Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-12-14 15:23:07 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/drivers/usb/dwc3/Kconfig

94 lines
2.6 KiB
Text
Raw Normal View History

usb: gadget: Move CONFIG_USB_GADGET_DUALSPEED to Kconfig Move CONFIG_USB_GADGET_DUALSPEED option to Kconfig and make all UDC controllers select USB_GADGET_DUALSPEED: - add next options to Kconfig selecting USB_GADGET_DUALSPEED: - USB_GADGET_ATMEL_USBA - USB_GADGET_DWC2_OTG - USB_DWC3 - CI_UDC - make USB_MUSB_GADGET select USB_GADGET_DUALSPEED While at it, make some related fixes: - remove DUALSPEED from configs that don't enable gadget support: - kwb.h - tseries.h - add missing USB_GADGET option to next configs: - novena_defconfig - pcm051_rev*_defconfig - xfi3_defconfig Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
2016-04-13 11:20:25 +00:00
config USB_DWC3
bool "DesignWare USB3 DRD Core Support"
usb: Enforce DM_USB migration for USB_HOST devices. As the deadline for migration to DM_USB, when using a USB host controller has now gone two years past the deadline, enforce migration. This is done by: - Ensuring that all host controller options (other than the very legacy old MUSB ones) now select USB_HOST. USB_HOST now enforces DM_USB and OF_CONTROL. - Remove other parts of Kconfig logic that had platforms pick DM_USB. - To keep Kconfig happy, have some select statements test for USB_HOST as well. - Re-order some Kconfig entries and menus so that we can cleanly pick host or gadget roles. For the various HCD options that have platform glue options, group them together and update dependencies in some cases. - As SPL_DM_USB is not required, on platforms that had not yet enabled it, disable it. Cc: Marek Vasut <marex@denx.de> Cc: Icenowy Zheng <icenowy@aosc.io> Cc: Samuel Holland <samuel@sholland.org> Cc: FUKAUMI Naoki <naobsd@gmail.com> Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-09 14:11:56 +00:00
depends on USB_XHCI_HCD || USB_GADGET
usb: gadget: Move CONFIG_USB_GADGET_DUALSPEED to Kconfig Move CONFIG_USB_GADGET_DUALSPEED option to Kconfig and make all UDC controllers select USB_GADGET_DUALSPEED: - add next options to Kconfig selecting USB_GADGET_DUALSPEED: - USB_GADGET_ATMEL_USBA - USB_GADGET_DWC2_OTG - USB_DWC3 - CI_UDC - make USB_MUSB_GADGET select USB_GADGET_DUALSPEED While at it, make some related fixes: - remove DUALSPEED from configs that don't enable gadget support: - kwb.h - tseries.h - add missing USB_GADGET option to next configs: - novena_defconfig - pcm051_rev*_defconfig - xfi3_defconfig Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
2016-04-13 11:20:25 +00:00
help
Say Y here if your system has a Dual Role SuperSpeed
USB controller based on the DesignWare USB3 IP Core.
usb: dwc3: Move CONFIG_USB_DWC3_GADGET/HOST to Kconfig Description was borrowed from kernel dwc3 Kconfig. Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
2016-04-13 11:20:27 +00:00
if USB_DWC3
config USB_DWC3_GADGET
usb: dwc3: Kconfig: get rid of obsolete mode selection The mode selection for the DWC3 is kind of obsolete. The driver does not have to be host only or gadget only. This choice is confusing. All the remaining callers of dwc3_uboot_init() explicitly set dr_mode before calling the function, so none rely on a default behavior. Remove the choice menu and keep only the USB_DWC3_GADGET option. Enable it by default if USB_GADGET and USB_DWC3 are enabled. It must be disabled for the evb-rk3328 as it uses DWC2 for the gadget and DWC3 for the host. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2019-09-11 09:33:53 +00:00
bool "USB Gadget support for DWC3"
default y
usb: dwc3: Move CONFIG_USB_DWC3_GADGET/HOST to Kconfig Description was borrowed from kernel dwc3 Kconfig. Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
2016-04-13 11:20:27 +00:00
depends on USB_GADGET
usb: dwc3: fix Kconfig dependency to accept host driver in drivers/usb/dwc3 We see the choice of USB_DWC3_HOST / _GADGET in drivers/usb/dwc3/Kconfig, but we can not choose USB_DWC3_HOST unless USB_GADGET is defined. This is strange. Loosen the "depends on" and also move "select USB_GADGET_DUALSPEED" to the correct place. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-08-24 16:30:20 +00:00
select USB_GADGET_DUALSPEED
usb: dwc3: Move CONFIG_USB_DWC3_GADGET/HOST to Kconfig Description was borrowed from kernel dwc3 Kconfig. Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
2016-04-13 11:20:27 +00:00
usb: dwc3: Move CONFIG_USB_DWC3_OMAP to Kconfig Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
2016-04-13 11:20:28 +00:00
comment "Platform Glue Driver Support"
config USB_DWC3_OMAP
bool "Texas Instruments OMAP5 and similar Platforms"
help
Some platforms from Texas Instruments like OMAP5, DRA7xxx and
AM437x use this IP for USB2/3 functionality.
Say 'Y' here if you have one such device
usb: dwc3: Add generic DWC3 glue logic driver By enabling BLK by default this is the next driver which needs to get support for DM_USB. Adding generic DWC3 glue logic which only parse nodes and read device mode. Based on it probe proper host/peripheral DWC3 drivers for it. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-05-18 11:15:06 +00:00
config USB_DWC3_GENERIC
dwc3-generic: Handle the PHYs, the clocks and the reset lines This make the driver more generic. At this point this driver can replace the dwc3-of-simple implementation. Make the description in the Kconfig more generic too. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2018-11-29 09:52:48 +00:00
bool "Generic implementation of a DWC3 wrapper (aka dwc3 glue)"
depends on DM_USB && USB_DWC3 && MISC
usb: dwc3: Add generic DWC3 glue logic driver By enabling BLK by default this is the next driver which needs to get support for DM_USB. Adding generic DWC3 glue logic which only parse nodes and read device mode. Based on it probe proper host/peripheral DWC3 drivers for it. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-05-18 11:15:06 +00:00
help
dwc3-generic: Handle the PHYs, the clocks and the reset lines This make the driver more generic. At this point this driver can replace the dwc3-of-simple implementation. Make the description in the Kconfig more generic too. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2018-11-29 09:52:48 +00:00
Select this for Xilinx ZynqMP and similar Platforms.
This wrapper supports Host and Peripheral operation modes.
usb: dwc3: Add generic DWC3 glue logic driver By enabling BLK by default this is the next driver which needs to get support for DM_USB. Adding generic DWC3 glue logic which only parse nodes and read device mode. Based on it probe proper host/peripheral DWC3 drivers for it. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-05-18 11:15:06 +00:00
usb: dwc3: add a SPL_USB_DWC3_GENERIC option for the dwc3 driver Suppress warnings when building the SPL without USB_DWC3_GENERIC Signed-off-by: Angus Ainslie <angus@akkea.ca>
2022-07-14 15:11:11 +00:00
config SPL_USB_DWC3_GENERIC
bool "Generic implementation of a DWC3 wrapper (aka dwc3 glue) for the SPL"
depends on SPL_DM_USB && USB_DWC3 && SPL_MISC
help
Select this for Xilinx ZynqMP and similar Platforms.
This wrapper supports Host and Peripheral operation modes.
usb: dwc3: Add Meson G12A USB Glue Adds support for Amlogic G12A USB Control Glue HW. The Amlogic G12A SoC Family embeds 2 USB Controllers : - a DWC3 IP configured as Host for USB2 and USB3 - a DWC2 IP configured as Peripheral USB2 Only A glue connects these both controllers to 2 USB2 PHYs, and optionnally to an USB3+PCIE Combo PHY shared with the PCIE controller. The Glue configures the UTMI 8bit interfaces for the USB2 PHYs, including routing of the OTG PHY between the DWC3 and DWC2 controllers, and setups the on-chip OTG mode selection for this PHY. This driver sets the OTG capable port as Host mode by default, the switch to Device mode is to be done in a separate patch. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Marek Vasut <marex@denx.de>
2019-02-19 12:42:01 +00:00
config USB_DWC3_MESON_G12A
bool "Amlogic Meson G12A USB wrapper"
depends on DM_USB && USB_DWC3 && ARCH_MESON
usb: dwc3-meson-g12a: Select PHY instead of imply PHY Imply means you can turn off the option and expect things to work - "it's a good idea to have X enabled" is when to use imply - "you must have X for Y to work" is when to use select Use "select" here. Signed-off-by: Marek Vasut <marex@denx.de> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
2023-02-23 16:32:43 +00:00
select PHY
usb: dwc3: Add Meson G12A USB Glue Adds support for Amlogic G12A USB Control Glue HW. The Amlogic G12A SoC Family embeds 2 USB Controllers : - a DWC3 IP configured as Host for USB2 and USB3 - a DWC2 IP configured as Peripheral USB2 Only A glue connects these both controllers to 2 USB2 PHYs, and optionnally to an USB3+PCIE Combo PHY shared with the PCIE controller. The Glue configures the UTMI 8bit interfaces for the USB2 PHYs, including routing of the OTG PHY between the DWC3 and DWC2 controllers, and setups the on-chip OTG mode selection for this PHY. This driver sets the OTG capable port as Host mode by default, the switch to Device mode is to be done in a separate patch. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Marek Vasut <marex@denx.de>
2019-02-19 12:42:01 +00:00
help
Select this for Amlogic Meson G12A Platforms.
This wrapper supports Host and Peripheral operation modes.
usb: dwc3: add Amlogic GXL & GXL DWC3 Glue The USB support was initialy done with a set of PHYs and dwc3-of-simple because the architecture of the USB complex was not understood correctly at the time (and proper documentation was missing...). But with the G12A family, the USB complex was correctly understood and implemented correctly. This adds a proper driver for the glue, based on the G12A one, but with enough changes to require a different driver in U-Boot. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2020-09-10 08:48:13 +00:00
config USB_DWC3_MESON_GXL
bool "Amlogic Meson GXL USB wrapper"
depends on DM_USB && USB_DWC3 && ARCH_MESON
usb: dwc3-meson-g12a: Select PHY instead of imply PHY Imply means you can turn off the option and expect things to work - "it's a good idea to have X enabled" is when to use imply - "you must have X for Y to work" is when to use select Use "select" here. Signed-off-by: Marek Vasut <marex@denx.de> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
2023-02-23 16:32:43 +00:00
select PHY
usb: dwc3: add Amlogic GXL & GXL DWC3 Glue The USB support was initialy done with a set of PHYs and dwc3-of-simple because the architecture of the USB complex was not understood correctly at the time (and proper documentation was missing...). But with the G12A family, the USB complex was correctly understood and implemented correctly. This adds a proper driver for the glue, based on the G12A one, but with enough changes to require a different driver in U-Boot. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2020-09-10 08:48:13 +00:00
help
Select this for Amlogic Meson GXL and GXM Platforms.
This wrapper supports Host and Peripheral operation modes.
usb: dwc3: add UniPhier specific glue layer Add UniPhier platform specific glue layer to support USB3 Host mode on Synopsys DWC3 IP. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Marek Vasut <marex@denx.de>
2017-09-28 13:01:00 +00:00
config USB_DWC3_UNIPHIER
bool "DesignWare USB3 Host Support on UniPhier Platforms"
usb: dwc3-uniphier: Use dwc3-generic instead of xhci-dwc3 dwc3-uniphier depends on xhci-dwc3 framework, however, it is preferable to use dwc3-generic. This driver calls the exported dwc3-generic functions and redefine the SoC-dependent operations to fit dwc3-generic. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Reviewed-by: Marek Vasut <marex@denx.de>
2023-02-20 05:50:33 +00:00
depends on ARCH_UNIPHIER && USB_DWC3
select USB_DWC3_GENERIC
usb: dwc3-uniphier: Select PHY Make sure the PHY subsystem is activated for the uniphier DWC3 glue logic, as it depends on PHY implementation there. Signed-off-by: Marek Vasut <marex@denx.de>
2023-02-23 16:29:24 +00:00
select PHY
usb: dwc3-uniphier: Use dwc3-generic instead of xhci-dwc3 dwc3-uniphier depends on xhci-dwc3 framework, however, it is preferable to use dwc3-generic. This driver calls the exported dwc3-generic functions and redefine the SoC-dependent operations to fit dwc3-generic. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Reviewed-by: Marek Vasut <marex@denx.de>
2023-02-20 05:50:33 +00:00
select PHY_UNIPHIER_USB3
usb: dwc3: add UniPhier specific glue layer Add UniPhier platform specific glue layer to support USB3 Host mode on Synopsys DWC3 IP. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Marek Vasut <marex@denx.de>
2017-09-28 13:01:00 +00:00
help
Support of USB2/3 functionality in Socionext UniPhier platforms.
Say 'Y' here if you have one such device.
usb: dwc3: add layerscape support Add support for the proper dwc3 device tree binding support as specified in the offical device tree spec. Initially, add support for the LS1028A support. Other SoCs should be easy to add by just adding the corresponding compatible string. Unfortunately, the device trees of all other layerscape SoCs are not converted and uses a wrong compatible string only known in u-boot. To maintain backwards compatibility with current u-boot device trees, add the generic "fsl,layerscape-dwc3" compatible string. OTG mode is not supported yet. The dr_mode in the devicetree will either have to be set to peripheral or host. Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-10-15 13:15:23 +00:00
config USB_DWC3_LAYERSCAPE
bool "Freescale Layerscape platform support"
depends on DM_USB && USB_DWC3
depends on !USB_XHCI_FSL
help
Select this for Freescale Layerscape Platforms.
Host and Peripheral operation modes are supported. OTG is not
supported.
usb: dwc3: Move CONFIG_USB_DWC3_PHY_* to Kconfig Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
2016-04-13 11:20:29 +00:00
menu "PHY Subsystem"
config USB_DWC3_PHY_OMAP
bool "TI OMAP SoC series USB DRD PHY driver"
help
Enable single driver for both USB2 PHY programming and USB3 PHY
programming for TI SoCs.
config USB_DWC3_PHY_SAMSUNG
bool "Exynos5 SoC series USB DRD PHY driver"
help
Enable USB DRD PHY support for Exynos 5 SoC series.
This driver provides PHY interface for USB 3.0 DRD controller
present on Exynos5 SoC series.
endmenu
usb: dwc3: Move CONFIG_USB_DWC3_GADGET/HOST to Kconfig Description was borrowed from kernel dwc3 Kconfig. Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
2016-04-13 11:20:27 +00:00
endif
Reference in a new issue Copy permalink