u-boot/include/configs/malta.h

132 lines
3 KiB
C
Raw Normal View History

/*
* Copyright (C) 2013 Gabor Juhos <juhosg@openwrt.org>
*
* SPDX-License-Identifier: GPL-2.0
*/
#ifndef _MALTA_CONFIG_H
#define _MALTA_CONFIG_H
#include <asm/addrspace.h>
#include <asm/malta.h>
/*
* System configuration
*/
#define CONFIG_MALTA
#define CONFIG_BOARD_EARLY_INIT_F
#define CONFIG_DISPLAY_BOARDINFO
#define CONFIG_MEMSIZE_IN_BYTES
#define CONFIG_PCI
#define CONFIG_PCI_GT64120
#define CONFIG_PCI_MSC01
#define CONFIG_PCI_PNP
#define CONFIG_PCNET
#define CONFIG_PCNET_79C973
#define PCNET_HAS_PROM
#define CONFIG_MISC_INIT_R
#define CONFIG_RTC_MC146818
#define CONFIG_SYS_ISA_IO_BASE_ADDRESS 0
/*
* CPU Configuration
*/
#define CONFIG_SYS_MHZ 250 /* arbitrary value */
#define CONFIG_SYS_MIPS_TIMER_FREQ (CONFIG_SYS_MHZ * 1000000)
/*
* Memory map
*/
#define CONFIG_SYS_TEXT_BASE 0xbe000000 /* Rom version */
#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_SDRAM_BASE 0x80000000 /* Cached addr */
#define CONFIG_SYS_MEM_SIZE (256 * 1024 * 1024)
#define CONFIG_SYS_INIT_SP_OFFSET 0x400000
#define CONFIG_SYS_LOAD_ADDR 0x81000000
#define CONFIG_SYS_MEMTEST_START 0x80100000
#define CONFIG_SYS_MEMTEST_END 0x80800000
#define CONFIG_SYS_MALLOC_LEN (128 * 1024)
#define CONFIG_SYS_BOOTPARAMS_LEN (128 * 1024)
#define CONFIG_SYS_BOOTM_LEN (64 * 1024 * 1024)
/*
* Console configuration
*/
kconfig: add config option for shell prompt Add option to set shell prompt string from menuconfig and migrate boards globally. The migration is done as follows: - Boards that explicitly and unconditionally set CONFIG_SYS_PROMPT had the entry moved to their defconfig files. - Boards that defined some kind of #ifdef logic which selects the CONFIG_SYS_PROMPT (for example qemu-mips) got an #undef CONFIG_SYS_PROMPT right before the #ifdef logic and were left alone. - This change forces CONFIG_SYS_PROMPT to be a per board decision, and thus CONFIG_SYS_PROMPT was removed from all <soc>_common.h and <arch>_common.h files. This results in a streamlined default value across platforms, and includes the following files: spear-common, sunxi-common, mv-common, ti_armv7_common, tegra-common, at91-sama5_common, and zynq-common. - Boards that relied on <arch/soc>_common.h values of CONFIG_SYS_PROMPT were not updated in their respective defconfig files under the assumption that since they did not explicitly define a value, they're fine with whatever the default is. - On the other hand, boards that relied on a value defined in some <boards>_common.h file such as woodburn_common, rpi-common, bur_am335x_common, ls2085a_common, siemens_am33x_common, and omap3_evm_common, had their values moved to the respective defconfig files. - The define V_PROMPT was removed, since it is not used anywhere except for assigning a value for CONFIG_SYS_PROMPT. Cc: Tom Rini <trini@konsulko.com> Cc: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il> [trini: Add spring, sniper, smartweb to conversion] Signed-off-by: Tom Rini <trini@konsulko.com>
2015-08-03 09:36:58 +00:00
#undef CONFIG_SYS_PROMPT
#if defined(CONFIG_SYS_LITTLE_ENDIAN)
#define CONFIG_SYS_PROMPT "maltael # "
#else
#define CONFIG_SYS_PROMPT "malta # "
#endif
#define CONFIG_SYS_CBSIZE 256
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
sizeof(CONFIG_SYS_PROMPT) + 16)
#define CONFIG_SYS_MAXARGS 16
#define CONFIG_SYS_HUSH_PARSER
#define CONFIG_AUTO_COMPLETE
#define CONFIG_CMDLINE_EDITING
/*
* Serial driver
*/
#define CONFIG_BAUDRATE 115200
#define CONFIG_SYS_NS16550
#define CONFIG_SYS_NS16550_SERIAL
#define CONFIG_SYS_NS16550_REG_SIZE 1
#define CONFIG_SYS_NS16550_CLK (115200 * 16)
#define CONFIG_SYS_NS16550_COM1 CKSEG1ADDR(MALTA_GT_UART0_BASE)
#define CONFIG_SYS_NS16550_COM2 CKSEG1ADDR(MALTA_MSC01_UART0_BASE)
#define CONFIG_CONS_INDEX 1
/*
* Flash configuration
*/
#define CONFIG_SYS_FLASH_BASE (KSEG1 | MALTA_FLASH_BASE)
#define CONFIG_SYS_MAX_FLASH_BANKS 1
#define CONFIG_SYS_MAX_FLASH_SECT 128
#define CONFIG_SYS_FLASH_CFI
#define CONFIG_FLASH_CFI_DRIVER
#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
/*
* Environment
*/
#define CONFIG_ENV_IS_IN_FLASH
#define CONFIG_ENV_SECT_SIZE 0x20000
#define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE
#define CONFIG_ENV_ADDR \
(CONFIG_SYS_FLASH_BASE + (4 << 20) - CONFIG_ENV_SIZE)
/*
* IDE/ATA
*/
#define CONFIG_SYS_IDE_MAXBUS 1
#define CONFIG_SYS_IDE_MAXDEVICE 2
#define CONFIG_SYS_ATA_BASE_ADDR CONFIG_SYS_ISA_IO_BASE_ADDRESS
#define CONFIG_SYS_ATA_IDE0_OFFSET 0x01f0
#define CONFIG_SYS_ATA_DATA_OFFSET 0
#define CONFIG_SYS_ATA_REG_OFFSET 0
/*
* Commands
*/
#define CONFIG_CMD_DATE
#define CONFIG_CMD_DHCP
#define CONFIG_CMD_IDE
#define CONFIG_CMD_PCI
#define CONFIG_CMD_PING
#define CONFIG_SYS_LONGHELP /* verbose help, undef to save memory */
#endif /* _MALTA_CONFIG_H */