mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-12 22:33:18 +00:00
574 lines
14 KiB
Text
574 lines
14 KiB
Text
|
// SPDX-License-Identifier: GPL-2.0-only
|
||
|
/*
|
||
|
* Copyright (C) 2011-2013 Texas Instruments Incorporated - http://www.ti.com/
|
||
|
*/
|
||
|
#include <dt-bindings/input/input.h>
|
||
|
#include "elpida_ecb240abacn.dtsi"
|
||
|
#include "omap4-mcpdm.dtsi"
|
||
|
|
||
|
/ {
|
||
|
memory@80000000 {
|
||
|
device_type = "memory";
|
||
|
reg = <0x80000000 0x40000000>; /* 1 GB */
|
||
|
};
|
||
|
|
||
|
chosen {
|
||
|
stdout-path = &uart3;
|
||
|
};
|
||
|
|
||
|
aliases {
|
||
|
display0 = &dvi0;
|
||
|
display1 = &hdmi0;
|
||
|
ethernet = ðernet;
|
||
|
};
|
||
|
|
||
|
leds: leds {
|
||
|
compatible = "gpio-leds";
|
||
|
pinctrl-names = "default";
|
||
|
pinctrl-0 = <
|
||
|
&led_wkgpio_pins
|
||
|
>;
|
||
|
|
||
|
heartbeat {
|
||
|
label = "pandaboard::status1";
|
||
|
gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
|
||
|
linux,default-trigger = "heartbeat";
|
||
|
};
|
||
|
|
||
|
mmc {
|
||
|
label = "pandaboard::status2";
|
||
|
gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
|
||
|
linux,default-trigger = "mmc0";
|
||
|
};
|
||
|
};
|
||
|
|
||
|
gpio_keys: gpio_keys {
|
||
|
compatible = "gpio-keys";
|
||
|
pinctrl-names = "default";
|
||
|
pinctrl-0 = <
|
||
|
&button_pins
|
||
|
>;
|
||
|
|
||
|
buttonS2 {
|
||
|
label = "button S2";
|
||
|
gpios = <&gpio4 25 GPIO_ACTIVE_LOW>; /* gpio_121 */
|
||
|
linux,code = <BTN_0>;
|
||
|
wakeup-source;
|
||
|
};
|
||
|
};
|
||
|
|
||
|
sound: sound {
|
||
|
compatible = "ti,abe-twl6040";
|
||
|
ti,model = "PandaBoard";
|
||
|
|
||
|
ti,mclk-freq = <38400000>;
|
||
|
|
||
|
ti,mcpdm = <&mcpdm>;
|
||
|
|
||
|
ti,twl6040 = <&twl6040>;
|
||
|
|
||
|
/* Audio routing */
|
||
|
ti,audio-routing =
|
||
|
"Headset Stereophone", "HSOL",
|
||
|
"Headset Stereophone", "HSOR",
|
||
|
"Ext Spk", "HFL",
|
||
|
"Ext Spk", "HFR",
|
||
|
"Line Out", "AUXL",
|
||
|
"Line Out", "AUXR",
|
||
|
"HSMIC", "Headset Mic",
|
||
|
"Headset Mic", "Headset Mic Bias",
|
||
|
"AFML", "Line In",
|
||
|
"AFMR", "Line In";
|
||
|
};
|
||
|
|
||
|
/* HS USB Port 1 Power */
|
||
|
hsusb1_power: hsusb1_power_reg {
|
||
|
compatible = "regulator-fixed";
|
||
|
regulator-name = "hsusb1_vbus";
|
||
|
regulator-min-microvolt = <3300000>;
|
||
|
regulator-max-microvolt = <3300000>;
|
||
|
gpio = <&gpio1 1 GPIO_ACTIVE_HIGH>; /* gpio_1 */
|
||
|
startup-delay-us = <70000>;
|
||
|
enable-active-high;
|
||
|
/*
|
||
|
* boot-on is required along with always-on as the
|
||
|
* regulator framework doesn't enable the regulator
|
||
|
* if boot-on is not there.
|
||
|
*/
|
||
|
regulator-always-on;
|
||
|
regulator-boot-on;
|
||
|
};
|
||
|
|
||
|
/* HS USB Host PHY on PORT 1 */
|
||
|
hsusb1_phy: hsusb1_phy {
|
||
|
compatible = "usb-nop-xceiv";
|
||
|
reset-gpios = <&gpio2 30 GPIO_ACTIVE_LOW>; /* gpio_62 */
|
||
|
#phy-cells = <0>;
|
||
|
vcc-supply = <&hsusb1_power>;
|
||
|
clocks = <&auxclk3_ck>;
|
||
|
clock-names = "main_clk";
|
||
|
clock-frequency = <19200000>;
|
||
|
};
|
||
|
|
||
|
/* regulator for wl12xx on sdio5 */
|
||
|
wl12xx_vmmc: wl12xx_vmmc {
|
||
|
pinctrl-names = "default";
|
||
|
pinctrl-0 = <&wl12xx_gpio>;
|
||
|
compatible = "regulator-fixed";
|
||
|
regulator-name = "vwl1271";
|
||
|
regulator-min-microvolt = <1800000>;
|
||
|
regulator-max-microvolt = <1800000>;
|
||
|
gpio = <&gpio2 11 GPIO_ACTIVE_HIGH>;
|
||
|
startup-delay-us = <70000>;
|
||
|
enable-active-high;
|
||
|
};
|
||
|
|
||
|
tfp410: encoder0 {
|
||
|
compatible = "ti,tfp410";
|
||
|
powerdown-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>; /* gpio_0 */
|
||
|
|
||
|
ports {
|
||
|
#address-cells = <1>;
|
||
|
#size-cells = <0>;
|
||
|
|
||
|
port@0 {
|
||
|
reg = <0>;
|
||
|
|
||
|
tfp410_in: endpoint {
|
||
|
remote-endpoint = <&dpi_out>;
|
||
|
};
|
||
|
};
|
||
|
|
||
|
port@1 {
|
||
|
reg = <1>;
|
||
|
|
||
|
tfp410_out: endpoint {
|
||
|
remote-endpoint = <&dvi_connector_in>;
|
||
|
};
|
||
|
};
|
||
|
};
|
||
|
};
|
||
|
|
||
|
dvi0: connector0 {
|
||
|
compatible = "dvi-connector";
|
||
|
label = "dvi";
|
||
|
|
||
|
digital;
|
||
|
|
||
|
ddc-i2c-bus = <&i2c3>;
|
||
|
|
||
|
port {
|
||
|
dvi_connector_in: endpoint {
|
||
|
remote-endpoint = <&tfp410_out>;
|
||
|
};
|
||
|
};
|
||
|
};
|
||
|
|
||
|
tpd12s015: encoder1 {
|
||
|
compatible = "ti,tpd12s015";
|
||
|
|
||
|
gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>, /* 60, CT CP HPD */
|
||
|
<&gpio2 9 GPIO_ACTIVE_HIGH>, /* 41, LS OE */
|
||
|
<&gpio2 31 GPIO_ACTIVE_HIGH>; /* 63, HPD */
|
||
|
|
||
|
ports {
|
||
|
#address-cells = <1>;
|
||
|
#size-cells = <0>;
|
||
|
|
||
|
port@0 {
|
||
|
reg = <0>;
|
||
|
|
||
|
tpd12s015_in: endpoint {
|
||
|
remote-endpoint = <&hdmi_out>;
|
||
|
};
|
||
|
};
|
||
|
|
||
|
port@1 {
|
||
|
reg = <1>;
|
||
|
|
||
|
tpd12s015_out: endpoint {
|
||
|
remote-endpoint = <&hdmi_connector_in>;
|
||
|
};
|
||
|
};
|
||
|
};
|
||
|
};
|
||
|
|
||
|
hdmi0: connector1 {
|
||
|
compatible = "hdmi-connector";
|
||
|
label = "hdmi";
|
||
|
|
||
|
type = "a";
|
||
|
|
||
|
port {
|
||
|
hdmi_connector_in: endpoint {
|
||
|
remote-endpoint = <&tpd12s015_out>;
|
||
|
};
|
||
|
};
|
||
|
};
|
||
|
};
|
||
|
|
||
|
&omap4_pmx_core {
|
||
|
pinctrl-names = "default";
|
||
|
pinctrl-0 = <
|
||
|
&dss_dpi_pins
|
||
|
&tfp410_pins
|
||
|
&dss_hdmi_pins
|
||
|
&tpd12s015_pins
|
||
|
&hsusbb1_pins
|
||
|
>;
|
||
|
|
||
|
twl6040_pins: pinmux_twl6040_pins {
|
||
|
pinctrl-single,pins = <
|
||
|
OMAP4_IOPAD(0x120, PIN_OUTPUT | MUX_MODE3) /* hdq_sio.gpio_127 */
|
||
|
OMAP4_IOPAD(0x1a0, PIN_INPUT | MUX_MODE0) /* sys_nirq2.sys_nirq2 */
|
||
|
>;
|
||
|
};
|
||
|
|
||
|
mcbsp1_pins: pinmux_mcbsp1_pins {
|
||
|
pinctrl-single,pins = <
|
||
|
OMAP4_IOPAD(0x0fe, PIN_INPUT | MUX_MODE0) /* abe_mcbsp1_clkx.abe_mcbsp1_clkx */
|
||
|
OMAP4_IOPAD(0x100, PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_mcbsp1_dr.abe_mcbsp1_dr */
|
||
|
OMAP4_IOPAD(0x102, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* abe_mcbsp1_dx.abe_mcbsp1_dx */
|
||
|
OMAP4_IOPAD(0x104, PIN_INPUT | MUX_MODE0) /* abe_mcbsp1_fsx.abe_mcbsp1_fsx */
|
||
|
>;
|
||
|
};
|
||
|
|
||
|
dss_dpi_pins: pinmux_dss_dpi_pins {
|
||
|
pinctrl-single,pins = <
|
||
|
OMAP4_IOPAD(0x162, PIN_OUTPUT | MUX_MODE5) /* dispc2_data23 */
|
||
|
OMAP4_IOPAD(0x164, PIN_OUTPUT | MUX_MODE5) /* dispc2_data22 */
|
||
|
OMAP4_IOPAD(0x166, PIN_OUTPUT | MUX_MODE5) /* dispc2_data21 */
|
||
|
OMAP4_IOPAD(0x168, PIN_OUTPUT | MUX_MODE5) /* dispc2_data20 */
|
||
|
OMAP4_IOPAD(0x16a, PIN_OUTPUT | MUX_MODE5) /* dispc2_data19 */
|
||
|
OMAP4_IOPAD(0x16c, PIN_OUTPUT | MUX_MODE5) /* dispc2_data18 */
|
||
|
OMAP4_IOPAD(0x16e, PIN_OUTPUT | MUX_MODE5) /* dispc2_data15 */
|
||
|
OMAP4_IOPAD(0x170, PIN_OUTPUT | MUX_MODE5) /* dispc2_data14 */
|
||
|
OMAP4_IOPAD(0x172, PIN_OUTPUT | MUX_MODE5) /* dispc2_data13 */
|
||
|
OMAP4_IOPAD(0x174, PIN_OUTPUT | MUX_MODE5) /* dispc2_data12 */
|
||
|
OMAP4_IOPAD(0x176, PIN_OUTPUT | MUX_MODE5) /* dispc2_data11 */
|
||
|
|
||
|
OMAP4_IOPAD(0x1b4, PIN_OUTPUT | MUX_MODE5) /* dispc2_data10 */
|
||
|
OMAP4_IOPAD(0x1b6, PIN_OUTPUT | MUX_MODE5) /* dispc2_data9 */
|
||
|
OMAP4_IOPAD(0x1b8, PIN_OUTPUT | MUX_MODE5) /* dispc2_data16 */
|
||
|
OMAP4_IOPAD(0x1ba, PIN_OUTPUT | MUX_MODE5) /* dispc2_data17 */
|
||
|
OMAP4_IOPAD(0x1bc, PIN_OUTPUT | MUX_MODE5) /* dispc2_hsync */
|
||
|
OMAP4_IOPAD(0x1be, PIN_OUTPUT | MUX_MODE5) /* dispc2_pclk */
|
||
|
OMAP4_IOPAD(0x1c0, PIN_OUTPUT | MUX_MODE5) /* dispc2_vsync */
|
||
|
OMAP4_IOPAD(0x1c2, PIN_OUTPUT | MUX_MODE5) /* dispc2_de */
|
||
|
OMAP4_IOPAD(0x1c4, PIN_OUTPUT | MUX_MODE5) /* dispc2_data8 */
|
||
|
OMAP4_IOPAD(0x1c6, PIN_OUTPUT | MUX_MODE5) /* dispc2_data7 */
|
||
|
OMAP4_IOPAD(0x1c8, PIN_OUTPUT | MUX_MODE5) /* dispc2_data6 */
|
||
|
OMAP4_IOPAD(0x1ca, PIN_OUTPUT | MUX_MODE5) /* dispc2_data5 */
|
||
|
OMAP4_IOPAD(0x1cc, PIN_OUTPUT | MUX_MODE5) /* dispc2_data4 */
|
||
|
OMAP4_IOPAD(0x1ce, PIN_OUTPUT | MUX_MODE5) /* dispc2_data3 */
|
||
|
|
||
|
OMAP4_IOPAD(0x1d0, PIN_OUTPUT | MUX_MODE5) /* dispc2_data2 */
|
||
|
OMAP4_IOPAD(0x1d2, PIN_OUTPUT | MUX_MODE5) /* dispc2_data1 */
|
||
|
OMAP4_IOPAD(0x1d4, PIN_OUTPUT | MUX_MODE5) /* dispc2_data0 */
|
||
|
>;
|
||
|
};
|
||
|
|
||
|
tfp410_pins: pinmux_tfp410_pins {
|
||
|
pinctrl-single,pins = <
|
||
|
OMAP4_IOPAD(0x184, PIN_OUTPUT | MUX_MODE3) /* gpio_0 */
|
||
|
>;
|
||
|
};
|
||
|
|
||
|
dss_hdmi_pins: pinmux_dss_hdmi_pins {
|
||
|
pinctrl-single,pins = <
|
||
|
OMAP4_IOPAD(0x09a, PIN_INPUT | MUX_MODE0) /* hdmi_cec.hdmi_cec */
|
||
|
OMAP4_IOPAD(0x09c, PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_scl.hdmi_scl */
|
||
|
OMAP4_IOPAD(0x09e, PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_sda.hdmi_sda */
|
||
|
>;
|
||
|
};
|
||
|
|
||
|
tpd12s015_pins: pinmux_tpd12s015_pins {
|
||
|
pinctrl-single,pins = <
|
||
|
OMAP4_IOPAD(0x062, PIN_OUTPUT | MUX_MODE3) /* gpmc_a17.gpio_41 */
|
||
|
OMAP4_IOPAD(0x088, PIN_OUTPUT | MUX_MODE3) /* gpmc_nbe1.gpio_60 */
|
||
|
OMAP4_IOPAD(0x098, PIN_INPUT_PULLDOWN | MUX_MODE3) /* hdmi_hpd.gpio_63 */
|
||
|
>;
|
||
|
};
|
||
|
|
||
|
hsusbb1_pins: pinmux_hsusbb1_pins {
|
||
|
pinctrl-single,pins = <
|
||
|
OMAP4_IOPAD(0x0c2, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_clk.usbb1_ulpiphy_clk */
|
||
|
OMAP4_IOPAD(0x0c4, PIN_OUTPUT | MUX_MODE4) /* usbb1_ulpitll_stp.usbb1_ulpiphy_stp */
|
||
|
OMAP4_IOPAD(0x0c6, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dir.usbb1_ulpiphy_dir */
|
||
|
OMAP4_IOPAD(0x0c8, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_nxt.usbb1_ulpiphy_nxt */
|
||
|
OMAP4_IOPAD(0x0ca, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat0.usbb1_ulpiphy_dat0 */
|
||
|
OMAP4_IOPAD(0x0cc, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat1.usbb1_ulpiphy_dat1 */
|
||
|
OMAP4_IOPAD(0x0ce, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat2.usbb1_ulpiphy_dat2 */
|
||
|
OMAP4_IOPAD(0x0d0, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat3.usbb1_ulpiphy_dat3 */
|
||
|
OMAP4_IOPAD(0x0d2, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat4.usbb1_ulpiphy_dat4 */
|
||
|
OMAP4_IOPAD(0x0d4, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat5.usbb1_ulpiphy_dat5 */
|
||
|
OMAP4_IOPAD(0x0d6, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat6.usbb1_ulpiphy_dat6 */
|
||
|
OMAP4_IOPAD(0x0d8, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat7.usbb1_ulpiphy_dat7 */
|
||
|
>;
|
||
|
};
|
||
|
|
||
|
i2c1_pins: pinmux_i2c1_pins {
|
||
|
pinctrl-single,pins = <
|
||
|
OMAP4_IOPAD(0x122, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_scl */
|
||
|
OMAP4_IOPAD(0x124, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_sda */
|
||
|
>;
|
||
|
};
|
||
|
|
||
|
i2c2_pins: pinmux_i2c2_pins {
|
||
|
pinctrl-single,pins = <
|
||
|
OMAP4_IOPAD(0x126, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c2_scl */
|
||
|
OMAP4_IOPAD(0x128, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c2_sda */
|
||
|
>;
|
||
|
};
|
||
|
|
||
|
i2c3_pins: pinmux_i2c3_pins {
|
||
|
pinctrl-single,pins = <
|
||
|
OMAP4_IOPAD(0x12a, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_scl */
|
||
|
OMAP4_IOPAD(0x12c, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_sda */
|
||
|
>;
|
||
|
};
|
||
|
|
||
|
i2c4_pins: pinmux_i2c4_pins {
|
||
|
pinctrl-single,pins = <
|
||
|
OMAP4_IOPAD(0x12e, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c4_scl */
|
||
|
OMAP4_IOPAD(0x130, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c4_sda */
|
||
|
>;
|
||
|
};
|
||
|
|
||
|
/*
|
||
|
* wl12xx GPIO outputs for WLAN_EN, BT_EN, FM_EN, BT_WAKEUP
|
||
|
* REVISIT: Are the pull-ups needed for GPIO 48 and 49?
|
||
|
*/
|
||
|
wl12xx_gpio: pinmux_wl12xx_gpio {
|
||
|
pinctrl-single,pins = <
|
||
|
OMAP4_IOPAD(0x066, PIN_OUTPUT | MUX_MODE3) /* gpmc_a19.gpio_43 */
|
||
|
OMAP4_IOPAD(0x06c, PIN_OUTPUT | MUX_MODE3) /* gpmc_a22.gpio_46 */
|
||
|
OMAP4_IOPAD(0x070, PIN_OUTPUT_PULLUP | MUX_MODE3) /* gpmc_a24.gpio_48 */
|
||
|
OMAP4_IOPAD(0x072, PIN_OUTPUT_PULLUP | MUX_MODE3) /* gpmc_a25.gpio_49 */
|
||
|
>;
|
||
|
};
|
||
|
|
||
|
/* wl12xx GPIO inputs and SDIO pins */
|
||
|
wl12xx_pins: pinmux_wl12xx_pins {
|
||
|
pinctrl-single,pins = <
|
||
|
OMAP4_IOPAD(0x078, PIN_INPUT | MUX_MODE3) /* gpmc_ncs2.gpio_52 */
|
||
|
OMAP4_IOPAD(0x07a, PIN_INPUT | MUX_MODE3) /* gpmc_ncs3.gpio_53 */
|
||
|
OMAP4_IOPAD(0x148, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_clk.sdmmc5_clk */
|
||
|
OMAP4_IOPAD(0x14a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_cmd.sdmmc5_cmd */
|
||
|
OMAP4_IOPAD(0x14c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat0.sdmmc5_dat0 */
|
||
|
OMAP4_IOPAD(0x14e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat1.sdmmc5_dat1 */
|
||
|
OMAP4_IOPAD(0x150, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat2.sdmmc5_dat2 */
|
||
|
OMAP4_IOPAD(0x152, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat3.sdmmc5_dat3 */
|
||
|
>;
|
||
|
};
|
||
|
|
||
|
button_pins: pinmux_button_pins {
|
||
|
pinctrl-single,pins = <
|
||
|
OMAP4_IOPAD(0x114, PIN_INPUT_PULLUP | MUX_MODE3) /* gpio_121 */
|
||
|
>;
|
||
|
};
|
||
|
};
|
||
|
|
||
|
&omap4_pmx_wkup {
|
||
|
led_wkgpio_pins: pinmux_leds_wkpins {
|
||
|
pinctrl-single,pins = <
|
||
|
OMAP4_IOPAD(0x05a, PIN_OUTPUT | MUX_MODE3) /* gpio_wk7 */
|
||
|
OMAP4_IOPAD(0x05c, PIN_OUTPUT | MUX_MODE3) /* gpio_wk8 */
|
||
|
>;
|
||
|
};
|
||
|
};
|
||
|
|
||
|
&i2c1 {
|
||
|
pinctrl-names = "default";
|
||
|
pinctrl-0 = <&i2c1_pins>;
|
||
|
|
||
|
clock-frequency = <400000>;
|
||
|
|
||
|
twl: twl@48 {
|
||
|
reg = <0x48>;
|
||
|
/* IRQ# = 7 */
|
||
|
interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_1N cascaded to gic */
|
||
|
};
|
||
|
|
||
|
twl6040: twl@4b {
|
||
|
compatible = "ti,twl6040";
|
||
|
#clock-cells = <0>;
|
||
|
reg = <0x4b>;
|
||
|
|
||
|
pinctrl-names = "default";
|
||
|
pinctrl-0 = <&twl6040_pins>;
|
||
|
|
||
|
/* IRQ# = 119 */
|
||
|
interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_2N cascaded to gic */
|
||
|
ti,audpwron-gpio = <&gpio4 31 GPIO_ACTIVE_HIGH>; /* gpio line 127 */
|
||
|
|
||
|
vio-supply = <&v1v8>;
|
||
|
v2v1-supply = <&v2v1>;
|
||
|
enable-active-high;
|
||
|
};
|
||
|
};
|
||
|
|
||
|
#include "twl6030.dtsi"
|
||
|
#include "twl6030_omap4.dtsi"
|
||
|
|
||
|
&i2c2 {
|
||
|
pinctrl-names = "default";
|
||
|
pinctrl-0 = <&i2c2_pins>;
|
||
|
|
||
|
clock-frequency = <400000>;
|
||
|
};
|
||
|
|
||
|
&i2c3 {
|
||
|
pinctrl-names = "default";
|
||
|
pinctrl-0 = <&i2c3_pins>;
|
||
|
|
||
|
clock-frequency = <100000>;
|
||
|
|
||
|
/*
|
||
|
* Display monitor features are burnt in their EEPROM as EDID data.
|
||
|
* The EEPROM is connected as I2C slave device.
|
||
|
*/
|
||
|
eeprom@50 {
|
||
|
compatible = "ti,eeprom";
|
||
|
reg = <0x50>;
|
||
|
};
|
||
|
};
|
||
|
|
||
|
&i2c4 {
|
||
|
pinctrl-names = "default";
|
||
|
pinctrl-0 = <&i2c4_pins>;
|
||
|
|
||
|
clock-frequency = <400000>;
|
||
|
};
|
||
|
|
||
|
&mmc1 {
|
||
|
vmmc-supply = <&vmmc>;
|
||
|
bus-width = <8>;
|
||
|
};
|
||
|
|
||
|
&mmc2 {
|
||
|
status = "disabled";
|
||
|
};
|
||
|
|
||
|
&mmc3 {
|
||
|
status = "disabled";
|
||
|
};
|
||
|
|
||
|
&mmc4 {
|
||
|
status = "disabled";
|
||
|
};
|
||
|
|
||
|
&mmc5 {
|
||
|
pinctrl-names = "default";
|
||
|
pinctrl-0 = <&wl12xx_pins>;
|
||
|
vmmc-supply = <&wl12xx_vmmc>;
|
||
|
interrupts-extended = <&wakeupgen GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH
|
||
|
&omap4_pmx_core 0x10e>;
|
||
|
non-removable;
|
||
|
bus-width = <4>;
|
||
|
cap-power-off-card;
|
||
|
|
||
|
#address-cells = <1>;
|
||
|
#size-cells = <0>;
|
||
|
wlcore: wlcore@2 {
|
||
|
compatible = "ti,wl1271";
|
||
|
reg = <2>;
|
||
|
/* gpio_53 with gpmc_ncs3 pad as wakeup */
|
||
|
interrupts-extended = <&gpio2 21 IRQ_TYPE_LEVEL_HIGH>,
|
||
|
<&omap4_pmx_core 0x3a>;
|
||
|
interrupt-names = "irq", "wakeup";
|
||
|
ref-clock-frequency = <38400000>;
|
||
|
};
|
||
|
};
|
||
|
|
||
|
&emif1 {
|
||
|
cs1-used;
|
||
|
device-handle = <&elpida_ECB240ABACN>;
|
||
|
};
|
||
|
|
||
|
&emif2 {
|
||
|
cs1-used;
|
||
|
device-handle = <&elpida_ECB240ABACN>;
|
||
|
};
|
||
|
|
||
|
&mcbsp1 {
|
||
|
pinctrl-names = "default";
|
||
|
pinctrl-0 = <&mcbsp1_pins>;
|
||
|
status = "okay";
|
||
|
};
|
||
|
|
||
|
&twl_usb_comparator {
|
||
|
usb-supply = <&vusb>;
|
||
|
};
|
||
|
|
||
|
&uart2 {
|
||
|
interrupts-extended = <&wakeupgen GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH
|
||
|
&omap4_pmx_core OMAP4_UART2_RX>;
|
||
|
};
|
||
|
|
||
|
&uart3 {
|
||
|
interrupts-extended = <&wakeupgen GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH
|
||
|
&omap4_pmx_core OMAP4_UART3_RX>;
|
||
|
};
|
||
|
|
||
|
&uart4 {
|
||
|
interrupts-extended = <&wakeupgen GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH
|
||
|
&omap4_pmx_core OMAP4_UART4_RX>;
|
||
|
};
|
||
|
|
||
|
&usb_otg_hs {
|
||
|
interface-type = <1>;
|
||
|
mode = <3>;
|
||
|
power = <50>;
|
||
|
};
|
||
|
|
||
|
&usbhshost {
|
||
|
port1-mode = "ehci-phy";
|
||
|
};
|
||
|
|
||
|
&usbhsehci {
|
||
|
phys = <&hsusb1_phy>;
|
||
|
|
||
|
#address-cells = <1>;
|
||
|
#size-cells = <0>;
|
||
|
|
||
|
hub@1 {
|
||
|
compatible = "usb424,9514";
|
||
|
reg = <1>;
|
||
|
#address-cells = <1>;
|
||
|
#size-cells = <0>;
|
||
|
|
||
|
ethernet: usbether@1 {
|
||
|
compatible = "usb424,ec00";
|
||
|
reg = <1>;
|
||
|
};
|
||
|
};
|
||
|
};
|
||
|
|
||
|
&dss {
|
||
|
status = "ok";
|
||
|
|
||
|
port {
|
||
|
dpi_out: endpoint {
|
||
|
remote-endpoint = <&tfp410_in>;
|
||
|
data-lines = <24>;
|
||
|
};
|
||
|
};
|
||
|
};
|
||
|
|
||
|
&dsi2 {
|
||
|
status = "ok";
|
||
|
vdd-supply = <&vcxio>;
|
||
|
};
|
||
|
|
||
|
&hdmi {
|
||
|
status = "ok";
|
||
|
vdda-supply = <&vdac>;
|
||
|
|
||
|
port {
|
||
|
hdmi_out: endpoint {
|
||
|
remote-endpoint = <&tpd12s015_in>;
|
||
|
};
|
||
|
};
|
||
|
};
|