node for splashscreen Enable an existing simple framebuffer node in the Linux kernel device tree and the add the associated reserved memory node to preserved the resources (clock, memory) used by the stm32 video driver to display the splashscreen = background in exlinux.conf file. These resources will be released by the Linux driver only when the associated driver is ready to avoid transition issues during the Linux kernel initialization between U-Boot splash screen and the final display. See Linux documentation for details: Documentation/devicetree/bindings/display/simple-framebuffer.yaml Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2021-11-15 15:32:23 +00:00
CONFIG_FDT_SIMPLEFB=y
board: st: add generic board for STM32MP1 family Add first support for STM32MP157C-ED1 board with "Basic" boot chain 1/ Boot Rom: load SPL with STM32 image header in SYSRAM 2/ SPL: power up and initialize the DDR and load U-Boot image from SDCARD in DDR 3/ U-Boot: search and load extlinux.conf in SDCARD (DISTRO activated) Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2018-03-12 09:46:18 +00:00
CONFIG_SYS_PROMPT="STM32MP> "
Convert CONFIG_SYS_PBSIZE to Kconfig This converts the following to Kconfig: CONFIG_SYS_PBSIZE Signed-off-by: Tom Rini <trini@konsulko.com>
2022-05-11 21:38:09 +00:00
CONFIG_SYS_PBSIZE=1050
configs: stm32mp15: activate CMD_ADTIMG Activate the support of the command adtimg to handle android images. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-07-06 13:00:46 +00:00
CONFIG_CMD_ADTIMG=y
stm32mp1: configs: activate CMD_ERASEENV Activate the command env erase to reset the environment with the command: > env erase it is simpler than: > env default -a > env save Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-06-15 09:25:13 +00:00
CONFIG_CMD_ERASEENV=y
configs: stm32mp1: enable uefi related commands The board can boot with UEFI. With the latest changes in U-Boot's EFI subsystem we also have support for EFI runtime variables, without SetVariable support. We can also store the EFI variables in a file on the ESP partition and preserve them across reboots. The env and efidebug commands are missing in order to configure EFI variables and the efibootmgr though. Since U-Boot's default config enables other EFI related commands (e.g bootefi), let's add the env related and efidebug commands and allow users to do that Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2021-02-26 12:52:51 +00:00
CONFIG_CMD_NVEDIT_EFI=y
board: st: add generic board for STM32MP1 family Add first support for STM32MP157C-ED1 board with "Basic" boot chain 1/ Boot Rom: load SPL with STM32 image header in SYSRAM 2/ SPL: power up and initialize the DDR and load U-Boot image from SDCARD in DDR 3/ U-Boot: search and load extlinux.conf in SDCARD (DISTRO activated) Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2018-03-12 09:46:18 +00:00
CONFIG_CMD_MEMINFO=y
stm32mp1: activated some configuration Add configuration useful for test - FIT support - MEMTEST - DFU - CACHE - TIME - TIMER Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-02-27 16:01:22 +00:00
CONFIG_CMD_MEMTEST=y
configs: stm32mp: Enable UNZIP on STMicroelectronics stm32mp15 boards The CMD_UNZIP provides the 'gzwrite' command, which is convenient for writing e.g. gz-compressed images to eMMC from U-Boot. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2021-05-06 07:31:00 +00:00
CONFIG_CMD_UNZIP=y
configs: stm32mp15: enable ADC Enable ADC on stm32mp15. - CONFIG_CMD_ADC - CONFIG_STM32_ADC Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-07-24 14:31:32 +00:00
CONFIG_CMD_ADC=y
clk: stm32mp1: add debug information Add support of clk dump command and display information during probe (under CONFIG_DISPLAY_CPUINFO). Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-01-30 12:07:04 +00:00
CONFIG_CMD_CLK=y
stm32mp1: activated some configuration Add configuration useful for test - FIT support - MEMTEST - DFU - CACHE - TIME - TIMER Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-02-27 16:01:22 +00:00
CONFIG_CMD_DFU=y
stm32mp1: add FUSE command support Add support of fuse command (read/write/program/sense) on bank 0 to access to BSEC SAFMEM (4096 OTP bits). Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-05-17 13:24:06 +00:00
CONFIG_CMD_FUSE=y
board: st: add generic board for STM32MP1 family Add first support for STM32MP157C-ED1 board with "Basic" boot chain 1/ Boot Rom: load SPL with STM32 image header in SYSRAM 2/ SPL: power up and initialize the DDR and load U-Boot image from SDCARD in DDR 3/ U-Boot: search and load extlinux.conf in SDCARD (DISTRO activated) Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2018-03-12 09:46:18 +00:00
CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
stm32mp1: Add remoteproc support for m4 coprocessor Alignment with kernel patch proposal for binding: [PATCH v4 0/8] stm32 m4 remoteproc on STM32MP157c https://lkml.org/lkml/2019/5/14/159 Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-08-02 13:07:18 +00:00
CONFIG_CMD_REMOTEPROC=y
configs: stm32mp15: Enable SPI relative flags Enable STM32_SPI, SPI, DM_SPI and CMD_SPI flags. This enables the SPI support for STM32MP15. Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2019-05-13 09:02:08 +00:00
CONFIG_CMD_SPI=y
configs: stm32mp15: Enable USB relative flags Enable config USB relative flags in order to enable USB EHCI, DWC2 gadget, download and mass_storage support. Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-08-10 15:12:13 +00:00
CONFIG_CMD_USB=y
CONFIG_CMD_USB_MASS_STORAGE=y
stm32mp1: configs: add CONFIG_CMD_BMP Activate command BMP for splash screen support Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-07-30 17:16:32 +00:00
CONFIG_CMD_BMP=y
stm32mp1: activated some configuration Add configuration useful for test - FIT support - MEMTEST - DFU - CACHE - TIME - TIMER Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-02-27 16:01:22 +00:00
CONFIG_CMD_CACHE=y
configs: stm32mp1: enable uefi related commands The board can boot with UEFI. With the latest changes in U-Boot's EFI subsystem we also have support for EFI runtime variables, without SetVariable support. We can also store the EFI variables in a file on the ESP partition and preserve them across reboots. The env and efidebug commands are missing in order to configure EFI variables and the efibootmgr though. Since U-Boot's default config enables other EFI related commands (e.g bootefi), let's add the env related and efidebug commands and allow users to do that Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2021-02-26 12:52:51 +00:00
CONFIG_CMD_EFIDEBUG=y
stm32mp1: activated some configuration Add configuration useful for test - FIT support - MEMTEST - DFU - CACHE - TIME - TIMER Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-02-27 16:01:22 +00:00
CONFIG_CMD_TIME=y
configs: stm32mp1: activate command rng Activate the command rng with CONFIG_CMD_RNG, used to test the rng driver Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2021-06-29 10:08:27 +00:00
CONFIG_CMD_RNG=y
stm32mp1: activated some configuration Add configuration useful for test - FIT support - MEMTEST - DFU - CACHE - TIME - TIMER Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-02-27 16:01:22 +00:00
CONFIG_CMD_TIMER=y
board: st: add generic board for STM32MP1 family Add first support for STM32MP157C-ED1 board with "Basic" boot chain 1/ Boot Rom: load SPL with STM32 image header in SYSRAM 2/ SPL: power up and initialize the DDR and load U-Boot image from SDCARD in DDR 3/ U-Boot: search and load extlinux.conf in SDCARD (DISTRO activated) Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2018-03-12 09:46:18 +00:00
CONFIG_CMD_PMIC=y
configs: stm32mp15_basic: Set regulator relative flags Enable DM_REGULATOR_STPMU1 flag to activate regulator driver for STM32MP15 SoC and CMD_REGULATOR flag to be able to set/get regulator state int U-boot command line. Disable PMIC_CHILDREN as this flag is not needed in SPL for STM32MP1. Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-04-26 15:13:12 +00:00
CONFIG_CMD_REGULATOR=y
board: st: add generic board for STM32MP1 family Add first support for STM32MP157C-ED1 board with "Basic" boot chain 1/ Boot Rom: load SPL with STM32 image header in SYSRAM 2/ SPL: power up and initialize the DDR and load U-Boot image from SDCARD in DDR 3/ U-Boot: search and load extlinux.conf in SDCARD (DISTRO activated) Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2018-03-12 09:46:18 +00:00
CONFIG_CMD_EXT4_WRITE=y
stm32mp1: activate NAND and NOR support on EV1 Add the necessary configuration to have NAND and NOR support on ev1 board for BASIC boot (with SPL) or for TRUSTED boot (with TF-A). STM32MP> nand info Device 0: nand0, sector size 256 KiB Page size 4096 b OOB size 224 b Erase size 262144 b subpagesize 4096 b options 0x00184200 bbt options 0x00060000 STM32MP> sf probe SF: Detected mx66l51235l with page size 256 Bytes, erase size 64 KiB, total 64 MiB Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-04-08 13:30:52 +00:00
CONFIG_CMD_MTDPARTS=y
configs: stm32mp15: enable LOG features Activate the logging features in SPL and U-Boot (CONFIG_LOG and CONFIG_SPL_LOG) and the command 'log' with CONFIG_CMD_LOG. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-11-06 18:02:01 +00:00
CONFIG_CMD_LOG=y
configs: stm32mp15: Enable ENV_IS_IN_UBI Add all relative flags needed by ENV_IS_IN_UBI Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2019-05-07 16:39:22 +00:00
CONFIG_CMD_UBI=y
board: st: add generic board for STM32MP1 family Add first support for STM32MP157C-ED1 board with "Basic" boot chain 1/ Boot Rom: load SPL with STM32 image header in SYSRAM 2/ SPL: power up and initialize the DDR and load U-Boot image from SDCARD in DDR 3/ U-Boot: search and load extlinux.conf in SDCARD (DISTRO activated) Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2018-03-12 09:46:18 +00:00
# CONFIG_SPL_DOS_PARTITION is not set
configs: stm32mp1: activate OF_LIVE for DT live support Activate the live DT to reduce the DT parsing time. For example the boot time is reduced by 200ms on STM32MP157C-EV1 board for stm32mp15_basic_defconfig (boot with SPL) or stm32mp15_trusted_defconfig (boot with TF-A). Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2020-12-11 14:32:30 +00:00
CONFIG_OF_LIVE=y
stm32mp1: configs: Add CONFIG_OF_SPL_REMOVE_PROPS Removes unused device tree property in SPL to reduce the SPL size by 1kB Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-07-05 15:20:20 +00:00
CONFIG_OF_SPL_REMOVE_PROPS="interrupts interrupt-names interrupts-extended interrupt-controller \\\#interrupt-cells interrupt-parent dmas dma-names assigned-clocks assigned-clock-rates assigned-clock-parents hwlocks"
configs: stm32mp15: Enable ENV_IS_IN_EXT4 and all relative flags Enable ENV_IS_IN_EXT4 and all relative flags to be able to load/save environment in EXT4 partition. This will allows to load/save environment on both sdcard and eMMC. As for stm32mp15, bootfs has not the same partition number on sdcard and on eMMC, we use "auto" key which allows to find the first partition in device with bootable flag which is partition 4 on sdcard and partition 2 on eMMC. Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2019-02-15 17:04:08 +00:00
CONFIG_ENV_IS_NOWHERE=y
stm32mp1: use a specific SD/eMMC partition for U-Boot enviromnent Save the environment at the end of the U-Boot partition, the GPT partition named "ssbl" in SD card or eMMC and avoid requirements on the "bootfs" file system generated via specific raw tools (like wic and genimage). With the previous configuration of the U-Boot environment saved in ext4 file, U-Boot need to create/modify the file uenv.txt in the ext4 file system; so this EXT4 file system need to be generated without some functionality, like metadata_csum and dir_index, because they are not supported by U-Boot. Reviewed-by: Patrice Chotard <patrice.chotard@st.com> Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-06-15 09:18:23 +00:00
CONFIG_ENV_IS_IN_MMC=y
configs: stm32mp15: Enable ENV_IS_SPI_FLASH Add all relative flags needed by ENV_IS_IN_SPI_FLASH Reserved a 256KB partition in NOR to save the U-Boot environment. Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2019-01-24 10:33:29 +00:00
CONFIG_ENV_IS_IN_SPI_FLASH=y
configs: stm32mp15: Enable ENV_IS_IN_UBI Add all relative flags needed by ENV_IS_IN_UBI Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2019-05-07 16:39:22 +00:00
CONFIG_ENV_IS_IN_UBI=y
defconfigs: Migrate CONFIG_SYS_REDUNDAND_ENVIRONMENT Move this symbol to Kconfig. As part of this we can drop a UBI-specific symbol that was a stop-gap for not having this particular symbol in Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
2019-11-10 16:28:03 +00:00
CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
configs: stm32mp15: Enable ENV_IS_IN_UBI Add all relative flags needed by ENV_IS_IN_UBI Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2019-05-07 16:39:22 +00:00
CONFIG_ENV_UBI_PART="UBI"
CONFIG_ENV_UBI_VOLUME="uboot_config"
env: ubi: KConfig: add CONFIG_ENV_UBI_VOLUME_REDUND Introduce the KConfig option CONFIG_ENV_UBI_VOLUME_REDUND for defining the name of the UBI volume used to store the redundant environment. Signed-off-by: Markus Klotzbuecher <markus.klotzbuecher@kistler.com> Reviewed-by: Heiko Schocher <hs@denx.de> Cc: Kyungmin Park <kmpark@infradead.org> hs: get rid of stm32mp1* build errors
2019-05-15 13:15:53 +00:00
CONFIG_ENV_UBI_VOLUME_REDUND="uboot_config_r"
env: Add CONFIG_SYS_RELOC_GD_ENV_ADDR symbol Today in initr_reloc_global_data() we use some non-obvious tests to determine if we need to relocate the env_addr within gd or not. In order to facilitate migration of other symbols to Kconfig we need to introduce a new symbol for this particular use case. Cc: Wolfgang Denk <wd@denx.de> Cc: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2019-11-13 03:46:36 +00:00
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
board: stm32mp1: use CONFIG_SYS_MMC_ENV_DEV when available Check whether user has explicitly defined the mmc device to use in mmc_get_env_dev() with CONFIG_SYS_MMC_ENV_DEV. On STMicroelectronics boards the used mmc device for environment is the instance of boot device provided by the ROM code; the mmc instance is configured by alias in device tree. The used partition is defined in device tree with u-boot,mmc-env-partition = "ssbl". This patch allows to override this selection for the support of customer boards without alias; for example when SDMMC1 is not used and ENV in mmc0=SDMMC2, user can force the value: CONFIG_SYS_MMC_ENV_DEV = 0. On STMicroelectronics boards, the current behavior is kept with CONFIG_SYS_MMC_ENV_DEV = -1. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2021-03-01 12:17:56 +00:00
CONFIG_SYS_MMC_ENV_DEV=-1
configs:stm32mp1: activate env config in SPL Activate env config in SPL with CONFIG_SPL_ENV_SUPPORT and use CONFIG_IS_ENABLED macro to test the activated CONFIG_$(SPL_)ENV_IS_IN_... in env_get_location. Reviewed-by: Patrice Chotard <patrice.chotard@st.com> Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-06-15 09:18:24 +00:00
# CONFIG_SPL_ENV_IS_NOWHERE is not set
# CONFIG_SPL_ENV_IS_IN_SPI_FLASH is not set
ARM: stm32: Use CONFIG_TFTP_TSIZE on STMicroelectronics boards Long TFTP transfers lead to a wall of # characters on UART, which in the end may slow down the transfer itself. Use CONFIG_TFTP_TSIZE to print progress in fewer # characters. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
2022-05-05 12:21:32 +00:00
CONFIG_TFTP_TSIZE=y
configs: stm32mp15: enable ADC Enable ADC on stm32mp15. - CONFIG_CMD_ADC - CONFIG_STM32_ADC Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-07-24 14:31:32 +00:00
CONFIG_STM32_ADC=y
configs: migrate CONFIG_SET_DFU_ALT_INFO to defconfigs Move CONFIG_SET_DFU_ALT_INFO into Kconfig done by moveconfig.py. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Acked-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2020-02-26 09:28:41 +00:00
CONFIG_SET_DFU_ALT_INFO=y
stm32mp1: activate FASTBOOT on eMMC activate Fastboot for eMMC on EV1 board (mmc1) $> sudo apt-get install android-tools-adb android-tools-fastboot $> fastboot -i 0x0483 getvar bootloader-version Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-02-27 16:01:19 +00:00
CONFIG_USB_FUNCTION_FASTBOOT=y
CONFIG_FASTBOOT_BUF_ADDR=0xC0000000
CONFIG_FASTBOOT_BUF_SIZE=0x02000000
CONFIG_FASTBOOT_USB_DEV=1
CONFIG_FASTBOOT_FLASH=y
CONFIG_FASTBOOT_FLASH_MMC_DEV=1
configs: stm32mp1: enable fastboot support of eMMC boot partition Activate fastboot support on boot partition for eMMC, mmc1 device on STMicroelectronics board (EV1). Signed-off-by: Jean-Philippe ROMAIN <jean-philippe.romain@st.com> Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-09-09 13:24:32 +00:00
CONFIG_FASTBOOT_MMC_BOOT_SUPPORT=y
CONFIG_FASTBOOT_MMC_BOOT1_NAME="mmc1boot0"
CONFIG_FASTBOOT_MMC_BOOT2_NAME="mmc1boot1"
CONFIG_FASTBOOT_MMC_USER_SUPPORT=y
CONFIG_FASTBOOT_MMC_USER_NAME="mmc1"
configs: stm32mp1: enable the fastboot oem command format Enable the fastboot oem command format and set the variable "partitions" with default eMMC partitions list. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Signed-off-by: Jean-Philippe ROMAIN <jean-philippe.romain@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-09-09 13:24:33 +00:00
CONFIG_FASTBOOT_CMD_OEM_FORMAT=y
configs: stm32mp1: enable the fastboot oem command partconf Enable the fastboot oem command partconf, used to select the correct eMMC boot partition, with same format than 'mmc partconf' with parameter: boot_ack boot_partition On stm32mp1 family: - boot_ack = 1 (Boot Acknowledge is needed by ROM code) - boot_partition = 1 or 2 (Boot partition 1 / 2 enabled for boot) So on EV1 board the expected commands to select boot partition 1 or 2 $> fastboot oem partconf:1 1 $> fastboot oem partconf:1 2 Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-09-09 13:24:34 +00:00
CONFIG_FASTBOOT_CMD_OEM_PARTCONF=y
configs: stm32mp1: enable the fastboot oem command bootbus Enable the fastboot oem command bootbus, used to configure the eMMC boot behavior, with same format than 'mmc bootbus' and with parameter: boot_bus_width reset_boot_bus_width boot_mode On stm32mp1 boards the expected command is $> fastboot oem partconf:0 0 0 Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-09-09 13:24:35 +00:00
CONFIG_FASTBOOT_CMD_OEM_BOOTBUS=y
configs: stm32mp1: activate CONFIG_GPIO_HOG This patch activates the new configuration CONFIG_GPIO_HOG. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-06-04 12:30:23 +00:00
CONFIG_GPIO_HOG=y
hwspinlock: add stm32 hardware spinlock support Implement hardware spinlock support for STM32MP1. Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2018-11-27 12:49:52 +00:00
CONFIG_DM_HWSPINLOCK=y
CONFIG_HWSPINLOCK_STM32=y
board: st: add generic board for STM32MP1 family Add first support for STM32MP157C-ED1 board with "Basic" boot chain 1/ Boot Rom: load SPL with STM32 image header in SYSRAM 2/ SPL: power up and initialize the DDR and load U-Boot image from SDCARD in DDR 3/ U-Boot: search and load extlinux.conf in SDCARD (DISTRO activated) Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2018-03-12 09:46:18 +00:00
CONFIG_DM_I2C=y
CONFIG_SYS_I2C_STM32F7=y
stm32mp1: add gpio led support This patch add the 4 LED available on the ED1 board and activated gpio led driver. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2018-07-27 14:37:05 +00:00
CONFIG_LED=y
CONFIG_LED_GPIO=y
configs: stm32mp: add CONFIG_STM32_FMC2_EBI This patch enables the support of FMC2 EBI. Signed-off-by: Christophe Kerello <christophe.kerello@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-07-31 07:53:43 +00:00
CONFIG_STM32_FMC2_EBI=y
Convert CONFIG_SUPPORT_EMMC_BOOT to Kconfig This converts the following to Kconfig: CONFIG_SUPPORT_EMMC_BOOT As requested by Michal Simek <michal.simek@xilinx.com>, these boards have no eMMC so CONFIG_SUPPORT_EMMC_BOOT has not been migrated: xilinx_zynqmp_zc1275_revB xilinx_zynqmp_zc1751_xm018_dc4 xilinx_zynqmp_zc1751_xm019_dc5 xilinx_zynqmp_zcu100_revC xilinx_zynqmp_zcu102_rev1_0 xilinx_zynqmp_zcu102_revA xilinx_zynqmp_zcu102_revB xilinx_zynqmp_zcu104_revA xilinx_zynqmp_zcu104_revC xilinx_zynqmp_zcu106_revA xilinx_zynqmp_zcu111_revA Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com> Acked-by: Lukasz Majewski <lukma@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@st.com> Acked-by: Ramon Fried <ramon.fried@gmail.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
2019-05-01 07:58:27 +00:00
CONFIG_SUPPORT_EMMC_BOOT=y
board: st: add generic board for STM32MP1 family Add first support for STM32MP157C-ED1 board with "Basic" boot chain 1/ Boot Rom: load SPL with STM32 image header in SYSRAM 2/ SPL: power up and initialize the DDR and load U-Boot image from SDCARD in DDR 3/ U-Boot: search and load extlinux.conf in SDCARD (DISTRO activated) Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2018-03-12 09:46:18 +00:00
CONFIG_STM32_SDMMC2=y
mtd: ensure MTD/the raw NAND core are compiled when there is a NAND flash Both symbols must be enabled when there is a raw NAND driver selected. Also enable them when CONFIG_CMD_NAND is selected to avoid breaking things when we'll further rework the MTD dependency description. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com> [trini: Rebase and migrate a few more boards here] Signed-off-by: Tom Rini <trini@konsulko.com>
2019-10-03 17:50:07 +00:00
CONFIG_MTD=y
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2019-12-04 22:18:38 +00:00
CONFIG_DM_MTD=y
configs: migrate CONFIG_SYS_MTDPARTS_RUNTIME to defconfigs Move CONFIG_SYS_MTDPARTS_RUNTIME into Kconfig done by moveconfig.py. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-02-26 09:28:42 +00:00
CONFIG_SYS_MTDPARTS_RUNTIME=y
mtd: rename CONFIG_NAND -> CONFIG_MTD_RAW_NAND Add more clarity by changing the Kconfig entry name. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> [trini: Re-run migration, update a few more cases] Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>
2019-10-03 17:50:03 +00:00
CONFIG_MTD_RAW_NAND=y
stm32mp1: activate NAND and NOR support on EV1 Add the necessary configuration to have NAND and NOR support on ev1 board for BASIC boot (with SPL) or for TRUSTED boot (with TF-A). STM32MP> nand info Device 0: nand0, sector size 256 KiB Page size 4096 b OOB size 224 b Erase size 262144 b subpagesize 4096 b options 0x00184200 bbt options 0x00060000 STM32MP> sf probe SF: Detected mx66l51235l with page size 256 Bytes, erase size 64 KiB, total 64 MiB Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-04-08 13:30:52 +00:00
CONFIG_NAND_STM32_FMC2=y
Convert CONFIG_SYS_NAND_ONFI_DETECTION to Kconfig This converts the following to Kconfig: CONFIG_SYS_NAND_ONFI_DETECTION Signed-off-by: Tom Rini <trini@konsulko.com>
2021-09-22 18:50:34 +00:00
CONFIG_SYS_NAND_ONFI_DETECTION=y
stm32mp1: configs: activate CONFIG_MTD_SPI_NAND Activate the support of SPI NAND in stm32mp1 U-Boot. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2019-10-14 07:28:10 +00:00
CONFIG_MTD_SPI_NAND=y
stm32mp1: activate NAND and NOR support on EV1 Add the necessary configuration to have NAND and NOR support on ev1 board for BASIC boot (with SPL) or for TRUSTED boot (with TF-A). STM32MP> nand info Device 0: nand0, sector size 256 KiB Page size 4096 b OOB size 224 b Erase size 262144 b subpagesize 4096 b options 0x00184200 bbt options 0x00060000 STM32MP> sf probe SF: Detected mx66l51235l with page size 256 Bytes, erase size 64 KiB, total 64 MiB Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-04-08 13:30:52 +00:00
CONFIG_DM_SPI_FLASH=y
CONFIG_SPI_FLASH_MACRONIX=y
CONFIG_SPI_FLASH_SPANSION=y
CONFIG_SPI_FLASH_STMICRO=y
CONFIG_SPI_FLASH_WINBOND=y
# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
CONFIG_SPI_FLASH_MTD=y
configs: stm32mp1: activate Ethernet PHY Realtek Need Realtek driver to manage in RTL8211F the configuration of the LED. Initialize LCR (LED Control Register) to configure green LED for Link, yellow LED for Active Reviewed-by: Patrice Chotard <patrice.chotard@st.com> Signed-off-by: Christophe Roullier <christophe.roullier@st.com> Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-04-22 12:29:19 +00:00
CONFIG_PHY_REALTEK=y
configs: stm32mp15: Enable Ethernet feature This allows to enable Ethernet and use driver for Synopsys Ethernet QoS device Signed-off-by: Christophe Roullier <christophe.roullier@st.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-05-17 13:08:47 +00:00
CONFIG_DM_ETH=y
CONFIG_DWC_ETH_QOS=y
configs: stm32mp15: Enable USB relative flags Enable config USB relative flags in order to enable USB EHCI, DWC2 gadget, download and mass_storage support. Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-08-10 15:12:13 +00:00
CONFIG_PHY=y
CONFIG_PHY_STM32_USBPHYC=y
config: stm32mp15: Enable STMFX support Activate PINCTRL_STMFX and needed part for generic pincontrol PINCTRL_FULL, PINCONF. Increase pre-reloc memory for MALLOC (needed for each DM pinconfig node). Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2019-03-11 10:13:16 +00:00
CONFIG_PINCONF=y
board: st: add generic board for STM32MP1 family Add first support for STM32MP157C-ED1 board with "Basic" boot chain 1/ Boot Rom: load SPL with STM32 image header in SYSRAM 2/ SPL: power up and initialize the DDR and load U-Boot image from SDCARD in DDR 3/ U-Boot: search and load extlinux.conf in SDCARD (DISTRO activated) Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2018-03-12 09:46:18 +00:00
# CONFIG_SPL_PINCTRL_FULL is not set
config: stm32mp15: Enable STMFX support Activate PINCTRL_STMFX and needed part for generic pincontrol PINCTRL_FULL, PINCONF. Increase pre-reloc memory for MALLOC (needed for each DM pinconfig node). Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2019-03-11 10:13:16 +00:00
CONFIG_PINCTRL_STMFX=y
board: st: add generic board for STM32MP1 family Add first support for STM32MP157C-ED1 board with "Basic" boot chain 1/ Boot Rom: load SPL with STM32 image header in SYSRAM 2/ SPL: power up and initialize the DDR and load U-Boot image from SDCARD in DDR 3/ U-Boot: search and load extlinux.conf in SDCARD (DISTRO activated) Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2018-03-12 09:46:18 +00:00
CONFIG_DM_PMIC=y
configs: stm32mp15_basic: Set regulator relative flags Enable DM_REGULATOR_STPMU1 flag to activate regulator driver for STM32MP15 SoC and CMD_REGULATOR flag to be able to set/get regulator state int U-boot command line. Disable PMIC_CHILDREN as this flag is not needed in SPL for STM32MP1. Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-04-26 15:13:12 +00:00
# CONFIG_SPL_PMIC_CHILDREN is not set
power: rename stpmu1 to official name stpmic1 Alignment with kernel driver name & binding introduced by https://patchwork.kernel.org/cover/10761943/ to use the final marketing name = STPMIC1. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Lukasz Majewski <lukma@denx.de>
2019-02-04 10:26:17 +00:00
CONFIG_PMIC_STPMIC1=y
cmd: Kconfig: Change dependency for CMD_ADC CMD_ADC selected DM_REGULATOR unconditionally without enabling DM. That's why change select to depends on to cover it. Kconfig is showing this issue as: WARNING: unmet direct dependencies detected for REGMAP Depends on [n]: DM [=n] Selected by [y]: - DM_REGULATOR_PBIAS [=y] && DM_REGULATOR [=y] Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Tom Rini <trini@konsulko.com> [trini: Update CMD_ADC=y configs to enable DM_REGULATOR now] Signed-off-by: Tom Rini <trini@konsulko.com>
2020-08-19 08:44:17 +00:00
CONFIG_DM_REGULATOR=y
stm32mp1: activate FIXED regulator Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2018-07-09 13:17:23 +00:00
CONFIG_DM_REGULATOR_FIXED=y
configs: stm32mp15_basic: Set regulator relative flags Enable DM_REGULATOR_STPMU1 flag to activate regulator driver for STM32MP15 SoC and CMD_REGULATOR flag to be able to set/get regulator state int U-boot command line. Disable PMIC_CHILDREN as this flag is not needed in SPL for STM32MP1. Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-04-26 15:13:12 +00:00
CONFIG_DM_REGULATOR_GPIO=y
configs: stm32mp15: Enable STM32_VREFBUF flag Enable vrefbuf on stm32mp15, to be used by ADC. Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-04-26 15:00:48 +00:00
CONFIG_DM_REGULATOR_STM32_VREFBUF=y
power: rename stpmu1 to official name stpmic1 Alignment with kernel driver name & binding introduced by https://patchwork.kernel.org/cover/10761943/ to use the final marketing name = STPMIC1. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Lukasz Majewski <lukma@denx.de>
2019-02-04 10:26:17 +00:00
CONFIG_DM_REGULATOR_STPMIC1=y
configs: stm32mp15: enable stm32 remoteproc Activate the remote processor support for stm32mp15 configs. Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com>
2019-07-22 09:04:31 +00:00
CONFIG_REMOTEPROC_STM32_COPRO=y
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2020-01-22 18:38:00 +00:00
CONFIG_DM_RNG=y
CONFIG_RNG_STM32MP1=y
rtc: Add rtc driver for stm32mp1 Add support of STM32MP1 rtc driver. Enable it for basic and trusted configurations. Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com>
2019-07-22 09:02:34 +00:00
CONFIG_DM_RTC=y
CONFIG_RTC_STM32=y
stm32mp1: activate serial rx buffer Activate the serial rx buffer. Prepare console MUX activation with vidconsole, and avoid console performance issue (missing character for copy-paste). Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2018-08-03 11:38:42 +00:00
CONFIG_SERIAL_RX_BUFFER=y
stm32mp1: activate NAND and NOR support on EV1 Add the necessary configuration to have NAND and NOR support on ev1 board for BASIC boot (with SPL) or for TRUSTED boot (with TF-A). STM32MP> nand info Device 0: nand0, sector size 256 KiB Page size 4096 b OOB size 224 b Erase size 262144 b subpagesize 4096 b options 0x00184200 bbt options 0x00060000 STM32MP> sf probe SF: Detected mx66l51235l with page size 256 Bytes, erase size 64 KiB, total 64 MiB Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-04-08 13:30:52 +00:00
CONFIG_SPI=y
CONFIG_DM_SPI=y
CONFIG_STM32_QSPI=y
configs: stm32mp15: Enable SPI relative flags Enable STM32_SPI, SPI, DM_SPI and CMD_SPI flags. This enables the SPI support for STM32MP15. Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2019-05-13 09:02:08 +00:00
CONFIG_STM32_SPI=y
stm32mp15: remove configs dependency on CONFIG_TFABOOT Remove the dependency on CONFIG_TFABOOT in stm32mp Kconfig - always activate the ARCH config: CONFIG_ARCH_SUPPORT_PSCI and CONFIG_CPU_V7_HAS_NONSEC - CONFIG_ARMV7_NONSEC is deactivated in trusted defconfig - the correct sysreset driver is activated in each defconfig: CONFIG_SYSRESET_PSCI or SYSRESET_SYSCON Reported-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2021-10-11 07:52:49 +00:00
CONFIG_SYSRESET_SYSCON=y
configs: stm32mp15: Enable USB relative flags Enable config USB relative flags in order to enable USB EHCI, DWC2 gadget, download and mass_storage support. Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-08-10 15:12:13 +00:00
CONFIG_USB=y
stm32mp1: migrate USBOTG device to driver model Use the DWC2 device driver with DM_USB_GADGET support and cleanup the USB support in STM32MP1 board. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-03-29 14:42:23 +00:00
CONFIG_DM_USB_GADGET=y
configs: stm32mp15: Enable USB relative flags Enable config USB relative flags in order to enable USB EHCI, DWC2 gadget, download and mass_storage support. Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-08-10 15:12:13 +00:00
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_GENERIC=y
CONFIG_USB_GADGET=y
CONFIG_USB_GADGET_MANUFACTURER="STMicroelectronics"
CONFIG_USB_GADGET_VENDOR_NUM=0x0483
CONFIG_USB_GADGET_PRODUCT_NUM=0x5720
CONFIG_USB_GADGET_DWC2_OTG=y
stm32mp1: configs: add CONFIG_DM_VIDEO Activate command DM_VIDEO for LCD support Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-07-30 17:16:30 +00:00
CONFIG_DM_VIDEO=y
stm32mp1: configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Acked-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-12-18 09:12:59 +00:00
CONFIG_BACKLIGHT_GPIO=y
stm32mp1: configs: add display devices Add support of panels otm8009A, RM68200 & DSI controller. Limit resolution to 1280x800. Signed-off-by: Yannick Fertré <yannick.fertre@st.com>
2019-10-07 13:29:15 +00:00
CONFIG_VIDEO_LCD_ORISETECH_OTM8009A=y
CONFIG_VIDEO_LCD_RAYDIUM_RM68200=y
CONFIG_VIDEO_STM32=y
CONFIG_VIDEO_STM32_DSI=y
CONFIG_VIDEO_STM32_MAX_XRES=1280
CONFIG_VIDEO_STM32_MAX_YRES=800
configs: migrate CONFIG_BMP_16/24/32BPP to defconfigs Done with: ./tools/moveconfig.py BMP_16BPP BMP_24BPP BMP_32BPP Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-09-28 09:30:16 +00:00
CONFIG_BMP_16BPP=y
CONFIG_BMP_24BPP=y
CONFIG_BMP_32BPP=y
configs: stm32mp1: activate WATCHDOG As kernel v5.6 have a solution since so we will be able to enable the watchdog at boot time. It is reloaded by the watchdog framework (if CONFIG_WATCHDOG_HANDLE_BOOT_ENABLED is set) and until the userspace watchdog daemon takes over control. Need presence of kernel patch 85fdc63fe256 ("drivers: watchdog: stm32_iwdg: set WDOG_HW_RUNNING at probe") integrated in v5.6-rc1. This patch revert the previous commit ca351e705a5c ("stm32mp1: deactivate WATCHDOG in defconfig"). Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-06-11 14:51:17 +00:00
CONFIG_WDT=y
CONFIG_WDT_STM32MP=y
stm32mp: add binman support for STM32MP15x Use binman to add the stm32image header on SPL binary for basic boot or on U-Boot binary when it is required, i.e. for TF-A boot without FIP support, when CONFIG_STM32MP15x_STM32IMAGE is activated. The "binman" tool is the recommended tool for specific image generation. This patch allows to suppress the config.mk file and it is a preliminary step to manage FIT generation with binman. The init_r parsing of U-Boot device tree to search the binman information is not required for STM32MP15, so the binman library can be removed in U-Boot (CONFIG_BINMAN_FDT is deactivated). Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-10-13 13:11:18 +00:00
# CONFIG_BINMAN_FDT is not set
configs: stm32mp1: activate CONFIG_ERRNO_STR Add support of errno_str, used in command pmic and regulator. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-04-22 12:29:20 +00:00
CONFIG_ERRNO_STR=y
stm32mp1: activate OF_BOARD_SETUP and FDT_FIXUP_PARTITIONS Update kernel MTD partition in device tree with U-Boot information. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-07-02 11:26:07 +00:00
CONFIG_FDT_FIXUP_PARTITIONS=y
configs: stm32mp15: increase the number of reserved memory region in lmb For the latest kernel device tree the max number of reserved regions in lmb library is reached: 8 with 5 reserved regions in device tree. When a new region is added, the lmb allocation for the device tree relocation failed and boot with ramdisk failed. This patch avoids this issue by increasing the max number of supported reserved memory in lmb library to 16. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2021-03-10 09:16:32 +00:00
# CONFIG_LMB_USE_MAX_REGIONS is not set
CONFIG_LMB_MEMORY_REGIONS=2
CONFIG_LMB_RESERVED_REGIONS=16
Reference in a new issue Copy permalink