2014-04-01 19:01:13 +00:00
|
|
|
/*
|
|
|
|
* Ethernet driver for TI K2HK EVM.
|
|
|
|
*
|
|
|
|
* (C) Copyright 2012-2014
|
|
|
|
* Texas Instruments Incorporated, <www.ti.com>
|
|
|
|
*
|
|
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
|
|
*/
|
|
|
|
#include <common.h>
|
|
|
|
#include <command.h>
|
|
|
|
|
|
|
|
#include <net.h>
|
|
|
|
#include <miiphy.h>
|
|
|
|
#include <malloc.h>
|
2014-09-05 16:02:47 +00:00
|
|
|
#include <asm/ti-common/keystone_nav.h>
|
2014-09-29 19:17:22 +00:00
|
|
|
#include <asm/ti-common/keystone_net.h>
|
2014-10-22 14:18:21 +00:00
|
|
|
#include <asm/ti-common/keystone_serdes.h>
|
2014-04-01 19:01:13 +00:00
|
|
|
|
|
|
|
unsigned int emac_open;
|
2014-10-17 17:44:34 +00:00
|
|
|
static struct mii_dev *mdio_bus;
|
2014-04-01 19:01:13 +00:00
|
|
|
static unsigned int sys_has_mdio = 1;
|
|
|
|
|
|
|
|
#ifdef KEYSTONE2_EMAC_GIG_ENABLE
|
|
|
|
#define emac_gigabit_enable(x) keystone2_eth_gigabit_enable(x)
|
|
|
|
#else
|
|
|
|
#define emac_gigabit_enable(x) /* no gigabit to enable */
|
|
|
|
#endif
|
|
|
|
|
|
|
|
#define RX_BUFF_NUMS 24
|
|
|
|
#define RX_BUFF_LEN 1520
|
|
|
|
#define MAX_SIZE_STREAM_BUFFER RX_BUFF_LEN
|
|
|
|
|
|
|
|
static u8 rx_buffs[RX_BUFF_NUMS * RX_BUFF_LEN] __aligned(16);
|
|
|
|
|
|
|
|
struct rx_buff_desc net_rx_buffs = {
|
|
|
|
.buff_ptr = rx_buffs,
|
|
|
|
.num_buffs = RX_BUFF_NUMS,
|
|
|
|
.buff_len = RX_BUFF_LEN,
|
|
|
|
.rx_flow = 22,
|
|
|
|
};
|
|
|
|
|
2014-10-22 14:18:21 +00:00
|
|
|
static void keystone2_net_serdes_setup(void);
|
2014-04-01 19:01:13 +00:00
|
|
|
|
|
|
|
static int gen_get_link_speed(int phy_addr);
|
|
|
|
|
|
|
|
int keystone2_eth_read_mac_addr(struct eth_device *dev)
|
|
|
|
{
|
|
|
|
struct eth_priv_t *eth_priv;
|
|
|
|
u32 maca = 0;
|
|
|
|
u32 macb = 0;
|
|
|
|
|
|
|
|
eth_priv = (struct eth_priv_t *)dev->priv;
|
|
|
|
|
|
|
|
/* Read the e-fuse mac address */
|
|
|
|
if (eth_priv->slave_port == 1) {
|
|
|
|
maca = __raw_readl(MAC_ID_BASE_ADDR);
|
|
|
|
macb = __raw_readl(MAC_ID_BASE_ADDR + 4);
|
|
|
|
}
|
|
|
|
|
|
|
|
dev->enetaddr[0] = (macb >> 8) & 0xff;
|
|
|
|
dev->enetaddr[1] = (macb >> 0) & 0xff;
|
|
|
|
dev->enetaddr[2] = (maca >> 24) & 0xff;
|
|
|
|
dev->enetaddr[3] = (maca >> 16) & 0xff;
|
|
|
|
dev->enetaddr[4] = (maca >> 8) & 0xff;
|
|
|
|
dev->enetaddr[5] = (maca >> 0) & 0xff;
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2014-10-17 17:44:34 +00:00
|
|
|
/* MDIO */
|
|
|
|
|
|
|
|
static int keystone2_mdio_reset(struct mii_dev *bus)
|
2014-04-01 19:01:13 +00:00
|
|
|
{
|
2014-10-17 17:44:34 +00:00
|
|
|
u_int32_t clkdiv;
|
|
|
|
struct mdio_regs *adap_mdio = bus->priv;
|
2014-04-01 19:01:13 +00:00
|
|
|
|
|
|
|
clkdiv = (EMAC_MDIO_BUS_FREQ / EMAC_MDIO_CLOCK_FREQ) - 1;
|
|
|
|
|
2014-10-17 17:44:34 +00:00
|
|
|
writel((clkdiv & 0xffff) | MDIO_CONTROL_ENABLE |
|
|
|
|
MDIO_CONTROL_FAULT | MDIO_CONTROL_FAULT_ENABLE,
|
2014-04-01 19:01:13 +00:00
|
|
|
&adap_mdio->control);
|
|
|
|
|
|
|
|
while (readl(&adap_mdio->control) & MDIO_CONTROL_IDLE)
|
|
|
|
;
|
2014-10-17 17:44:34 +00:00
|
|
|
|
|
|
|
return 0;
|
2014-04-01 19:01:13 +00:00
|
|
|
}
|
|
|
|
|
2014-10-17 17:44:34 +00:00
|
|
|
/**
|
|
|
|
* keystone2_mdio_read - read a PHY register via MDIO interface.
|
|
|
|
* Blocks until operation is complete.
|
|
|
|
*/
|
|
|
|
static int keystone2_mdio_read(struct mii_dev *bus,
|
|
|
|
int addr, int devad, int reg)
|
2014-04-01 19:01:13 +00:00
|
|
|
{
|
2014-10-17 17:44:34 +00:00
|
|
|
int tmp;
|
|
|
|
struct mdio_regs *adap_mdio = bus->priv;
|
2014-04-01 19:01:13 +00:00
|
|
|
|
|
|
|
while (readl(&adap_mdio->useraccess0) & MDIO_USERACCESS0_GO)
|
|
|
|
;
|
|
|
|
|
2014-10-17 17:44:34 +00:00
|
|
|
writel(MDIO_USERACCESS0_GO | MDIO_USERACCESS0_WRITE_READ |
|
|
|
|
((reg & 0x1f) << 21) | ((addr & 0x1f) << 16),
|
2014-04-01 19:01:13 +00:00
|
|
|
&adap_mdio->useraccess0);
|
|
|
|
|
|
|
|
/* Wait for command to complete */
|
|
|
|
while ((tmp = readl(&adap_mdio->useraccess0)) & MDIO_USERACCESS0_GO)
|
|
|
|
;
|
|
|
|
|
2014-10-17 17:44:34 +00:00
|
|
|
if (tmp & MDIO_USERACCESS0_ACK)
|
|
|
|
return tmp & 0xffff;
|
2014-04-01 19:01:13 +00:00
|
|
|
|
|
|
|
return -1;
|
|
|
|
}
|
|
|
|
|
2014-10-17 17:44:34 +00:00
|
|
|
/**
|
|
|
|
* keystone2_mdio_write - write to a PHY register via MDIO interface.
|
2014-04-01 19:01:13 +00:00
|
|
|
* Blocks until operation is complete.
|
|
|
|
*/
|
2014-10-17 17:44:34 +00:00
|
|
|
static int keystone2_mdio_write(struct mii_dev *bus,
|
|
|
|
int addr, int devad, int reg, u16 val)
|
2014-04-01 19:01:13 +00:00
|
|
|
{
|
2014-10-17 17:44:34 +00:00
|
|
|
struct mdio_regs *adap_mdio = bus->priv;
|
|
|
|
|
2014-04-01 19:01:13 +00:00
|
|
|
while (readl(&adap_mdio->useraccess0) & MDIO_USERACCESS0_GO)
|
|
|
|
;
|
|
|
|
|
2014-10-17 17:44:34 +00:00
|
|
|
writel(MDIO_USERACCESS0_GO | MDIO_USERACCESS0_WRITE_WRITE |
|
|
|
|
((reg & 0x1f) << 21) | ((addr & 0x1f) << 16) |
|
|
|
|
(val & 0xffff), &adap_mdio->useraccess0);
|
2014-04-01 19:01:13 +00:00
|
|
|
|
|
|
|
/* Wait for command to complete */
|
|
|
|
while (readl(&adap_mdio->useraccess0) & MDIO_USERACCESS0_GO)
|
|
|
|
;
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* PHY functions for a generic PHY */
|
|
|
|
static int gen_get_link_speed(int phy_addr)
|
|
|
|
{
|
2014-10-17 17:44:34 +00:00
|
|
|
u_int16_t tmp;
|
2014-04-01 19:01:13 +00:00
|
|
|
|
2014-10-17 17:44:34 +00:00
|
|
|
tmp = mdio_bus->read(mdio_bus, phy_addr,
|
|
|
|
MDIO_DEVAD_NONE, MII_STATUS_REG);
|
|
|
|
if (tmp & 0x04)
|
2014-04-01 19:01:13 +00:00
|
|
|
return 0;
|
|
|
|
|
|
|
|
return -1;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void __attribute__((unused))
|
|
|
|
keystone2_eth_gigabit_enable(struct eth_device *dev)
|
|
|
|
{
|
|
|
|
u_int16_t data;
|
|
|
|
struct eth_priv_t *eth_priv = (struct eth_priv_t *)dev->priv;
|
|
|
|
|
|
|
|
if (sys_has_mdio) {
|
2014-10-17 17:44:34 +00:00
|
|
|
data = keystone2_mdio_read(mdio_bus, eth_priv->phy_addr,
|
|
|
|
MDIO_DEVAD_NONE, 0);
|
|
|
|
/* speed selection MSB */
|
|
|
|
if (!(data & (1 << 6)))
|
2014-04-01 19:01:13 +00:00
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Check if link detected is giga-bit
|
|
|
|
* If Gigabit mode detected, enable gigbit in MAC
|
|
|
|
*/
|
2014-09-29 19:17:20 +00:00
|
|
|
writel(readl(DEVICE_EMACSL_BASE(eth_priv->slave_port - 1) +
|
|
|
|
CPGMACSL_REG_CTL) |
|
2014-04-01 19:01:13 +00:00
|
|
|
EMAC_MACCONTROL_GIGFORCE | EMAC_MACCONTROL_GIGABIT_ENABLE,
|
2014-09-29 19:17:20 +00:00
|
|
|
DEVICE_EMACSL_BASE(eth_priv->slave_port - 1) + CPGMACSL_REG_CTL);
|
2014-04-01 19:01:13 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
int keystone_sgmii_link_status(int port)
|
|
|
|
{
|
|
|
|
u32 status = 0;
|
|
|
|
|
|
|
|
status = __raw_readl(SGMII_STATUS_REG(port));
|
|
|
|
|
|
|
|
return status & SGMII_REG_STATUS_LINK;
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
int keystone_get_link_status(struct eth_device *dev)
|
|
|
|
{
|
|
|
|
struct eth_priv_t *eth_priv = (struct eth_priv_t *)dev->priv;
|
|
|
|
int sgmii_link;
|
|
|
|
int link_state = 0;
|
|
|
|
#if CONFIG_GET_LINK_STATUS_ATTEMPTS > 1
|
|
|
|
int j;
|
|
|
|
|
|
|
|
for (j = 0; (j < CONFIG_GET_LINK_STATUS_ATTEMPTS) && (link_state == 0);
|
|
|
|
j++) {
|
|
|
|
#endif
|
|
|
|
sgmii_link =
|
|
|
|
keystone_sgmii_link_status(eth_priv->slave_port - 1);
|
|
|
|
|
|
|
|
if (sgmii_link) {
|
|
|
|
link_state = 1;
|
|
|
|
|
|
|
|
if (eth_priv->sgmii_link_type == SGMII_LINK_MAC_PHY)
|
|
|
|
if (gen_get_link_speed(eth_priv->phy_addr))
|
|
|
|
link_state = 0;
|
|
|
|
}
|
|
|
|
#if CONFIG_GET_LINK_STATUS_ATTEMPTS > 1
|
|
|
|
}
|
|
|
|
#endif
|
|
|
|
return link_state;
|
|
|
|
}
|
|
|
|
|
|
|
|
int keystone_sgmii_config(int port, int interface)
|
|
|
|
{
|
|
|
|
unsigned int i, status, mask;
|
|
|
|
unsigned int mr_adv_ability, control;
|
|
|
|
|
|
|
|
switch (interface) {
|
|
|
|
case SGMII_LINK_MAC_MAC_AUTONEG:
|
|
|
|
mr_adv_ability = (SGMII_REG_MR_ADV_ENABLE |
|
|
|
|
SGMII_REG_MR_ADV_LINK |
|
|
|
|
SGMII_REG_MR_ADV_FULL_DUPLEX |
|
|
|
|
SGMII_REG_MR_ADV_GIG_MODE);
|
|
|
|
control = (SGMII_REG_CONTROL_MASTER |
|
|
|
|
SGMII_REG_CONTROL_AUTONEG);
|
|
|
|
|
|
|
|
break;
|
|
|
|
case SGMII_LINK_MAC_PHY:
|
|
|
|
case SGMII_LINK_MAC_PHY_FORCED:
|
|
|
|
mr_adv_ability = SGMII_REG_MR_ADV_ENABLE;
|
|
|
|
control = SGMII_REG_CONTROL_AUTONEG;
|
|
|
|
|
|
|
|
break;
|
|
|
|
case SGMII_LINK_MAC_MAC_FORCED:
|
|
|
|
mr_adv_ability = (SGMII_REG_MR_ADV_ENABLE |
|
|
|
|
SGMII_REG_MR_ADV_LINK |
|
|
|
|
SGMII_REG_MR_ADV_FULL_DUPLEX |
|
|
|
|
SGMII_REG_MR_ADV_GIG_MODE);
|
|
|
|
control = SGMII_REG_CONTROL_MASTER;
|
|
|
|
|
|
|
|
break;
|
|
|
|
case SGMII_LINK_MAC_FIBER:
|
|
|
|
mr_adv_ability = 0x20;
|
|
|
|
control = SGMII_REG_CONTROL_AUTONEG;
|
|
|
|
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
mr_adv_ability = SGMII_REG_MR_ADV_ENABLE;
|
|
|
|
control = SGMII_REG_CONTROL_AUTONEG;
|
|
|
|
}
|
|
|
|
|
|
|
|
__raw_writel(0, SGMII_CTL_REG(port));
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Wait for the SerDes pll to lock,
|
|
|
|
* but don't trap if lock is never read
|
|
|
|
*/
|
|
|
|
for (i = 0; i < 1000; i++) {
|
|
|
|
udelay(2000);
|
|
|
|
status = __raw_readl(SGMII_STATUS_REG(port));
|
|
|
|
if ((status & SGMII_REG_STATUS_LOCK) != 0)
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
|
|
|
__raw_writel(mr_adv_ability, SGMII_MRADV_REG(port));
|
|
|
|
__raw_writel(control, SGMII_CTL_REG(port));
|
|
|
|
|
|
|
|
|
|
|
|
mask = SGMII_REG_STATUS_LINK;
|
|
|
|
|
|
|
|
if (control & SGMII_REG_CONTROL_AUTONEG)
|
|
|
|
mask |= SGMII_REG_STATUS_AUTONEG;
|
|
|
|
|
|
|
|
for (i = 0; i < 1000; i++) {
|
|
|
|
status = __raw_readl(SGMII_STATUS_REG(port));
|
|
|
|
if ((status & mask) == mask)
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
int mac_sl_reset(u32 port)
|
|
|
|
{
|
|
|
|
u32 i, v;
|
|
|
|
|
|
|
|
if (port >= DEVICE_N_GMACSL_PORTS)
|
|
|
|
return GMACSL_RET_INVALID_PORT;
|
|
|
|
|
|
|
|
/* Set the soft reset bit */
|
2014-08-28 13:07:45 +00:00
|
|
|
writel(CPGMAC_REG_RESET_VAL_RESET,
|
|
|
|
DEVICE_EMACSL_BASE(port) + CPGMACSL_REG_RESET);
|
2014-04-01 19:01:13 +00:00
|
|
|
|
|
|
|
/* Wait for the bit to clear */
|
|
|
|
for (i = 0; i < DEVICE_EMACSL_RESET_POLL_COUNT; i++) {
|
2014-08-28 13:07:45 +00:00
|
|
|
v = readl(DEVICE_EMACSL_BASE(port) + CPGMACSL_REG_RESET);
|
2014-04-01 19:01:13 +00:00
|
|
|
if ((v & CPGMAC_REG_RESET_VAL_RESET_MASK) !=
|
|
|
|
CPGMAC_REG_RESET_VAL_RESET)
|
|
|
|
return GMACSL_RET_OK;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Timeout on the reset */
|
|
|
|
return GMACSL_RET_WARN_RESET_INCOMPLETE;
|
|
|
|
}
|
|
|
|
|
|
|
|
int mac_sl_config(u_int16_t port, struct mac_sl_cfg *cfg)
|
|
|
|
{
|
|
|
|
u32 v, i;
|
|
|
|
int ret = GMACSL_RET_OK;
|
|
|
|
|
|
|
|
if (port >= DEVICE_N_GMACSL_PORTS)
|
|
|
|
return GMACSL_RET_INVALID_PORT;
|
|
|
|
|
|
|
|
if (cfg->max_rx_len > CPGMAC_REG_MAXLEN_LEN) {
|
|
|
|
cfg->max_rx_len = CPGMAC_REG_MAXLEN_LEN;
|
|
|
|
ret = GMACSL_RET_WARN_MAXLEN_TOO_BIG;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Must wait if the device is undergoing reset */
|
|
|
|
for (i = 0; i < DEVICE_EMACSL_RESET_POLL_COUNT; i++) {
|
2014-08-28 13:07:45 +00:00
|
|
|
v = readl(DEVICE_EMACSL_BASE(port) + CPGMACSL_REG_RESET);
|
2014-04-01 19:01:13 +00:00
|
|
|
if ((v & CPGMAC_REG_RESET_VAL_RESET_MASK) !=
|
|
|
|
CPGMAC_REG_RESET_VAL_RESET)
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (i == DEVICE_EMACSL_RESET_POLL_COUNT)
|
|
|
|
return GMACSL_RET_CONFIG_FAIL_RESET_ACTIVE;
|
|
|
|
|
2014-08-28 13:07:45 +00:00
|
|
|
writel(cfg->max_rx_len, DEVICE_EMACSL_BASE(port) + CPGMACSL_REG_MAXLEN);
|
|
|
|
writel(cfg->ctl, DEVICE_EMACSL_BASE(port) + CPGMACSL_REG_CTL);
|
2014-04-01 19:01:13 +00:00
|
|
|
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
int ethss_config(u32 ctl, u32 max_pkt_size)
|
|
|
|
{
|
|
|
|
u32 i;
|
|
|
|
|
|
|
|
/* Max length register */
|
2014-08-28 13:07:45 +00:00
|
|
|
writel(max_pkt_size, DEVICE_CPSW_BASE + CPSW_REG_MAXLEN);
|
2014-04-01 19:01:13 +00:00
|
|
|
|
|
|
|
/* Control register */
|
2014-08-28 13:07:45 +00:00
|
|
|
writel(ctl, DEVICE_CPSW_BASE + CPSW_REG_CTL);
|
2014-04-01 19:01:13 +00:00
|
|
|
|
|
|
|
/* All statistics enabled by default */
|
2014-08-28 13:07:45 +00:00
|
|
|
writel(CPSW_REG_VAL_STAT_ENABLE_ALL,
|
|
|
|
DEVICE_CPSW_BASE + CPSW_REG_STAT_PORT_EN);
|
2014-04-01 19:01:13 +00:00
|
|
|
|
|
|
|
/* Reset and enable the ALE */
|
2014-08-28 13:07:45 +00:00
|
|
|
writel(CPSW_REG_VAL_ALE_CTL_RESET_AND_ENABLE |
|
|
|
|
CPSW_REG_VAL_ALE_CTL_BYPASS,
|
|
|
|
DEVICE_CPSW_BASE + CPSW_REG_ALE_CONTROL);
|
2014-04-01 19:01:13 +00:00
|
|
|
|
|
|
|
/* All ports put into forward mode */
|
|
|
|
for (i = 0; i < DEVICE_CPSW_NUM_PORTS; i++)
|
2014-08-28 13:07:45 +00:00
|
|
|
writel(CPSW_REG_VAL_PORTCTL_FORWARD_MODE,
|
|
|
|
DEVICE_CPSW_BASE + CPSW_REG_ALE_PORTCTL(i));
|
2014-04-01 19:01:13 +00:00
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
int ethss_start(void)
|
|
|
|
{
|
|
|
|
int i;
|
|
|
|
struct mac_sl_cfg cfg;
|
|
|
|
|
|
|
|
cfg.max_rx_len = MAX_SIZE_STREAM_BUFFER;
|
|
|
|
cfg.ctl = GMACSL_ENABLE | GMACSL_RX_ENABLE_EXT_CTL;
|
|
|
|
|
|
|
|
for (i = 0; i < DEVICE_N_GMACSL_PORTS; i++) {
|
|
|
|
mac_sl_reset(i);
|
|
|
|
mac_sl_config(i, &cfg);
|
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
int ethss_stop(void)
|
|
|
|
{
|
|
|
|
int i;
|
|
|
|
|
|
|
|
for (i = 0; i < DEVICE_N_GMACSL_PORTS; i++)
|
|
|
|
mac_sl_reset(i);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
int32_t cpmac_drv_send(u32 *buffer, int num_bytes, int slave_port_num)
|
|
|
|
{
|
|
|
|
if (num_bytes < EMAC_MIN_ETHERNET_PKT_SIZE)
|
|
|
|
num_bytes = EMAC_MIN_ETHERNET_PKT_SIZE;
|
|
|
|
|
2014-09-05 16:02:48 +00:00
|
|
|
return ksnav_send(&netcp_pktdma, buffer,
|
|
|
|
num_bytes, (slave_port_num) << 16);
|
2014-04-01 19:01:13 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
/* Eth device open */
|
|
|
|
static int keystone2_eth_open(struct eth_device *dev, bd_t *bis)
|
|
|
|
{
|
|
|
|
int link;
|
|
|
|
struct eth_priv_t *eth_priv = (struct eth_priv_t *)dev->priv;
|
|
|
|
|
|
|
|
debug("+ emac_open\n");
|
|
|
|
|
|
|
|
net_rx_buffs.rx_flow = eth_priv->rx_flow;
|
|
|
|
|
|
|
|
sys_has_mdio =
|
|
|
|
(eth_priv->sgmii_link_type == SGMII_LINK_MAC_PHY) ? 1 : 0;
|
|
|
|
|
2014-10-22 14:18:21 +00:00
|
|
|
keystone2_net_serdes_setup();
|
2014-04-01 19:01:13 +00:00
|
|
|
|
|
|
|
keystone_sgmii_config(eth_priv->slave_port - 1,
|
|
|
|
eth_priv->sgmii_link_type);
|
|
|
|
|
|
|
|
udelay(10000);
|
|
|
|
|
|
|
|
/* On chip switch configuration */
|
|
|
|
ethss_config(target_get_switch_ctl(), SWITCH_MAX_PKT_SIZE);
|
|
|
|
|
|
|
|
/* TODO: add error handling code */
|
|
|
|
if (qm_init()) {
|
|
|
|
printf("ERROR: qm_init()\n");
|
|
|
|
return -1;
|
|
|
|
}
|
2014-09-05 16:02:48 +00:00
|
|
|
if (ksnav_init(&netcp_pktdma, &net_rx_buffs)) {
|
2014-04-01 19:01:13 +00:00
|
|
|
qm_close();
|
|
|
|
printf("ERROR: netcp_init()\n");
|
|
|
|
return -1;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Streaming switch configuration. If not present this
|
|
|
|
* statement is defined to void in target.h.
|
|
|
|
* If present this is usually defined to a series of register writes
|
|
|
|
*/
|
|
|
|
hw_config_streaming_switch();
|
|
|
|
|
|
|
|
if (sys_has_mdio) {
|
2014-10-17 17:44:34 +00:00
|
|
|
keystone2_mdio_reset(mdio_bus);
|
2014-04-01 19:01:13 +00:00
|
|
|
|
|
|
|
link = keystone_get_link_status(dev);
|
|
|
|
if (link == 0) {
|
2014-09-05 16:02:48 +00:00
|
|
|
ksnav_close(&netcp_pktdma);
|
2014-04-01 19:01:13 +00:00
|
|
|
qm_close();
|
|
|
|
return -1;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
emac_gigabit_enable(dev);
|
|
|
|
|
|
|
|
ethss_start();
|
|
|
|
|
|
|
|
debug("- emac_open\n");
|
|
|
|
|
|
|
|
emac_open = 1;
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Eth device close */
|
|
|
|
void keystone2_eth_close(struct eth_device *dev)
|
|
|
|
{
|
|
|
|
debug("+ emac_close\n");
|
|
|
|
|
|
|
|
if (!emac_open)
|
|
|
|
return;
|
|
|
|
|
|
|
|
ethss_stop();
|
|
|
|
|
2014-09-05 16:02:48 +00:00
|
|
|
ksnav_close(&netcp_pktdma);
|
2014-04-01 19:01:13 +00:00
|
|
|
qm_close();
|
|
|
|
|
|
|
|
emac_open = 0;
|
|
|
|
|
|
|
|
debug("- emac_close\n");
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* This function sends a single packet on the network and returns
|
|
|
|
* positive number (number of bytes transmitted) or negative for error
|
|
|
|
*/
|
|
|
|
static int keystone2_eth_send_packet(struct eth_device *dev,
|
|
|
|
void *packet, int length)
|
|
|
|
{
|
|
|
|
int ret_status = -1;
|
|
|
|
struct eth_priv_t *eth_priv = (struct eth_priv_t *)dev->priv;
|
|
|
|
|
|
|
|
if (keystone_get_link_status(dev) == 0)
|
|
|
|
return -1;
|
|
|
|
|
|
|
|
if (cpmac_drv_send((u32 *)packet, length, eth_priv->slave_port) != 0)
|
|
|
|
return ret_status;
|
|
|
|
|
|
|
|
return length;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* This function handles receipt of a packet from the network
|
|
|
|
*/
|
|
|
|
static int keystone2_eth_rcv_packet(struct eth_device *dev)
|
|
|
|
{
|
|
|
|
void *hd;
|
|
|
|
int pkt_size;
|
|
|
|
u32 *pkt;
|
|
|
|
|
2014-09-05 16:02:48 +00:00
|
|
|
hd = ksnav_recv(&netcp_pktdma, &pkt, &pkt_size);
|
2014-04-01 19:01:13 +00:00
|
|
|
if (hd == NULL)
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
NetReceive((uchar *)pkt, pkt_size);
|
|
|
|
|
2014-09-05 16:02:48 +00:00
|
|
|
ksnav_release_rxhd(&netcp_pktdma, hd);
|
2014-04-01 19:01:13 +00:00
|
|
|
|
|
|
|
return pkt_size;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* This function initializes the EMAC hardware.
|
|
|
|
*/
|
|
|
|
int keystone2_emac_initialize(struct eth_priv_t *eth_priv)
|
|
|
|
{
|
2014-10-17 17:44:34 +00:00
|
|
|
int res;
|
2014-04-01 19:01:13 +00:00
|
|
|
struct eth_device *dev;
|
|
|
|
|
|
|
|
dev = malloc(sizeof(struct eth_device));
|
|
|
|
if (dev == NULL)
|
|
|
|
return -1;
|
|
|
|
|
|
|
|
memset(dev, 0, sizeof(struct eth_device));
|
|
|
|
|
|
|
|
strcpy(dev->name, eth_priv->int_name);
|
|
|
|
dev->priv = eth_priv;
|
|
|
|
|
|
|
|
keystone2_eth_read_mac_addr(dev);
|
|
|
|
|
|
|
|
dev->iobase = 0;
|
|
|
|
dev->init = keystone2_eth_open;
|
|
|
|
dev->halt = keystone2_eth_close;
|
|
|
|
dev->send = keystone2_eth_send_packet;
|
|
|
|
dev->recv = keystone2_eth_rcv_packet;
|
|
|
|
|
|
|
|
eth_register(dev);
|
|
|
|
|
2014-10-17 17:44:34 +00:00
|
|
|
/* Register MDIO bus if it's not registered yet */
|
|
|
|
if (!mdio_bus) {
|
|
|
|
mdio_bus = mdio_alloc();
|
|
|
|
mdio_bus->read = keystone2_mdio_read;
|
|
|
|
mdio_bus->write = keystone2_mdio_write;
|
|
|
|
mdio_bus->reset = keystone2_mdio_reset;
|
|
|
|
mdio_bus->priv = (void *)EMAC_MDIO_BASE_ADDR;
|
|
|
|
sprintf(mdio_bus->name, "ethernet-mdio");
|
|
|
|
|
|
|
|
res = mdio_register(mdio_bus);
|
|
|
|
if (res)
|
|
|
|
return res;
|
|
|
|
}
|
|
|
|
|
2014-04-01 19:01:13 +00:00
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2014-10-22 14:18:23 +00:00
|
|
|
struct ks2_serdes ks2_serdes_sgmii_156p25mhz = {
|
|
|
|
.clk = SERDES_CLOCK_156P25M,
|
|
|
|
.rate = SERDES_RATE_5G,
|
|
|
|
.rate_mode = SERDES_QUARTER_RATE,
|
|
|
|
.intf = SERDES_PHY_SGMII,
|
|
|
|
.loopback = 0,
|
|
|
|
};
|
|
|
|
|
2014-10-22 14:18:21 +00:00
|
|
|
static void keystone2_net_serdes_setup(void)
|
2014-04-01 19:01:13 +00:00
|
|
|
{
|
2014-10-22 14:18:23 +00:00
|
|
|
ks2_serdes_init(CONFIG_KSNET_SERDES_SGMII_BASE,
|
|
|
|
&ks2_serdes_sgmii_156p25mhz,
|
|
|
|
CONFIG_KSNET_SERDES_LANES_PER_SGMII);
|
|
|
|
|
|
|
|
/* wait till setup */
|
|
|
|
udelay(5000);
|
2014-04-01 19:01:13 +00:00
|
|
|
}
|