u-boot/arch/arm/cpu/arm926ejs/at91/at91sam9263_devices.c

/*
 * (C) Copyright 2007-2008
 * Stelian Pop <stelian@popies.net>
 * Lead Tech Design <www.leadtechdesign.com>
 *
 * (C) Copyright 2009-2011
 * Daniel Gorsulowski <daniel.gorsulowski@esd.eu>
 * esd electronic system design gmbh <www.esd.eu>
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#include <common.h>
#include <asm/io.h>
#include <asm/arch/at91_common.h>
#include <asm/arch/at91_pmc.h>
#include <asm/arch/gpio.h>

/*
 * if CONFIG_AT91_GPIO_PULLUP ist set, keep pullups on on all
 * peripheral pins. Good to have if hardware is soldered optionally
 * or in case of SPI no slave is selected. Avoid lines to float
 * needlessly. Use a short local PUP define.
 *
 * Due to errata "TXD floats when CTS is inactive" pullups are always
 * on for TXD pins.
 */
#ifdef CONFIG_AT91_GPIO_PULLUP
# define PUP CONFIG_AT91_GPIO_PULLUP
#else
# define PUP 0
#endif

void at91_serial0_hw_init(void)
{
	at91_pmc_t	*pmc	= (at91_pmc_t *) ATMEL_BASE_PMC;

	at91_set_a_periph(AT91_PIO_PORTA, 26, 1);		/* TXD0 */
	at91_set_a_periph(AT91_PIO_PORTA, 27, PUP);		/* RXD0 */
	writel(1 << ATMEL_ID_USART0, &pmc->pcer);
}

void at91_serial1_hw_init(void)
{
	at91_pmc_t	*pmc	= (at91_pmc_t *) ATMEL_BASE_PMC;

	at91_set_a_periph(AT91_PIO_PORTD, 0, 1);		/* TXD1 */
	at91_set_a_periph(AT91_PIO_PORTD, 1, PUP);		/* RXD1 */
	writel(1 << ATMEL_ID_USART1, &pmc->pcer);
}

void at91_serial2_hw_init(void)
{
	at91_pmc_t	*pmc	= (at91_pmc_t *) ATMEL_BASE_PMC;

	at91_set_a_periph(AT91_PIO_PORTD, 2, 1);		/* TXD2 */
	at91_set_a_periph(AT91_PIO_PORTD, 3, PUP);		/* RXD2 */
	writel(1 << ATMEL_ID_USART2, &pmc->pcer);
}

void at91_seriald_hw_init(void)
{
	at91_pmc_t	*pmc	= (at91_pmc_t *) ATMEL_BASE_PMC;

	at91_set_a_periph(AT91_PIO_PORTC, 30, PUP);		/* DRXD */
	at91_set_a_periph(AT91_PIO_PORTC, 31, 1);		/* DTXD */
	writel(1 << ATMEL_ID_SYS, &pmc->pcer);
}

#if defined(CONFIG_HAS_DATAFLASH) || defined(CONFIG_ATMEL_SPI)
void at91_spi0_hw_init(unsigned long cs_mask)
{
	at91_pmc_t	*pmc	= (at91_pmc_t *) ATMEL_BASE_PMC;

	at91_set_b_periph(AT91_PIO_PORTA, 0, PUP);	/* SPI0_MISO */
	at91_set_b_periph(AT91_PIO_PORTA, 1, PUP);	/* SPI0_MOSI */
	at91_set_b_periph(AT91_PIO_PORTA, 2, PUP);	/* SPI0_SPCK */

	/* Enable clock */
	writel(1 << ATMEL_ID_SPI0, &pmc->pcer);

	if (cs_mask & (1 << 0)) {
		at91_set_b_periph(AT91_PIO_PORTA, 5, 1);
	}
	if (cs_mask & (1 << 1)) {
		at91_set_b_periph(AT91_PIO_PORTA, 3, 1);
	}
	if (cs_mask & (1 << 2)) {
		at91_set_b_periph(AT91_PIO_PORTA, 4, 1);
	}
	if (cs_mask & (1 << 3)) {
		at91_set_b_periph(AT91_PIO_PORTB, 11, 1);
	}
	if (cs_mask & (1 << 4)) {
		at91_set_pio_output(AT91_PIO_PORTA, 5, 1);
	}
	if (cs_mask & (1 << 5)) {
		at91_set_pio_output(AT91_PIO_PORTA, 3, 1);
	}
	if (cs_mask & (1 << 6)) {
		at91_set_pio_output(AT91_PIO_PORTA, 4, 1);
	}
	if (cs_mask & (1 << 7)) {
		at91_set_pio_output(AT91_PIO_PORTB, 11, 1);
	}
}

void at91_spi1_hw_init(unsigned long cs_mask)
{
	at91_pmc_t	*pmc	= (at91_pmc_t *) ATMEL_BASE_PMC;

	at91_set_a_periph(AT91_PIO_PORTB, 12, PUP);	/* SPI1_MISO */
	at91_set_a_periph(AT91_PIO_PORTB, 13, PUP);	/* SPI1_MOSI */
	at91_set_a_periph(AT91_PIO_PORTB, 14, PUP);	/* SPI1_SPCK */

	/* Enable clock */
	writel(1 << ATMEL_ID_SPI1, &pmc->pcer);

	if (cs_mask & (1 << 0)) {
		at91_set_a_periph(AT91_PIO_PORTB, 15, 1);
	}
	if (cs_mask & (1 << 1)) {
		at91_set_a_periph(AT91_PIO_PORTB, 16, 1);
	}
	if (cs_mask & (1 << 2)) {
		at91_set_a_periph(AT91_PIO_PORTB, 17, 1);
	}
	if (cs_mask & (1 << 3)) {
		at91_set_a_periph(AT91_PIO_PORTB, 18, 1);
	}
	if (cs_mask & (1 << 4)) {
		at91_set_pio_output(AT91_PIO_PORTB, 15, 1);
	}
	if (cs_mask & (1 << 5)) {
		at91_set_pio_output(AT91_PIO_PORTB, 16, 1);
	}
	if (cs_mask & (1 << 6)) {
		at91_set_pio_output(AT91_PIO_PORTB, 17, 1);
	}
	if (cs_mask & (1 << 7)) {
		at91_set_pio_output(AT91_PIO_PORTB, 18, 1);
	}
}
#endif

#if defined(CONFIG_GENERIC_ATMEL_MCI)
void at91_mci_hw_init(void)
{
	/* Enable mci clock */
	struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
	writel(1 << ATMEL_ID_MCI1, &pmc->pcer);

	at91_set_a_periph(AT91_PIO_PORTA, 6, PUP);	/* MCI1_CK */

#if defined(CONFIG_ATMEL_MCI_PORTB)
	at91_set_a_periph(AT91_PIO_PORTA, 21, PUP);	/* MCI1_CDB */
	at91_set_a_periph(AT91_PIO_PORTA, 22, PUP);	/* MCI1_DB0 */
	at91_set_a_periph(AT91_PIO_PORTA, 23, PUP);	/* MCI1_DB1 */
	at91_set_a_periph(AT91_PIO_PORTA, 24, PUP);	/* MCI1_DB2 */
	at91_set_a_periph(AT91_PIO_PORTA, 25, PUP);	/* MCI1_DB3 */
#else
	at91_set_a_periph(AT91_PIO_PORTA, 7, PUP);	/* MCI1_CDA */
	at91_set_a_periph(AT91_PIO_PORTA, 8, PUP);	/* MCI1_DA0 */
	at91_set_a_periph(AT91_PIO_PORTA, 9, PUP);	/* MCI1_DA1 */
	at91_set_a_periph(AT91_PIO_PORTA, 10, PUP);	/* MCI1_DA2 */
	at91_set_a_periph(AT91_PIO_PORTA, 11, PUP);	/* MCI1_DA3 */
#endif
}
#endif

#ifdef CONFIG_MACB
void at91_macb_hw_init(void)
{
	at91_set_a_periph(AT91_PIO_PORTE, 21, 0);	/* ETXCK_EREFCK */
	at91_set_b_periph(AT91_PIO_PORTC, 25, 0);	/* ERXDV */
	at91_set_a_periph(AT91_PIO_PORTE, 25, 0);	/* ERX0 */
	at91_set_a_periph(AT91_PIO_PORTE, 26, 0);	/* ERX1 */
	at91_set_a_periph(AT91_PIO_PORTE, 27, 0);	/* ERXER */
	at91_set_a_periph(AT91_PIO_PORTE, 28, 0);	/* ETXEN */
	at91_set_a_periph(AT91_PIO_PORTE, 23, 0);	/* ETX0 */
	at91_set_a_periph(AT91_PIO_PORTE, 24, 0);	/* ETX1 */
	at91_set_a_periph(AT91_PIO_PORTE, 30, 0);	/* EMDIO */
	at91_set_a_periph(AT91_PIO_PORTE, 29, 0);	/* EMDC */

#ifndef CONFIG_RMII
	at91_set_a_periph(AT91_PIO_PORTE, 22, 0);	/* ECRS */
	at91_set_b_periph(AT91_PIO_PORTC, 26, 0);	/* ECOL */
	at91_set_b_periph(AT91_PIO_PORTC, 22, 0);	/* ERX2 */
	at91_set_b_periph(AT91_PIO_PORTC, 23, 0);	/* ERX3 */
	at91_set_b_periph(AT91_PIO_PORTC, 27, 0);	/* ERXCK */
	at91_set_b_periph(AT91_PIO_PORTC, 20, 0);	/* ETX2 */
	at91_set_b_periph(AT91_PIO_PORTC, 21, 0);	/* ETX3 */
	at91_set_b_periph(AT91_PIO_PORTC, 24, 0);	/* ETXER */
#endif
}
#endif

#ifdef CONFIG_USB_OHCI_NEW
void at91_uhp_hw_init(void)
{
	/* Enable VBus on UHP ports */
	at91_set_pio_output(AT91_PIO_PORTA, 21, 0);
	at91_set_pio_output(AT91_PIO_PORTA, 24, 0);
}
#endif

#ifdef CONFIG_AT91_CAN
void at91_can_hw_init(void)
{
	at91_pmc_t	*pmc	= (at91_pmc_t *) ATMEL_BASE_PMC;

	at91_set_a_periph(AT91_PIO_PORTA, 13, 0);	/* CAN_TX */
	at91_set_a_periph(AT91_PIO_PORTA, 14, 1);	/* CAN_RX */

	/* Enable clock */
	writel(1 << ATMEL_ID_CAN, &pmc->pcer);
}
#endif