u-boot/board/freescale/ls1046aqds/ls1046aqds_rcw_sd_ifc.cfg

#PBL preamble and RCW header
aa55aa55 01ee0100
# RCW
# Enable IFC; disable QSPI
0c150010 0e000000 00000000 00000000
11335559 40005012 60040000 c1000000
00000000 00000000 00000000 00038800
00000000 01001101 00000096 00000001
armv8: ls1046aqds: Add LS1046AQDS board support LS1046AQDS Specification: ------------------------- Memory subsystem: * 8GByte DDR4 SDRAM (64bit bus) * 128 Mbyte NOR flash single-chip memory * 512 Mbyte NAND flash * 64 Mbyte high-speed SPI flash * SD connector to interface with the SD memory card Ethernet: * Two XFI 10G ports * Two SGMII ports * Two RGMII ports PCIe: supports Gen 1 and Gen 2 SATA 3.0: one SATA 3.0 port USB 3.0: two micro AB connector and one type A connector UART: supports two UARTs up to 115200 bps for console Signed-off-by: Shaohui Xie <Shaohui.Xie@nxp.com> Signed-off-by: Mingkai Hu <mingkai.hu@nxp.com> Signed-off-by: Gong Qianyu <Qianyu.Gong@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com> 2016-09-07 09:56:14 +00:00			`#PBL preamble and RCW header`
			`aa55aa55 01ee0100`
			`# RCW`
			`# Enable IFC; disable QSPI`
			`0c150010 0e000000 00000000 00000000`
			`11335559 40005012 60040000 c1000000`
			`00000000 00000000 00000000 00038800`
			`00000000 01001101 00000096 00000001`