Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-11-17 18:28:55 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/arch/arm/mach-rmobile/lowlevel_init_gen3.S

104 lines
2 KiB
ArmAsm
Raw Normal View History

SPDX: Convert all of our single license tags to Linux Kernel style When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-06 21:58:06 +00:00
/* SPDX-License-Identifier: GPL-2.0+ */
ARM: rmobile: Add support R-Car Generation 3 This adds supporting R-Car Generation 3 (Gen3) as Renesas ARM64 SoC. Signed-off-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2016-03-31 18:51:34 +00:00
/*
* arch/arm/cpu/armv8/rcar_gen3/lowlevel_init.S
* This file is lowlevel initialize routine.
*
* (C) Copyright 2015 Renesas Electronics Corporation
*
* This file is based on the arch/arm/cpu/armv8/start.S
*
* (C) Copyright 2013
* David Feng <fenghua@phytium.com.cn>
*/
#include <asm-offsets.h>
#include <config.h>
#include <linux/linkage.h>
#include <asm/macro.h>
ARM: renesas: Save boot parameters passed in by ATF The ATF can pass additional information via the first four registers, x0...x3. The R-Car Gen3 with mainline ATF, register x1 contains pointer to a device tree with platform information. Save these registers for future use. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2018-10-18 16:38:05 +00:00
.align 8
.globl rcar_atf_boot_args
rcar_atf_boot_args:
.dword 0
.dword 0
.dword 0
.dword 0
ENTRY(save_boot_params)
adr x8, rcar_atf_boot_args
stp x0, x1, [x8], #16
stp x2, x3, [x8], #16
b save_boot_params_ret
ENDPROC(save_boot_params)
arm: mach-rmobile: Mark the default s_init function as weak Mark the default s_init function as weak, so that SoC's can override it if needed, and it will still be discarded if unused. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
2020-09-22 08:09:17 +00:00
.pushsection .text.s_init, "ax"
WEAK(s_init)
ret
ENDPROC(s_init)
.popsection
ARM: rmobile: Add support R-Car Generation 3 This adds supporting R-Car Generation 3 (Gen3) as Renesas ARM64 SoC. Signed-off-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2016-03-31 18:51:34 +00:00
ENTRY(lowlevel_init)
mov x29, lr /* Save LR */
#ifndef CONFIG_ARMV8_MULTIENTRY
/*
* For single-entry systems the lowlevel init is very simple.
*/
ldr x0, =GICD_BASE
bl gic_init_secure
#else /* CONFIG_ARMV8_MULTIENTRY is set */
#if defined(CONFIG_GICV2) || defined(CONFIG_GICV3)
branch_if_slave x0, 1f
ldr x0, =GICD_BASE
bl gic_init_secure
1:
#if defined(CONFIG_GICV3)
ldr x0, =GICR_BASE
bl gic_init_secure_percpu
#elif defined(CONFIG_GICV2)
ldr x0, =GICD_BASE
ldr x1, =GICC_BASE
bl gic_init_secure_percpu
#endif
#endif
armv8: Fix and simplify branch_if_master/branch_if_slave The branch_if_master macro jumps to a label if the CPU is the "master" core, which we define as having all affinity levels set to 0. To check for this condition, we need to mask off some bits from the MPIDR register, then compare the remaining register value against zero. The implementation of this was slighly broken (it preserved the upper RES0 bits), overly complicated and hard to understand, especially since it lacked comments. The same was true for the very similar branch_if_slave macro. Use a much shorter assembly sequence for those checks, use the same masking for both macros (just negate the final branch), and put some comments on them, to make it clear what the code does. This allows to drop the second temporary register for branch_if_master, so we adjust all call sites as well. Also use the opportunity to remove a misleading comment: the macro works fine on SoCs with multiple clusters. Judging by the commit message, the original problem with the Juno SoC stems from the fact that the master CPU *can* be configured to be from cluster 1, so the assumption that the master CPU has all affinity values set to 0 does not hold there. But this is already mentioned above in a comment, so remove the extra comment. Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2022-02-11 11:29:39 +00:00
branch_if_master x0, 2f
ARM: rmobile: Add support R-Car Generation 3 This adds supporting R-Car Generation 3 (Gen3) as Renesas ARM64 SoC. Signed-off-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2016-03-31 18:51:34 +00:00
/*
* Slave should wait for master clearing spin table.
* This sync prevent salves observing incorrect
* value of spin table and jumping to wrong place.
*/
#if defined(CONFIG_GICV2) || defined(CONFIG_GICV3)
#ifdef CONFIG_GICV2
ldr x0, =GICC_BASE
#endif
bl gic_wait_for_interrupt
#endif
/*
* All slaves will enter EL2 and optionally EL1.
*/
armv8: aarch64: Fix the warning about x1-x3 nonzero issue For 64-bit kernel, there is a warning about x1-x3 nonzero in violation of boot protocol. To fix this issue, input argument 4 is added for armv8_switch_to_el2 and armv8_switch_to_el1. The input argument 4 will be set to the right value, such as zero. Signed-off-by: Alison Wang <alison.wang@nxp.com> Reviewed-by: Alexander Graf <agraf@suse.de> Tested-by: Ryan Harkin <ryan.harkin@linaro.org> Tested-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: York Sun <york.sun@nxp.com>
2017-01-17 01:39:17 +00:00
adr x4, lowlevel_in_el2
ldr x5, =ES_TO_AARCH64
ARM: rmobile: Add support R-Car Generation 3 This adds supporting R-Car Generation 3 (Gen3) as Renesas ARM64 SoC. Signed-off-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2016-03-31 18:51:34 +00:00
bl armv8_switch_to_el2
armv8: Support loading 32-bit OS in AArch32 execution state To support loading a 32-bit OS, the execution state will change from AArch64 to AArch32 when jumping to kernel. The architecture information will be got through checking FIT image, then U-Boot will load 32-bit OS or 64-bit OS automatically. Signed-off-by: Ebony Zhu <ebony.zhu@nxp.com> Signed-off-by: Alison Wang <alison.wang@nxp.com> Signed-off-by: Chenhui Zhao <chenhui.zhao@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2016-11-10 02:49:03 +00:00
lowlevel_in_el2:
ARM: rmobile: Add support R-Car Generation 3 This adds supporting R-Car Generation 3 (Gen3) as Renesas ARM64 SoC. Signed-off-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2016-03-31 18:51:34 +00:00
#ifdef CONFIG_ARMV8_SWITCH_TO_EL1
armv8: aarch64: Fix the warning about x1-x3 nonzero issue For 64-bit kernel, there is a warning about x1-x3 nonzero in violation of boot protocol. To fix this issue, input argument 4 is added for armv8_switch_to_el2 and armv8_switch_to_el1. The input argument 4 will be set to the right value, such as zero. Signed-off-by: Alison Wang <alison.wang@nxp.com> Reviewed-by: Alexander Graf <agraf@suse.de> Tested-by: Ryan Harkin <ryan.harkin@linaro.org> Tested-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: York Sun <york.sun@nxp.com>
2017-01-17 01:39:17 +00:00
adr x4, lowlevel_in_el1
ldr x5, =ES_TO_AARCH64
ARM: rmobile: Add support R-Car Generation 3 This adds supporting R-Car Generation 3 (Gen3) as Renesas ARM64 SoC. Signed-off-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2016-03-31 18:51:34 +00:00
bl armv8_switch_to_el1
armv8: Support loading 32-bit OS in AArch32 execution state To support loading a 32-bit OS, the execution state will change from AArch64 to AArch32 when jumping to kernel. The architecture information will be got through checking FIT image, then U-Boot will load 32-bit OS or 64-bit OS automatically. Signed-off-by: Ebony Zhu <ebony.zhu@nxp.com> Signed-off-by: Alison Wang <alison.wang@nxp.com> Signed-off-by: Chenhui Zhao <chenhui.zhao@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2016-11-10 02:49:03 +00:00
lowlevel_in_el1:
#endif
ARM: rmobile: Add support R-Car Generation 3 This adds supporting R-Car Generation 3 (Gen3) as Renesas ARM64 SoC. Signed-off-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2016-03-31 18:51:34 +00:00
#endif /* CONFIG_ARMV8_MULTIENTRY */
bl s_init
2:
mov lr, x29 /* Restore LR */
ret
ENDPROC(lowlevel_init)
Reference in a new issue Copy permalink