Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-11-14 17:07:38 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/arch/powerpc/include/asm/config_mpc85xx.h

546 lines
18 KiB
C
Raw Normal View History

powerpc/8xxx: Introduce 85xx, 86xx, QorIQ config headers Add new headers that capture common defines for a given SoC/processor rather than duplicating that information in board config.h and random other places. Eventually this should be handled by Kconfig & defconfigs Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Acked-by: Wolfgang Denk <wd@denx.de>
2011-01-19 09:05:26 +00:00
/*
powerpc/mpc85xx:Add BSC9131/BSC9130/BSC9231 Processor Support - BSC9131 is integrated device that targets Femto base station market. It combines Power Architecture e500v2 and DSP StarCore SC3850 core technologies with MAPLE-B2F baseband acceleration processing elements. - BSC9130 is exactly same as BSC9131 except that the max e500v2 core and DSP core frequencies are 800M(these are 1G in case of 9131). - BSC9231 is similar to BSC9131 except no MAPLE The BSC9131 SoC includes the following function and features: . Power Architecture subsystem including a e500 processor with 256-Kbyte shared L2 cache . StarCore SC3850 DSP subsystem with a 512-Kbyte private L2 cache . The Multi Accelerator Platform Engine for Femto BaseStation Baseband Processing (MAPLE-B2F) . A multi-standard baseband algorithm accelerator for Channel Decoding/Encoding, Fourier Transforms, UMTS chip rate processing, LTE UP/DL Channel processing, and CRC algorithms . Consists of accelerators for Convolution, Filtering, Turbo Encoding, Turbo Decoding, Viterbi decoding, Chiprate processing, and Matrix Inversion operations . DDR3/3L memory interface with 32-bit data width without ECC and 16-bit with ECC, up to 400-MHz clock/800 MHz data rate . Dedicated security engine featuring trusted boot . DMA controller . OCNDMA with four bidirectional channels . Interfaces . Two triple-speed Gigabit Ethernet controllers featuring network acceleration including IEEE 1588. v2 hardware support and virtualization (eTSEC) . eTSEC 1 supports RGMII/RMII . eTSEC 2 supports RGMII . High-speed USB 2.0 host and device controller with ULPI interface . Enhanced secure digital (SD/MMC) host controller (eSDHC) . Antenna interface controller (AIC), supporting three industry standard JESD207/three custom ADI RF interfaces (two dual port and one single port) and three MAXIM's MaxPHY serial interfaces . ADI lanes support both full duplex FDD support and half duplex TDD support . Universal Subscriber Identity Module (USIM) interface that facilitates communication to SIM cards or Eurochip pre-paid phone cards . TDM with one TDM port . Two DUART, four eSPI, and two I2C controllers . Integrated Flash memory controller (IFC) . TDM with 256 channels . GPIO . Sixteen 32-bit timers The DSP portion of the SoC consists of DSP core (SC3850) and various accelerators pertaining to DSP operations. This patch takes care of code pertaining to power side functionality only. Signed-off-by: Ramneek Mehresh <ramneek.mehresh@freescale.com> Signed-off-by: Priyanka Jain <Priyanka.Jain@freescale.com> Signed-off-by: Akhil Goyal <Akhil.Goyal@freescale.com> Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com> Signed-off-by: Rajan Srivastava <rajan.srivastava@freescale.com> Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
2012-04-24 20:16:49 +00:00
* Copyright 2011-2012 Freescale Semiconductor, Inc.
powerpc/8xxx: Introduce 85xx, 86xx, QorIQ config headers Add new headers that capture common defines for a given SoC/processor rather than duplicating that information in board config.h and random other places. Eventually this should be handled by Kconfig & defconfigs Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Acked-by: Wolfgang Denk <wd@denx.de>
2011-01-19 09:05:26 +00:00
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*
*/
#ifndef _ASM_MPC85xx_CONFIG_H_
#define _ASM_MPC85xx_CONFIG_H_
/* SoC specific defines for Freescale MPC85xx (PQ3) and QorIQ processors */
powerpc/85xx: introduce and document CONFIG_SYS_CCSRBAR macros Introduce the CONFIG_SYS_CCSRBAR_PHYS_HIGH and CONFIG_SYS_CCSRBAR_PHYS_LOW macros, which contain the high and low portions of CONFIG_SYS_CCSRBAR_PHYS. This is necessary for the assembly-language code that relocates CCSR, since the assembler does not understand 64-bit constants. CONFIG_SYS_CCSRBAR_PHYS is automatically defined from the CONFIG_SYS_CCSRBAR_PHYS_HIGH and CONFIG_SYS_CCSRBAR_PHYS_LOW macros, so it should not be defined in a board header file. Similarly, CONFIG_SYS_CCSRBAR_DEFAULT is defined for each SOC in config_mpc85xx.h, so it should also not be defined in the board header file. CONFIG_SYS_CCSR_DO_NOT_RELOCATE is a "short-cut" macro that guarantees that CONFIG_SYS_CCSRBAR_PHYS is set to the same value as CONFIG_SYS_CCSRBAR_DEFAULT, and so CCSR will not be relocated. Since CONFIG_SYS_CCSRBAR_DEFAULT is locked to a fixed value, multi-stage U-Boot builds (e.g. NAND) are required to relocate CCSR only during the last stage (i.e. the "real" U-Boot). All other stages should define CONFIG_SYS_CCSR_DO_NOT_RELOCATE to ensure that CCSR is not relocated. README is updated with descriptions of all the CONFIG_SYS_CCSRBAR_xxx macros. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-08-04 23:03:41 +00:00
#ifdef CONFIG_SYS_CCSRBAR_DEFAULT
#error "Do not define CONFIG_SYS_CCSRBAR_DEFAULT in the board header file."
#endif
powerpc/8xxx: Introduce 85xx, 86xx, QorIQ config headers Add new headers that capture common defines for a given SoC/processor rather than duplicating that information in board config.h and random other places. Eventually this should be handled by Kconfig & defconfigs Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Acked-by: Wolfgang Denk <wd@denx.de>
2011-01-19 09:05:26 +00:00
/* Number of TLB CAM entries we have on FSL Book-E chips */
#if defined(CONFIG_E500MC)
#define CONFIG_SYS_NUM_TLBCAMS 64
#elif defined(CONFIG_E500)
#define CONFIG_SYS_NUM_TLBCAMS 16
#endif
#if defined(CONFIG_MPC8536)
#define CONFIG_MAX_CPUS 1
#define CONFIG_SYS_FSL_NUM_LAWS 12
#define CONFIG_SYS_FSL_SEC_COMPAT 2
powerpc/85xx: introduce and document CONFIG_SYS_CCSRBAR macros Introduce the CONFIG_SYS_CCSRBAR_PHYS_HIGH and CONFIG_SYS_CCSRBAR_PHYS_LOW macros, which contain the high and low portions of CONFIG_SYS_CCSRBAR_PHYS. This is necessary for the assembly-language code that relocates CCSR, since the assembler does not understand 64-bit constants. CONFIG_SYS_CCSRBAR_PHYS is automatically defined from the CONFIG_SYS_CCSRBAR_PHYS_HIGH and CONFIG_SYS_CCSRBAR_PHYS_LOW macros, so it should not be defined in a board header file. Similarly, CONFIG_SYS_CCSRBAR_DEFAULT is defined for each SOC in config_mpc85xx.h, so it should also not be defined in the board header file. CONFIG_SYS_CCSR_DO_NOT_RELOCATE is a "short-cut" macro that guarantees that CONFIG_SYS_CCSRBAR_PHYS is set to the same value as CONFIG_SYS_CCSRBAR_DEFAULT, and so CCSR will not be relocated. Since CONFIG_SYS_CCSRBAR_DEFAULT is locked to a fixed value, multi-stage U-Boot builds (e.g. NAND) are required to relocate CCSR only during the last stage (i.e. the "real" U-Boot). All other stages should define CONFIG_SYS_CCSR_DO_NOT_RELOCATE to ensure that CCSR is not relocated. README is updated with descriptions of all the CONFIG_SYS_CCSRBAR_xxx macros. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-08-04 23:03:41 +00:00
#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000
powerpc/8xxx: Introduce 85xx, 86xx, QorIQ config headers Add new headers that capture common defines for a given SoC/processor rather than duplicating that information in board config.h and random other places. Eventually this should be handled by Kconfig & defconfigs Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Acked-by: Wolfgang Denk <wd@denx.de>
2011-01-19 09:05:26 +00:00
Minor Coding Style Cleanup. Signed-off-by: Wolfgang Denk <wd@denx.de>
2011-02-02 21:36:10 +00:00
#elif defined(CONFIG_MPC8540)
powerpc/8xxx: Introduce 85xx, 86xx, QorIQ config headers Add new headers that capture common defines for a given SoC/processor rather than duplicating that information in board config.h and random other places. Eventually this should be handled by Kconfig & defconfigs Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Acked-by: Wolfgang Denk <wd@denx.de>
2011-01-19 09:05:26 +00:00
#define CONFIG_MAX_CPUS 1
#define CONFIG_SYS_FSL_NUM_LAWS 8
powerpc/85xx: introduce and document CONFIG_SYS_CCSRBAR macros Introduce the CONFIG_SYS_CCSRBAR_PHYS_HIGH and CONFIG_SYS_CCSRBAR_PHYS_LOW macros, which contain the high and low portions of CONFIG_SYS_CCSRBAR_PHYS. This is necessary for the assembly-language code that relocates CCSR, since the assembler does not understand 64-bit constants. CONFIG_SYS_CCSRBAR_PHYS is automatically defined from the CONFIG_SYS_CCSRBAR_PHYS_HIGH and CONFIG_SYS_CCSRBAR_PHYS_LOW macros, so it should not be defined in a board header file. Similarly, CONFIG_SYS_CCSRBAR_DEFAULT is defined for each SOC in config_mpc85xx.h, so it should also not be defined in the board header file. CONFIG_SYS_CCSR_DO_NOT_RELOCATE is a "short-cut" macro that guarantees that CONFIG_SYS_CCSRBAR_PHYS is set to the same value as CONFIG_SYS_CCSRBAR_DEFAULT, and so CCSR will not be relocated. Since CONFIG_SYS_CCSRBAR_DEFAULT is locked to a fixed value, multi-stage U-Boot builds (e.g. NAND) are required to relocate CCSR only during the last stage (i.e. the "real" U-Boot). All other stages should define CONFIG_SYS_CCSR_DO_NOT_RELOCATE to ensure that CCSR is not relocated. README is updated with descriptions of all the CONFIG_SYS_CCSRBAR_xxx macros. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-08-04 23:03:41 +00:00
#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000
powerpc/8xxx: Introduce 85xx, 86xx, QorIQ config headers Add new headers that capture common defines for a given SoC/processor rather than duplicating that information in board config.h and random other places. Eventually this should be handled by Kconfig & defconfigs Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Acked-by: Wolfgang Denk <wd@denx.de>
2011-01-19 09:05:26 +00:00
Minor Coding Style Cleanup. Signed-off-by: Wolfgang Denk <wd@denx.de>
2011-02-02 21:36:10 +00:00
#elif defined(CONFIG_MPC8541)
powerpc/8xxx: Introduce 85xx, 86xx, QorIQ config headers Add new headers that capture common defines for a given SoC/processor rather than duplicating that information in board config.h and random other places. Eventually this should be handled by Kconfig & defconfigs Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Acked-by: Wolfgang Denk <wd@denx.de>
2011-01-19 09:05:26 +00:00
#define CONFIG_MAX_CPUS 1
#define CONFIG_SYS_FSL_NUM_LAWS 8
#define CONFIG_SYS_FSL_SEC_COMPAT 2
powerpc/85xx: introduce and document CONFIG_SYS_CCSRBAR macros Introduce the CONFIG_SYS_CCSRBAR_PHYS_HIGH and CONFIG_SYS_CCSRBAR_PHYS_LOW macros, which contain the high and low portions of CONFIG_SYS_CCSRBAR_PHYS. This is necessary for the assembly-language code that relocates CCSR, since the assembler does not understand 64-bit constants. CONFIG_SYS_CCSRBAR_PHYS is automatically defined from the CONFIG_SYS_CCSRBAR_PHYS_HIGH and CONFIG_SYS_CCSRBAR_PHYS_LOW macros, so it should not be defined in a board header file. Similarly, CONFIG_SYS_CCSRBAR_DEFAULT is defined for each SOC in config_mpc85xx.h, so it should also not be defined in the board header file. CONFIG_SYS_CCSR_DO_NOT_RELOCATE is a "short-cut" macro that guarantees that CONFIG_SYS_CCSRBAR_PHYS is set to the same value as CONFIG_SYS_CCSRBAR_DEFAULT, and so CCSR will not be relocated. Since CONFIG_SYS_CCSRBAR_DEFAULT is locked to a fixed value, multi-stage U-Boot builds (e.g. NAND) are required to relocate CCSR only during the last stage (i.e. the "real" U-Boot). All other stages should define CONFIG_SYS_CCSR_DO_NOT_RELOCATE to ensure that CCSR is not relocated. README is updated with descriptions of all the CONFIG_SYS_CCSRBAR_xxx macros. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-08-04 23:03:41 +00:00
#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000
powerpc/8xxx: Introduce 85xx, 86xx, QorIQ config headers Add new headers that capture common defines for a given SoC/processor rather than duplicating that information in board config.h and random other places. Eventually this should be handled by Kconfig & defconfigs Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Acked-by: Wolfgang Denk <wd@denx.de>
2011-01-19 09:05:26 +00:00
#elif defined(CONFIG_MPC8544)
#define CONFIG_MAX_CPUS 1
#define CONFIG_SYS_FSL_NUM_LAWS 10
#define CONFIG_SYS_FSL_SEC_COMPAT 2
powerpc/85xx: introduce and document CONFIG_SYS_CCSRBAR macros Introduce the CONFIG_SYS_CCSRBAR_PHYS_HIGH and CONFIG_SYS_CCSRBAR_PHYS_LOW macros, which contain the high and low portions of CONFIG_SYS_CCSRBAR_PHYS. This is necessary for the assembly-language code that relocates CCSR, since the assembler does not understand 64-bit constants. CONFIG_SYS_CCSRBAR_PHYS is automatically defined from the CONFIG_SYS_CCSRBAR_PHYS_HIGH and CONFIG_SYS_CCSRBAR_PHYS_LOW macros, so it should not be defined in a board header file. Similarly, CONFIG_SYS_CCSRBAR_DEFAULT is defined for each SOC in config_mpc85xx.h, so it should also not be defined in the board header file. CONFIG_SYS_CCSR_DO_NOT_RELOCATE is a "short-cut" macro that guarantees that CONFIG_SYS_CCSRBAR_PHYS is set to the same value as CONFIG_SYS_CCSRBAR_DEFAULT, and so CCSR will not be relocated. Since CONFIG_SYS_CCSRBAR_DEFAULT is locked to a fixed value, multi-stage U-Boot builds (e.g. NAND) are required to relocate CCSR only during the last stage (i.e. the "real" U-Boot). All other stages should define CONFIG_SYS_CCSR_DO_NOT_RELOCATE to ensure that CCSR is not relocated. README is updated with descriptions of all the CONFIG_SYS_CCSRBAR_xxx macros. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-08-04 23:03:41 +00:00
#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000
powerpc/8xxx: Introduce 85xx, 86xx, QorIQ config headers Add new headers that capture common defines for a given SoC/processor rather than duplicating that information in board config.h and random other places. Eventually this should be handled by Kconfig & defconfigs Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Acked-by: Wolfgang Denk <wd@denx.de>
2011-01-19 09:05:26 +00:00
#elif defined(CONFIG_MPC8548)
#define CONFIG_MAX_CPUS 1
#define CONFIG_SYS_FSL_NUM_LAWS 10
#define CONFIG_SYS_FSL_SEC_COMPAT 2
powerpc/85xx: introduce and document CONFIG_SYS_CCSRBAR macros Introduce the CONFIG_SYS_CCSRBAR_PHYS_HIGH and CONFIG_SYS_CCSRBAR_PHYS_LOW macros, which contain the high and low portions of CONFIG_SYS_CCSRBAR_PHYS. This is necessary for the assembly-language code that relocates CCSR, since the assembler does not understand 64-bit constants. CONFIG_SYS_CCSRBAR_PHYS is automatically defined from the CONFIG_SYS_CCSRBAR_PHYS_HIGH and CONFIG_SYS_CCSRBAR_PHYS_LOW macros, so it should not be defined in a board header file. Similarly, CONFIG_SYS_CCSRBAR_DEFAULT is defined for each SOC in config_mpc85xx.h, so it should also not be defined in the board header file. CONFIG_SYS_CCSR_DO_NOT_RELOCATE is a "short-cut" macro that guarantees that CONFIG_SYS_CCSRBAR_PHYS is set to the same value as CONFIG_SYS_CCSRBAR_DEFAULT, and so CCSR will not be relocated. Since CONFIG_SYS_CCSRBAR_DEFAULT is locked to a fixed value, multi-stage U-Boot builds (e.g. NAND) are required to relocate CCSR only during the last stage (i.e. the "real" U-Boot). All other stages should define CONFIG_SYS_CCSR_DO_NOT_RELOCATE to ensure that CCSR is not relocated. README is updated with descriptions of all the CONFIG_SYS_CCSRBAR_xxx macros. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-08-04 23:03:41 +00:00
#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000
powerpc/mpc8548: Add workaround for erratum NMG_DDR120 Erratum NMG_DDR120 (DDR19 in MPC8548 errata document) applies to some early version silicons. The default settings of the DDR IO receiver biasing may not work at cold temperature. When a failure occurs, a DDR input latches an incorrect value. The workaround will set the receiver to an acceptable bias point. Signed-off-by: Gong Chen Signed-off-by: Zhao Chenhui <chenhui.zhao@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-09-16 14:54:30 +00:00
#define CONFIG_SYS_FSL_ERRATUM_NMG_DDR120
powerpc/mpc8548: Add workaround for erratum NMG_LBC103 The erratum NMG_LBC103 is LBIU3 in MPC8548 errata document. Any local bus transaction may fail during LBIU resynchronization process when the clock divider [CLKDIV] is changing. Ensure there is no transaction on the local bus for at least 100 microseconds after changing clock divider LCRR[CLKDIV]. Refer to the erratum LBIU3 of mpc8548. Signed-off-by: Zhao Chenhui <chenhui.zhao@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-10-03 13:37:57 +00:00
#define CONFIG_SYS_FSL_ERRATUM_NMG_LBC103
powerpc/mpc8548: Add workaround for erratum NMG_eTSEC129 Erratum NMG_eTSEC129 (eTSEC86 in MPC8548 document) applies to some early verion silicons. This workaround detects if the eTSEC Rx logic is properly initialized, and reinitialize the eTSEC Rx logic. Signed-off-by: Gong Chen <g.chen@freescale.com> Signed-off-by: Zhao Chenhui <chenhui.zhao@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-10-03 13:38:50 +00:00
#define CONFIG_SYS_FSL_ERRATUM_NMG_ETSEC129
powerpc/srio: Rewrite the struct ccsr_rio Rewrite this struct for the support of two ports and two message units registers. Signed-off-by: Liu Gang <Gang.Liu@freescale.com>
2012-03-08 00:33:14 +00:00
#define CONFIG_SYS_FSL_SRIO_MAX_PORTS 1
#define CONFIG_SYS_FSL_SRIO_OB_WIN_NUM 9
#define CONFIG_SYS_FSL_SRIO_IB_WIN_NUM 5
#define CONFIG_SYS_FSL_RMU
#define CONFIG_SYS_FSL_SRIO_MSG_UNIT_NUM 2
powerpc/8xxx: Introduce 85xx, 86xx, QorIQ config headers Add new headers that capture common defines for a given SoC/processor rather than duplicating that information in board config.h and random other places. Eventually this should be handled by Kconfig & defconfigs Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Acked-by: Wolfgang Denk <wd@denx.de>
2011-01-19 09:05:26 +00:00
#elif defined(CONFIG_MPC8555)
#define CONFIG_MAX_CPUS 1
#define CONFIG_SYS_FSL_NUM_LAWS 8
#define CONFIG_SYS_FSL_SEC_COMPAT 2
powerpc/85xx: introduce and document CONFIG_SYS_CCSRBAR macros Introduce the CONFIG_SYS_CCSRBAR_PHYS_HIGH and CONFIG_SYS_CCSRBAR_PHYS_LOW macros, which contain the high and low portions of CONFIG_SYS_CCSRBAR_PHYS. This is necessary for the assembly-language code that relocates CCSR, since the assembler does not understand 64-bit constants. CONFIG_SYS_CCSRBAR_PHYS is automatically defined from the CONFIG_SYS_CCSRBAR_PHYS_HIGH and CONFIG_SYS_CCSRBAR_PHYS_LOW macros, so it should not be defined in a board header file. Similarly, CONFIG_SYS_CCSRBAR_DEFAULT is defined for each SOC in config_mpc85xx.h, so it should also not be defined in the board header file. CONFIG_SYS_CCSR_DO_NOT_RELOCATE is a "short-cut" macro that guarantees that CONFIG_SYS_CCSRBAR_PHYS is set to the same value as CONFIG_SYS_CCSRBAR_DEFAULT, and so CCSR will not be relocated. Since CONFIG_SYS_CCSRBAR_DEFAULT is locked to a fixed value, multi-stage U-Boot builds (e.g. NAND) are required to relocate CCSR only during the last stage (i.e. the "real" U-Boot). All other stages should define CONFIG_SYS_CCSR_DO_NOT_RELOCATE to ensure that CCSR is not relocated. README is updated with descriptions of all the CONFIG_SYS_CCSRBAR_xxx macros. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-08-04 23:03:41 +00:00
#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000
powerpc/8xxx: Introduce 85xx, 86xx, QorIQ config headers Add new headers that capture common defines for a given SoC/processor rather than duplicating that information in board config.h and random other places. Eventually this should be handled by Kconfig & defconfigs Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Acked-by: Wolfgang Denk <wd@denx.de>
2011-01-19 09:05:26 +00:00
#elif defined(CONFIG_MPC8560)
#define CONFIG_MAX_CPUS 1
#define CONFIG_SYS_FSL_NUM_LAWS 8
powerpc/85xx: introduce and document CONFIG_SYS_CCSRBAR macros Introduce the CONFIG_SYS_CCSRBAR_PHYS_HIGH and CONFIG_SYS_CCSRBAR_PHYS_LOW macros, which contain the high and low portions of CONFIG_SYS_CCSRBAR_PHYS. This is necessary for the assembly-language code that relocates CCSR, since the assembler does not understand 64-bit constants. CONFIG_SYS_CCSRBAR_PHYS is automatically defined from the CONFIG_SYS_CCSRBAR_PHYS_HIGH and CONFIG_SYS_CCSRBAR_PHYS_LOW macros, so it should not be defined in a board header file. Similarly, CONFIG_SYS_CCSRBAR_DEFAULT is defined for each SOC in config_mpc85xx.h, so it should also not be defined in the board header file. CONFIG_SYS_CCSR_DO_NOT_RELOCATE is a "short-cut" macro that guarantees that CONFIG_SYS_CCSRBAR_PHYS is set to the same value as CONFIG_SYS_CCSRBAR_DEFAULT, and so CCSR will not be relocated. Since CONFIG_SYS_CCSRBAR_DEFAULT is locked to a fixed value, multi-stage U-Boot builds (e.g. NAND) are required to relocate CCSR only during the last stage (i.e. the "real" U-Boot). All other stages should define CONFIG_SYS_CCSR_DO_NOT_RELOCATE to ensure that CCSR is not relocated. README is updated with descriptions of all the CONFIG_SYS_CCSRBAR_xxx macros. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-08-04 23:03:41 +00:00
#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000
powerpc/8xxx: Introduce 85xx, 86xx, QorIQ config headers Add new headers that capture common defines for a given SoC/processor rather than duplicating that information in board config.h and random other places. Eventually this should be handled by Kconfig & defconfigs Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Acked-by: Wolfgang Denk <wd@denx.de>
2011-01-19 09:05:26 +00:00
#elif defined(CONFIG_MPC8568)
#define CONFIG_MAX_CPUS 1
#define CONFIG_SYS_FSL_NUM_LAWS 10
#define CONFIG_SYS_FSL_SEC_COMPAT 2
powerpc/85xx: Cleanup some QE related defines Move some processor specific QE defines into config_mpc85xx.h and use QE_MURAM_SIZE to cleanup some ifdef mess in the QE immap struct. Also fixed up some comment style issues in immap_qe.h Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-02-01 05:09:25 +00:00
#define QE_MURAM_SIZE 0x10000UL
#define MAX_QE_RISC 2
#define QE_NUM_OF_SNUM 28
powerpc/85xx: introduce and document CONFIG_SYS_CCSRBAR macros Introduce the CONFIG_SYS_CCSRBAR_PHYS_HIGH and CONFIG_SYS_CCSRBAR_PHYS_LOW macros, which contain the high and low portions of CONFIG_SYS_CCSRBAR_PHYS. This is necessary for the assembly-language code that relocates CCSR, since the assembler does not understand 64-bit constants. CONFIG_SYS_CCSRBAR_PHYS is automatically defined from the CONFIG_SYS_CCSRBAR_PHYS_HIGH and CONFIG_SYS_CCSRBAR_PHYS_LOW macros, so it should not be defined in a board header file. Similarly, CONFIG_SYS_CCSRBAR_DEFAULT is defined for each SOC in config_mpc85xx.h, so it should also not be defined in the board header file. CONFIG_SYS_CCSR_DO_NOT_RELOCATE is a "short-cut" macro that guarantees that CONFIG_SYS_CCSRBAR_PHYS is set to the same value as CONFIG_SYS_CCSRBAR_DEFAULT, and so CCSR will not be relocated. Since CONFIG_SYS_CCSRBAR_DEFAULT is locked to a fixed value, multi-stage U-Boot builds (e.g. NAND) are required to relocate CCSR only during the last stage (i.e. the "real" U-Boot). All other stages should define CONFIG_SYS_CCSR_DO_NOT_RELOCATE to ensure that CCSR is not relocated. README is updated with descriptions of all the CONFIG_SYS_CCSRBAR_xxx macros. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-08-04 23:03:41 +00:00
#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000
powerpc/srio: Rewrite the struct ccsr_rio Rewrite this struct for the support of two ports and two message units registers. Signed-off-by: Liu Gang <Gang.Liu@freescale.com>
2012-03-08 00:33:14 +00:00
#define CONFIG_SYS_FSL_SRIO_MAX_PORTS 1
#define CONFIG_SYS_FSL_SRIO_OB_WIN_NUM 9
#define CONFIG_SYS_FSL_SRIO_IB_WIN_NUM 5
#define CONFIG_SYS_FSL_RMU
#define CONFIG_SYS_FSL_SRIO_MSG_UNIT_NUM 2
powerpc/8xxx: Introduce 85xx, 86xx, QorIQ config headers Add new headers that capture common defines for a given SoC/processor rather than duplicating that information in board config.h and random other places. Eventually this should be handled by Kconfig & defconfigs Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Acked-by: Wolfgang Denk <wd@denx.de>
2011-01-19 09:05:26 +00:00
#elif defined(CONFIG_MPC8569)
#define CONFIG_MAX_CPUS 1
#define CONFIG_SYS_FSL_NUM_LAWS 10
#define CONFIG_SYS_FSL_SEC_COMPAT 2
powerpc/85xx: Cleanup some QE related defines Move some processor specific QE defines into config_mpc85xx.h and use QE_MURAM_SIZE to cleanup some ifdef mess in the QE immap struct. Also fixed up some comment style issues in immap_qe.h Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-02-01 05:09:25 +00:00
#define QE_MURAM_SIZE 0x20000UL
#define MAX_QE_RISC 4
#define QE_NUM_OF_SNUM 46
powerpc/85xx: introduce and document CONFIG_SYS_CCSRBAR macros Introduce the CONFIG_SYS_CCSRBAR_PHYS_HIGH and CONFIG_SYS_CCSRBAR_PHYS_LOW macros, which contain the high and low portions of CONFIG_SYS_CCSRBAR_PHYS. This is necessary for the assembly-language code that relocates CCSR, since the assembler does not understand 64-bit constants. CONFIG_SYS_CCSRBAR_PHYS is automatically defined from the CONFIG_SYS_CCSRBAR_PHYS_HIGH and CONFIG_SYS_CCSRBAR_PHYS_LOW macros, so it should not be defined in a board header file. Similarly, CONFIG_SYS_CCSRBAR_DEFAULT is defined for each SOC in config_mpc85xx.h, so it should also not be defined in the board header file. CONFIG_SYS_CCSR_DO_NOT_RELOCATE is a "short-cut" macro that guarantees that CONFIG_SYS_CCSRBAR_PHYS is set to the same value as CONFIG_SYS_CCSRBAR_DEFAULT, and so CCSR will not be relocated. Since CONFIG_SYS_CCSRBAR_DEFAULT is locked to a fixed value, multi-stage U-Boot builds (e.g. NAND) are required to relocate CCSR only during the last stage (i.e. the "real" U-Boot). All other stages should define CONFIG_SYS_CCSR_DO_NOT_RELOCATE to ensure that CCSR is not relocated. README is updated with descriptions of all the CONFIG_SYS_CCSRBAR_xxx macros. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-08-04 23:03:41 +00:00
#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000
powerpc/srio: Rewrite the struct ccsr_rio Rewrite this struct for the support of two ports and two message units registers. Signed-off-by: Liu Gang <Gang.Liu@freescale.com>
2012-03-08 00:33:14 +00:00
#define CONFIG_SYS_FSL_SRIO_MAX_PORTS 1
#define CONFIG_SYS_FSL_SRIO_OB_WIN_NUM 9
#define CONFIG_SYS_FSL_SRIO_IB_WIN_NUM 5
#define CONFIG_SYS_FSL_RMU
#define CONFIG_SYS_FSL_SRIO_MSG_UNIT_NUM 2
powerpc/8xxx: Introduce 85xx, 86xx, QorIQ config headers Add new headers that capture common defines for a given SoC/processor rather than duplicating that information in board config.h and random other places. Eventually this should be handled by Kconfig & defconfigs Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Acked-by: Wolfgang Denk <wd@denx.de>
2011-01-19 09:05:26 +00:00
#elif defined(CONFIG_MPC8572)
#define CONFIG_MAX_CPUS 2
#define CONFIG_SYS_FSL_NUM_LAWS 12
#define CONFIG_SYS_FSL_SEC_COMPAT 2
powerpc/85xx: introduce and document CONFIG_SYS_CCSRBAR macros Introduce the CONFIG_SYS_CCSRBAR_PHYS_HIGH and CONFIG_SYS_CCSRBAR_PHYS_LOW macros, which contain the high and low portions of CONFIG_SYS_CCSRBAR_PHYS. This is necessary for the assembly-language code that relocates CCSR, since the assembler does not understand 64-bit constants. CONFIG_SYS_CCSRBAR_PHYS is automatically defined from the CONFIG_SYS_CCSRBAR_PHYS_HIGH and CONFIG_SYS_CCSRBAR_PHYS_LOW macros, so it should not be defined in a board header file. Similarly, CONFIG_SYS_CCSRBAR_DEFAULT is defined for each SOC in config_mpc85xx.h, so it should also not be defined in the board header file. CONFIG_SYS_CCSR_DO_NOT_RELOCATE is a "short-cut" macro that guarantees that CONFIG_SYS_CCSRBAR_PHYS is set to the same value as CONFIG_SYS_CCSRBAR_DEFAULT, and so CCSR will not be relocated. Since CONFIG_SYS_CCSRBAR_DEFAULT is locked to a fixed value, multi-stage U-Boot builds (e.g. NAND) are required to relocate CCSR only during the last stage (i.e. the "real" U-Boot). All other stages should define CONFIG_SYS_CCSR_DO_NOT_RELOCATE to ensure that CCSR is not relocated. README is updated with descriptions of all the CONFIG_SYS_CCSRBAR_xxx macros. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-08-04 23:03:41 +00:00
#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000
powerpc/85xx: Rename MPC8572 DDR erratum to DDR115 Use unique erratum number instead of platform number. Enable command that reports errata on MPC8572DS. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-01-26 05:51:27 +00:00
#define CONFIG_SYS_FSL_ERRATUM_DDR_115
powerpc/mpc85xx: implement workaround for errata DDR111 and DDR134 Workaround for the following errata: DDR111 - MCKE signal may not function correctly at assertion of HRESET DDR134 - The automatic CAS-to-Preamble feature of the DDR controller can calibrate to incorrect values These two workarounds must be implemented together because they touch common registers. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-01-26 06:05:49 +00:00
#define CONFIG_SYS_FSL_ERRATUM_DDR111_DDR134
powerpc/8xxx: Introduce 85xx, 86xx, QorIQ config headers Add new headers that capture common defines for a given SoC/processor rather than duplicating that information in board config.h and random other places. Eventually this should be handled by Kconfig & defconfigs Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Acked-by: Wolfgang Denk <wd@denx.de>
2011-01-19 09:05:26 +00:00
#elif defined(CONFIG_P1010)
#define CONFIG_MAX_CPUS 1
fsl_esdhc: Deal with watermark level register related changes P1010 and P1014 has v2.3 version of FSL eSDHC controller in which watermark level register description has been changed: 9-15 bits represent WR_WML[0:6], Max value = 128 represented by 0x00 25-31 bits represent RD_WML[0:6], Max value = 128 represented by 0x00 Signed-off-by: Priyanka Jain <Priyanka.Jain@freescale.com> Signed-off-by: Poonam Aggrwal <Poonam.Aggrwal@freescale.com> Tested-by: Stefano Babic <sbabic@denx.de> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-02-09 03:54:10 +00:00
#define CONFIG_FSL_SDHC_V2_3
powerpc/8xxx: Introduce 85xx, 86xx, QorIQ config headers Add new headers that capture common defines for a given SoC/processor rather than duplicating that information in board config.h and random other places. Eventually this should be handled by Kconfig & defconfigs Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Acked-by: Wolfgang Denk <wd@denx.de>
2011-01-19 09:05:26 +00:00
#define CONFIG_SYS_FSL_NUM_LAWS 12
powerpc/mpc85xx:Add debugger support for e500v2 SoC Freescale's e500v1 and e500v2 cores (used in mpc85xx chips) have some restrictions on external debugging (JTAG). So define CONFIG_SYS_PPC_E500_DEBUG_TLB to enable a temporary TLB entry to be used during boot to work around the limitations. Please refer doc/README.mpc85xx for more information Signed-off-by: Radu Lazarescu <radu.lazarescu@freescale.com> Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
2012-04-29 23:57:12 +00:00
#define CONFIG_SYS_PPC_E500_DEBUG_TLB 3
powerpc/8xxx: Introduce 85xx, 86xx, QorIQ config headers Add new headers that capture common defines for a given SoC/processor rather than duplicating that information in board config.h and random other places. Eventually this should be handled by Kconfig & defconfigs Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Acked-by: Wolfgang Denk <wd@denx.de>
2011-01-19 09:05:26 +00:00
#define CONFIG_TSECV2
#define CONFIG_SYS_FSL_SEC_COMPAT 4
powerpc/85xx: Adds some P1010/P1014 SoC configuration defines Add defines for FSL_SATA_V2, # of DDR controllers, reset value of CCSRBAR and SDHC erratum. Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-02-06 06:01:44 +00:00
#define CONFIG_FSL_SATA_V2
#define CONFIG_SYS_FSL_ERRATUM_ESDHC111
#define CONFIG_NUM_DDR_CONTROLLERS 1
#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000
powerpc/fsl_pci: Fix device tree fixups for newer platforms We assumed that only a small set of compatiable strings would be needed to find the PCIe device tree nodes to be fixed up. However on newer platforms the simple rules no longer work. We need to allow specifying the PCIe compatiable string for each individual SoC. We introduce CONFIG_SYS_FSL_PCIE_COMPAT for this purpose and set it if the default isn't sufficient. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-05-20 05:39:21 +00:00
#define CONFIG_SYS_FSL_PCIE_COMPAT "fsl,qoriq-pcie-v2.2"
powerpc/85xx: Add ULPI and UTMI USB Phy support for P1010/P1014 Add UTMI and ULPI PHY support for USB controller on qoriq series of processors with internal UTMI PHY implemented, for example P1010/P1014 - Use both getenv() and hwconfig to get USB phy type till getenv() is depricated - Introduce CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY to specify if soc has internal UTMI phy Signed-off-by: Ramneek Mehresh <ramneek.mehresh@freescale.com> Acked-by: Remy Bohmer <linux@bohmer.net> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-03-23 09:50:43 +00:00
#define CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY
fsl_ifc: Add the workaround for erratum IFC-A002769 (enable on P1010) Issue: The NOR-FCM does not support access to unaligned addresses for 16 bit port size Impact: When 16 bit port size is used, accesses not aligned to 16 bit address boundary will result in incorrect data Workaround: The workaround is to switch to GPCM mode for NOR Flash access. Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-06-30 08:00:28 +00:00
#define CONFIG_SYS_FSL_ERRATUM_IFC_A002769
powerpc/P1010: Add workaround for erratum P1010-A003549 (related to IFC) Issue: Peripheral connected to IFC_CS3 may hamper booting from IFC. Impact: Boot from IFC may not be successful if IFC_CS3 is used. Workaround: If IFC_CS3 is used, gate IFC_CS3 while booting from NAND or NOR. Also Software should select IFC_CS3 using PMUXCR[26:27] = 0x01. Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-06-29 11:02:52 +00:00
#define CONFIG_SYS_FSL_ERRATUM_P1010_A003549
fsl_ifc: Add the workaround for erratum IFC A-003399(enabled on P1010) Issue: Address masking doesn't work properly. When sum of the base address, defined by BA, and memory bank size, defined by AM, exceeds 4GB (0xffff_ffff) then AMASKn[AM] doesn't mask CSPRn[BA] bits. Impact: This will impact booting when we are reprogramming CSPR0(BA) and AMASK0(AMASK) while executing from NOR Flash. Workaround: Re-programming of CSPR(BA) and AMASK is done while not executing from NOR Flash. The code which programs the BA and AMASK is executed from L2-SRAM. Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-07-07 15:06:47 +00:00
#define CONFIG_SYS_FSL_ERRATUM_IFC_A003399
powerpc/8xxx: Introduce 85xx, 86xx, QorIQ config headers Add new headers that capture common defines for a given SoC/processor rather than duplicating that information in board config.h and random other places. Eventually this should be handled by Kconfig & defconfigs Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Acked-by: Wolfgang Denk <wd@denx.de>
2011-01-19 09:05:26 +00:00
powerpc/85xx: Support for Freescale P1024/P1025 processor Add Support for Freescale P1024/P1025 (dual core) and P1015/P1016 (single core) processors. P1024 is a variant of P1020 processor with a core frequency from 400Mhz to 667Mhz and comes in a 561-pin wirebond power-BGA P1025 is a variant of P1021 processor with a core frequency from 400Mhz to 667Mhz and comes in a 561-pin wirebond power-BGA P1015 is a variant of P1024 processor with single core and P1016 is a variant of P1025 processor with single core. Added comments in config_mpc85xx.h to denote single core versions of processors. Signed-off-by: Jin Qing <b24347@freescale.com> Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-02-05 19:45:07 +00:00
/* P1011 is single core version of P1020 */
powerpc/8xxx: Introduce 85xx, 86xx, QorIQ config headers Add new headers that capture common defines for a given SoC/processor rather than duplicating that information in board config.h and random other places. Eventually this should be handled by Kconfig & defconfigs Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Acked-by: Wolfgang Denk <wd@denx.de>
2011-01-19 09:05:26 +00:00
#elif defined(CONFIG_P1011)
#define CONFIG_MAX_CPUS 1
#define CONFIG_SYS_FSL_NUM_LAWS 12
powerpc/mpc85xx:Add debugger support for e500v2 SoC Freescale's e500v1 and e500v2 cores (used in mpc85xx chips) have some restrictions on external debugging (JTAG). So define CONFIG_SYS_PPC_E500_DEBUG_TLB to enable a temporary TLB entry to be used during boot to work around the limitations. Please refer doc/README.mpc85xx for more information Signed-off-by: Radu Lazarescu <radu.lazarescu@freescale.com> Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
2012-04-29 23:57:12 +00:00
#define CONFIG_SYS_PPC_E500_DEBUG_TLB 2
powerpc/8xxx: Introduce 85xx, 86xx, QorIQ config headers Add new headers that capture common defines for a given SoC/processor rather than duplicating that information in board config.h and random other places. Eventually this should be handled by Kconfig & defconfigs Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Acked-by: Wolfgang Denk <wd@denx.de>
2011-01-19 09:05:26 +00:00
#define CONFIG_TSECV2
powerpc/85xx: Handle PCIe initialization requires for P1021 class SoCs The P1011, P1012, P1015, P1016, P1020, P1021, P1024, & P1025 SoCs require that we initialize the SERDES registers if the lanes are configured for PCIe. Additionally these devices PCIe controller do not support ASPM and we have to explicitly disable it. Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-02-01 15:55:58 +00:00
#define CONFIG_FSL_PCIE_DISABLE_ASPM
powerpc/8xxx: Introduce 85xx, 86xx, QorIQ config headers Add new headers that capture common defines for a given SoC/processor rather than duplicating that information in board config.h and random other places. Eventually this should be handled by Kconfig & defconfigs Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Acked-by: Wolfgang Denk <wd@denx.de>
2011-01-19 09:05:26 +00:00
#define CONFIG_SYS_FSL_SEC_COMPAT 2
powerpc/85xx: introduce and document CONFIG_SYS_CCSRBAR macros Introduce the CONFIG_SYS_CCSRBAR_PHYS_HIGH and CONFIG_SYS_CCSRBAR_PHYS_LOW macros, which contain the high and low portions of CONFIG_SYS_CCSRBAR_PHYS. This is necessary for the assembly-language code that relocates CCSR, since the assembler does not understand 64-bit constants. CONFIG_SYS_CCSRBAR_PHYS is automatically defined from the CONFIG_SYS_CCSRBAR_PHYS_HIGH and CONFIG_SYS_CCSRBAR_PHYS_LOW macros, so it should not be defined in a board header file. Similarly, CONFIG_SYS_CCSRBAR_DEFAULT is defined for each SOC in config_mpc85xx.h, so it should also not be defined in the board header file. CONFIG_SYS_CCSR_DO_NOT_RELOCATE is a "short-cut" macro that guarantees that CONFIG_SYS_CCSRBAR_PHYS is set to the same value as CONFIG_SYS_CCSRBAR_DEFAULT, and so CCSR will not be relocated. Since CONFIG_SYS_CCSRBAR_DEFAULT is locked to a fixed value, multi-stage U-Boot builds (e.g. NAND) are required to relocate CCSR only during the last stage (i.e. the "real" U-Boot). All other stages should define CONFIG_SYS_CCSR_DO_NOT_RELOCATE to ensure that CCSR is not relocated. README is updated with descriptions of all the CONFIG_SYS_CCSRBAR_xxx macros. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-08-04 23:03:41 +00:00
#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000
powerpc/85xx: Support for Freescale P1024/P1025 processor Add Support for Freescale P1024/P1025 (dual core) and P1015/P1016 (single core) processors. P1024 is a variant of P1020 processor with a core frequency from 400Mhz to 667Mhz and comes in a 561-pin wirebond power-BGA P1025 is a variant of P1021 processor with a core frequency from 400Mhz to 667Mhz and comes in a 561-pin wirebond power-BGA P1015 is a variant of P1024 processor with single core and P1016 is a variant of P1025 processor with single core. Added comments in config_mpc85xx.h to denote single core versions of processors. Signed-off-by: Jin Qing <b24347@freescale.com> Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-02-05 19:45:07 +00:00
#define CONFIG_SYS_FSL_ERRATUM_ELBC_A001
#define CONFIG_SYS_FSL_ERRATUM_ESDHC111
powerpc/8xxx: Introduce 85xx, 86xx, QorIQ config headers Add new headers that capture common defines for a given SoC/processor rather than duplicating that information in board config.h and random other places. Eventually this should be handled by Kconfig & defconfigs Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Acked-by: Wolfgang Denk <wd@denx.de>
2011-01-19 09:05:26 +00:00
powerpc/85xx: Support for Freescale P1024/P1025 processor Add Support for Freescale P1024/P1025 (dual core) and P1015/P1016 (single core) processors. P1024 is a variant of P1020 processor with a core frequency from 400Mhz to 667Mhz and comes in a 561-pin wirebond power-BGA P1025 is a variant of P1021 processor with a core frequency from 400Mhz to 667Mhz and comes in a 561-pin wirebond power-BGA P1015 is a variant of P1024 processor with single core and P1016 is a variant of P1025 processor with single core. Added comments in config_mpc85xx.h to denote single core versions of processors. Signed-off-by: Jin Qing <b24347@freescale.com> Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-02-05 19:45:07 +00:00
/* P1012 is single core version of P1021 */
powerpc/8xxx: Introduce 85xx, 86xx, QorIQ config headers Add new headers that capture common defines for a given SoC/processor rather than duplicating that information in board config.h and random other places. Eventually this should be handled by Kconfig & defconfigs Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Acked-by: Wolfgang Denk <wd@denx.de>
2011-01-19 09:05:26 +00:00
#elif defined(CONFIG_P1012)
#define CONFIG_MAX_CPUS 1
#define CONFIG_SYS_FSL_NUM_LAWS 12
powerpc/mpc85xx:Add debugger support for e500v2 SoC Freescale's e500v1 and e500v2 cores (used in mpc85xx chips) have some restrictions on external debugging (JTAG). So define CONFIG_SYS_PPC_E500_DEBUG_TLB to enable a temporary TLB entry to be used during boot to work around the limitations. Please refer doc/README.mpc85xx for more information Signed-off-by: Radu Lazarescu <radu.lazarescu@freescale.com> Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
2012-04-29 23:57:12 +00:00
#define CONFIG_SYS_PPC_E500_DEBUG_TLB 2
powerpc/8xxx: Introduce 85xx, 86xx, QorIQ config headers Add new headers that capture common defines for a given SoC/processor rather than duplicating that information in board config.h and random other places. Eventually this should be handled by Kconfig & defconfigs Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Acked-by: Wolfgang Denk <wd@denx.de>
2011-01-19 09:05:26 +00:00
#define CONFIG_TSECV2
powerpc/85xx: Handle PCIe initialization requires for P1021 class SoCs The P1011, P1012, P1015, P1016, P1020, P1021, P1024, & P1025 SoCs require that we initialize the SERDES registers if the lanes are configured for PCIe. Additionally these devices PCIe controller do not support ASPM and we have to explicitly disable it. Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-02-01 15:55:58 +00:00
#define CONFIG_FSL_PCIE_DISABLE_ASPM
powerpc/8xxx: Introduce 85xx, 86xx, QorIQ config headers Add new headers that capture common defines for a given SoC/processor rather than duplicating that information in board config.h and random other places. Eventually this should be handled by Kconfig & defconfigs Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Acked-by: Wolfgang Denk <wd@denx.de>
2011-01-19 09:05:26 +00:00
#define CONFIG_SYS_FSL_SEC_COMPAT 2
powerpc/85xx: introduce and document CONFIG_SYS_CCSRBAR macros Introduce the CONFIG_SYS_CCSRBAR_PHYS_HIGH and CONFIG_SYS_CCSRBAR_PHYS_LOW macros, which contain the high and low portions of CONFIG_SYS_CCSRBAR_PHYS. This is necessary for the assembly-language code that relocates CCSR, since the assembler does not understand 64-bit constants. CONFIG_SYS_CCSRBAR_PHYS is automatically defined from the CONFIG_SYS_CCSRBAR_PHYS_HIGH and CONFIG_SYS_CCSRBAR_PHYS_LOW macros, so it should not be defined in a board header file. Similarly, CONFIG_SYS_CCSRBAR_DEFAULT is defined for each SOC in config_mpc85xx.h, so it should also not be defined in the board header file. CONFIG_SYS_CCSR_DO_NOT_RELOCATE is a "short-cut" macro that guarantees that CONFIG_SYS_CCSRBAR_PHYS is set to the same value as CONFIG_SYS_CCSRBAR_DEFAULT, and so CCSR will not be relocated. Since CONFIG_SYS_CCSRBAR_DEFAULT is locked to a fixed value, multi-stage U-Boot builds (e.g. NAND) are required to relocate CCSR only during the last stage (i.e. the "real" U-Boot). All other stages should define CONFIG_SYS_CCSR_DO_NOT_RELOCATE to ensure that CCSR is not relocated. README is updated with descriptions of all the CONFIG_SYS_CCSRBAR_xxx macros. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-08-04 23:03:41 +00:00
#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000
powerpc/85xx: Support for Freescale P1024/P1025 processor Add Support for Freescale P1024/P1025 (dual core) and P1015/P1016 (single core) processors. P1024 is a variant of P1020 processor with a core frequency from 400Mhz to 667Mhz and comes in a 561-pin wirebond power-BGA P1025 is a variant of P1021 processor with a core frequency from 400Mhz to 667Mhz and comes in a 561-pin wirebond power-BGA P1015 is a variant of P1024 processor with single core and P1016 is a variant of P1025 processor with single core. Added comments in config_mpc85xx.h to denote single core versions of processors. Signed-off-by: Jin Qing <b24347@freescale.com> Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-02-05 19:45:07 +00:00
#define CONFIG_SYS_FSL_ERRATUM_ELBC_A001
#define CONFIG_SYS_FSL_ERRATUM_ESDHC111
powerpc/85xx: Add P1021 specific QE and UEC support P1021 has some QE pins which need to be set in pmuxcr register before using QE functions. In this patch, pin QE0 and QE3 are set for UCC1 and UCC5 in Eth mode. QE9 and QE12 are set for MII management. QE12 needs to be released after MII access because QE12 pin is muxed with LBCTL signal. Also added relevant QE support defines unique to P1021. The P1021 QE is shared on P1012, P1016, and P1025. Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-02-11 07:25:30 +00:00
#define QE_MURAM_SIZE 0x6000UL
#define MAX_QE_RISC 1
#define QE_NUM_OF_SNUM 28
powerpc/8xxx: Introduce 85xx, 86xx, QorIQ config headers Add new headers that capture common defines for a given SoC/processor rather than duplicating that information in board config.h and random other places. Eventually this should be handled by Kconfig & defconfigs Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Acked-by: Wolfgang Denk <wd@denx.de>
2011-01-19 09:05:26 +00:00
powerpc/85xx: Support for Freescale P1024/P1025 processor Add Support for Freescale P1024/P1025 (dual core) and P1015/P1016 (single core) processors. P1024 is a variant of P1020 processor with a core frequency from 400Mhz to 667Mhz and comes in a 561-pin wirebond power-BGA P1025 is a variant of P1021 processor with a core frequency from 400Mhz to 667Mhz and comes in a 561-pin wirebond power-BGA P1015 is a variant of P1024 processor with single core and P1016 is a variant of P1025 processor with single core. Added comments in config_mpc85xx.h to denote single core versions of processors. Signed-off-by: Jin Qing <b24347@freescale.com> Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-02-05 19:45:07 +00:00
/* P1013 is single core version of P1022 */
powerpc/8xxx: Introduce 85xx, 86xx, QorIQ config headers Add new headers that capture common defines for a given SoC/processor rather than duplicating that information in board config.h and random other places. Eventually this should be handled by Kconfig & defconfigs Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Acked-by: Wolfgang Denk <wd@denx.de>
2011-01-19 09:05:26 +00:00
#elif defined(CONFIG_P1013)
#define CONFIG_MAX_CPUS 1
#define CONFIG_SYS_FSL_NUM_LAWS 12
powerpc/mpc85xx:Add debugger support for e500v2 SoC Freescale's e500v1 and e500v2 cores (used in mpc85xx chips) have some restrictions on external debugging (JTAG). So define CONFIG_SYS_PPC_E500_DEBUG_TLB to enable a temporary TLB entry to be used during boot to work around the limitations. Please refer doc/README.mpc85xx for more information Signed-off-by: Radu Lazarescu <radu.lazarescu@freescale.com> Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
2012-04-29 23:57:12 +00:00
#define CONFIG_SYS_PPC_E500_DEBUG_TLB 2
powerpc/8xxx: Introduce 85xx, 86xx, QorIQ config headers Add new headers that capture common defines for a given SoC/processor rather than duplicating that information in board config.h and random other places. Eventually this should be handled by Kconfig & defconfigs Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Acked-by: Wolfgang Denk <wd@denx.de>
2011-01-19 09:05:26 +00:00
#define CONFIG_TSECV2
#define CONFIG_SYS_FSL_SEC_COMPAT 2
powerpc/85xx: CONFIG_FSL_SATA_V2 should be defined in config_mpc85xx.h Macro CONFIG_FSL_SATA_V2 is defined if the SOC has a V2 Freescale SATA controller, so it should be defined in config_mpc85xx.h instead of the various board header files. So now CONFIG_FSL_SATA_V2 is always defined on the P1013, P1022, P2041, P3041, P5010, and P5020. It was already defined for the P1010 and P1014. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-11-21 23:10:22 +00:00
#define CONFIG_FSL_SATA_V2
powerpc/85xx: introduce and document CONFIG_SYS_CCSRBAR macros Introduce the CONFIG_SYS_CCSRBAR_PHYS_HIGH and CONFIG_SYS_CCSRBAR_PHYS_LOW macros, which contain the high and low portions of CONFIG_SYS_CCSRBAR_PHYS. This is necessary for the assembly-language code that relocates CCSR, since the assembler does not understand 64-bit constants. CONFIG_SYS_CCSRBAR_PHYS is automatically defined from the CONFIG_SYS_CCSRBAR_PHYS_HIGH and CONFIG_SYS_CCSRBAR_PHYS_LOW macros, so it should not be defined in a board header file. Similarly, CONFIG_SYS_CCSRBAR_DEFAULT is defined for each SOC in config_mpc85xx.h, so it should also not be defined in the board header file. CONFIG_SYS_CCSR_DO_NOT_RELOCATE is a "short-cut" macro that guarantees that CONFIG_SYS_CCSRBAR_PHYS is set to the same value as CONFIG_SYS_CCSRBAR_DEFAULT, and so CCSR will not be relocated. Since CONFIG_SYS_CCSRBAR_DEFAULT is locked to a fixed value, multi-stage U-Boot builds (e.g. NAND) are required to relocate CCSR only during the last stage (i.e. the "real" U-Boot). All other stages should define CONFIG_SYS_CCSR_DO_NOT_RELOCATE to ensure that CCSR is not relocated. README is updated with descriptions of all the CONFIG_SYS_CCSRBAR_xxx macros. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-08-04 23:03:41 +00:00
#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000
powerpc/85xx: Enable various errata on P1022/P1013 SoCs Enable workaround for errata ELBC A001, ESDHC 111 & SATA A001 on P1022/P1013 SoCs. Also updated P1022DS config to properly enable CONFIG_FSL_SATA_V2. Signed-off-by: Jiang Yutang <b14898@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-01-30 23:06:20 +00:00
#define CONFIG_SYS_FSL_ERRATUM_ELBC_A001
#define CONFIG_SYS_FSL_ERRATUM_ESDHC111
#define CONFIG_FSL_SATA_ERRATUM_A001
powerpc/8xxx: Introduce 85xx, 86xx, QorIQ config headers Add new headers that capture common defines for a given SoC/processor rather than duplicating that information in board config.h and random other places. Eventually this should be handled by Kconfig & defconfigs Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Acked-by: Wolfgang Denk <wd@denx.de>
2011-01-19 09:05:26 +00:00
#elif defined(CONFIG_P1014)
#define CONFIG_MAX_CPUS 1
fsl_esdhc: Deal with watermark level register related changes P1010 and P1014 has v2.3 version of FSL eSDHC controller in which watermark level register description has been changed: 9-15 bits represent WR_WML[0:6], Max value = 128 represented by 0x00 25-31 bits represent RD_WML[0:6], Max value = 128 represented by 0x00 Signed-off-by: Priyanka Jain <Priyanka.Jain@freescale.com> Signed-off-by: Poonam Aggrwal <Poonam.Aggrwal@freescale.com> Tested-by: Stefano Babic <sbabic@denx.de> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-02-09 03:54:10 +00:00
#define CONFIG_FSL_SDHC_V2_3
powerpc/8xxx: Introduce 85xx, 86xx, QorIQ config headers Add new headers that capture common defines for a given SoC/processor rather than duplicating that information in board config.h and random other places. Eventually this should be handled by Kconfig & defconfigs Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Acked-by: Wolfgang Denk <wd@denx.de>
2011-01-19 09:05:26 +00:00
#define CONFIG_SYS_FSL_NUM_LAWS 12
powerpc/mpc85xx:Add debugger support for e500v2 SoC Freescale's e500v1 and e500v2 cores (used in mpc85xx chips) have some restrictions on external debugging (JTAG). So define CONFIG_SYS_PPC_E500_DEBUG_TLB to enable a temporary TLB entry to be used during boot to work around the limitations. Please refer doc/README.mpc85xx for more information Signed-off-by: Radu Lazarescu <radu.lazarescu@freescale.com> Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
2012-04-29 23:57:12 +00:00
#define CONFIG_SYS_PPC_E500_DEBUG_TLB 3
powerpc/8xxx: Introduce 85xx, 86xx, QorIQ config headers Add new headers that capture common defines for a given SoC/processor rather than duplicating that information in board config.h and random other places. Eventually this should be handled by Kconfig & defconfigs Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Acked-by: Wolfgang Denk <wd@denx.de>
2011-01-19 09:05:26 +00:00
#define CONFIG_TSECV2
#define CONFIG_SYS_FSL_SEC_COMPAT 4
powerpc/85xx: Adds some P1010/P1014 SoC configuration defines Add defines for FSL_SATA_V2, # of DDR controllers, reset value of CCSRBAR and SDHC erratum. Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-02-06 06:01:44 +00:00
#define CONFIG_FSL_SATA_V2
#define CONFIG_SYS_FSL_ERRATUM_ESDHC111
#define CONFIG_NUM_DDR_CONTROLLERS 1
#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000
powerpc/85xx: Add ULPI and UTMI USB Phy support for P1010/P1014 Add UTMI and ULPI PHY support for USB controller on qoriq series of processors with internal UTMI PHY implemented, for example P1010/P1014 - Use both getenv() and hwconfig to get USB phy type till getenv() is depricated - Introduce CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY to specify if soc has internal UTMI phy Signed-off-by: Ramneek Mehresh <ramneek.mehresh@freescale.com> Acked-by: Remy Bohmer <linux@bohmer.net> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-03-23 09:50:43 +00:00
#define CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY
fsl_ifc: Add the workaround for erratum IFC-A002769 (enable on P1010) Issue: The NOR-FCM does not support access to unaligned addresses for 16 bit port size Impact: When 16 bit port size is used, accesses not aligned to 16 bit address boundary will result in incorrect data Workaround: The workaround is to switch to GPCM mode for NOR Flash access. Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-06-30 08:00:28 +00:00
#define CONFIG_SYS_FSL_ERRATUM_IFC_A002769
powerpc/P1010: Add workaround for erratum P1010-A003549 (related to IFC) Issue: Peripheral connected to IFC_CS3 may hamper booting from IFC. Impact: Boot from IFC may not be successful if IFC_CS3 is used. Workaround: If IFC_CS3 is used, gate IFC_CS3 while booting from NAND or NOR. Also Software should select IFC_CS3 using PMUXCR[26:27] = 0x01. Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-06-29 11:02:52 +00:00
#define CONFIG_SYS_FSL_ERRATUM_P1010_A003549
fsl_ifc: Add the workaround for erratum IFC A-003399(enabled on P1010) Issue: Address masking doesn't work properly. When sum of the base address, defined by BA, and memory bank size, defined by AM, exceeds 4GB (0xffff_ffff) then AMASKn[AM] doesn't mask CSPRn[BA] bits. Impact: This will impact booting when we are reprogramming CSPR0(BA) and AMASK0(AMASK) while executing from NOR Flash. Workaround: Re-programming of CSPR(BA) and AMASK is done while not executing from NOR Flash. The code which programs the BA and AMASK is executed from L2-SRAM. Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-07-07 15:06:47 +00:00
#define CONFIG_SYS_FSL_ERRATUM_IFC_A003399
powerpc/8xxx: Introduce 85xx, 86xx, QorIQ config headers Add new headers that capture common defines for a given SoC/processor rather than duplicating that information in board config.h and random other places. Eventually this should be handled by Kconfig & defconfigs Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Acked-by: Wolfgang Denk <wd@denx.de>
2011-01-19 09:05:26 +00:00
powerpc/85xx: Support for Freescale P1024/P1025 processor Add Support for Freescale P1024/P1025 (dual core) and P1015/P1016 (single core) processors. P1024 is a variant of P1020 processor with a core frequency from 400Mhz to 667Mhz and comes in a 561-pin wirebond power-BGA P1025 is a variant of P1021 processor with a core frequency from 400Mhz to 667Mhz and comes in a 561-pin wirebond power-BGA P1015 is a variant of P1024 processor with single core and P1016 is a variant of P1025 processor with single core. Added comments in config_mpc85xx.h to denote single core versions of processors. Signed-off-by: Jin Qing <b24347@freescale.com> Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-02-05 19:45:07 +00:00
/* P1015 is single core version of P1024 */
#elif defined(CONFIG_P1015)
#define CONFIG_MAX_CPUS 1
#define CONFIG_SYS_FSL_NUM_LAWS 12
powerpc/mpc85xx:Add debugger support for e500v2 SoC Freescale's e500v1 and e500v2 cores (used in mpc85xx chips) have some restrictions on external debugging (JTAG). So define CONFIG_SYS_PPC_E500_DEBUG_TLB to enable a temporary TLB entry to be used during boot to work around the limitations. Please refer doc/README.mpc85xx for more information Signed-off-by: Radu Lazarescu <radu.lazarescu@freescale.com> Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
2012-04-29 23:57:12 +00:00
#define CONFIG_SYS_PPC_E500_DEBUG_TLB 2
powerpc/85xx: Support for Freescale P1024/P1025 processor Add Support for Freescale P1024/P1025 (dual core) and P1015/P1016 (single core) processors. P1024 is a variant of P1020 processor with a core frequency from 400Mhz to 667Mhz and comes in a 561-pin wirebond power-BGA P1025 is a variant of P1021 processor with a core frequency from 400Mhz to 667Mhz and comes in a 561-pin wirebond power-BGA P1015 is a variant of P1024 processor with single core and P1016 is a variant of P1025 processor with single core. Added comments in config_mpc85xx.h to denote single core versions of processors. Signed-off-by: Jin Qing <b24347@freescale.com> Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-02-05 19:45:07 +00:00
#define CONFIG_TSECV2
#define CONFIG_FSL_PCIE_DISABLE_ASPM
#define CONFIG_SYS_FSL_SEC_COMPAT 2
powerpc/85xx: introduce and document CONFIG_SYS_CCSRBAR macros Introduce the CONFIG_SYS_CCSRBAR_PHYS_HIGH and CONFIG_SYS_CCSRBAR_PHYS_LOW macros, which contain the high and low portions of CONFIG_SYS_CCSRBAR_PHYS. This is necessary for the assembly-language code that relocates CCSR, since the assembler does not understand 64-bit constants. CONFIG_SYS_CCSRBAR_PHYS is automatically defined from the CONFIG_SYS_CCSRBAR_PHYS_HIGH and CONFIG_SYS_CCSRBAR_PHYS_LOW macros, so it should not be defined in a board header file. Similarly, CONFIG_SYS_CCSRBAR_DEFAULT is defined for each SOC in config_mpc85xx.h, so it should also not be defined in the board header file. CONFIG_SYS_CCSR_DO_NOT_RELOCATE is a "short-cut" macro that guarantees that CONFIG_SYS_CCSRBAR_PHYS is set to the same value as CONFIG_SYS_CCSRBAR_DEFAULT, and so CCSR will not be relocated. Since CONFIG_SYS_CCSRBAR_DEFAULT is locked to a fixed value, multi-stage U-Boot builds (e.g. NAND) are required to relocate CCSR only during the last stage (i.e. the "real" U-Boot). All other stages should define CONFIG_SYS_CCSR_DO_NOT_RELOCATE to ensure that CCSR is not relocated. README is updated with descriptions of all the CONFIG_SYS_CCSRBAR_xxx macros. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-08-04 23:03:41 +00:00
#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000
powerpc/85xx: Support for Freescale P1024/P1025 processor Add Support for Freescale P1024/P1025 (dual core) and P1015/P1016 (single core) processors. P1024 is a variant of P1020 processor with a core frequency from 400Mhz to 667Mhz and comes in a 561-pin wirebond power-BGA P1025 is a variant of P1021 processor with a core frequency from 400Mhz to 667Mhz and comes in a 561-pin wirebond power-BGA P1015 is a variant of P1024 processor with single core and P1016 is a variant of P1025 processor with single core. Added comments in config_mpc85xx.h to denote single core versions of processors. Signed-off-by: Jin Qing <b24347@freescale.com> Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-02-05 19:45:07 +00:00
#define CONFIG_SYS_FSL_ERRATUM_ELBC_A001
#define CONFIG_SYS_FSL_ERRATUM_ESDHC111
/* P1016 is single core version of P1025 */
#elif defined(CONFIG_P1016)
#define CONFIG_MAX_CPUS 1
#define CONFIG_SYS_FSL_NUM_LAWS 12
powerpc/mpc85xx:Add debugger support for e500v2 SoC Freescale's e500v1 and e500v2 cores (used in mpc85xx chips) have some restrictions on external debugging (JTAG). So define CONFIG_SYS_PPC_E500_DEBUG_TLB to enable a temporary TLB entry to be used during boot to work around the limitations. Please refer doc/README.mpc85xx for more information Signed-off-by: Radu Lazarescu <radu.lazarescu@freescale.com> Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
2012-04-29 23:57:12 +00:00
#define CONFIG_SYS_PPC_E500_DEBUG_TLB 2
powerpc/85xx: Support for Freescale P1024/P1025 processor Add Support for Freescale P1024/P1025 (dual core) and P1015/P1016 (single core) processors. P1024 is a variant of P1020 processor with a core frequency from 400Mhz to 667Mhz and comes in a 561-pin wirebond power-BGA P1025 is a variant of P1021 processor with a core frequency from 400Mhz to 667Mhz and comes in a 561-pin wirebond power-BGA P1015 is a variant of P1024 processor with single core and P1016 is a variant of P1025 processor with single core. Added comments in config_mpc85xx.h to denote single core versions of processors. Signed-off-by: Jin Qing <b24347@freescale.com> Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-02-05 19:45:07 +00:00
#define CONFIG_TSECV2
#define CONFIG_FSL_PCIE_DISABLE_ASPM
#define CONFIG_SYS_FSL_SEC_COMPAT 2
#define CONFIG_SYS_FSL_ERRATUM_ELBC_A001
#define CONFIG_SYS_FSL_ERRATUM_ESDHC111
powerpc/85xx: Add P1021 specific QE and UEC support P1021 has some QE pins which need to be set in pmuxcr register before using QE functions. In this patch, pin QE0 and QE3 are set for UCC1 and UCC5 in Eth mode. QE9 and QE12 are set for MII management. QE12 needs to be released after MII access because QE12 pin is muxed with LBCTL signal. Also added relevant QE support defines unique to P1021. The P1021 QE is shared on P1012, P1016, and P1025. Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-02-11 07:25:30 +00:00
#define QE_MURAM_SIZE 0x6000UL
#define MAX_QE_RISC 1
#define QE_NUM_OF_SNUM 28
powerpc/85xx: introduce and document CONFIG_SYS_CCSRBAR macros Introduce the CONFIG_SYS_CCSRBAR_PHYS_HIGH and CONFIG_SYS_CCSRBAR_PHYS_LOW macros, which contain the high and low portions of CONFIG_SYS_CCSRBAR_PHYS. This is necessary for the assembly-language code that relocates CCSR, since the assembler does not understand 64-bit constants. CONFIG_SYS_CCSRBAR_PHYS is automatically defined from the CONFIG_SYS_CCSRBAR_PHYS_HIGH and CONFIG_SYS_CCSRBAR_PHYS_LOW macros, so it should not be defined in a board header file. Similarly, CONFIG_SYS_CCSRBAR_DEFAULT is defined for each SOC in config_mpc85xx.h, so it should also not be defined in the board header file. CONFIG_SYS_CCSR_DO_NOT_RELOCATE is a "short-cut" macro that guarantees that CONFIG_SYS_CCSRBAR_PHYS is set to the same value as CONFIG_SYS_CCSRBAR_DEFAULT, and so CCSR will not be relocated. Since CONFIG_SYS_CCSRBAR_DEFAULT is locked to a fixed value, multi-stage U-Boot builds (e.g. NAND) are required to relocate CCSR only during the last stage (i.e. the "real" U-Boot). All other stages should define CONFIG_SYS_CCSR_DO_NOT_RELOCATE to ensure that CCSR is not relocated. README is updated with descriptions of all the CONFIG_SYS_CCSRBAR_xxx macros. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-08-04 23:03:41 +00:00
#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000
powerpc/85xx: Support for Freescale P1024/P1025 processor Add Support for Freescale P1024/P1025 (dual core) and P1015/P1016 (single core) processors. P1024 is a variant of P1020 processor with a core frequency from 400Mhz to 667Mhz and comes in a 561-pin wirebond power-BGA P1025 is a variant of P1021 processor with a core frequency from 400Mhz to 667Mhz and comes in a 561-pin wirebond power-BGA P1015 is a variant of P1024 processor with single core and P1016 is a variant of P1025 processor with single core. Added comments in config_mpc85xx.h to denote single core versions of processors. Signed-off-by: Jin Qing <b24347@freescale.com> Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-02-05 19:45:07 +00:00
/* P1017 is single core version of P1023 */
powerpc/85xx: Add support for Freescale P1023/P1017 Processors Add P1023 (dual core) & P1017 (single core) specific information: * SERDES Table * Added P1023/P1017 to cpu_type_list and SVR list (fixed issue with P1013 not being sorted correctly). * Added P1023/P1027 to config_mpc85xx.h * Added new LAW type introduced on P1023/P1017 * Updated a few immap register/defines unique to P1023/P1017 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-02-04 04:14:19 +00:00
#elif defined(CONFIG_P1017)
#define CONFIG_MAX_CPUS 1
#define CONFIG_SYS_FSL_NUM_LAWS 12
#define CONFIG_SYS_FSL_SEC_COMPAT 4
#define CONFIG_SYS_NUM_FMAN 1
#define CONFIG_SYS_NUM_FM1_DTSEC 2
#define CONFIG_NUM_DDR_CONTROLLERS 1
#define CONFIG_SYS_QMAN_NUM_PORTALS 3
#define CONFIG_SYS_BMAN_NUM_PORTALS 3
powerpc/85xx: Specify CONFIG_SYS_FM_MURAM_SIZE CONFIG_SYS_FM_MURAM_SIZE varies from SoC to SoC to specify it in config_mpc85xx.h for those parts with a Frame Manager. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-02-04 06:43:34 +00:00
#define CONFIG_SYS_FM_MURAM_SIZE 0x10000
powerpc/fsl_pci: Fix device tree fixups for newer platforms We assumed that only a small set of compatiable strings would be needed to find the PCIe device tree nodes to be fixed up. However on newer platforms the simple rules no longer work. We need to allow specifying the PCIe compatiable string for each individual SoC. We introduce CONFIG_SYS_FSL_PCIE_COMPAT for this purpose and set it if the default isn't sufficient. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-05-20 05:39:21 +00:00
#define CONFIG_SYS_FSL_PCIE_COMPAT "fsl,qoriq-pcie-v2.2"
powerpc/85xx: introduce and document CONFIG_SYS_CCSRBAR macros Introduce the CONFIG_SYS_CCSRBAR_PHYS_HIGH and CONFIG_SYS_CCSRBAR_PHYS_LOW macros, which contain the high and low portions of CONFIG_SYS_CCSRBAR_PHYS. This is necessary for the assembly-language code that relocates CCSR, since the assembler does not understand 64-bit constants. CONFIG_SYS_CCSRBAR_PHYS is automatically defined from the CONFIG_SYS_CCSRBAR_PHYS_HIGH and CONFIG_SYS_CCSRBAR_PHYS_LOW macros, so it should not be defined in a board header file. Similarly, CONFIG_SYS_CCSRBAR_DEFAULT is defined for each SOC in config_mpc85xx.h, so it should also not be defined in the board header file. CONFIG_SYS_CCSR_DO_NOT_RELOCATE is a "short-cut" macro that guarantees that CONFIG_SYS_CCSRBAR_PHYS is set to the same value as CONFIG_SYS_CCSRBAR_DEFAULT, and so CCSR will not be relocated. Since CONFIG_SYS_CCSRBAR_DEFAULT is locked to a fixed value, multi-stage U-Boot builds (e.g. NAND) are required to relocate CCSR only during the last stage (i.e. the "real" U-Boot). All other stages should define CONFIG_SYS_CCSR_DO_NOT_RELOCATE to ensure that CCSR is not relocated. README is updated with descriptions of all the CONFIG_SYS_CCSRBAR_xxx macros. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-08-04 23:03:41 +00:00
#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff600000
powerpc/85xx: Add support for Freescale P1023/P1017 Processors Add P1023 (dual core) & P1017 (single core) specific information: * SERDES Table * Added P1023/P1017 to cpu_type_list and SVR list (fixed issue with P1013 not being sorted correctly). * Added P1023/P1027 to config_mpc85xx.h * Added new LAW type introduced on P1023/P1017 * Updated a few immap register/defines unique to P1023/P1017 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-02-04 04:14:19 +00:00
powerpc/8xxx: Introduce 85xx, 86xx, QorIQ config headers Add new headers that capture common defines for a given SoC/processor rather than duplicating that information in board config.h and random other places. Eventually this should be handled by Kconfig & defconfigs Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Acked-by: Wolfgang Denk <wd@denx.de>
2011-01-19 09:05:26 +00:00
#elif defined(CONFIG_P1020)
#define CONFIG_MAX_CPUS 2
#define CONFIG_SYS_FSL_NUM_LAWS 12
powerpc/mpc85xx:Add debugger support for e500v2 SoC Freescale's e500v1 and e500v2 cores (used in mpc85xx chips) have some restrictions on external debugging (JTAG). So define CONFIG_SYS_PPC_E500_DEBUG_TLB to enable a temporary TLB entry to be used during boot to work around the limitations. Please refer doc/README.mpc85xx for more information Signed-off-by: Radu Lazarescu <radu.lazarescu@freescale.com> Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
2012-04-29 23:57:12 +00:00
#define CONFIG_SYS_PPC_E500_DEBUG_TLB 2
powerpc/8xxx: Introduce 85xx, 86xx, QorIQ config headers Add new headers that capture common defines for a given SoC/processor rather than duplicating that information in board config.h and random other places. Eventually this should be handled by Kconfig & defconfigs Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Acked-by: Wolfgang Denk <wd@denx.de>
2011-01-19 09:05:26 +00:00
#define CONFIG_TSECV2
powerpc/85xx: Handle PCIe initialization requires for P1021 class SoCs The P1011, P1012, P1015, P1016, P1020, P1021, P1024, & P1025 SoCs require that we initialize the SERDES registers if the lanes are configured for PCIe. Additionally these devices PCIe controller do not support ASPM and we have to explicitly disable it. Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-02-01 15:55:58 +00:00
#define CONFIG_FSL_PCIE_DISABLE_ASPM
powerpc/8xxx: Introduce 85xx, 86xx, QorIQ config headers Add new headers that capture common defines for a given SoC/processor rather than duplicating that information in board config.h and random other places. Eventually this should be handled by Kconfig & defconfigs Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Acked-by: Wolfgang Denk <wd@denx.de>
2011-01-19 09:05:26 +00:00
#define CONFIG_SYS_FSL_SEC_COMPAT 2
powerpc/85xx: introduce and document CONFIG_SYS_CCSRBAR macros Introduce the CONFIG_SYS_CCSRBAR_PHYS_HIGH and CONFIG_SYS_CCSRBAR_PHYS_LOW macros, which contain the high and low portions of CONFIG_SYS_CCSRBAR_PHYS. This is necessary for the assembly-language code that relocates CCSR, since the assembler does not understand 64-bit constants. CONFIG_SYS_CCSRBAR_PHYS is automatically defined from the CONFIG_SYS_CCSRBAR_PHYS_HIGH and CONFIG_SYS_CCSRBAR_PHYS_LOW macros, so it should not be defined in a board header file. Similarly, CONFIG_SYS_CCSRBAR_DEFAULT is defined for each SOC in config_mpc85xx.h, so it should also not be defined in the board header file. CONFIG_SYS_CCSR_DO_NOT_RELOCATE is a "short-cut" macro that guarantees that CONFIG_SYS_CCSRBAR_PHYS is set to the same value as CONFIG_SYS_CCSRBAR_DEFAULT, and so CCSR will not be relocated. Since CONFIG_SYS_CCSRBAR_DEFAULT is locked to a fixed value, multi-stage U-Boot builds (e.g. NAND) are required to relocate CCSR only during the last stage (i.e. the "real" U-Boot). All other stages should define CONFIG_SYS_CCSR_DO_NOT_RELOCATE to ensure that CCSR is not relocated. README is updated with descriptions of all the CONFIG_SYS_CCSRBAR_xxx macros. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-08-04 23:03:41 +00:00
#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000
powerpc/85xx: Support for Freescale P1024/P1025 processor Add Support for Freescale P1024/P1025 (dual core) and P1015/P1016 (single core) processors. P1024 is a variant of P1020 processor with a core frequency from 400Mhz to 667Mhz and comes in a 561-pin wirebond power-BGA P1025 is a variant of P1021 processor with a core frequency from 400Mhz to 667Mhz and comes in a 561-pin wirebond power-BGA P1015 is a variant of P1024 processor with single core and P1016 is a variant of P1025 processor with single core. Added comments in config_mpc85xx.h to denote single core versions of processors. Signed-off-by: Jin Qing <b24347@freescale.com> Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-02-05 19:45:07 +00:00
#define CONFIG_SYS_FSL_ERRATUM_ELBC_A001
#define CONFIG_SYS_FSL_ERRATUM_ESDHC111
powerpc/8xxx: Introduce 85xx, 86xx, QorIQ config headers Add new headers that capture common defines for a given SoC/processor rather than duplicating that information in board config.h and random other places. Eventually this should be handled by Kconfig & defconfigs Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Acked-by: Wolfgang Denk <wd@denx.de>
2011-01-19 09:05:26 +00:00
#elif defined(CONFIG_P1021)
#define CONFIG_MAX_CPUS 2
#define CONFIG_SYS_FSL_NUM_LAWS 12
powerpc/mpc85xx:Add debugger support for e500v2 SoC Freescale's e500v1 and e500v2 cores (used in mpc85xx chips) have some restrictions on external debugging (JTAG). So define CONFIG_SYS_PPC_E500_DEBUG_TLB to enable a temporary TLB entry to be used during boot to work around the limitations. Please refer doc/README.mpc85xx for more information Signed-off-by: Radu Lazarescu <radu.lazarescu@freescale.com> Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
2012-04-29 23:57:12 +00:00
#define CONFIG_SYS_PPC_E500_DEBUG_TLB 2
powerpc/8xxx: Introduce 85xx, 86xx, QorIQ config headers Add new headers that capture common defines for a given SoC/processor rather than duplicating that information in board config.h and random other places. Eventually this should be handled by Kconfig & defconfigs Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Acked-by: Wolfgang Denk <wd@denx.de>
2011-01-19 09:05:26 +00:00
#define CONFIG_TSECV2
powerpc/85xx: Handle PCIe initialization requires for P1021 class SoCs The P1011, P1012, P1015, P1016, P1020, P1021, P1024, & P1025 SoCs require that we initialize the SERDES registers if the lanes are configured for PCIe. Additionally these devices PCIe controller do not support ASPM and we have to explicitly disable it. Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-02-01 15:55:58 +00:00
#define CONFIG_FSL_PCIE_DISABLE_ASPM
powerpc/8xxx: Introduce 85xx, 86xx, QorIQ config headers Add new headers that capture common defines for a given SoC/processor rather than duplicating that information in board config.h and random other places. Eventually this should be handled by Kconfig & defconfigs Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Acked-by: Wolfgang Denk <wd@denx.de>
2011-01-19 09:05:26 +00:00
#define CONFIG_SYS_FSL_SEC_COMPAT 2
powerpc/85xx: introduce and document CONFIG_SYS_CCSRBAR macros Introduce the CONFIG_SYS_CCSRBAR_PHYS_HIGH and CONFIG_SYS_CCSRBAR_PHYS_LOW macros, which contain the high and low portions of CONFIG_SYS_CCSRBAR_PHYS. This is necessary for the assembly-language code that relocates CCSR, since the assembler does not understand 64-bit constants. CONFIG_SYS_CCSRBAR_PHYS is automatically defined from the CONFIG_SYS_CCSRBAR_PHYS_HIGH and CONFIG_SYS_CCSRBAR_PHYS_LOW macros, so it should not be defined in a board header file. Similarly, CONFIG_SYS_CCSRBAR_DEFAULT is defined for each SOC in config_mpc85xx.h, so it should also not be defined in the board header file. CONFIG_SYS_CCSR_DO_NOT_RELOCATE is a "short-cut" macro that guarantees that CONFIG_SYS_CCSRBAR_PHYS is set to the same value as CONFIG_SYS_CCSRBAR_DEFAULT, and so CCSR will not be relocated. Since CONFIG_SYS_CCSRBAR_DEFAULT is locked to a fixed value, multi-stage U-Boot builds (e.g. NAND) are required to relocate CCSR only during the last stage (i.e. the "real" U-Boot). All other stages should define CONFIG_SYS_CCSR_DO_NOT_RELOCATE to ensure that CCSR is not relocated. README is updated with descriptions of all the CONFIG_SYS_CCSRBAR_xxx macros. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-08-04 23:03:41 +00:00
#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000
powerpc/85xx: Support for Freescale P1024/P1025 processor Add Support for Freescale P1024/P1025 (dual core) and P1015/P1016 (single core) processors. P1024 is a variant of P1020 processor with a core frequency from 400Mhz to 667Mhz and comes in a 561-pin wirebond power-BGA P1025 is a variant of P1021 processor with a core frequency from 400Mhz to 667Mhz and comes in a 561-pin wirebond power-BGA P1015 is a variant of P1024 processor with single core and P1016 is a variant of P1025 processor with single core. Added comments in config_mpc85xx.h to denote single core versions of processors. Signed-off-by: Jin Qing <b24347@freescale.com> Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-02-05 19:45:07 +00:00
#define CONFIG_SYS_FSL_ERRATUM_ELBC_A001
#define CONFIG_SYS_FSL_ERRATUM_ESDHC111
powerpc/85xx: Add P1021 specific QE and UEC support P1021 has some QE pins which need to be set in pmuxcr register before using QE functions. In this patch, pin QE0 and QE3 are set for UCC1 and UCC5 in Eth mode. QE9 and QE12 are set for MII management. QE12 needs to be released after MII access because QE12 pin is muxed with LBCTL signal. Also added relevant QE support defines unique to P1021. The P1021 QE is shared on P1012, P1016, and P1025. Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-02-11 07:25:30 +00:00
#define QE_MURAM_SIZE 0x6000UL
#define MAX_QE_RISC 1
#define QE_NUM_OF_SNUM 28
powerpc/8xxx: Introduce 85xx, 86xx, QorIQ config headers Add new headers that capture common defines for a given SoC/processor rather than duplicating that information in board config.h and random other places. Eventually this should be handled by Kconfig & defconfigs Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Acked-by: Wolfgang Denk <wd@denx.de>
2011-01-19 09:05:26 +00:00
#elif defined(CONFIG_P1022)
#define CONFIG_MAX_CPUS 2
#define CONFIG_SYS_FSL_NUM_LAWS 12
powerpc/mpc85xx:Add debugger support for e500v2 SoC Freescale's e500v1 and e500v2 cores (used in mpc85xx chips) have some restrictions on external debugging (JTAG). So define CONFIG_SYS_PPC_E500_DEBUG_TLB to enable a temporary TLB entry to be used during boot to work around the limitations. Please refer doc/README.mpc85xx for more information Signed-off-by: Radu Lazarescu <radu.lazarescu@freescale.com> Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
2012-04-29 23:57:12 +00:00
#define CONFIG_SYS_PPC_E500_DEBUG_TLB 2
powerpc/8xxx: Introduce 85xx, 86xx, QorIQ config headers Add new headers that capture common defines for a given SoC/processor rather than duplicating that information in board config.h and random other places. Eventually this should be handled by Kconfig & defconfigs Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Acked-by: Wolfgang Denk <wd@denx.de>
2011-01-19 09:05:26 +00:00
#define CONFIG_TSECV2
#define CONFIG_SYS_FSL_SEC_COMPAT 2
powerpc/85xx: CONFIG_FSL_SATA_V2 should be defined in config_mpc85xx.h Macro CONFIG_FSL_SATA_V2 is defined if the SOC has a V2 Freescale SATA controller, so it should be defined in config_mpc85xx.h instead of the various board header files. So now CONFIG_FSL_SATA_V2 is always defined on the P1013, P1022, P2041, P3041, P5010, and P5020. It was already defined for the P1010 and P1014. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-11-21 23:10:22 +00:00
#define CONFIG_FSL_SATA_V2
powerpc/85xx: introduce and document CONFIG_SYS_CCSRBAR macros Introduce the CONFIG_SYS_CCSRBAR_PHYS_HIGH and CONFIG_SYS_CCSRBAR_PHYS_LOW macros, which contain the high and low portions of CONFIG_SYS_CCSRBAR_PHYS. This is necessary for the assembly-language code that relocates CCSR, since the assembler does not understand 64-bit constants. CONFIG_SYS_CCSRBAR_PHYS is automatically defined from the CONFIG_SYS_CCSRBAR_PHYS_HIGH and CONFIG_SYS_CCSRBAR_PHYS_LOW macros, so it should not be defined in a board header file. Similarly, CONFIG_SYS_CCSRBAR_DEFAULT is defined for each SOC in config_mpc85xx.h, so it should also not be defined in the board header file. CONFIG_SYS_CCSR_DO_NOT_RELOCATE is a "short-cut" macro that guarantees that CONFIG_SYS_CCSRBAR_PHYS is set to the same value as CONFIG_SYS_CCSRBAR_DEFAULT, and so CCSR will not be relocated. Since CONFIG_SYS_CCSRBAR_DEFAULT is locked to a fixed value, multi-stage U-Boot builds (e.g. NAND) are required to relocate CCSR only during the last stage (i.e. the "real" U-Boot). All other stages should define CONFIG_SYS_CCSR_DO_NOT_RELOCATE to ensure that CCSR is not relocated. README is updated with descriptions of all the CONFIG_SYS_CCSRBAR_xxx macros. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-08-04 23:03:41 +00:00
#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000
powerpc/85xx: Enable various errata on P1022/P1013 SoCs Enable workaround for errata ELBC A001, ESDHC 111 & SATA A001 on P1022/P1013 SoCs. Also updated P1022DS config to properly enable CONFIG_FSL_SATA_V2. Signed-off-by: Jiang Yutang <b14898@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-01-30 23:06:20 +00:00
#define CONFIG_SYS_FSL_ERRATUM_ELBC_A001
#define CONFIG_SYS_FSL_ERRATUM_ESDHC111
#define CONFIG_FSL_SATA_ERRATUM_A001
powerpc/8xxx: Introduce 85xx, 86xx, QorIQ config headers Add new headers that capture common defines for a given SoC/processor rather than duplicating that information in board config.h and random other places. Eventually this should be handled by Kconfig & defconfigs Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Acked-by: Wolfgang Denk <wd@denx.de>
2011-01-19 09:05:26 +00:00
powerpc/85xx: Add support for Freescale P1023/P1017 Processors Add P1023 (dual core) & P1017 (single core) specific information: * SERDES Table * Added P1023/P1017 to cpu_type_list and SVR list (fixed issue with P1013 not being sorted correctly). * Added P1023/P1027 to config_mpc85xx.h * Added new LAW type introduced on P1023/P1017 * Updated a few immap register/defines unique to P1023/P1017 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-02-04 04:14:19 +00:00
#elif defined(CONFIG_P1023)
#define CONFIG_MAX_CPUS 2
#define CONFIG_SYS_FSL_NUM_LAWS 12
#define CONFIG_SYS_FSL_SEC_COMPAT 4
#define CONFIG_SYS_NUM_FMAN 1
#define CONFIG_SYS_NUM_FM1_DTSEC 2
#define CONFIG_NUM_DDR_CONTROLLERS 1
#define CONFIG_SYS_QMAN_NUM_PORTALS 3
#define CONFIG_SYS_BMAN_NUM_PORTALS 3
powerpc/85xx: Specify CONFIG_SYS_FM_MURAM_SIZE CONFIG_SYS_FM_MURAM_SIZE varies from SoC to SoC to specify it in config_mpc85xx.h for those parts with a Frame Manager. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-02-04 06:43:34 +00:00
#define CONFIG_SYS_FM_MURAM_SIZE 0x10000
powerpc/fsl_pci: Fix device tree fixups for newer platforms We assumed that only a small set of compatiable strings would be needed to find the PCIe device tree nodes to be fixed up. However on newer platforms the simple rules no longer work. We need to allow specifying the PCIe compatiable string for each individual SoC. We introduce CONFIG_SYS_FSL_PCIE_COMPAT for this purpose and set it if the default isn't sufficient. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-05-20 05:39:21 +00:00
#define CONFIG_SYS_FSL_PCIE_COMPAT "fsl,qoriq-pcie-v2.2"
powerpc/85xx: introduce and document CONFIG_SYS_CCSRBAR macros Introduce the CONFIG_SYS_CCSRBAR_PHYS_HIGH and CONFIG_SYS_CCSRBAR_PHYS_LOW macros, which contain the high and low portions of CONFIG_SYS_CCSRBAR_PHYS. This is necessary for the assembly-language code that relocates CCSR, since the assembler does not understand 64-bit constants. CONFIG_SYS_CCSRBAR_PHYS is automatically defined from the CONFIG_SYS_CCSRBAR_PHYS_HIGH and CONFIG_SYS_CCSRBAR_PHYS_LOW macros, so it should not be defined in a board header file. Similarly, CONFIG_SYS_CCSRBAR_DEFAULT is defined for each SOC in config_mpc85xx.h, so it should also not be defined in the board header file. CONFIG_SYS_CCSR_DO_NOT_RELOCATE is a "short-cut" macro that guarantees that CONFIG_SYS_CCSRBAR_PHYS is set to the same value as CONFIG_SYS_CCSRBAR_DEFAULT, and so CCSR will not be relocated. Since CONFIG_SYS_CCSRBAR_DEFAULT is locked to a fixed value, multi-stage U-Boot builds (e.g. NAND) are required to relocate CCSR only during the last stage (i.e. the "real" U-Boot). All other stages should define CONFIG_SYS_CCSR_DO_NOT_RELOCATE to ensure that CCSR is not relocated. README is updated with descriptions of all the CONFIG_SYS_CCSRBAR_xxx macros. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-08-04 23:03:41 +00:00
#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff600000
powerpc/85xx: Add support for Freescale P1023/P1017 Processors Add P1023 (dual core) & P1017 (single core) specific information: * SERDES Table * Added P1023/P1017 to cpu_type_list and SVR list (fixed issue with P1013 not being sorted correctly). * Added P1023/P1027 to config_mpc85xx.h * Added new LAW type introduced on P1023/P1017 * Updated a few immap register/defines unique to P1023/P1017 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-02-04 04:14:19 +00:00
powerpc/85xx: Support for Freescale P1024/P1025 processor Add Support for Freescale P1024/P1025 (dual core) and P1015/P1016 (single core) processors. P1024 is a variant of P1020 processor with a core frequency from 400Mhz to 667Mhz and comes in a 561-pin wirebond power-BGA P1025 is a variant of P1021 processor with a core frequency from 400Mhz to 667Mhz and comes in a 561-pin wirebond power-BGA P1015 is a variant of P1024 processor with single core and P1016 is a variant of P1025 processor with single core. Added comments in config_mpc85xx.h to denote single core versions of processors. Signed-off-by: Jin Qing <b24347@freescale.com> Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-02-05 19:45:07 +00:00
/* P1024 is lower end variant of P1020 */
#elif defined(CONFIG_P1024)
#define CONFIG_MAX_CPUS 2
#define CONFIG_SYS_FSL_NUM_LAWS 12
powerpc/mpc85xx:Add debugger support for e500v2 SoC Freescale's e500v1 and e500v2 cores (used in mpc85xx chips) have some restrictions on external debugging (JTAG). So define CONFIG_SYS_PPC_E500_DEBUG_TLB to enable a temporary TLB entry to be used during boot to work around the limitations. Please refer doc/README.mpc85xx for more information Signed-off-by: Radu Lazarescu <radu.lazarescu@freescale.com> Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
2012-04-29 23:57:12 +00:00
#define CONFIG_SYS_PPC_E500_DEBUG_TLB 2
powerpc/85xx: Support for Freescale P1024/P1025 processor Add Support for Freescale P1024/P1025 (dual core) and P1015/P1016 (single core) processors. P1024 is a variant of P1020 processor with a core frequency from 400Mhz to 667Mhz and comes in a 561-pin wirebond power-BGA P1025 is a variant of P1021 processor with a core frequency from 400Mhz to 667Mhz and comes in a 561-pin wirebond power-BGA P1015 is a variant of P1024 processor with single core and P1016 is a variant of P1025 processor with single core. Added comments in config_mpc85xx.h to denote single core versions of processors. Signed-off-by: Jin Qing <b24347@freescale.com> Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-02-05 19:45:07 +00:00
#define CONFIG_TSECV2
#define CONFIG_FSL_PCIE_DISABLE_ASPM
#define CONFIG_SYS_FSL_SEC_COMPAT 2
powerpc/85xx: introduce and document CONFIG_SYS_CCSRBAR macros Introduce the CONFIG_SYS_CCSRBAR_PHYS_HIGH and CONFIG_SYS_CCSRBAR_PHYS_LOW macros, which contain the high and low portions of CONFIG_SYS_CCSRBAR_PHYS. This is necessary for the assembly-language code that relocates CCSR, since the assembler does not understand 64-bit constants. CONFIG_SYS_CCSRBAR_PHYS is automatically defined from the CONFIG_SYS_CCSRBAR_PHYS_HIGH and CONFIG_SYS_CCSRBAR_PHYS_LOW macros, so it should not be defined in a board header file. Similarly, CONFIG_SYS_CCSRBAR_DEFAULT is defined for each SOC in config_mpc85xx.h, so it should also not be defined in the board header file. CONFIG_SYS_CCSR_DO_NOT_RELOCATE is a "short-cut" macro that guarantees that CONFIG_SYS_CCSRBAR_PHYS is set to the same value as CONFIG_SYS_CCSRBAR_DEFAULT, and so CCSR will not be relocated. Since CONFIG_SYS_CCSRBAR_DEFAULT is locked to a fixed value, multi-stage U-Boot builds (e.g. NAND) are required to relocate CCSR only during the last stage (i.e. the "real" U-Boot). All other stages should define CONFIG_SYS_CCSR_DO_NOT_RELOCATE to ensure that CCSR is not relocated. README is updated with descriptions of all the CONFIG_SYS_CCSRBAR_xxx macros. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-08-04 23:03:41 +00:00
#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000
powerpc/85xx: Support for Freescale P1024/P1025 processor Add Support for Freescale P1024/P1025 (dual core) and P1015/P1016 (single core) processors. P1024 is a variant of P1020 processor with a core frequency from 400Mhz to 667Mhz and comes in a 561-pin wirebond power-BGA P1025 is a variant of P1021 processor with a core frequency from 400Mhz to 667Mhz and comes in a 561-pin wirebond power-BGA P1015 is a variant of P1024 processor with single core and P1016 is a variant of P1025 processor with single core. Added comments in config_mpc85xx.h to denote single core versions of processors. Signed-off-by: Jin Qing <b24347@freescale.com> Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-02-05 19:45:07 +00:00
#define CONFIG_SYS_FSL_ERRATUM_ELBC_A001
#define CONFIG_SYS_FSL_ERRATUM_ESDHC111
/* P1025 is lower end variant of P1021 */
#elif defined(CONFIG_P1025)
#define CONFIG_MAX_CPUS 2
#define CONFIG_SYS_FSL_NUM_LAWS 12
powerpc/mpc85xx:Add debugger support for e500v2 SoC Freescale's e500v1 and e500v2 cores (used in mpc85xx chips) have some restrictions on external debugging (JTAG). So define CONFIG_SYS_PPC_E500_DEBUG_TLB to enable a temporary TLB entry to be used during boot to work around the limitations. Please refer doc/README.mpc85xx for more information Signed-off-by: Radu Lazarescu <radu.lazarescu@freescale.com> Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
2012-04-29 23:57:12 +00:00
#define CONFIG_SYS_PPC_E500_DEBUG_TLB 2
powerpc/85xx: Support for Freescale P1024/P1025 processor Add Support for Freescale P1024/P1025 (dual core) and P1015/P1016 (single core) processors. P1024 is a variant of P1020 processor with a core frequency from 400Mhz to 667Mhz and comes in a 561-pin wirebond power-BGA P1025 is a variant of P1021 processor with a core frequency from 400Mhz to 667Mhz and comes in a 561-pin wirebond power-BGA P1015 is a variant of P1024 processor with single core and P1016 is a variant of P1025 processor with single core. Added comments in config_mpc85xx.h to denote single core versions of processors. Signed-off-by: Jin Qing <b24347@freescale.com> Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-02-05 19:45:07 +00:00
#define CONFIG_TSECV2
#define CONFIG_FSL_PCIE_DISABLE_ASPM
#define CONFIG_SYS_FSL_SEC_COMPAT 2
powerpc/85xx: introduce and document CONFIG_SYS_CCSRBAR macros Introduce the CONFIG_SYS_CCSRBAR_PHYS_HIGH and CONFIG_SYS_CCSRBAR_PHYS_LOW macros, which contain the high and low portions of CONFIG_SYS_CCSRBAR_PHYS. This is necessary for the assembly-language code that relocates CCSR, since the assembler does not understand 64-bit constants. CONFIG_SYS_CCSRBAR_PHYS is automatically defined from the CONFIG_SYS_CCSRBAR_PHYS_HIGH and CONFIG_SYS_CCSRBAR_PHYS_LOW macros, so it should not be defined in a board header file. Similarly, CONFIG_SYS_CCSRBAR_DEFAULT is defined for each SOC in config_mpc85xx.h, so it should also not be defined in the board header file. CONFIG_SYS_CCSR_DO_NOT_RELOCATE is a "short-cut" macro that guarantees that CONFIG_SYS_CCSRBAR_PHYS is set to the same value as CONFIG_SYS_CCSRBAR_DEFAULT, and so CCSR will not be relocated. Since CONFIG_SYS_CCSRBAR_DEFAULT is locked to a fixed value, multi-stage U-Boot builds (e.g. NAND) are required to relocate CCSR only during the last stage (i.e. the "real" U-Boot). All other stages should define CONFIG_SYS_CCSR_DO_NOT_RELOCATE to ensure that CCSR is not relocated. README is updated with descriptions of all the CONFIG_SYS_CCSRBAR_xxx macros. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-08-04 23:03:41 +00:00
#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000
powerpc/85xx: Support for Freescale P1024/P1025 processor Add Support for Freescale P1024/P1025 (dual core) and P1015/P1016 (single core) processors. P1024 is a variant of P1020 processor with a core frequency from 400Mhz to 667Mhz and comes in a 561-pin wirebond power-BGA P1025 is a variant of P1021 processor with a core frequency from 400Mhz to 667Mhz and comes in a 561-pin wirebond power-BGA P1015 is a variant of P1024 processor with single core and P1016 is a variant of P1025 processor with single core. Added comments in config_mpc85xx.h to denote single core versions of processors. Signed-off-by: Jin Qing <b24347@freescale.com> Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-02-05 19:45:07 +00:00
#define CONFIG_SYS_FSL_ERRATUM_ELBC_A001
#define CONFIG_SYS_FSL_ERRATUM_ESDHC111
powerpc/85xx: Add P1021 specific QE and UEC support P1021 has some QE pins which need to be set in pmuxcr register before using QE functions. In this patch, pin QE0 and QE3 are set for UCC1 and UCC5 in Eth mode. QE9 and QE12 are set for MII management. QE12 needs to be released after MII access because QE12 pin is muxed with LBCTL signal. Also added relevant QE support defines unique to P1021. The P1021 QE is shared on P1012, P1016, and P1025. Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-02-11 07:25:30 +00:00
#define QE_MURAM_SIZE 0x6000UL
#define MAX_QE_RISC 1
#define QE_NUM_OF_SNUM 28
powerpc/85xx: Support for Freescale P1024/P1025 processor Add Support for Freescale P1024/P1025 (dual core) and P1015/P1016 (single core) processors. P1024 is a variant of P1020 processor with a core frequency from 400Mhz to 667Mhz and comes in a 561-pin wirebond power-BGA P1025 is a variant of P1021 processor with a core frequency from 400Mhz to 667Mhz and comes in a 561-pin wirebond power-BGA P1015 is a variant of P1024 processor with single core and P1016 is a variant of P1025 processor with single core. Added comments in config_mpc85xx.h to denote single core versions of processors. Signed-off-by: Jin Qing <b24347@freescale.com> Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-02-05 19:45:07 +00:00
/* P2010 is single core version of P2020 */
powerpc/8xxx: Introduce 85xx, 86xx, QorIQ config headers Add new headers that capture common defines for a given SoC/processor rather than duplicating that information in board config.h and random other places. Eventually this should be handled by Kconfig & defconfigs Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Acked-by: Wolfgang Denk <wd@denx.de>
2011-01-19 09:05:26 +00:00
#elif defined(CONFIG_P2010)
#define CONFIG_MAX_CPUS 1
#define CONFIG_SYS_FSL_NUM_LAWS 12
powerpc/mpc85xx:Add debugger support for e500v2 SoC Freescale's e500v1 and e500v2 cores (used in mpc85xx chips) have some restrictions on external debugging (JTAG). So define CONFIG_SYS_PPC_E500_DEBUG_TLB to enable a temporary TLB entry to be used during boot to work around the limitations. Please refer doc/README.mpc85xx for more information Signed-off-by: Radu Lazarescu <radu.lazarescu@freescale.com> Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
2012-04-29 23:57:12 +00:00
#define CONFIG_SYS_PPC_E500_DEBUG_TLB 2
powerpc/8xxx: Introduce 85xx, 86xx, QorIQ config headers Add new headers that capture common defines for a given SoC/processor rather than duplicating that information in board config.h and random other places. Eventually this should be handled by Kconfig & defconfigs Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Acked-by: Wolfgang Denk <wd@denx.de>
2011-01-19 09:05:26 +00:00
#define CONFIG_SYS_FSL_SEC_COMPAT 2
powerpc/85xx: introduce and document CONFIG_SYS_CCSRBAR macros Introduce the CONFIG_SYS_CCSRBAR_PHYS_HIGH and CONFIG_SYS_CCSRBAR_PHYS_LOW macros, which contain the high and low portions of CONFIG_SYS_CCSRBAR_PHYS. This is necessary for the assembly-language code that relocates CCSR, since the assembler does not understand 64-bit constants. CONFIG_SYS_CCSRBAR_PHYS is automatically defined from the CONFIG_SYS_CCSRBAR_PHYS_HIGH and CONFIG_SYS_CCSRBAR_PHYS_LOW macros, so it should not be defined in a board header file. Similarly, CONFIG_SYS_CCSRBAR_DEFAULT is defined for each SOC in config_mpc85xx.h, so it should also not be defined in the board header file. CONFIG_SYS_CCSR_DO_NOT_RELOCATE is a "short-cut" macro that guarantees that CONFIG_SYS_CCSRBAR_PHYS is set to the same value as CONFIG_SYS_CCSRBAR_DEFAULT, and so CCSR will not be relocated. Since CONFIG_SYS_CCSRBAR_DEFAULT is locked to a fixed value, multi-stage U-Boot builds (e.g. NAND) are required to relocate CCSR only during the last stage (i.e. the "real" U-Boot). All other stages should define CONFIG_SYS_CCSR_DO_NOT_RELOCATE to ensure that CCSR is not relocated. README is updated with descriptions of all the CONFIG_SYS_CCSRBAR_xxx macros. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-08-04 23:03:41 +00:00
#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000
powerpc/85xx: Enable ESDHC111 Erratum on P2010/P2020 SoCs Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-01-26 07:43:15 +00:00
#define CONFIG_SYS_FSL_ERRATUM_ESDHC111
fsl_esdhc: Add the workaround for erratum ESDHC-A001 (enable on P2020) Data timeout counter (SYSCTL[DTOCV]) is not reliable for values of 4, 8, and 12. Program one more than the desired value: 4 -> 5, 8 -> 9, 12 -> 13. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-01-29 21:36:10 +00:00
#define CONFIG_SYS_FSL_ERRATUM_ESDHC_A001
powerpc/8xxx: Introduce 85xx, 86xx, QorIQ config headers Add new headers that capture common defines for a given SoC/processor rather than duplicating that information in board config.h and random other places. Eventually this should be handled by Kconfig & defconfigs Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Acked-by: Wolfgang Denk <wd@denx.de>
2011-01-19 09:05:26 +00:00
#elif defined(CONFIG_P2020)
#define CONFIG_MAX_CPUS 2
#define CONFIG_SYS_FSL_NUM_LAWS 12
powerpc/mpc85xx:Add debugger support for e500v2 SoC Freescale's e500v1 and e500v2 cores (used in mpc85xx chips) have some restrictions on external debugging (JTAG). So define CONFIG_SYS_PPC_E500_DEBUG_TLB to enable a temporary TLB entry to be used during boot to work around the limitations. Please refer doc/README.mpc85xx for more information Signed-off-by: Radu Lazarescu <radu.lazarescu@freescale.com> Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
2012-04-29 23:57:12 +00:00
#define CONFIG_SYS_PPC_E500_DEBUG_TLB 2
powerpc/8xxx: Introduce 85xx, 86xx, QorIQ config headers Add new headers that capture common defines for a given SoC/processor rather than duplicating that information in board config.h and random other places. Eventually this should be handled by Kconfig & defconfigs Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Acked-by: Wolfgang Denk <wd@denx.de>
2011-01-19 09:05:26 +00:00
#define CONFIG_SYS_FSL_SEC_COMPAT 2
powerpc/85xx: introduce and document CONFIG_SYS_CCSRBAR macros Introduce the CONFIG_SYS_CCSRBAR_PHYS_HIGH and CONFIG_SYS_CCSRBAR_PHYS_LOW macros, which contain the high and low portions of CONFIG_SYS_CCSRBAR_PHYS. This is necessary for the assembly-language code that relocates CCSR, since the assembler does not understand 64-bit constants. CONFIG_SYS_CCSRBAR_PHYS is automatically defined from the CONFIG_SYS_CCSRBAR_PHYS_HIGH and CONFIG_SYS_CCSRBAR_PHYS_LOW macros, so it should not be defined in a board header file. Similarly, CONFIG_SYS_CCSRBAR_DEFAULT is defined for each SOC in config_mpc85xx.h, so it should also not be defined in the board header file. CONFIG_SYS_CCSR_DO_NOT_RELOCATE is a "short-cut" macro that guarantees that CONFIG_SYS_CCSRBAR_PHYS is set to the same value as CONFIG_SYS_CCSRBAR_DEFAULT, and so CCSR will not be relocated. Since CONFIG_SYS_CCSRBAR_DEFAULT is locked to a fixed value, multi-stage U-Boot builds (e.g. NAND) are required to relocate CCSR only during the last stage (i.e. the "real" U-Boot). All other stages should define CONFIG_SYS_CCSR_DO_NOT_RELOCATE to ensure that CCSR is not relocated. README is updated with descriptions of all the CONFIG_SYS_CCSRBAR_xxx macros. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-08-04 23:03:41 +00:00
#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000
powerpc/85xx: Enable ESDHC111 Erratum on P2010/P2020 SoCs Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-01-26 07:43:15 +00:00
#define CONFIG_SYS_FSL_ERRATUM_ESDHC111
fsl_esdhc: Add the workaround for erratum ESDHC-A001 (enable on P2020) Data timeout counter (SYSCTL[DTOCV]) is not reliable for values of 4, 8, and 12. Program one more than the desired value: 4 -> 5, 8 -> 9, 12 -> 13. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-01-29 21:36:10 +00:00
#define CONFIG_SYS_FSL_ERRATUM_ESDHC_A001
powerpc/srio: Rewrite the struct ccsr_rio Rewrite this struct for the support of two ports and two message units registers. Signed-off-by: Liu Gang <Gang.Liu@freescale.com>
2012-03-08 00:33:14 +00:00
#define CONFIG_SYS_FSL_SRIO_MAX_PORTS 2
#define CONFIG_SYS_FSL_SRIO_OB_WIN_NUM 9
#define CONFIG_SYS_FSL_SRIO_IB_WIN_NUM 5
#define CONFIG_SYS_FSL_RMU
#define CONFIG_SYS_FSL_SRIO_MSG_UNIT_NUM 2
powerpc/8xxx: Introduce 85xx, 86xx, QorIQ config headers Add new headers that capture common defines for a given SoC/processor rather than duplicating that information in board config.h and random other places. Eventually this should be handled by Kconfig & defconfigs Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Acked-by: Wolfgang Denk <wd@denx.de>
2011-01-19 09:05:26 +00:00
#elif defined(CONFIG_PPC_P2040)
#define CONFIG_MAX_CPUS 4
powerpc/85xx: Fixup determining PME, FMan freq On CoreNet based SoCs (P2040, P3041, P4080, P5020) we have some additional rules to determining the various frequencies that PME & FMan IP blocks run at. We need to take into account: * Reduced number of Core Complex PLL clusters * HWA_ASYNC_DIV (allows for /2 or /4 options) On P2040/P3041/P5020 we only have 2 Core Complex PLLs and in such SoCs the PME & FMan blocks utilize the second Core Complex PLL. On SoCs like p4080 with 4 Core Complex PLLs we utilize the third Core Complex PLL for PME & FMan blocks. On P2040/P3041/P5020 we have the added feature that we can divide the PLL down further by either /2 or /4 based on HWA_ASYNC_DIV. On P4080 this options doesn't exist, however HWA_ASYNC_DIV field in RCW should be set to 0 and this gets a backward compatiable /2 behavior. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-02-16 08:03:29 +00:00
#define CONFIG_SYS_FSL_NUM_CC_PLLS 2
powerpc/8xxx: Introduce 85xx, 86xx, QorIQ config headers Add new headers that capture common defines for a given SoC/processor rather than duplicating that information in board config.h and random other places. Eventually this should be handled by Kconfig & defconfigs Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Acked-by: Wolfgang Denk <wd@denx.de>
2011-01-19 09:05:26 +00:00
#define CONFIG_SYS_FSL_NUM_LAWS 32
#define CONFIG_SYS_FSL_SEC_COMPAT 4
powerpc/85xx: Add some defines for P2040, P3041, P5010, P5020 Specify the number of DDR controllers, number of frame managers, number of 1g and 10g ports. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-01-25 18:42:32 +00:00
#define CONFIG_SYS_NUM_FMAN 1
#define CONFIG_SYS_NUM_FM1_DTSEC 5
#define CONFIG_NUM_DDR_CONTROLLERS 1
powerpc/85xx: Specify CONFIG_SYS_FM_MURAM_SIZE CONFIG_SYS_FM_MURAM_SIZE varies from SoC to SoC to specify it in config_mpc85xx.h for those parts with a Frame Manager. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-02-04 06:43:34 +00:00
#define CONFIG_SYS_FM_MURAM_SIZE 0x28000
powerpc/85xx: Change timebase divisor to be defined per processor Introduce new CONFIG_SYS_FSL_TBCLK_DIV on 85xx platforms because different SoCs have different divisor amounts. All the PQ3 parts are /8, the P4080/P4080 is /16, and P2040/P3041/P5020 are /32. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-02-18 11:40:54 +00:00
#define CONFIG_SYS_FSL_TBCLK_DIV 32
powerpc/fsl_pci: Fix device tree fixups for newer platforms We assumed that only a small set of compatiable strings would be needed to find the PCIe device tree nodes to be fixed up. However on newer platforms the simple rules no longer work. We need to allow specifying the PCIe compatiable string for each individual SoC. We introduce CONFIG_SYS_FSL_PCIE_COMPAT for this purpose and set it if the default isn't sufficient. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-05-20 05:39:21 +00:00
#define CONFIG_SYS_FSL_PCIE_COMPAT "fsl,qoriq-pcie-v2.2"
powerpc/85xx: introduce and document CONFIG_SYS_CCSRBAR macros Introduce the CONFIG_SYS_CCSRBAR_PHYS_HIGH and CONFIG_SYS_CCSRBAR_PHYS_LOW macros, which contain the high and low portions of CONFIG_SYS_CCSRBAR_PHYS. This is necessary for the assembly-language code that relocates CCSR, since the assembler does not understand 64-bit constants. CONFIG_SYS_CCSRBAR_PHYS is automatically defined from the CONFIG_SYS_CCSRBAR_PHYS_HIGH and CONFIG_SYS_CCSRBAR_PHYS_LOW macros, so it should not be defined in a board header file. Similarly, CONFIG_SYS_CCSRBAR_DEFAULT is defined for each SOC in config_mpc85xx.h, so it should also not be defined in the board header file. CONFIG_SYS_CCSR_DO_NOT_RELOCATE is a "short-cut" macro that guarantees that CONFIG_SYS_CCSRBAR_PHYS is set to the same value as CONFIG_SYS_CCSRBAR_DEFAULT, and so CCSR will not be relocated. Since CONFIG_SYS_CCSRBAR_DEFAULT is locked to a fixed value, multi-stage U-Boot builds (e.g. NAND) are required to relocate CCSR only during the last stage (i.e. the "real" U-Boot). All other stages should define CONFIG_SYS_CCSR_DO_NOT_RELOCATE to ensure that CCSR is not relocated. README is updated with descriptions of all the CONFIG_SYS_CCSRBAR_xxx macros. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-08-04 23:03:41 +00:00
#define CONFIG_SYS_CCSRBAR_DEFAULT 0xfe000000
powerpc/85xx: Enable Internal USB PHY for p2040, p3041, p5010 and p5020 The P2040, P3041, P5010, and P5020 all have internal USB PHYs that we need to enable for them to function. Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-04-13 05:08:51 +00:00
#define CONFIG_SYS_FSL_USB1_PHY_ENABLE
#define CONFIG_SYS_FSL_USB2_PHY_ENABLE
powerpc/85xx: Enable internal USB UTMI PHY on p204x/p3041/p50x0 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-04-13 05:19:10 +00:00
#define CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY
powerpc/85xx: Enable ESDHC111 erratum on P2040/P3041/P5010/P5020 SoCs The workaround for ESDHC111 should also be applied on P2040/P3041/P5010/P5020 SoCs. Signed-off-by: Lei Xu <B33228@freescale.com> Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-04-19 07:28:41 +00:00
#define CONFIG_SYS_FSL_ERRATUM_ESDHC111
powerpc/mpc85xx: Workaround for erratum CPU_A011 Erratum NMG_CPU_A011 applies to P4080 rev 1.0, 2.0, fixed in rev 3.0. It also applies to P3041 rev 1.0, 1.1, P2041 rev 1.0, 1.1. It shares the same workaround as erratum CPU22. Rearrange registers usage in assembly code to avoid accidental overwriting. Signed-off-by: York Sun <yorksun@freescale.com>
2012-05-07 07:26:47 +00:00
#define CONFIG_SYS_FSL_ERRATUM_NMG_CPU_A011
powerpc/85xx: Add workaround for erratum CPU-A003999 Erratum A-003999: Running Floating Point instructions requires special initialization. Impact: Floating point arithmetic operations may result in an incorrect value. Workaround: Perform a read modify write to set bit 7 to a 1 in SPR 977 before executing any floating point arithmetic operation. This bit can be set when setting MSR[FP], and can be cleared when clearing MSR[FP]. Alternatively, the bit can be set once at boot time, and never cleared. There will be no performance degradation due to setting this bit. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-11-22 12:51:15 +00:00
#define CONFIG_SYS_FSL_ERRATUM_CPU_A003999
powerpc/85xx: Add workaround for erratum A-003474 Erratum A-003474: Internal DDR calibration circuit is not supported Impact: Experience shows no significant benefit to device operation with auto-calibration enabled versus it disabled. To ensure consistent timing results, Freescale recommends this feature be disabled in future customer products. There should be no impact to parts that are already operating in the field. Workaround: Prior to setting DDR_SDRAM_CFG[MEM_EN]=1, do the following: 1. Write a value of 0x0000_0015 to the register at offset CCSRBAR + DDR OFFSET + 0xf30 2. Write a value of 0x2400_0000 to the register at offset CCSRBAR + DDR OFFSET + 0xf54 Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-11-20 18:01:35 +00:00
#define CONFIG_SYS_FSL_ERRATUM_DDR_A003474
powerpc/srio: Rewrite the struct ccsr_rio Rewrite this struct for the support of two ports and two message units registers. Signed-off-by: Liu Gang <Gang.Liu@freescale.com>
2012-03-08 00:33:14 +00:00
#define CONFIG_SYS_FSL_SRIO_MAX_PORTS 2
#define CONFIG_SYS_FSL_SRIO_OB_WIN_NUM 9
#define CONFIG_SYS_FSL_SRIO_IB_WIN_NUM 5
powerpc/8xxx: Introduce 85xx, 86xx, QorIQ config headers Add new headers that capture common defines for a given SoC/processor rather than duplicating that information in board config.h and random other places. Eventually this should be handled by Kconfig & defconfigs Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Acked-by: Wolfgang Denk <wd@denx.de>
2011-01-19 09:05:26 +00:00
powerpc/85xx: Add P2041 processor support The P2041 is similar to P2040, however has a 10G port and backside L2 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-05-13 06:16:07 +00:00
#elif defined(CONFIG_PPC_P2041)
#define CONFIG_MAX_CPUS 4
#define CONFIG_SYS_FSL_NUM_CC_PLLS 2
#define CONFIG_SYS_FSL_NUM_LAWS 32
#define CONFIG_SYS_FSL_SEC_COMPAT 4
powerpc/85xx: CONFIG_FSL_SATA_V2 should be defined in config_mpc85xx.h Macro CONFIG_FSL_SATA_V2 is defined if the SOC has a V2 Freescale SATA controller, so it should be defined in config_mpc85xx.h instead of the various board header files. So now CONFIG_FSL_SATA_V2 is always defined on the P1013, P1022, P2041, P3041, P5010, and P5020. It was already defined for the P1010 and P1014. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-11-21 23:10:22 +00:00
#define CONFIG_FSL_SATA_V2
powerpc/85xx: Add P2041 processor support The P2041 is similar to P2040, however has a 10G port and backside L2 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-05-13 06:16:07 +00:00
#define CONFIG_SYS_NUM_FMAN 1
#define CONFIG_SYS_NUM_FM1_DTSEC 5
#define CONFIG_SYS_NUM_FM1_10GEC 1
#define CONFIG_NUM_DDR_CONTROLLERS 1
#define CONFIG_SYS_FM_MURAM_SIZE 0x28000
#define CONFIG_SYS_FSL_TBCLK_DIV 32
#define CONFIG_SYS_FSL_PCIE_COMPAT "fsl,qoriq-pcie-v2.2"
powerpc/85xx: introduce and document CONFIG_SYS_CCSRBAR macros Introduce the CONFIG_SYS_CCSRBAR_PHYS_HIGH and CONFIG_SYS_CCSRBAR_PHYS_LOW macros, which contain the high and low portions of CONFIG_SYS_CCSRBAR_PHYS. This is necessary for the assembly-language code that relocates CCSR, since the assembler does not understand 64-bit constants. CONFIG_SYS_CCSRBAR_PHYS is automatically defined from the CONFIG_SYS_CCSRBAR_PHYS_HIGH and CONFIG_SYS_CCSRBAR_PHYS_LOW macros, so it should not be defined in a board header file. Similarly, CONFIG_SYS_CCSRBAR_DEFAULT is defined for each SOC in config_mpc85xx.h, so it should also not be defined in the board header file. CONFIG_SYS_CCSR_DO_NOT_RELOCATE is a "short-cut" macro that guarantees that CONFIG_SYS_CCSRBAR_PHYS is set to the same value as CONFIG_SYS_CCSRBAR_DEFAULT, and so CCSR will not be relocated. Since CONFIG_SYS_CCSRBAR_DEFAULT is locked to a fixed value, multi-stage U-Boot builds (e.g. NAND) are required to relocate CCSR only during the last stage (i.e. the "real" U-Boot). All other stages should define CONFIG_SYS_CCSR_DO_NOT_RELOCATE to ensure that CCSR is not relocated. README is updated with descriptions of all the CONFIG_SYS_CCSRBAR_xxx macros. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-08-04 23:03:41 +00:00
#define CONFIG_SYS_CCSRBAR_DEFAULT 0xfe000000
powerpc/85xx: Add P2041 processor support The P2041 is similar to P2040, however has a 10G port and backside L2 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-05-13 06:16:07 +00:00
#define CONFIG_SYS_FSL_USB1_PHY_ENABLE
#define CONFIG_SYS_FSL_USB2_PHY_ENABLE
powerpc/85xx: Enable internal USB UTMI PHY on p204x/p3041/p50x0 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-04-13 05:19:10 +00:00
#define CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY
powerpc/85xx: Add P2041 processor support The P2041 is similar to P2040, however has a 10G port and backside L2 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-05-13 06:16:07 +00:00
#define CONFIG_SYS_FSL_ERRATUM_ESDHC111
powerpc/mpc85xx: Workaround for erratum CPU_A011 Erratum NMG_CPU_A011 applies to P4080 rev 1.0, 2.0, fixed in rev 3.0. It also applies to P3041 rev 1.0, 1.1, P2041 rev 1.0, 1.1. It shares the same workaround as erratum CPU22. Rearrange registers usage in assembly code to avoid accidental overwriting. Signed-off-by: York Sun <yorksun@freescale.com>
2012-05-07 07:26:47 +00:00
#define CONFIG_SYS_FSL_ERRATUM_NMG_CPU_A011
powerpc/85xx: Add workaround for erratum CPU-A003999 Erratum A-003999: Running Floating Point instructions requires special initialization. Impact: Floating point arithmetic operations may result in an incorrect value. Workaround: Perform a read modify write to set bit 7 to a 1 in SPR 977 before executing any floating point arithmetic operation. This bit can be set when setting MSR[FP], and can be cleared when clearing MSR[FP]. Alternatively, the bit can be set once at boot time, and never cleared. There will be no performance degradation due to setting this bit. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-11-22 12:51:15 +00:00
#define CONFIG_SYS_FSL_ERRATUM_CPU_A003999
powerpc/85xx: Add workaround for erratum A-003474 Erratum A-003474: Internal DDR calibration circuit is not supported Impact: Experience shows no significant benefit to device operation with auto-calibration enabled versus it disabled. To ensure consistent timing results, Freescale recommends this feature be disabled in future customer products. There should be no impact to parts that are already operating in the field. Workaround: Prior to setting DDR_SDRAM_CFG[MEM_EN]=1, do the following: 1. Write a value of 0x0000_0015 to the register at offset CCSRBAR + DDR OFFSET + 0xf30 2. Write a value of 0x2400_0000 to the register at offset CCSRBAR + DDR OFFSET + 0xf54 Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-11-20 18:01:35 +00:00
#define CONFIG_SYS_FSL_ERRATUM_DDR_A003474
powerpc/srio: Rewrite the struct ccsr_rio Rewrite this struct for the support of two ports and two message units registers. Signed-off-by: Liu Gang <Gang.Liu@freescale.com>
2012-03-08 00:33:14 +00:00
#define CONFIG_SYS_FSL_SRIO_MAX_PORTS 2
#define CONFIG_SYS_FSL_SRIO_OB_WIN_NUM 9
#define CONFIG_SYS_FSL_SRIO_IB_WIN_NUM 5
powerpc/85xx: Add P2041 processor support The P2041 is similar to P2040, however has a 10G port and backside L2 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-05-13 06:16:07 +00:00
powerpc/8xxx: Introduce 85xx, 86xx, QorIQ config headers Add new headers that capture common defines for a given SoC/processor rather than duplicating that information in board config.h and random other places. Eventually this should be handled by Kconfig & defconfigs Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Acked-by: Wolfgang Denk <wd@denx.de>
2011-01-19 09:05:26 +00:00
#elif defined(CONFIG_PPC_P3041)
#define CONFIG_MAX_CPUS 4
powerpc/85xx: Fixup determining PME, FMan freq On CoreNet based SoCs (P2040, P3041, P4080, P5020) we have some additional rules to determining the various frequencies that PME & FMan IP blocks run at. We need to take into account: * Reduced number of Core Complex PLL clusters * HWA_ASYNC_DIV (allows for /2 or /4 options) On P2040/P3041/P5020 we only have 2 Core Complex PLLs and in such SoCs the PME & FMan blocks utilize the second Core Complex PLL. On SoCs like p4080 with 4 Core Complex PLLs we utilize the third Core Complex PLL for PME & FMan blocks. On P2040/P3041/P5020 we have the added feature that we can divide the PLL down further by either /2 or /4 based on HWA_ASYNC_DIV. On P4080 this options doesn't exist, however HWA_ASYNC_DIV field in RCW should be set to 0 and this gets a backward compatiable /2 behavior. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-02-16 08:03:29 +00:00
#define CONFIG_SYS_FSL_NUM_CC_PLLS 2
powerpc/8xxx: Introduce 85xx, 86xx, QorIQ config headers Add new headers that capture common defines for a given SoC/processor rather than duplicating that information in board config.h and random other places. Eventually this should be handled by Kconfig & defconfigs Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Acked-by: Wolfgang Denk <wd@denx.de>
2011-01-19 09:05:26 +00:00
#define CONFIG_SYS_FSL_NUM_LAWS 32
#define CONFIG_SYS_FSL_SEC_COMPAT 4
powerpc/85xx: CONFIG_FSL_SATA_V2 should be defined in config_mpc85xx.h Macro CONFIG_FSL_SATA_V2 is defined if the SOC has a V2 Freescale SATA controller, so it should be defined in config_mpc85xx.h instead of the various board header files. So now CONFIG_FSL_SATA_V2 is always defined on the P1013, P1022, P2041, P3041, P5010, and P5020. It was already defined for the P1010 and P1014. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-11-21 23:10:22 +00:00
#define CONFIG_FSL_SATA_V2
powerpc/85xx: Add some defines for P2040, P3041, P5010, P5020 Specify the number of DDR controllers, number of frame managers, number of 1g and 10g ports. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-01-25 18:42:32 +00:00
#define CONFIG_SYS_NUM_FMAN 1
#define CONFIG_SYS_NUM_FM1_DTSEC 5
#define CONFIG_SYS_NUM_FM1_10GEC 1
#define CONFIG_NUM_DDR_CONTROLLERS 1
powerpc/85xx: Specify CONFIG_SYS_FM_MURAM_SIZE CONFIG_SYS_FM_MURAM_SIZE varies from SoC to SoC to specify it in config_mpc85xx.h for those parts with a Frame Manager. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-02-04 06:43:34 +00:00
#define CONFIG_SYS_FM_MURAM_SIZE 0x28000
powerpc/85xx: Change timebase divisor to be defined per processor Introduce new CONFIG_SYS_FSL_TBCLK_DIV on 85xx platforms because different SoCs have different divisor amounts. All the PQ3 parts are /8, the P4080/P4080 is /16, and P2040/P3041/P5020 are /32. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-02-18 11:40:54 +00:00
#define CONFIG_SYS_FSL_TBCLK_DIV 32
powerpc/fsl_pci: Fix device tree fixups for newer platforms We assumed that only a small set of compatiable strings would be needed to find the PCIe device tree nodes to be fixed up. However on newer platforms the simple rules no longer work. We need to allow specifying the PCIe compatiable string for each individual SoC. We introduce CONFIG_SYS_FSL_PCIE_COMPAT for this purpose and set it if the default isn't sufficient. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-05-20 05:39:21 +00:00
#define CONFIG_SYS_FSL_PCIE_COMPAT "fsl,qoriq-pcie-v2.2"
powerpc/85xx: introduce and document CONFIG_SYS_CCSRBAR macros Introduce the CONFIG_SYS_CCSRBAR_PHYS_HIGH and CONFIG_SYS_CCSRBAR_PHYS_LOW macros, which contain the high and low portions of CONFIG_SYS_CCSRBAR_PHYS. This is necessary for the assembly-language code that relocates CCSR, since the assembler does not understand 64-bit constants. CONFIG_SYS_CCSRBAR_PHYS is automatically defined from the CONFIG_SYS_CCSRBAR_PHYS_HIGH and CONFIG_SYS_CCSRBAR_PHYS_LOW macros, so it should not be defined in a board header file. Similarly, CONFIG_SYS_CCSRBAR_DEFAULT is defined for each SOC in config_mpc85xx.h, so it should also not be defined in the board header file. CONFIG_SYS_CCSR_DO_NOT_RELOCATE is a "short-cut" macro that guarantees that CONFIG_SYS_CCSRBAR_PHYS is set to the same value as CONFIG_SYS_CCSRBAR_DEFAULT, and so CCSR will not be relocated. Since CONFIG_SYS_CCSRBAR_DEFAULT is locked to a fixed value, multi-stage U-Boot builds (e.g. NAND) are required to relocate CCSR only during the last stage (i.e. the "real" U-Boot). All other stages should define CONFIG_SYS_CCSR_DO_NOT_RELOCATE to ensure that CCSR is not relocated. README is updated with descriptions of all the CONFIG_SYS_CCSRBAR_xxx macros. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-08-04 23:03:41 +00:00
#define CONFIG_SYS_CCSRBAR_DEFAULT 0xfe000000
powerpc/85xx: Enable Internal USB PHY for p2040, p3041, p5010 and p5020 The P2040, P3041, P5010, and P5020 all have internal USB PHYs that we need to enable for them to function. Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-04-13 05:08:51 +00:00
#define CONFIG_SYS_FSL_USB1_PHY_ENABLE
#define CONFIG_SYS_FSL_USB2_PHY_ENABLE
powerpc/85xx: Enable internal USB UTMI PHY on p204x/p3041/p50x0 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-04-13 05:19:10 +00:00
#define CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY
powerpc/85xx: Enable ESDHC111 erratum on P2040/P3041/P5010/P5020 SoCs The workaround for ESDHC111 should also be applied on P2040/P3041/P5010/P5020 SoCs. Signed-off-by: Lei Xu <B33228@freescale.com> Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-04-19 07:28:41 +00:00
#define CONFIG_SYS_FSL_ERRATUM_ESDHC111
powerpc/85xx: Add workaround for erratum CPU-A003999 Erratum A-003999: Running Floating Point instructions requires special initialization. Impact: Floating point arithmetic operations may result in an incorrect value. Workaround: Perform a read modify write to set bit 7 to a 1 in SPR 977 before executing any floating point arithmetic operation. This bit can be set when setting MSR[FP], and can be cleared when clearing MSR[FP]. Alternatively, the bit can be set once at boot time, and never cleared. There will be no performance degradation due to setting this bit. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-11-22 12:51:15 +00:00
#define CONFIG_SYS_FSL_ERRATUM_CPU_A003999
powerpc/85xx: Add workaround for erratum A-003474 Erratum A-003474: Internal DDR calibration circuit is not supported Impact: Experience shows no significant benefit to device operation with auto-calibration enabled versus it disabled. To ensure consistent timing results, Freescale recommends this feature be disabled in future customer products. There should be no impact to parts that are already operating in the field. Workaround: Prior to setting DDR_SDRAM_CFG[MEM_EN]=1, do the following: 1. Write a value of 0x0000_0015 to the register at offset CCSRBAR + DDR OFFSET + 0xf30 2. Write a value of 0x2400_0000 to the register at offset CCSRBAR + DDR OFFSET + 0xf54 Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-11-20 18:01:35 +00:00
#define CONFIG_SYS_FSL_ERRATUM_DDR_A003474
powerpc/srio: Rewrite the struct ccsr_rio Rewrite this struct for the support of two ports and two message units registers. Signed-off-by: Liu Gang <Gang.Liu@freescale.com>
2012-03-08 00:33:14 +00:00
#define CONFIG_SYS_FSL_SRIO_MAX_PORTS 2
#define CONFIG_SYS_FSL_SRIO_OB_WIN_NUM 9
#define CONFIG_SYS_FSL_SRIO_IB_WIN_NUM 5
powerpc/8xxx: Introduce 85xx, 86xx, QorIQ config headers Add new headers that capture common defines for a given SoC/processor rather than duplicating that information in board config.h and random other places. Eventually this should be handled by Kconfig & defconfigs Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Acked-by: Wolfgang Denk <wd@denx.de>
2011-01-19 09:05:26 +00:00
powerpc/p3060: Add SoC related support for P3060 platform Add P3060 SoC specific information:cores setup, LIODN setup, etc The P3060 SoC combines six e500mc Power Architecture processor cores with high-performance datapath acceleration architecture(DPAA), CoreNet fabric infrastructure, as well as network and peripheral interfaces. Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-08-31 09:48:18 +00:00
#elif defined(CONFIG_PPC_P3060)
#define CONFIG_MAX_CPUS 8
#define CONFIG_SYS_FSL_NUM_CC_PLLS 4
#define CONFIG_SYS_FSL_NUM_LAWS 32
#define CONFIG_SYS_FSL_SEC_COMPAT 4
#define CONFIG_SYS_NUM_FMAN 2
#define CONFIG_SYS_NUM_FM1_DTSEC 4
#define CONFIG_SYS_NUM_FM2_DTSEC 4
#define CONFIG_NUM_DDR_CONTROLLERS 1
#define CONFIG_SYS_FM_MURAM_SIZE 0x28000
#define CONFIG_SYS_FSL_TBCLK_DIV 16
#define CONFIG_SYS_FSL_PCIE_COMPAT "fsl,qoriq-pcie-v2.2"
#define CONFIG_SYS_CCSRBAR_DEFAULT 0xfe000000
#define CONFIG_SYS_FSL_ERRATUM_DDR_A003
powerpc/85xx: Add workaround for erratum CPU-A003999 Erratum A-003999: Running Floating Point instructions requires special initialization. Impact: Floating point arithmetic operations may result in an incorrect value. Workaround: Perform a read modify write to set bit 7 to a 1 in SPR 977 before executing any floating point arithmetic operation. This bit can be set when setting MSR[FP], and can be cleared when clearing MSR[FP]. Alternatively, the bit can be set once at boot time, and never cleared. There will be no performance degradation due to setting this bit. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-11-22 12:51:15 +00:00
#define CONFIG_SYS_FSL_ERRATUM_CPU_A003999
powerpc/srio: Rewrite the struct ccsr_rio Rewrite this struct for the support of two ports and two message units registers. Signed-off-by: Liu Gang <Gang.Liu@freescale.com>
2012-03-08 00:33:14 +00:00
#define CONFIG_SYS_FSL_SRIO_MAX_PORTS 2
#define CONFIG_SYS_FSL_SRIO_OB_WIN_NUM 9
#define CONFIG_SYS_FSL_SRIO_IB_WIN_NUM 5
powerpc/p3060: Add SoC related support for P3060 platform Add P3060 SoC specific information:cores setup, LIODN setup, etc The P3060 SoC combines six e500mc Power Architecture processor cores with high-performance datapath acceleration architecture(DPAA), CoreNet fabric infrastructure, as well as network and peripheral interfaces. Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-08-31 09:48:18 +00:00
powerpc/8xxx: Introduce 85xx, 86xx, QorIQ config headers Add new headers that capture common defines for a given SoC/processor rather than duplicating that information in board config.h and random other places. Eventually this should be handled by Kconfig & defconfigs Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Acked-by: Wolfgang Denk <wd@denx.de>
2011-01-19 09:05:26 +00:00
#elif defined(CONFIG_PPC_P4040)
#define CONFIG_MAX_CPUS 4
powerpc/85xx: Fixup determining PME, FMan freq On CoreNet based SoCs (P2040, P3041, P4080, P5020) we have some additional rules to determining the various frequencies that PME & FMan IP blocks run at. We need to take into account: * Reduced number of Core Complex PLL clusters * HWA_ASYNC_DIV (allows for /2 or /4 options) On P2040/P3041/P5020 we only have 2 Core Complex PLLs and in such SoCs the PME & FMan blocks utilize the second Core Complex PLL. On SoCs like p4080 with 4 Core Complex PLLs we utilize the third Core Complex PLL for PME & FMan blocks. On P2040/P3041/P5020 we have the added feature that we can divide the PLL down further by either /2 or /4 based on HWA_ASYNC_DIV. On P4080 this options doesn't exist, however HWA_ASYNC_DIV field in RCW should be set to 0 and this gets a backward compatiable /2 behavior. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-02-16 08:03:29 +00:00
#define CONFIG_SYS_FSL_NUM_CC_PLLS 4
powerpc/8xxx: Introduce 85xx, 86xx, QorIQ config headers Add new headers that capture common defines for a given SoC/processor rather than duplicating that information in board config.h and random other places. Eventually this should be handled by Kconfig & defconfigs Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Acked-by: Wolfgang Denk <wd@denx.de>
2011-01-19 09:05:26 +00:00
#define CONFIG_SYS_FSL_NUM_LAWS 32
#define CONFIG_SYS_FSL_SEC_COMPAT 4
powerpc/85xx: Specify CONFIG_SYS_FM_MURAM_SIZE CONFIG_SYS_FM_MURAM_SIZE varies from SoC to SoC to specify it in config_mpc85xx.h for those parts with a Frame Manager. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-02-04 06:43:34 +00:00
#define CONFIG_SYS_FM_MURAM_SIZE 0x28000
powerpc/85xx: Change timebase divisor to be defined per processor Introduce new CONFIG_SYS_FSL_TBCLK_DIV on 85xx platforms because different SoCs have different divisor amounts. All the PQ3 parts are /8, the P4080/P4080 is /16, and P2040/P3041/P5020 are /32. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-02-18 11:40:54 +00:00
#define CONFIG_SYS_FSL_TBCLK_DIV 16
powerpc/fsl_pci: Fix device tree fixups for newer platforms We assumed that only a small set of compatiable strings would be needed to find the PCIe device tree nodes to be fixed up. However on newer platforms the simple rules no longer work. We need to allow specifying the PCIe compatiable string for each individual SoC. We introduce CONFIG_SYS_FSL_PCIE_COMPAT for this purpose and set it if the default isn't sufficient. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-05-20 05:39:21 +00:00
#define CONFIG_SYS_FSL_PCIE_COMPAT "fsl,p4080-pcie"
powerpc/85xx: introduce and document CONFIG_SYS_CCSRBAR macros Introduce the CONFIG_SYS_CCSRBAR_PHYS_HIGH and CONFIG_SYS_CCSRBAR_PHYS_LOW macros, which contain the high and low portions of CONFIG_SYS_CCSRBAR_PHYS. This is necessary for the assembly-language code that relocates CCSR, since the assembler does not understand 64-bit constants. CONFIG_SYS_CCSRBAR_PHYS is automatically defined from the CONFIG_SYS_CCSRBAR_PHYS_HIGH and CONFIG_SYS_CCSRBAR_PHYS_LOW macros, so it should not be defined in a board header file. Similarly, CONFIG_SYS_CCSRBAR_DEFAULT is defined for each SOC in config_mpc85xx.h, so it should also not be defined in the board header file. CONFIG_SYS_CCSR_DO_NOT_RELOCATE is a "short-cut" macro that guarantees that CONFIG_SYS_CCSRBAR_PHYS is set to the same value as CONFIG_SYS_CCSRBAR_DEFAULT, and so CCSR will not be relocated. Since CONFIG_SYS_CCSRBAR_DEFAULT is locked to a fixed value, multi-stage U-Boot builds (e.g. NAND) are required to relocate CCSR only during the last stage (i.e. the "real" U-Boot). All other stages should define CONFIG_SYS_CCSR_DO_NOT_RELOCATE to ensure that CCSR is not relocated. README is updated with descriptions of all the CONFIG_SYS_CCSRBAR_xxx macros. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-08-04 23:03:41 +00:00
#define CONFIG_SYS_CCSRBAR_DEFAULT 0xfe000000
powerpc/85xx: Add workaround for erratum CPU-A003999 Erratum A-003999: Running Floating Point instructions requires special initialization. Impact: Floating point arithmetic operations may result in an incorrect value. Workaround: Perform a read modify write to set bit 7 to a 1 in SPR 977 before executing any floating point arithmetic operation. This bit can be set when setting MSR[FP], and can be cleared when clearing MSR[FP]. Alternatively, the bit can be set once at boot time, and never cleared. There will be no performance degradation due to setting this bit. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-11-22 12:51:15 +00:00
#define CONFIG_SYS_FSL_ERRATUM_CPU_A003999
powerpc/85xx: Add workaround for erratum A-003474 Erratum A-003474: Internal DDR calibration circuit is not supported Impact: Experience shows no significant benefit to device operation with auto-calibration enabled versus it disabled. To ensure consistent timing results, Freescale recommends this feature be disabled in future customer products. There should be no impact to parts that are already operating in the field. Workaround: Prior to setting DDR_SDRAM_CFG[MEM_EN]=1, do the following: 1. Write a value of 0x0000_0015 to the register at offset CCSRBAR + DDR OFFSET + 0xf30 2. Write a value of 0x2400_0000 to the register at offset CCSRBAR + DDR OFFSET + 0xf54 Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-11-20 18:01:35 +00:00
#define CONFIG_SYS_FSL_ERRATUM_DDR_A003474
powerpc/srio: Rewrite the struct ccsr_rio Rewrite this struct for the support of two ports and two message units registers. Signed-off-by: Liu Gang <Gang.Liu@freescale.com>
2012-03-08 00:33:14 +00:00
#define CONFIG_SYS_FSL_SRIO_MAX_PORTS 2
#define CONFIG_SYS_FSL_SRIO_OB_WIN_NUM 9
#define CONFIG_SYS_FSL_SRIO_IB_WIN_NUM 5
powerpc/8xxx: Introduce 85xx, 86xx, QorIQ config headers Add new headers that capture common defines for a given SoC/processor rather than duplicating that information in board config.h and random other places. Eventually this should be handled by Kconfig & defconfigs Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Acked-by: Wolfgang Denk <wd@denx.de>
2011-01-19 09:05:26 +00:00
#elif defined(CONFIG_PPC_P4080)
#define CONFIG_MAX_CPUS 8
powerpc/85xx: Fixup determining PME, FMan freq On CoreNet based SoCs (P2040, P3041, P4080, P5020) we have some additional rules to determining the various frequencies that PME & FMan IP blocks run at. We need to take into account: * Reduced number of Core Complex PLL clusters * HWA_ASYNC_DIV (allows for /2 or /4 options) On P2040/P3041/P5020 we only have 2 Core Complex PLLs and in such SoCs the PME & FMan blocks utilize the second Core Complex PLL. On SoCs like p4080 with 4 Core Complex PLLs we utilize the third Core Complex PLL for PME & FMan blocks. On P2040/P3041/P5020 we have the added feature that we can divide the PLL down further by either /2 or /4 based on HWA_ASYNC_DIV. On P4080 this options doesn't exist, however HWA_ASYNC_DIV field in RCW should be set to 0 and this gets a backward compatiable /2 behavior. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-02-16 08:03:29 +00:00
#define CONFIG_SYS_FSL_NUM_CC_PLLS 4
powerpc/8xxx: Introduce 85xx, 86xx, QorIQ config headers Add new headers that capture common defines for a given SoC/processor rather than duplicating that information in board config.h and random other places. Eventually this should be handled by Kconfig & defconfigs Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Acked-by: Wolfgang Denk <wd@denx.de>
2011-01-19 09:05:26 +00:00
#define CONFIG_SYS_FSL_NUM_LAWS 32
#define CONFIG_SYS_FSL_SEC_COMPAT 4
#define CONFIG_SYS_NUM_FMAN 2
#define CONFIG_SYS_NUM_FM1_DTSEC 4
#define CONFIG_SYS_NUM_FM2_DTSEC 4
#define CONFIG_SYS_NUM_FM1_10GEC 1
#define CONFIG_SYS_NUM_FM2_10GEC 1
#define CONFIG_NUM_DDR_CONTROLLERS 2
powerpc/85xx: Specify CONFIG_SYS_FM_MURAM_SIZE CONFIG_SYS_FM_MURAM_SIZE varies from SoC to SoC to specify it in config_mpc85xx.h for those parts with a Frame Manager. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-02-04 06:43:34 +00:00
#define CONFIG_SYS_FM_MURAM_SIZE 0x28000
powerpc/85xx: Change timebase divisor to be defined per processor Introduce new CONFIG_SYS_FSL_TBCLK_DIV on 85xx platforms because different SoCs have different divisor amounts. All the PQ3 parts are /8, the P4080/P4080 is /16, and P2040/P3041/P5020 are /32. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-02-18 11:40:54 +00:00
#define CONFIG_SYS_FSL_TBCLK_DIV 16
powerpc/fsl_pci: Fix device tree fixups for newer platforms We assumed that only a small set of compatiable strings would be needed to find the PCIe device tree nodes to be fixed up. However on newer platforms the simple rules no longer work. We need to allow specifying the PCIe compatiable string for each individual SoC. We introduce CONFIG_SYS_FSL_PCIE_COMPAT for this purpose and set it if the default isn't sufficient. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-05-20 05:39:21 +00:00
#define CONFIG_SYS_FSL_PCIE_COMPAT "fsl,p4080-pcie"
powerpc/85xx: introduce and document CONFIG_SYS_CCSRBAR macros Introduce the CONFIG_SYS_CCSRBAR_PHYS_HIGH and CONFIG_SYS_CCSRBAR_PHYS_LOW macros, which contain the high and low portions of CONFIG_SYS_CCSRBAR_PHYS. This is necessary for the assembly-language code that relocates CCSR, since the assembler does not understand 64-bit constants. CONFIG_SYS_CCSRBAR_PHYS is automatically defined from the CONFIG_SYS_CCSRBAR_PHYS_HIGH and CONFIG_SYS_CCSRBAR_PHYS_LOW macros, so it should not be defined in a board header file. Similarly, CONFIG_SYS_CCSRBAR_DEFAULT is defined for each SOC in config_mpc85xx.h, so it should also not be defined in the board header file. CONFIG_SYS_CCSR_DO_NOT_RELOCATE is a "short-cut" macro that guarantees that CONFIG_SYS_CCSRBAR_PHYS is set to the same value as CONFIG_SYS_CCSRBAR_DEFAULT, and so CCSR will not be relocated. Since CONFIG_SYS_CCSRBAR_DEFAULT is locked to a fixed value, multi-stage U-Boot builds (e.g. NAND) are required to relocate CCSR only during the last stage (i.e. the "real" U-Boot). All other stages should define CONFIG_SYS_CCSR_DO_NOT_RELOCATE to ensure that CCSR is not relocated. README is updated with descriptions of all the CONFIG_SYS_CCSRBAR_xxx macros. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-08-04 23:03:41 +00:00
#define CONFIG_SYS_CCSRBAR_DEFAULT 0xfe000000
powerpc/8xxx: Introduce 85xx, 86xx, QorIQ config headers Add new headers that capture common defines for a given SoC/processor rather than duplicating that information in board config.h and random other places. Eventually this should be handled by Kconfig & defconfigs Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Acked-by: Wolfgang Denk <wd@denx.de>
2011-01-19 09:05:26 +00:00
#define CONFIG_SYS_FSL_ERRATUM_CPC_A002
#define CONFIG_SYS_FSL_ERRATUM_CPC_A003
mpc85xx: Implement workaround for erratum DDR-A003 Erratum DDR-A003 requires workaround to correctly set RCW10 for registered DIMM. Also adding polling after enabling DDR controller to ensure completion. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-01-10 12:03:01 +00:00
#define CONFIG_SYS_FSL_ERRATUM_DDR_A003
powerpc/8xxx: Introduce 85xx, 86xx, QorIQ config headers Add new headers that capture common defines for a given SoC/processor rather than duplicating that information in board config.h and random other places. Eventually this should be handled by Kconfig & defconfigs Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Acked-by: Wolfgang Denk <wd@denx.de>
2011-01-19 09:05:26 +00:00
#define CONFIG_SYS_FSL_ERRATUM_ELBC_A001
#define CONFIG_SYS_FSL_ERRATUM_ESDHC111
#define CONFIG_SYS_FSL_ERRATUM_ESDHC135
#define CONFIG_SYS_FSL_ERRATUM_ESDHC136
#define CONFIG_SYS_P4080_ERRATUM_CPU22
powerpc/mpc85xx: Workaround for erratum CPU_A011 Erratum NMG_CPU_A011 applies to P4080 rev 1.0, 2.0, fixed in rev 3.0. It also applies to P3041 rev 1.0, 1.1, P2041 rev 1.0, 1.1. It shares the same workaround as erratum CPU22. Rearrange registers usage in assembly code to avoid accidental overwriting. Signed-off-by: York Sun <yorksun@freescale.com>
2012-05-07 07:26:47 +00:00
#define CONFIG_SYS_FSL_ERRATUM_NMG_CPU_A011
powerpc/8xxx: Introduce 85xx, 86xx, QorIQ config headers Add new headers that capture common defines for a given SoC/processor rather than duplicating that information in board config.h and random other places. Eventually this should be handled by Kconfig & defconfigs Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Acked-by: Wolfgang Denk <wd@denx.de>
2011-01-19 09:05:26 +00:00
#define CONFIG_SYS_P4080_ERRATUM_SERDES8
p4080/serdes: Implement the XAUI workaround for SERDES9 erratum Signed-off-by: Emil Medve <Emilian.Medve@Freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-09-01 03:57:38 +00:00
#define CONFIG_SYS_P4080_ERRATUM_SERDES9
powerpc/85xx: Implement work-around for P4080 erratum SERDES-A001 Bank powerdown through RCW[SRDS_LPD_Bn] for XAUI on FM2 and SGMII on FM1 are swapped. Erratum SERDES-A001 says that if bank two is kept disabled and after bank three is enabled, then the PLL for bank three won't lock properly. The work-around is to enable and then disable bank two after bank three is enabled. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-04-18 22:16:00 +00:00
#define CONFIG_SYS_P4080_ERRATUM_SERDES_A001
powerpc/85xx: Implement work-around for P4080 erratum SERDES-A005 SerDes PLL bandwidth default setting is incorrect when no lanes are configured as PCI Express. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-04-01 18:19:36 +00:00
#define CONFIG_SYS_P4080_ERRATUM_SERDES_A005
powerpc/85xx: Add workaround for erratum CPU-A003999 Erratum A-003999: Running Floating Point instructions requires special initialization. Impact: Floating point arithmetic operations may result in an incorrect value. Workaround: Perform a read modify write to set bit 7 to a 1 in SPR 977 before executing any floating point arithmetic operation. This bit can be set when setting MSR[FP], and can be cleared when clearing MSR[FP]. Alternatively, the bit can be set once at boot time, and never cleared. There will be no performance degradation due to setting this bit. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-11-22 12:51:15 +00:00
#define CONFIG_SYS_FSL_ERRATUM_CPU_A003999
powerpc/85xx: Add workaround for erratum A-003474 Erratum A-003474: Internal DDR calibration circuit is not supported Impact: Experience shows no significant benefit to device operation with auto-calibration enabled versus it disabled. To ensure consistent timing results, Freescale recommends this feature be disabled in future customer products. There should be no impact to parts that are already operating in the field. Workaround: Prior to setting DDR_SDRAM_CFG[MEM_EN]=1, do the following: 1. Write a value of 0x0000_0015 to the register at offset CCSRBAR + DDR OFFSET + 0xf30 2. Write a value of 0x2400_0000 to the register at offset CCSRBAR + DDR OFFSET + 0xf54 Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-11-20 18:01:35 +00:00
#define CONFIG_SYS_FSL_ERRATUM_DDR_A003474
powerpc/srio: Rewrite the struct ccsr_rio Rewrite this struct for the support of two ports and two message units registers. Signed-off-by: Liu Gang <Gang.Liu@freescale.com>
2012-03-08 00:33:14 +00:00
#define CONFIG_SYS_FSL_SRIO_MAX_PORTS 2
#define CONFIG_SYS_FSL_SRIO_OB_WIN_NUM 9
#define CONFIG_SYS_FSL_SRIO_IB_WIN_NUM 5
#define CONFIG_SYS_FSL_RMU
#define CONFIG_SYS_FSL_SRIO_MSG_UNIT_NUM 2
powerpc/8xxx: Introduce 85xx, 86xx, QorIQ config headers Add new headers that capture common defines for a given SoC/processor rather than duplicating that information in board config.h and random other places. Eventually this should be handled by Kconfig & defconfigs Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Acked-by: Wolfgang Denk <wd@denx.de>
2011-01-19 09:05:26 +00:00
powerpc/85xx: Support for Freescale P1024/P1025 processor Add Support for Freescale P1024/P1025 (dual core) and P1015/P1016 (single core) processors. P1024 is a variant of P1020 processor with a core frequency from 400Mhz to 667Mhz and comes in a 561-pin wirebond power-BGA P1025 is a variant of P1021 processor with a core frequency from 400Mhz to 667Mhz and comes in a 561-pin wirebond power-BGA P1015 is a variant of P1024 processor with single core and P1016 is a variant of P1025 processor with single core. Added comments in config_mpc85xx.h to denote single core versions of processors. Signed-off-by: Jin Qing <b24347@freescale.com> Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-02-05 19:45:07 +00:00
/* P5010 is single core version of P5020 */
powerpc/8xxx: Introduce 85xx, 86xx, QorIQ config headers Add new headers that capture common defines for a given SoC/processor rather than duplicating that information in board config.h and random other places. Eventually this should be handled by Kconfig & defconfigs Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Acked-by: Wolfgang Denk <wd@denx.de>
2011-01-19 09:05:26 +00:00
#elif defined(CONFIG_PPC_P5010)
#define CONFIG_MAX_CPUS 1
powerpc/85xx: Fixup determining PME, FMan freq On CoreNet based SoCs (P2040, P3041, P4080, P5020) we have some additional rules to determining the various frequencies that PME & FMan IP blocks run at. We need to take into account: * Reduced number of Core Complex PLL clusters * HWA_ASYNC_DIV (allows for /2 or /4 options) On P2040/P3041/P5020 we only have 2 Core Complex PLLs and in such SoCs the PME & FMan blocks utilize the second Core Complex PLL. On SoCs like p4080 with 4 Core Complex PLLs we utilize the third Core Complex PLL for PME & FMan blocks. On P2040/P3041/P5020 we have the added feature that we can divide the PLL down further by either /2 or /4 based on HWA_ASYNC_DIV. On P4080 this options doesn't exist, however HWA_ASYNC_DIV field in RCW should be set to 0 and this gets a backward compatiable /2 behavior. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-02-16 08:03:29 +00:00
#define CONFIG_SYS_FSL_NUM_CC_PLLS 2
powerpc/8xxx: Introduce 85xx, 86xx, QorIQ config headers Add new headers that capture common defines for a given SoC/processor rather than duplicating that information in board config.h and random other places. Eventually this should be handled by Kconfig & defconfigs Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Acked-by: Wolfgang Denk <wd@denx.de>
2011-01-19 09:05:26 +00:00
#define CONFIG_SYS_FSL_NUM_LAWS 32
#define CONFIG_SYS_FSL_SEC_COMPAT 4
powerpc/85xx: CONFIG_FSL_SATA_V2 should be defined in config_mpc85xx.h Macro CONFIG_FSL_SATA_V2 is defined if the SOC has a V2 Freescale SATA controller, so it should be defined in config_mpc85xx.h instead of the various board header files. So now CONFIG_FSL_SATA_V2 is always defined on the P1013, P1022, P2041, P3041, P5010, and P5020. It was already defined for the P1010 and P1014. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-11-21 23:10:22 +00:00
#define CONFIG_FSL_SATA_V2
powerpc/85xx: Add some defines for P2040, P3041, P5010, P5020 Specify the number of DDR controllers, number of frame managers, number of 1g and 10g ports. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-01-25 18:42:32 +00:00
#define CONFIG_SYS_NUM_FMAN 1
#define CONFIG_SYS_NUM_FM1_DTSEC 5
#define CONFIG_SYS_NUM_FM1_10GEC 1
#define CONFIG_NUM_DDR_CONTROLLERS 1
powerpc/85xx: Specify CONFIG_SYS_FM_MURAM_SIZE CONFIG_SYS_FM_MURAM_SIZE varies from SoC to SoC to specify it in config_mpc85xx.h for those parts with a Frame Manager. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-02-04 06:43:34 +00:00
#define CONFIG_SYS_FM_MURAM_SIZE 0x28000
powerpc/85xx: Change timebase divisor to be defined per processor Introduce new CONFIG_SYS_FSL_TBCLK_DIV on 85xx platforms because different SoCs have different divisor amounts. All the PQ3 parts are /8, the P4080/P4080 is /16, and P2040/P3041/P5020 are /32. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-02-18 11:40:54 +00:00
#define CONFIG_SYS_FSL_TBCLK_DIV 32
powerpc/fsl_pci: Fix device tree fixups for newer platforms We assumed that only a small set of compatiable strings would be needed to find the PCIe device tree nodes to be fixed up. However on newer platforms the simple rules no longer work. We need to allow specifying the PCIe compatiable string for each individual SoC. We introduce CONFIG_SYS_FSL_PCIE_COMPAT for this purpose and set it if the default isn't sufficient. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-05-20 05:39:21 +00:00
#define CONFIG_SYS_FSL_PCIE_COMPAT "fsl,qoriq-pcie-v2.2"
powerpc/85xx: introduce and document CONFIG_SYS_CCSRBAR macros Introduce the CONFIG_SYS_CCSRBAR_PHYS_HIGH and CONFIG_SYS_CCSRBAR_PHYS_LOW macros, which contain the high and low portions of CONFIG_SYS_CCSRBAR_PHYS. This is necessary for the assembly-language code that relocates CCSR, since the assembler does not understand 64-bit constants. CONFIG_SYS_CCSRBAR_PHYS is automatically defined from the CONFIG_SYS_CCSRBAR_PHYS_HIGH and CONFIG_SYS_CCSRBAR_PHYS_LOW macros, so it should not be defined in a board header file. Similarly, CONFIG_SYS_CCSRBAR_DEFAULT is defined for each SOC in config_mpc85xx.h, so it should also not be defined in the board header file. CONFIG_SYS_CCSR_DO_NOT_RELOCATE is a "short-cut" macro that guarantees that CONFIG_SYS_CCSRBAR_PHYS is set to the same value as CONFIG_SYS_CCSRBAR_DEFAULT, and so CCSR will not be relocated. Since CONFIG_SYS_CCSRBAR_DEFAULT is locked to a fixed value, multi-stage U-Boot builds (e.g. NAND) are required to relocate CCSR only during the last stage (i.e. the "real" U-Boot). All other stages should define CONFIG_SYS_CCSR_DO_NOT_RELOCATE to ensure that CCSR is not relocated. README is updated with descriptions of all the CONFIG_SYS_CCSRBAR_xxx macros. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-08-04 23:03:41 +00:00
#define CONFIG_SYS_CCSRBAR_DEFAULT 0xfe000000
powerpc/85xx: Enable Internal USB PHY for p2040, p3041, p5010 and p5020 The P2040, P3041, P5010, and P5020 all have internal USB PHYs that we need to enable for them to function. Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-04-13 05:08:51 +00:00
#define CONFIG_SYS_FSL_USB1_PHY_ENABLE
#define CONFIG_SYS_FSL_USB2_PHY_ENABLE
powerpc/85xx: Enable internal USB UTMI PHY on p204x/p3041/p50x0 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-04-13 05:19:10 +00:00
#define CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY
powerpc/85xx: Enable ESDHC111 erratum on P2040/P3041/P5010/P5020 SoCs The workaround for ESDHC111 should also be applied on P2040/P3041/P5010/P5020 SoCs. Signed-off-by: Lei Xu <B33228@freescale.com> Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-04-19 07:28:41 +00:00
#define CONFIG_SYS_FSL_ERRATUM_ESDHC111
powerpc/85xx: Add workaround for erratum A-003474 Erratum A-003474: Internal DDR calibration circuit is not supported Impact: Experience shows no significant benefit to device operation with auto-calibration enabled versus it disabled. To ensure consistent timing results, Freescale recommends this feature be disabled in future customer products. There should be no impact to parts that are already operating in the field. Workaround: Prior to setting DDR_SDRAM_CFG[MEM_EN]=1, do the following: 1. Write a value of 0x0000_0015 to the register at offset CCSRBAR + DDR OFFSET + 0xf30 2. Write a value of 0x2400_0000 to the register at offset CCSRBAR + DDR OFFSET + 0xf54 Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-11-20 18:01:35 +00:00
#define CONFIG_SYS_FSL_ERRATUM_DDR_A003474
powerpc/srio: Rewrite the struct ccsr_rio Rewrite this struct for the support of two ports and two message units registers. Signed-off-by: Liu Gang <Gang.Liu@freescale.com>
2012-03-08 00:33:14 +00:00
#define CONFIG_SYS_FSL_SRIO_MAX_PORTS 2
#define CONFIG_SYS_FSL_SRIO_OB_WIN_NUM 9
#define CONFIG_SYS_FSL_SRIO_IB_WIN_NUM 5
powerpc/8xxx: Introduce 85xx, 86xx, QorIQ config headers Add new headers that capture common defines for a given SoC/processor rather than duplicating that information in board config.h and random other places. Eventually this should be handled by Kconfig & defconfigs Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Acked-by: Wolfgang Denk <wd@denx.de>
2011-01-19 09:05:26 +00:00
#elif defined(CONFIG_PPC_P5020)
#define CONFIG_MAX_CPUS 2
powerpc/85xx: Fixup determining PME, FMan freq On CoreNet based SoCs (P2040, P3041, P4080, P5020) we have some additional rules to determining the various frequencies that PME & FMan IP blocks run at. We need to take into account: * Reduced number of Core Complex PLL clusters * HWA_ASYNC_DIV (allows for /2 or /4 options) On P2040/P3041/P5020 we only have 2 Core Complex PLLs and in such SoCs the PME & FMan blocks utilize the second Core Complex PLL. On SoCs like p4080 with 4 Core Complex PLLs we utilize the third Core Complex PLL for PME & FMan blocks. On P2040/P3041/P5020 we have the added feature that we can divide the PLL down further by either /2 or /4 based on HWA_ASYNC_DIV. On P4080 this options doesn't exist, however HWA_ASYNC_DIV field in RCW should be set to 0 and this gets a backward compatiable /2 behavior. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-02-16 08:03:29 +00:00
#define CONFIG_SYS_FSL_NUM_CC_PLLS 2
powerpc/8xxx: Introduce 85xx, 86xx, QorIQ config headers Add new headers that capture common defines for a given SoC/processor rather than duplicating that information in board config.h and random other places. Eventually this should be handled by Kconfig & defconfigs Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Acked-by: Wolfgang Denk <wd@denx.de>
2011-01-19 09:05:26 +00:00
#define CONFIG_SYS_FSL_NUM_LAWS 32
#define CONFIG_SYS_FSL_SEC_COMPAT 4
powerpc/85xx: CONFIG_FSL_SATA_V2 should be defined in config_mpc85xx.h Macro CONFIG_FSL_SATA_V2 is defined if the SOC has a V2 Freescale SATA controller, so it should be defined in config_mpc85xx.h instead of the various board header files. So now CONFIG_FSL_SATA_V2 is always defined on the P1013, P1022, P2041, P3041, P5010, and P5020. It was already defined for the P1010 and P1014. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-11-21 23:10:22 +00:00
#define CONFIG_FSL_SATA_V2
powerpc/85xx: Add some defines for P2040, P3041, P5010, P5020 Specify the number of DDR controllers, number of frame managers, number of 1g and 10g ports. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-01-25 18:42:32 +00:00
#define CONFIG_SYS_NUM_FMAN 1
#define CONFIG_SYS_NUM_FM1_DTSEC 5
#define CONFIG_SYS_NUM_FM1_10GEC 1
#define CONFIG_NUM_DDR_CONTROLLERS 2
powerpc/85xx: Specify CONFIG_SYS_FM_MURAM_SIZE CONFIG_SYS_FM_MURAM_SIZE varies from SoC to SoC to specify it in config_mpc85xx.h for those parts with a Frame Manager. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-02-04 06:43:34 +00:00
#define CONFIG_SYS_FM_MURAM_SIZE 0x28000
powerpc/85xx: Change timebase divisor to be defined per processor Introduce new CONFIG_SYS_FSL_TBCLK_DIV on 85xx platforms because different SoCs have different divisor amounts. All the PQ3 parts are /8, the P4080/P4080 is /16, and P2040/P3041/P5020 are /32. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-02-18 11:40:54 +00:00
#define CONFIG_SYS_FSL_TBCLK_DIV 32
powerpc/fsl_pci: Fix device tree fixups for newer platforms We assumed that only a small set of compatiable strings would be needed to find the PCIe device tree nodes to be fixed up. However on newer platforms the simple rules no longer work. We need to allow specifying the PCIe compatiable string for each individual SoC. We introduce CONFIG_SYS_FSL_PCIE_COMPAT for this purpose and set it if the default isn't sufficient. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-05-20 05:39:21 +00:00
#define CONFIG_SYS_FSL_PCIE_COMPAT "fsl,qoriq-pcie-v2.2"
powerpc/85xx: introduce and document CONFIG_SYS_CCSRBAR macros Introduce the CONFIG_SYS_CCSRBAR_PHYS_HIGH and CONFIG_SYS_CCSRBAR_PHYS_LOW macros, which contain the high and low portions of CONFIG_SYS_CCSRBAR_PHYS. This is necessary for the assembly-language code that relocates CCSR, since the assembler does not understand 64-bit constants. CONFIG_SYS_CCSRBAR_PHYS is automatically defined from the CONFIG_SYS_CCSRBAR_PHYS_HIGH and CONFIG_SYS_CCSRBAR_PHYS_LOW macros, so it should not be defined in a board header file. Similarly, CONFIG_SYS_CCSRBAR_DEFAULT is defined for each SOC in config_mpc85xx.h, so it should also not be defined in the board header file. CONFIG_SYS_CCSR_DO_NOT_RELOCATE is a "short-cut" macro that guarantees that CONFIG_SYS_CCSRBAR_PHYS is set to the same value as CONFIG_SYS_CCSRBAR_DEFAULT, and so CCSR will not be relocated. Since CONFIG_SYS_CCSRBAR_DEFAULT is locked to a fixed value, multi-stage U-Boot builds (e.g. NAND) are required to relocate CCSR only during the last stage (i.e. the "real" U-Boot). All other stages should define CONFIG_SYS_CCSR_DO_NOT_RELOCATE to ensure that CCSR is not relocated. README is updated with descriptions of all the CONFIG_SYS_CCSRBAR_xxx macros. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-08-04 23:03:41 +00:00
#define CONFIG_SYS_CCSRBAR_DEFAULT 0xfe000000
powerpc/85xx: Enable Internal USB PHY for p2040, p3041, p5010 and p5020 The P2040, P3041, P5010, and P5020 all have internal USB PHYs that we need to enable for them to function. Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-04-13 05:08:51 +00:00
#define CONFIG_SYS_FSL_USB1_PHY_ENABLE
#define CONFIG_SYS_FSL_USB2_PHY_ENABLE
powerpc/85xx: Enable internal USB UTMI PHY on p204x/p3041/p50x0 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-04-13 05:19:10 +00:00
#define CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY
powerpc/85xx: Enable ESDHC111 erratum on P2040/P3041/P5010/P5020 SoCs The workaround for ESDHC111 should also be applied on P2040/P3041/P5010/P5020 SoCs. Signed-off-by: Lei Xu <B33228@freescale.com> Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-04-19 07:28:41 +00:00
#define CONFIG_SYS_FSL_ERRATUM_ESDHC111
powerpc/85xx: Add workaround for erratum A-003474 Erratum A-003474: Internal DDR calibration circuit is not supported Impact: Experience shows no significant benefit to device operation with auto-calibration enabled versus it disabled. To ensure consistent timing results, Freescale recommends this feature be disabled in future customer products. There should be no impact to parts that are already operating in the field. Workaround: Prior to setting DDR_SDRAM_CFG[MEM_EN]=1, do the following: 1. Write a value of 0x0000_0015 to the register at offset CCSRBAR + DDR OFFSET + 0xf30 2. Write a value of 0x2400_0000 to the register at offset CCSRBAR + DDR OFFSET + 0xf54 Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-11-20 18:01:35 +00:00
#define CONFIG_SYS_FSL_ERRATUM_DDR_A003474
powerpc/srio: Rewrite the struct ccsr_rio Rewrite this struct for the support of two ports and two message units registers. Signed-off-by: Liu Gang <Gang.Liu@freescale.com>
2012-03-08 00:33:14 +00:00
#define CONFIG_SYS_FSL_SRIO_MAX_PORTS 2
#define CONFIG_SYS_FSL_SRIO_OB_WIN_NUM 9
#define CONFIG_SYS_FSL_SRIO_IB_WIN_NUM 5
powerpc/8xxx: Introduce 85xx, 86xx, QorIQ config headers Add new headers that capture common defines for a given SoC/processor rather than duplicating that information in board config.h and random other places. Eventually this should be handled by Kconfig & defconfigs Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Acked-by: Wolfgang Denk <wd@denx.de>
2011-01-19 09:05:26 +00:00
powerpc/mpc85xx:Add BSC9131/BSC9130/BSC9231 Processor Support - BSC9131 is integrated device that targets Femto base station market. It combines Power Architecture e500v2 and DSP StarCore SC3850 core technologies with MAPLE-B2F baseband acceleration processing elements. - BSC9130 is exactly same as BSC9131 except that the max e500v2 core and DSP core frequencies are 800M(these are 1G in case of 9131). - BSC9231 is similar to BSC9131 except no MAPLE The BSC9131 SoC includes the following function and features: . Power Architecture subsystem including a e500 processor with 256-Kbyte shared L2 cache . StarCore SC3850 DSP subsystem with a 512-Kbyte private L2 cache . The Multi Accelerator Platform Engine for Femto BaseStation Baseband Processing (MAPLE-B2F) . A multi-standard baseband algorithm accelerator for Channel Decoding/Encoding, Fourier Transforms, UMTS chip rate processing, LTE UP/DL Channel processing, and CRC algorithms . Consists of accelerators for Convolution, Filtering, Turbo Encoding, Turbo Decoding, Viterbi decoding, Chiprate processing, and Matrix Inversion operations . DDR3/3L memory interface with 32-bit data width without ECC and 16-bit with ECC, up to 400-MHz clock/800 MHz data rate . Dedicated security engine featuring trusted boot . DMA controller . OCNDMA with four bidirectional channels . Interfaces . Two triple-speed Gigabit Ethernet controllers featuring network acceleration including IEEE 1588. v2 hardware support and virtualization (eTSEC) . eTSEC 1 supports RGMII/RMII . eTSEC 2 supports RGMII . High-speed USB 2.0 host and device controller with ULPI interface . Enhanced secure digital (SD/MMC) host controller (eSDHC) . Antenna interface controller (AIC), supporting three industry standard JESD207/three custom ADI RF interfaces (two dual port and one single port) and three MAXIM's MaxPHY serial interfaces . ADI lanes support both full duplex FDD support and half duplex TDD support . Universal Subscriber Identity Module (USIM) interface that facilitates communication to SIM cards or Eurochip pre-paid phone cards . TDM with one TDM port . Two DUART, four eSPI, and two I2C controllers . Integrated Flash memory controller (IFC) . TDM with 256 channels . GPIO . Sixteen 32-bit timers The DSP portion of the SoC consists of DSP core (SC3850) and various accelerators pertaining to DSP operations. This patch takes care of code pertaining to power side functionality only. Signed-off-by: Ramneek Mehresh <ramneek.mehresh@freescale.com> Signed-off-by: Priyanka Jain <Priyanka.Jain@freescale.com> Signed-off-by: Akhil Goyal <Akhil.Goyal@freescale.com> Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com> Signed-off-by: Rajan Srivastava <rajan.srivastava@freescale.com> Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
2012-04-24 20:16:49 +00:00
#elif defined(CONFIG_BSC9131)
#define CONFIG_MAX_CPUS 1
#define CONFIG_FSL_SDHC_V2_3
#define CONFIG_SYS_FSL_NUM_LAWS 12
#define CONFIG_TSECV2
#define CONFIG_SYS_FSL_SEC_COMPAT 4
#define CONFIG_NUM_DDR_CONTROLLERS 1
#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000
#define CONFIG_NAND_FSL_IFC
#define CONFIG_SYS_FSL_ERRATUM_IFC_A003399
#define CONFIG_SYS_FSL_ERRATUM_ESDHC111
powerpc/8xxx: Introduce 85xx, 86xx, QorIQ config headers Add new headers that capture common defines for a given SoC/processor rather than duplicating that information in board config.h and random other places. Eventually this should be handled by Kconfig & defconfigs Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Acked-by: Wolfgang Denk <wd@denx.de>
2011-01-19 09:05:26 +00:00
#else
#error Processor type not defined for this platform
#endif
powerpc/85xx: introduce and document CONFIG_SYS_CCSRBAR macros Introduce the CONFIG_SYS_CCSRBAR_PHYS_HIGH and CONFIG_SYS_CCSRBAR_PHYS_LOW macros, which contain the high and low portions of CONFIG_SYS_CCSRBAR_PHYS. This is necessary for the assembly-language code that relocates CCSR, since the assembler does not understand 64-bit constants. CONFIG_SYS_CCSRBAR_PHYS is automatically defined from the CONFIG_SYS_CCSRBAR_PHYS_HIGH and CONFIG_SYS_CCSRBAR_PHYS_LOW macros, so it should not be defined in a board header file. Similarly, CONFIG_SYS_CCSRBAR_DEFAULT is defined for each SOC in config_mpc85xx.h, so it should also not be defined in the board header file. CONFIG_SYS_CCSR_DO_NOT_RELOCATE is a "short-cut" macro that guarantees that CONFIG_SYS_CCSRBAR_PHYS is set to the same value as CONFIG_SYS_CCSRBAR_DEFAULT, and so CCSR will not be relocated. Since CONFIG_SYS_CCSRBAR_DEFAULT is locked to a fixed value, multi-stage U-Boot builds (e.g. NAND) are required to relocate CCSR only during the last stage (i.e. the "real" U-Boot). All other stages should define CONFIG_SYS_CCSR_DO_NOT_RELOCATE to ensure that CCSR is not relocated. README is updated with descriptions of all the CONFIG_SYS_CCSRBAR_xxx macros. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-08-04 23:03:41 +00:00
#ifndef CONFIG_SYS_CCSRBAR_DEFAULT
#error "CONFIG_SYS_CCSRBAR_DEFAULT is not defined for this platform."
#endif
powerpc/8xxx: Introduce 85xx, 86xx, QorIQ config headers Add new headers that capture common defines for a given SoC/processor rather than duplicating that information in board config.h and random other places. Eventually this should be handled by Kconfig & defconfigs Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Acked-by: Wolfgang Denk <wd@denx.de>
2011-01-19 09:05:26 +00:00
#endif /* _ASM_MPC85xx_CONFIG_H_ */
Reference in a new issue Copy permalink