Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-12-29 22:43:10 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/arch/arm/dts/zynqmp-zcu670-revA.dts

670 lines
16 KiB
Text
Raw Normal View History

arm64: zynqmp: Add support for zcu670-revA The board is sharing a lot of components with zcu208 but it contains differet silicon and also several components are done differently. The board has 4GB memory connected to PS and additional 4GB connected to PL. Compare to zcu208 sata support has been dropped and only USB3.0 is using GTR (lane2). Others GTRs are routed to connectors. MIO configuration is also shared with zcu111. The board is using si5381 chip compare to si5341 which is normally used. And as of now there is no Linux driver for this chip. PS reference clock is generated out of si570 chip which is also new approach compare to zcu208. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/3b296ef0f52bd94e32bdeb6d1beee29ac85f00a2.1695808407.git.michal.simek@amd.com
2023-09-27 09:53:36 +00:00
// SPDX-License-Identifier: GPL-2.0
/*
* dts file for Xilinx ZynqMP ZCU670 (67DR)
*
* (C) Copyright 2017 - 2022, Xilinx, Inc.
* (C) Copyright 2022 - 2023, Advanced Micro Devices, Inc.
*
* Michal Simek <michal.simek@amd.com>
*/
/dts-v1/;
#include "zynqmp.dtsi"
#include "zynqmp-clk-ccf.dtsi"
#include <dt-bindings/input/input.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/pinctrl/pinctrl-zynqmp.h>
#include <dt-bindings/phy/phy.h>
/ {
model = "ZynqMP ZCU670 RevA";
compatible = "xlnx,zynqmp-zcu670-revA", "xlnx,zynqmp-zcu670",
"xlnx,zynqmp";
aliases {
ethernet0 = &gem3;
i2c0 = &i2c0;
i2c1 = &i2c1;
mmc0 = &sdhci1;
nvmem0 = &eeprom;
rtc0 = &rtc;
serial0 = &uart0;
serial1 = &dcc;
spi0 = &qspi;
usb0 = &usb0;
};
chosen {
bootargs = "earlycon";
stdout-path = "serial0:115200n8";
};
memory@0 {
device_type = "memory";
reg = <0 0 0 0x80000000>, <0x8 0x0 0x0 0x80000000>;
/* Another 4GB connected to PL */
};
gpio-keys {
compatible = "gpio-keys";
autorepeat;
sw1 {
label = "sw1";
gpios = <&gpio 22 GPIO_ACTIVE_HIGH>;
linux,code = <BTN_MISC>;
wakeup-source;
autorepeat;
};
};
leds {
compatible = "gpio-leds";
heartbeat-led {
label = "heartbeat"; /* DS1 */
gpios = <&gpio 23 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "heartbeat";
};
};
ina226-vccint {
compatible = "iio-hwmon";
io-channels = <&vccint 0>, <&vccint 1>, <&vccint 2>, <&vccint 3>;
};
ina226-vccint-io-bram-ps {
compatible = "iio-hwmon";
io-channels = <&vccint_io_bram_ps 0>, <&vccint_io_bram_ps 1>, <&vccint_io_bram_ps 2>, <&vccint_io_bram_ps 3>;
};
ina226-vcc1v8 {
compatible = "iio-hwmon";
io-channels = <&vcc1v8 0>, <&vcc1v8 1>, <&vcc1v8 2>, <&vcc1v8 3>;
};
ina226-vcc1v2 {
compatible = "iio-hwmon";
io-channels = <&vcc1v2 0>, <&vcc1v2 1>, <&vcc1v2 2>, <&vcc1v2 3>;
};
ina226-vadj-fmc {
compatible = "iio-hwmon";
io-channels = <&vadj_fmc 0>, <&vadj_fmc 1>, <&vadj_fmc 2>, <&vadj_fmc 3>;
};
ina226-mgtavcc {
compatible = "iio-hwmon";
io-channels = <&mgtavcc 0>, <&mgtavcc 1>, <&mgtavcc 2>, <&mgtavcc 3>;
};
ina226-mgt1v2 {
compatible = "iio-hwmon";
io-channels = <&mgt1v2 0>, <&mgt1v2 1>, <&mgt1v2 2>, <&mgt1v2 3>;
};
ina226-mgt1v8 {
compatible = "iio-hwmon";
io-channels = <&mgt1v8 0>, <&mgt1v8 1>, <&mgt1v8 2>, <&mgt1v8 3>;
};
ina226-vccint-ams {
compatible = "iio-hwmon";
io-channels = <&vccint_ams 0>, <&vccint_ams 1>, <&vccint_ams 2>, <&vccint_ams 3>;
};
ina226-dac-avtt {
compatible = "iio-hwmon";
io-channels = <&dac_avtt 0>, <&dac_avtt 1>, <&dac_avtt 2>, <&dac_avtt 3>;
};
ina226-dac-avccaux {
compatible = "iio-hwmon";
io-channels = <&dac_avccaux 0>, <&dac_avccaux 1>, <&dac_avccaux 2>, <&dac_avccaux 3>;
};
ina226-adc-avcc {
compatible = "iio-hwmon";
io-channels = <&adc_avcc 0>, <&adc_avcc 1>, <&adc_avcc 2>, <&adc_avcc 3>;
};
ina226-adc-avccaux {
compatible = "iio-hwmon";
io-channels = <&adc_avccaux 0>, <&adc_avccaux 1>, <&adc_avccaux 2>, <&adc_avccaux 3>;
};
ina226-dac-avcc {
compatible = "iio-hwmon";
io-channels = <&dac_avcc 0>, <&dac_avcc 1>, <&dac_avcc 2>, <&dac_avcc 3>;
};
/* 48MHz reference crystal */
ref48: ref48M {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <48000000>;
};
si5381_6: si5381_6 { /* refclk_usb3 - u43 */
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <26000000>;
};
};
&dcc {
status = "okay";
};
&fpd_dma_chan1 {
status = "okay";
};
&fpd_dma_chan2 {
status = "okay";
};
&fpd_dma_chan3 {
status = "okay";
};
&fpd_dma_chan4 {
status = "okay";
};
&fpd_dma_chan5 {
status = "okay";
};
&fpd_dma_chan6 {
status = "okay";
};
&fpd_dma_chan7 {
status = "okay";
};
&fpd_dma_chan8 {
status = "okay";
};
&gem3 {
status = "okay";
phy-handle = <&phy0>;
phy-mode = "rgmii-id";
mdio: mdio {
#address-cells = <1>;
#size-cells = <0>;
phy0: ethernet-phy@c {
#phy-cells = <1>;
compatible = "ethernet-phy-id2000.a231";
reg = <0xc>;
ti,rx-internal-delay = <0x8>;
ti,tx-internal-delay = <0xa>;
ti,fifo-depth = <0x1>;
ti,dp83867-rxctrl-strap-quirk;
reset-gpios = <&tca6416_u15 6 GPIO_ACTIVE_LOW>;
};
};
};
&gpio {
status = "okay";
gpio-line-names = "QSPI_LWR_CLK", "QSPI_LWR_DQ1", "QSPI_LWR_DQ2", "QSPI_LWR_DQ3", "QSPI_LWR_DQ0", /* 0 - 4 */
"QSPI_LWR_CS_B", "", "QSPI_UPR_CS_B", "QSPI_UPR_DQ0", "QSPI_UPR_DQ1", /* 5 - 9 */
"QSPI_UPR_DQ2", "QSPI_UPR_DQ3", "QSPI_UPR_CLK", "PS_GPIO2", "I2C0_SCL", /* 10 - 14 */
"I2C0_SDA", "I2C1_SCL", "I2C1_SDA", "UART0_TXD", "UART0_RXD", /* 15 - 19 */
"", "", "BUTTON", "LED", "", /* 20 - 24 */
"", "PMU_INPUT", "SFP3_TX_DISABLE", "SFP2_TX_DISABLE", "SFP1_TX_DISABLE", /* 25 - 29 */
"SFP0_TX_DISABLE", "", "PMU_GPO0", "PMU_GPO1", "PMU_GPO2", /* 30 - 34 */
"PMU_GPO3", "PMU_GPO4", "PMU_GPO5", "PS_GPIO1", "SDIO_SEL", /* 35 - 39 */
"SDIO_DIR_CMD", "SDIO_DIR_DAT0", "SDIO_DIR_DAT1", "SD_PWR_RST", "", /* 40 - 44 */
"SDIO_DETECT", "SDIO_DAT0", "SDIO_DAT1", "SDIO_DAT2", "SDIO_DAT3", /* 45 - 49 */
"SDIO_CMD", "SDIO_CLK", "USB_CLK", "USB_DIR", "USB_DATA2", /* 50 - 54 */
"USB_NXT", "USB_DATA0", "USB_DATA1", "USB_STP", "USB_DATA3", /* 55 - 59 */
"USB_DATA4", "USB_DATA5", "USB_DATA6", "USB_DATA7", "ENET_TX_CLK", /* 60 - 64 */
"ENET_TX_D0", "ENET_TX_D1", "ENET_TX_D2", "ENET_TX_D3", "ENET_TX_CTRL", /* 65 - 69 */
"ENET_RX_CLK", "ENET_RX_D0", "ENET_RX_D1", "ENET_RX_D2", "ENET_RX_D3", /* 70 - 74 */
"ENET_RX_CTRL", "ENET_MDC", "ENET_MDIO", /* 75 - 77, MIO end and EMIO start */
"", "", /* 78 - 79 */
"", "", "", "", "", /* 80 - 84 */
"", "", "", "", "", /* 85 - 89 */
"", "", "", "", "", /* 90 - 94 */
"", "", "", "", "", /* 95 - 99 */
"", "", "", "", "", /* 100 - 104 */
"", "", "", "", "", /* 105 - 109 */
"", "", "", "", "", /* 110 - 114 */
"", "", "", "", "", /* 115 - 119 */
"", "", "", "", "", /* 120 - 124 */
"", "", "", "", "", /* 125 - 129 */
"", "", "", "", "", /* 130 - 134 */
"", "", "", "", "", /* 135 - 139 */
"", "", "", "", "", /* 140 - 144 */
"", "", "", "", "", /* 145 - 149 */
"", "", "", "", "", /* 150 - 154 */
"", "", "", "", "", /* 155 - 159 */
"", "", "", "", "", /* 160 - 164 */
"", "", "", "", "", /* 165 - 169 */
"", "", "", ""; /* 170 - 173 */
};
&i2c0 {
status = "okay";
clock-frequency = <400000>;
pinctrl-names = "default", "gpio";
pinctrl-0 = <&pinctrl_i2c0_default>;
pinctrl-1 = <&pinctrl_i2c0_gpio>;
scl-gpios = <&gpio 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
sda-gpios = <&gpio 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
tca6416_u15: gpio@20 { /* u15 */
compatible = "ti,tca6416";
reg = <0x20>;
gpio-controller; /* interrupt not connected */
#gpio-cells = <2>;
gpio-line-names = "MAX6643_OT_B", "MAX6643_FANFAIL_B", "MIO26_PMU_INPUT_LS", "DAC_AVTT_VOUT_SEL", /* 0 - 3 */
"SI5381_INT_ALM", "IIC_MUX_RESET_B", "GEM3_EXP_RESET_B", "MAX6643_FULL_SPEED", /* 4 - 7 */
"FMCP_HSPC_PRSNT_M2C_B", "", "", "VCCINT_VRHOT_B", /* 10 - 13 */
"", "8A34001_EXP_RST_B", "IRPS5401_ALERT_B", "INA226_PMBUS_ALERT"; /* 14 - 17 */
};
i2c-mux@75 { /* u17 */
compatible = "nxp,pca9544";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x75>;
i2c@0 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
/* PS_PMBUS */
/* PMBUS_ALERT done via pca9544 */
vccint: ina226@40 { /* u65 */
compatible = "ti,ina226";
#io-channel-cells = <1>;
label = "ina226-vccint";
reg = <0x40>;
shunt-resistor = <5000>;
};
vccint_io_bram_ps: ina226@41 { /* u57 */
compatible = "ti,ina226";
#io-channel-cells = <1>;
label = "ina226-vccint-io-bram-ps";
reg = <0x41>;
shunt-resistor = <5000>;
};
vcc1v8: ina226@42 { /* u60 */
compatible = "ti,ina226";
#io-channel-cells = <1>;
label = "ina226-vcc1v8";
reg = <0x42>;
shunt-resistor = <2000>;
};
vcc1v2: ina226@43 { /* u58 */
compatible = "ti,ina226";
#io-channel-cells = <1>;
label = "ina226-vcc1v2";
reg = <0x43>;
shunt-resistor = <5000>;
};
vadj_fmc: ina226@45 { /* u62 */
compatible = "ti,ina226";
#io-channel-cells = <1>;
label = "ina226-vadj-fmc";
reg = <0x45>;
shunt-resistor = <5000>;
};
mgtavcc: ina226@46 { /* u67 */
compatible = "ti,ina226";
#io-channel-cells = <1>;
label = "ina226-mgtavcc";
reg = <0x46>;
shunt-resistor = <2000>;
};
mgt1v2: ina226@47 { /* u63 */
compatible = "ti,ina226";
#io-channel-cells = <1>;
label = "ina226-mgt1v2";
reg = <0x47>;
shunt-resistor = <5000>; /* Not in schematics */
};
mgt1v8: ina226@48 { /* u64 */
compatible = "ti,ina226";
#io-channel-cells = <1>;
label = "ina226-mgt1v8";
reg = <0x48>;
shunt-resistor = <5000>;
};
vccint_ams: ina226@49 { /* u61 */
compatible = "ti,ina226";
#io-channel-cells = <1>;
label = "ina226-vccint-ams";
reg = <0x49>;
shunt-resistor = <5000>;
};
dac_avtt: ina226@4a { /* u59 */
compatible = "ti,ina226";
#io-channel-cells = <1>;
label = "ina226-dac-avtt";
reg = <0x4a>;
shunt-resistor = <5000>;
};
dac_avccaux: ina226@4b { /* u124 */
compatible = "ti,ina226";
#io-channel-cells = <1>;
label = "ina226-dac-avccaux";
reg = <0x4b>;
shunt-resistor = <5000>;
};
adc_avcc: ina226@4c { /* u75 */
compatible = "ti,ina226";
#io-channel-cells = <1>;
label = "ina226-adc-avcc";
reg = <0x4c>;
shunt-resistor = <5000>;
};
adc_avccaux: ina226@4d { /* u71 */
compatible = "ti,ina226";
#io-channel-cells = <1>;
label = "ina226-adc-avccaux";
reg = <0x4d>;
shunt-resistor = <5000>;
};
dac_avcc: ina226@4e { /* u77 */
compatible = "ti,ina226";
#io-channel-cells = <1>;
label = "ina226-dac-avcc";
reg = <0x4e>;
shunt-resistor = <5000>;
};
};
i2c@1 {
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
/* NC */
};
i2c@2 {
#address-cells = <1>;
#size-cells = <0>;
reg = <2>;
/* u104 - ir35215 0x10/0x40 */
/* u127 - ir38164 0x1b/0x4b */
/* u112 - ir38164 0x13/0x43 */
/* u123 - ir38164 0x1c/0x4c */
irps5401_44: irps5401@44 { /* IRPS5401 - u53 */
compatible = "infineon,irps5401";
reg = <0x44>; /* i2c addr 0x14 */
};
irps5401_45: irps5401@45 { /* IRPS5401 - u55 */
compatible = "infineon,irps5401";
reg = <0x45>; /* i2c addr 0x15 */
};
/* J21 header too */
};
i2c@3 {
#address-cells = <1>;
#size-cells = <0>;
reg = <3>;
/* SYSMON */
};
};
/* u38 MPS430 */
};
&i2c1 {
status = "okay";
clock-frequency = <400000>;
pinctrl-names = "default", "gpio";
pinctrl-0 = <&pinctrl_i2c1_default>;
pinctrl-1 = <&pinctrl_i2c1_gpio>;
scl-gpios = <&gpio 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
sda-gpios = <&gpio 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
i2c-mux@74 {
compatible = "nxp,pca9548"; /* u20 */
#address-cells = <1>;
#size-cells = <0>;
reg = <0x74>;
/* FIXME reset-gpios = <&tca6416_u15 SYSCTLR_IIC_MUX0_RESET_B GPIO_ACTIVE_HIGH>; */
i2c_eeprom: i2c@0 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
/*
* IIC_EEPROM 1kB memory which uses 256B blocks
* where every block has different address.
* 0 - 256B address 0x54
* 256B - 512B address 0x55
* 512B - 768B address 0x56
* 768B - 1024B address 0x57
*/
eeprom: eeprom@54 { /* u21 */
compatible = "atmel,24c128";
reg = <0x54>;
};
};
i2c_si5381: i2c@1 {
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
/* SI5381 - u43 */
/* si5381: clock-generator@68 {
reg = <0x68>;
};*/
};
i2c_si570_user_c0: i2c@2 {
#address-cells = <1>;
#size-cells = <0>;
reg = <2>;
si570_1: clock-generator@5d { /* USER C0 SI570 - u47 */
#clock-cells = <0>;
compatible = "silabs,si570";
reg = <0x5d>;
temperature-stability = <50>;
factory-fout = <300000000>;
clock-frequency = <300000000>;
clock-output-names = "si570_user_c0";
};
};
i2c_si570_mgt: i2c@3 {
#address-cells = <1>;
#size-cells = <0>;
reg = <3>;
si570_2: clock-generator@5d { /* USER MGT SI570 - u48 */
#clock-cells = <0>;
compatible = "silabs,si570";
reg = <0x5d>;
temperature-stability = <50>;
factory-fout = <156250000>;
clock-frequency = <156250000>;
clock-output-names = "si570_mgt";
};
};
i2c_8a34001: i2c@4 {
#address-cells = <1>;
#size-cells = <0>;
reg = <4>;
/* U409B - 8a34001 */
};
i2c_clk104: i2c@5 {
#address-cells = <1>;
#size-cells = <0>;
reg = <5>;
/* CLK104_SDA */
};
i2c@6 {
#address-cells = <1>;
#size-cells = <0>;
reg = <6>;
/* RFMCP connector */
};
/* 7 NC */
};
i2c-mux@75 {
compatible = "nxp,pca9548"; /* u22 */
#address-cells = <1>;
#size-cells = <0>;
reg = <0x75>;
/* FIXME reset-gpios = <&tca6416_u15 SYSCTLR_IIC_MUX0_RESET_B GPIO_ACTIVE_HIGH>; */
i2c@0 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
/* FMCP_HSPC_IIC */
};
i2c_si570_psrefclk: i2c@1 {
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
si570_3: clock-generator@5d { /* USER SI570 PSREFCLK - u130 */
#clock-cells = <0>;
compatible = "silabs,si570";
reg = <0x5d>;
temperature-stability = <50>;
factory-fout = <33333333>;
clock-frequency = <33333333>;
clock-output-names = "si570_ps_ref_clk";
silabs,skip-recall;
};
};
i2c@2 {
#address-cells = <1>;
#size-cells = <0>;
reg = <2>;
/* SYSMON */
};
i2c@3 {
#address-cells = <1>;
#size-cells = <0>;
reg = <3>;
/* DDR4 SODIMM */
};
i2c@4 {
#address-cells = <1>;
#size-cells = <0>;
reg = <4>;
/* SFP3 */
};
i2c@5 {
#address-cells = <1>;
#size-cells = <0>;
reg = <5>;
/* SFP2 */
};
i2c@6 {
#address-cells = <1>;
#size-cells = <0>;
reg = <6>;
/* SFP1 */
};
i2c@7 {
#address-cells = <1>;
#size-cells = <0>;
reg = <7>;
/* SFP0 */
};
};
/* u38 MPS430 */
};
&pinctrl0 {
status = "okay";
pinctrl_i2c0_default: i2c0-default {
mux {
groups = "i2c0_3_grp";
function = "i2c0";
};
conf {
groups = "i2c0_3_grp";
bias-pull-up;
slew-rate = <SLEW_RATE_SLOW>;
power-source = <IO_STANDARD_LVCMOS18>;
};
};
pinctrl_i2c0_gpio: i2c0-gpio {
mux {
groups = "gpio0_14_grp", "gpio0_15_grp";
function = "gpio0";
};
conf {
groups = "gpio0_14_grp", "gpio0_15_grp";
slew-rate = <SLEW_RATE_SLOW>;
power-source = <IO_STANDARD_LVCMOS18>;
};
};
pinctrl_i2c1_default: i2c1-default {
mux {
groups = "i2c1_4_grp";
function = "i2c1";
};
conf {
groups = "i2c1_4_grp";
bias-pull-up;
slew-rate = <SLEW_RATE_SLOW>;
power-source = <IO_STANDARD_LVCMOS18>;
};
};
pinctrl_i2c1_gpio: i2c1-gpio {
mux {
groups = "gpio0_16_grp", "gpio0_17_grp";
function = "gpio0";
};
conf {
groups = "gpio0_16_grp", "gpio0_17_grp";
slew-rate = <SLEW_RATE_SLOW>;
power-source = <IO_STANDARD_LVCMOS18>;
};
};
};
&qspi {
status = "okay";
num-cs = <2>;
flash@0 {
compatible = "m25p80", "jedec,spi-nor"; /* U11 and U12 MT25QU02GCBBE12 2Gb */
#address-cells = <1>;
#size-cells = <1>;
reg = <0>, <1>;
parallel-memories = /bits/ 64 <0x10000000 0x10000000>; /* 256MB */
spi-tx-bus-width = <4>;
spi-rx-bus-width = <4>; /* FIXME also DUAL configuration possible */
spi-max-frequency = <108000000>; /* Based on DC1 spec */
};
};
&rtc {
status = "okay";
};
/* SD1 with level shifter */
&sdhci1 {
status = "okay";
disable-wp;
/*
* This property should be removed for supporting UHS mode
*/
no-1-8-v;
xlnx,mio-bank = <1>;
};
&psgtr {
status = "okay";
/* hspc_dp4, hspc_dp5, usb3, hspc_dp6 */
clocks = <&si5381_6>;
clock-names = "ref2";
};
&uart0 {
status = "okay";
};
/* ULPI SMSC USB3320 */
&usb0 {
status = "okay";
phy-names = "usb3-phy";
phys = <&psgtr 2 PHY_TYPE_USB3 0 2>;
};
&dwc3_0 {
status = "okay";
dr_mode = "host";
snps,usb3_lpm_capable;
};
Reference in a new issue Copy permalink