2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-12-17 00:33:06 +00:00
u-boot/arch/arm/dts/stm32mp157c-ed1-u-boot.dtsi

227 lines
3.3 KiB
Text
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
/*
* Copyright : STMicroelectronics 2018
*/
#include <dt-bindings/clock/stm32mp1-clksrc.h>
#include "stm32mp15-u-boot.dtsi"
#include "stm32mp15-ddr3-2x4Gb-1066-binG.dtsi"
/ {
aliases {
i2c3 = &i2c4;
};
config {
u-boot,boot-led = "heartbeat";
u-boot,error-led = "error";
u-boot,mmc-env-partition = "fip";
st,fastboot-gpios = <&gpioa 13 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
st,stm32prog-gpios = <&gpioa 14 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
};
#if defined(CONFIG_STM32MP15x_STM32IMAGE) || defined(CONFIG_SPL)
config {
u-boot,mmc-env-partition = "ssbl";
};
#endif
#ifdef CONFIG_STM32MP15x_STM32IMAGE
/* only needed for boot with TF-A, witout FIP support */
firmware {
optee {
compatible = "linaro,optee-tz";
method = "smc";
};
};
reserved-memory {
optee@fe000000 {
reg = <0xfe000000 0x02000000>;
no-map;
};
};
#endif
led {
red {
label = "error";
gpios = <&gpioa 13 GPIO_ACTIVE_LOW>;
default-state = "off";
status = "okay";
};
};
};
&clk_hse {
st,digbypass;
};
&i2c4 {
bootph-all;
};
&i2c4_pins_a {
bootph-all;
pins {
bootph-all;
};
};
&pmic {
bootph-all;
};
&rcc {
st,clksrc = <
CLK_MPU_PLL1P
CLK_AXI_PLL2P
CLK_MCU_PLL3P
CLK_PLL12_HSE
CLK_PLL3_HSE
CLK_PLL4_HSE
CLK_RTC_LSE
CLK_MCO1_DISABLED
CLK_MCO2_DISABLED
>;
st,clkdiv = <
1 /*MPU*/
0 /*AXI*/
0 /*MCU*/
1 /*APB1*/
1 /*APB2*/
1 /*APB3*/
1 /*APB4*/
2 /*APB5*/
23 /*RTC*/
0 /*MCO1*/
0 /*MCO2*/
>;
st,pkcs = <
CLK_CKPER_HSE
CLK_FMC_ACLK
CLK_QSPI_ACLK
CLK_ETH_DISABLED
CLK_SDMMC12_PLL4P
CLK_DSI_DSIPLL
CLK_STGEN_HSE
CLK_USBPHY_HSE
CLK_SPI2S1_PLL3Q
CLK_SPI2S23_PLL3Q
CLK_SPI45_HSI
CLK_SPI6_HSI
CLK_I2C46_HSI
CLK_SDMMC3_PLL4P
CLK_USBO_USBPHY
CLK_ADC_CKPER
CLK_CEC_LSE
CLK_I2C12_HSI
CLK_I2C35_HSI
CLK_UART1_HSI
CLK_UART24_HSI
CLK_UART35_HSI
CLK_UART6_HSI
CLK_UART78_HSI
CLK_SPDIF_PLL4P
CLK_FDCAN_PLL4R
CLK_SAI1_PLL3Q
CLK_SAI2_PLL3Q
CLK_SAI3_PLL3Q
CLK_SAI4_PLL3Q
CLK_RNG1_LSI
CLK_RNG2_LSI
CLK_LPTIM1_PCLK1
CLK_LPTIM23_PCLK3
CLK_LPTIM45_LSE
>;
/* VCO = 1066.0 MHz => P = 266 (AXI), Q = 533 (GPU), R = 533 (DDR) */
pll2: st,pll@1 {
compatible = "st,stm32mp1-pll";
reg = <1>;
cfg = < 2 65 1 0 0 PQR(1,1,1) >;
frac = < 0x1400 >;
bootph-all;
};
/* VCO = 417.8 MHz => P = 209, Q = 24, R = 11 */
pll3: st,pll@2 {
compatible = "st,stm32mp1-pll";
reg = <2>;
cfg = < 1 33 1 16 36 PQR(1,1,1) >;
frac = < 0x1a04 >;
bootph-all;
};
/* VCO = 594.0 MHz => P = 99, Q = 74, R = 74 */
pll4: st,pll@3 {
compatible = "st,stm32mp1-pll";
reg = <3>;
cfg = < 3 98 5 7 7 PQR(1,1,1) >;
bootph-all;
};
};
&sdmmc1 {
bootph-pre-ram;
};
&sdmmc1_b4_pins_a {
bootph-pre-ram;
pins1 {
bootph-pre-ram;
};
pins2 {
bootph-pre-ram;
};
};
&sdmmc1_dir_pins_a {
bootph-pre-ram;
pins1 {
bootph-pre-ram;
};
pins2 {
bootph-pre-ram;
};
};
&sdmmc2 {
bootph-pre-ram;
};
&sdmmc2_b4_pins_a {
bootph-pre-ram;
pins1 {
bootph-pre-ram;
};
pins2 {
bootph-pre-ram;
};
};
&sdmmc2_d47_pins_a {
bootph-pre-ram;
pins {
bootph-pre-ram;
};
};
&uart4 {
bootph-all;
};
&uart4_pins_a {
bootph-all;
pins1 {
bootph-all;
};
pins2 {
bootph-all;
/* pull-up on rx to avoid floating level */
bias-pull-up;
};
};