u-boot/arch/arm/mach-rockchip/spl.c

155 lines
3.5 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0+
/*
* (C) Copyright 2019 Rockchip Electronics Co., Ltd
*/
#include <common.h>
#include <debug_uart.h>
#include <dm.h>
#include <hang.h>
#include <image.h>
#include <init.h>
#include <log.h>
#include <ram.h>
#include <spl.h>
#include <asm/arch-rockchip/bootrom.h>
#include <asm/global_data.h>
#include <asm/io.h>
#include <linux/bitops.h>
DECLARE_GLOBAL_DATA_PTR;
int board_return_to_bootrom(struct spl_image_info *spl_image,
struct spl_boot_device *bootdev)
{
back_to_bootrom(BROM_BOOT_NEXTSTAGE);
return 0;
}
__weak const char * const boot_devices[BROM_LAST_BOOTSOURCE + 1] = {
};
const char *board_spl_was_booted_from(void)
{
u32 bootdevice_brom_id = readl(BROM_BOOTSOURCE_ID_ADDR);
const char *bootdevice_ofpath = NULL;
if (bootdevice_brom_id < ARRAY_SIZE(boot_devices))
bootdevice_ofpath = boot_devices[bootdevice_brom_id];
if (bootdevice_ofpath)
debug("%s: brom_bootdevice_id %x maps to '%s'\n",
__func__, bootdevice_brom_id, bootdevice_ofpath);
else
debug("%s: failed to resolve brom_bootdevice_id %x\n",
__func__, bootdevice_brom_id);
return bootdevice_ofpath;
}
u32 spl_boot_device(void)
{
u32 boot_device = BOOT_DEVICE_MMC1;
#if defined(CONFIG_TARGET_CHROMEBOOK_JERRY) || \
defined(CONFIG_TARGET_CHROMEBIT_MICKEY) || \
defined(CONFIG_TARGET_CHROMEBOOK_MINNIE) || \
defined(CONFIG_TARGET_CHROMEBOOK_SPEEDY) || \
rockchip: rk3399: Add support for chromebook_kevin Add support for Kevin, an RK3399-based convertible chromebook that is very similar to Bob. This patch is mostly based on existing support for Bob, with only minor changes for Kevin-specific things. Unlike other Gru boards, coreboot sets Kevin's center logic to 925 mV, so adjust it here in the dts as well. The rk3399-gru-kevin devicetree has an unknown event code reference which has to be defined, set it to the Linux counterpart. The new defconfig is copied from Bob with the diffconfig: DEFAULT_DEVICE_TREE "rk3399-gru-bob" -> "rk3399-gru-kevin" DEFAULT_FDT_FILE "rockchip/rk3399-gru-bob.dtb" -> "rockchip/rk3399-gru-kevin.dtb" VIDEO_ROCKCHIP_MAX_XRES 1280 -> 2400 VIDEO_ROCKCHIP_MAX_YRES 800 -> 1600 +TARGET_CHROMEBOOK_KEVIN y With this Kevin can boot from SPI flash to a usable U-Boot prompt on the display with the keyboard working, but cannot boot into Linux for unknown reasons. eMMC starts in a working state but fails to re-init, microSD card works but at a lower-than-expected speed, USB works but causes a hang on de-init. There are known workarounds to solve eMMC and USB issues. Cc: Marty E. Plummer <hanetzer@startmail.com> Cc: Simon Glass <sjg@chromium.org> [Alper: commit message, resync config with Bob, update MAINTAINERS, add to Rockchip doc, add Kconfig help message, set regulator] Co-developed-by: Alper Nebi Yasak <alpernebiyasak@gmail.com> Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Simon Glass <sjg@chromium.org>
2021-12-24 13:43:46 +00:00
defined(CONFIG_TARGET_CHROMEBOOK_BOB) || \
defined(CONFIG_TARGET_CHROMEBOOK_KEVIN)
return BOOT_DEVICE_SPI;
#endif
if (CONFIG_IS_ENABLED(ROCKCHIP_BACK_TO_BROM))
return BOOT_DEVICE_BOOTROM;
return boot_device;
}
u32 spl_mmc_boot_mode(struct mmc *mmc, const u32 boot_device)
{
return MMCSD_MODE_RAW;
}
#if !defined(CONFIG_ROCKCHIP_RK3188)
#define TIMER_LOAD_COUNT_L 0x00
#define TIMER_LOAD_COUNT_H 0x04
#define TIMER_CONTROL_REG 0x10
#define TIMER_EN 0x1
#define TIMER_FMODE BIT(0)
#define TIMER_RMODE BIT(1)
__weak void rockchip_stimer_init(void)
{
/* If Timer already enabled, don't re-init it */
u32 reg = readl(CONFIG_ROCKCHIP_STIMER_BASE + TIMER_CONTROL_REG);
if (reg & TIMER_EN)
return;
#ifndef CONFIG_ARM64
asm volatile("mcr p15, 0, %0, c14, c0, 0"
: : "r"(COUNTER_FREQUENCY));
#endif
writel(0, CONFIG_ROCKCHIP_STIMER_BASE + TIMER_CONTROL_REG);
writel(0xffffffff, CONFIG_ROCKCHIP_STIMER_BASE);
writel(0xffffffff, CONFIG_ROCKCHIP_STIMER_BASE + 4);
writel(TIMER_EN | TIMER_FMODE, CONFIG_ROCKCHIP_STIMER_BASE +
TIMER_CONTROL_REG);
}
#endif
__weak int board_early_init_f(void)
{
return 0;
}
__weak int arch_cpu_init(void)
{
return 0;
}
void board_init_f(ulong dummy)
{
int ret;
#ifdef CONFIG_DEBUG_UART
/*
* Debug UART can be used from here if required:
*
* debug_uart_init();
* printch('a');
* printhex8(0x1234);
* printascii("string");
*/
debug_uart_init();
debug("\nspl:debug uart enabled in %s\n", __func__);
#endif
board_early_init_f();
ret = spl_early_init();
if (ret) {
printf("spl_early_init() failed: %d\n", ret);
hang();
}
arch_cpu_init();
#if !defined(CONFIG_ROCKCHIP_RK3188)
rockchip_stimer_init();
#endif
#ifdef CONFIG_SYS_ARCH_TIMER
/* Init ARM arch timer in arch/arm/cpu/armv7/arch_timer.c */
timer_init();
#endif
#if !defined(CONFIG_TPL) || defined(CONFIG_SPL_RAM)
debug("\nspl:init dram\n");
ret = dram_init();
if (ret) {
printf("DRAM init failed: %d\n", ret);
return;
}
gd->ram_top = gd->ram_base + get_effective_memsize();
gd->ram_top = board_get_usable_ram_top(gd->ram_size);
#endif
preloader_console_init();
}