Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-11-18 10:48:51 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/configs/rpi_arm64_defconfig

61 lines
1.5 KiB
Text
Raw Normal View History

ARM: defconfig: add unified config for RPi3 and RPi4 Provide a defconfig which allows us to boot Raspberrry Pi 4 and Raspberry Pi 3 Model B/B+ Instead of using the embedded DTB as done in RPi3 we use the devicetree provided by the firmware. Signed-off-by: Matthias Brugger <mbrugger@suse.com>
2019-11-06 14:41:03 +00:00
CONFIG_ARM=y
CONFIG_ARCH_BCM283X=y
CONFIG_SYS_TEXT_BASE=0x00080000
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-01 12:19:22 +00:00
CONFIG_TARGET_RPI_ARM64=y
configs: rpi_arm64: sync env size with rpi_{3,4}_defconfig Use the same environment size as the configs dedicated for rpi3 and rpi4. This allows to switch between the builds and not to loose the settings stored on the SD card. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Matthias Brugger <mbrugger@suse.com>
2020-05-05 10:09:02 +00:00
CONFIG_ENV_SIZE=0x4000
arm: rpi: Sync rpi dts files from Linux Sync these files, obtained from Linux v5.15. This adds a devicetree file for rpi_4 which was not there before. Testing shows no change so far as I can see: - boots to U-Boot prompt on rpi0, rpi2 - boots to distro on rpi3 - boots to distro on rpi4 I am assuming that syncing with Linux is safe, but the maintainer should know for sure. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-12-17 03:59:13 +00:00
CONFIG_DEFAULT_DEVICE_TREE="bcm2711-rpi-4-b"
Convert CONFIG_SYS_LOAD_ADDR to Kconfig Now that we have consistent usage, migrate this symbol to Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Rick Chen <rick@andestech.com>
2021-08-23 14:25:31 +00:00
CONFIG_SYS_LOAD_ADDR=0x1000000
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-08 17:36:51 +00:00
CONFIG_DISTRO_DEFAULTS=y
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-05-25 16:16:03 +00:00
CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x7fffe30
ARM: defconfig: add unified config for RPi3 and RPi4 Provide a defconfig which allows us to boot Raspberrry Pi 4 and Raspberry Pi 3 Model B/B+ Instead of using the embedded DTB as done in RPi3 we use the devicetree provided by the firmware. Signed-off-by: Matthias Brugger <mbrugger@suse.com>
2019-11-06 14:41:03 +00:00
CONFIG_OF_BOARD_SETUP=y
CONFIG_USE_PREBOOT=y
configs: Enable support for the XHCI controller on RPI4 board (ARM 64-bit) This requires enabling BRCMSTB PCIe and XHCI_PCI drivers as well as PCI and USB commands. To get it working one has to call the following commands: "pci enum; usb start;", thus such commands have been added to the default "preboot" environment variable. One has to update their environment if it is already configured to get this feature working out of the box. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Matthias Brugger <mbrugger@suse.com>
2020-05-25 11:39:59 +00:00
CONFIG_PREBOOT="pci enum; usb start;"
ARM: defconfig: add unified config for RPi3 and RPi4 Provide a defconfig which allows us to boot Raspberrry Pi 4 and Raspberry Pi 3 Model B/B+ Instead of using the embedded DTB as done in RPi3 we use the devicetree provided by the firmware. Signed-off-by: Matthias Brugger <mbrugger@suse.com>
2019-11-06 14:41:03 +00:00
# CONFIG_DISPLAY_CPUINFO is not set
# CONFIG_DISPLAY_BOARDINFO is not set
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2020-10-09 16:22:06 +00:00
CONFIG_MISC_INIT_R=y
Convert CONFIG_LCD_DT_SIMPLEFB to Kconfig This converts the following to Kconfig: CONFIG_LCD_DT_SIMPLEFB This patch also renames this config to CONFIG_FDT_SIMPLEFB as the code in common/lcd_simplefb.c support CONFIG_LCD and CONFIG_VIDEO. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Matthias Brugger <mbrugger@suse.com>
2021-11-15 15:32:17 +00:00
CONFIG_FDT_SIMPLEFB=y
ARM: defconfig: add unified config for RPi3 and RPi4 Provide a defconfig which allows us to boot Raspberrry Pi 4 and Raspberry Pi 3 Model B/B+ Instead of using the embedded DTB as done in RPi3 we use the devicetree provided by the firmware. Signed-off-by: Matthias Brugger <mbrugger@suse.com>
2019-11-06 14:41:03 +00:00
CONFIG_SYS_PROMPT="U-Boot> "
Convert CONFIG_SYS_PBSIZE to Kconfig This converts the following to Kconfig: CONFIG_SYS_PBSIZE Signed-off-by: Tom Rini <trini@konsulko.com>
2022-05-11 21:38:09 +00:00
CONFIG_SYS_PBSIZE=1049
ARM: defconfig: add unified config for RPi3 and RPi4 Provide a defconfig which allows us to boot Raspberrry Pi 4 and Raspberry Pi 3 Model B/B+ Instead of using the embedded DTB as done in RPi3 we use the devicetree provided by the firmware. Signed-off-by: Matthias Brugger <mbrugger@suse.com>
2019-11-06 14:41:03 +00:00
CONFIG_CMD_GPIO=y
CONFIG_CMD_MMC=y
configs: Enable support for the XHCI controller on RPI4 board (ARM 64-bit) This requires enabling BRCMSTB PCIe and XHCI_PCI drivers as well as PCI and USB commands. To get it working one has to call the following commands: "pci enum; usb start;", thus such commands have been added to the default "preboot" environment variable. One has to update their environment if it is already configured to get this feature working out of the box. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Matthias Brugger <mbrugger@suse.com>
2020-05-25 11:39:59 +00:00
CONFIG_CMD_PCI=y
ARM: defconfig: add unified config for RPi3 and RPi4 Provide a defconfig which allows us to boot Raspberrry Pi 4 and Raspberry Pi 3 Model B/B+ Instead of using the embedded DTB as done in RPi3 we use the devicetree provided by the firmware. Signed-off-by: Matthias Brugger <mbrugger@suse.com>
2019-11-06 14:41:03 +00:00
CONFIG_CMD_USB=y
CONFIG_CMD_FS_UUID=y
CONFIG_ENV_FAT_DEVICE_AND_PART="0:1"
CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
net: convert TFTP_TSIZE to proper Kconfig option TFTP transfer size can be used to re-size the TFTP progress bar on single line based on the server reported file size. The support for this has been around from 2019, but it was never converted to proper Kconfig. While adding this new Kconfig, enable it by default for OMAP2+ and K3 devices also. Signed-off-by: Tero Kristo <kristo@kernel.org>
2021-05-12 08:03:04 +00:00
CONFIG_TFTP_TSIZE=y
configs: rpi4: Enable DM_DMA across all RPi4 configurations The DM_DMA option is needed in order to translate physical address into bus addresses on a per-device basis. Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Peter Robinson <pbrobinson@gmail.com> Signed-off-by: Matthias Brugger <mbrugger@suse.com>
2021-01-12 12:55:30 +00:00
CONFIG_DM_DMA=y
Convert CONFIG_BCM2835_GPIO to Kconfig This converts the following to Kconfig: CONFIG_BCM2835_GPIO Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-22 01:33:30 +00:00
CONFIG_BCM2835_GPIO=y
ARM: defconfig: add unified config for RPi3 and RPi4 Provide a defconfig which allows us to boot Raspberrry Pi 4 and Raspberry Pi 3 Model B/B+ Instead of using the embedded DTB as done in RPi3 we use the devicetree provided by the firmware. Signed-off-by: Matthias Brugger <mbrugger@suse.com>
2019-11-06 14:41:03 +00:00
CONFIG_MMC_SDHCI=y
configs: rpi_arm64: enable SDHCI SDMA support RPi4 supports SDMA on it's SDHCI controller. Enable to option for the combine RPi3/4 config. Signed-off-by: Matthias Brugger <mbrugger@suse.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Matthias Brugger <mbrugger@suse.com>
2020-05-12 10:02:07 +00:00
CONFIG_MMC_SDHCI_SDMA=y
ARM: defconfig: add unified config for RPi3 and RPi4 Provide a defconfig which allows us to boot Raspberrry Pi 4 and Raspberry Pi 3 Model B/B+ Instead of using the embedded DTB as done in RPi3 we use the devicetree provided by the firmware. Signed-off-by: Matthias Brugger <mbrugger@suse.com>
2019-11-06 14:41:03 +00:00
CONFIG_MMC_SDHCI_BCM2835=y
CONFIG_DM_ETH=y
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2020-02-06 18:42:52 +00:00
CONFIG_BCMGENET=y
configs: Enable support for the XHCI controller on RPI4 board (ARM 64-bit) This requires enabling BRCMSTB PCIe and XHCI_PCI drivers as well as PCI and USB commands. To get it working one has to call the following commands: "pci enum; usb start;", thus such commands have been added to the default "preboot" environment variable. One has to update their environment if it is already configured to get this feature working out of the box. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Matthias Brugger <mbrugger@suse.com>
2020-05-25 11:39:59 +00:00
CONFIG_PCI=y
CONFIG_PCI_BRCMSTB=y
ARM: defconfig: add unified config for RPi3 and RPi4 Provide a defconfig which allows us to boot Raspberrry Pi 4 and Raspberry Pi 3 Model B/B+ Instead of using the embedded DTB as done in RPi3 we use the devicetree provided by the firmware. Signed-off-by: Matthias Brugger <mbrugger@suse.com>
2019-11-06 14:41:03 +00:00
CONFIG_PINCTRL=y
# CONFIG_PINCTRL_GENERIC is not set
configs: Enable support for reset controllers on RPi4 This is required in order to access the reset controller used to initialize the board's xHCI chip. Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Signed-off-by: Matthias Brugger <mbrugger@suse.com>
2020-06-29 16:37:24 +00:00
CONFIG_DM_RESET=y
config: Enable iProc RNG200 driver in RPi4 configs We find the iProc RNG200 in the Raspberry Pi 4. Add it to all it's config so that it can be used. Signed-off-by: Matthias Brugger <mbrugger@suse.com> Tested-by: Peter Robinson <pbrobinson@gmail.com> [mb: drop rpi_4_32b_defconfig] Signed-off-by: Matthias Brugger <mbrugger@suse.com>
2020-12-15 09:49:24 +00:00
CONFIG_DM_RNG=y
CONFIG_RNG_IPROC200=y
ARM: defconfig: add unified config for RPi3 and RPi4 Provide a defconfig which allows us to boot Raspberrry Pi 4 and Raspberry Pi 3 Model B/B+ Instead of using the embedded DTB as done in RPi3 we use the devicetree provided by the firmware. Signed-off-by: Matthias Brugger <mbrugger@suse.com>
2019-11-06 14:41:03 +00:00
# CONFIG_REQUIRE_SERIAL_CONSOLE is not set
configs: rpi: Enable SMBIOS sysinfo driver Enable this driver to allow U-Boot to get SMBIOS table information from a device tree node. Signed-off-by: Matthias Brugger <mbrugger@suse.com> Acked-by: Fabian Vogt <fvogt@suse.com>
2021-04-12 13:38:52 +00:00
CONFIG_SYSINFO=y
CONFIG_SYSINFO_SMBIOS=y
ARM: defconfig: add unified config for RPi3 and RPi4 Provide a defconfig which allows us to boot Raspberrry Pi 4 and Raspberry Pi 3 Model B/B+ Instead of using the embedded DTB as done in RPi3 we use the devicetree provided by the firmware. Signed-off-by: Matthias Brugger <mbrugger@suse.com>
2019-11-06 14:41:03 +00:00
CONFIG_USB=y
configs: Enable support for the XHCI controller on RPI4 board (ARM 64-bit) This requires enabling BRCMSTB PCIe and XHCI_PCI drivers as well as PCI and USB commands. To get it working one has to call the following commands: "pci enum; usb start;", thus such commands have been added to the default "preboot" environment variable. One has to update their environment if it is already configured to get this feature working out of the box. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Matthias Brugger <mbrugger@suse.com>
2020-05-25 11:39:59 +00:00
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_PCI=y
ARM: defconfig: add unified config for RPi3 and RPi4 Provide a defconfig which allows us to boot Raspberrry Pi 4 and Raspberry Pi 3 Model B/B+ Instead of using the embedded DTB as done in RPi3 we use the devicetree provided by the firmware. Signed-off-by: Matthias Brugger <mbrugger@suse.com>
2019-11-06 14:41:03 +00:00
CONFIG_USB_DWC2=y
CONFIG_USB_KEYBOARD=y
CONFIG_USB_HOST_ETHER=y
CONFIG_USB_ETHER_LAN78XX=y
CONFIG_USB_ETHER_SMSC95XX=y
CONFIG_DM_VIDEO=y
video: enable VIDEO_ANSI and all VIDEO_BBP options This partially reverts changes by commit 2cc393f32fd9 ("video: make BPP and ANSI configs optional") since it caused issues with other boards (missing LCD console output on pinebook, x86 platform or sandbox). Enable all disabled options again and opt out of not supported color depth in board defconfigs. Signed-off-by: Anatolij Gustschin <agust@denx.de> Reported-by: Vagrant Cascadian <vagrant@debian.org>
2020-02-04 21:43:06 +00:00
# CONFIG_VIDEO_BPP8 is not set
# CONFIG_VIDEO_BPP16 is not set
ARM: defconfig: add unified config for RPi3 and RPi4 Provide a defconfig which allows us to boot Raspberrry Pi 4 and Raspberry Pi 3 Model B/B+ Instead of using the embedded DTB as done in RPi3 we use the devicetree provided by the firmware. Signed-off-by: Matthias Brugger <mbrugger@suse.com>
2019-11-06 14:41:03 +00:00
CONFIG_SYS_WHITE_ON_BLACK=y
video: Convert CONFIG_VIDEO_BCM2835 to Kconfig This converts the following to Kconfig: CONFIG_VIDEO_BCM2835 This is the final ad-hoc CONFIG_VIDEO_... to convert. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Matthias Brugger <mbrugger@suse.com>
2022-01-23 14:04:14 +00:00
CONFIG_VIDEO_BCM2835=y
ARM: defconfig: add unified config for RPi3 and RPi4 Provide a defconfig which allows us to boot Raspberrry Pi 4 and Raspberry Pi 3 Model B/B+ Instead of using the embedded DTB as done in RPi3 we use the devicetree provided by the firmware. Signed-off-by: Matthias Brugger <mbrugger@suse.com>
2019-11-06 14:41:03 +00:00
CONFIG_CONSOLE_SCROLL_LINES=10
CONFIG_PHYS_TO_BUS=y
CONFIG_OF_LIBFDT_OVERLAY=y
Reference in a new issue Copy permalink