u-boot/configs/orangepi_plus_defconfig

CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
CONFIG_MACH_SUN8I_H3=y
CONFIG_DRAM_CLK=672
CONFIG_DRAM_ZQ=3881979
CONFIG_DRAM_ODT_EN=y
CONFIG_MMC0_CD_PIN="PF6"
CONFIG_MMC_SUNXI_SLOT_EXTRA=2
CONFIG_USB1_VBUS_PIN="PG13"
# CONFIG_VIDEO is not set
CONFIG_DEFAULT_DEVICE_TREE="sun8i-h3-orangepi-plus"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL=y
CONFIG_SYS_EXTRA_OPTIONS="SATAPWR=SUNXI_GPG(11)"
CONFIG_HUSH_PARSER=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
CONFIG_SY8106A_POWER=y
CONFIG_USB_EHCI_HCD=y
sunxi: Add support for Orangepi Plus and Orangepi PC boards Add defconfig files for the Orangepi Plus and Orangepi PC. Signed-off-by: Hans de Goede <hdegoede@redhat.com> 2015-11-20 15:19:51 +00:00			`CONFIG_ARM=y`
			`CONFIG_ARCH_SUNXI=y`
			`CONFIG_MACH_SUN8I_H3=y`
			`CONFIG_DRAM_CLK=672`
			`CONFIG_DRAM_ZQ=3881979`
			`CONFIG_DRAM_ODT_EN=y`
sunxi: Enable support for the eMMC found on the orangepi plus This enables support for the eMMC found on the orangepi plus. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk> 2016-03-20 13:19:50 +00:00			`CONFIG_MMC0_CD_PIN="PF6"`
			`CONFIG_MMC_SUNXI_SLOT_EXTRA=2`
configs: Re-sync HUSH options Move all cases of CONFIG_SYS_HUSH_PARSER out of the config.h files. Remove all cases of CONFIG_SYS_PROMPT_HUSH_PS2 as everyone uses the default. Signed-off-by: Tom Rini <trini@konsulko.com> 2016-04-22 01:37:19 +00:00			`CONFIG_USB1_VBUS_PIN="PG13"`
sunxi: Add support for Orangepi Plus and Orangepi PC boards Add defconfig files for the Orangepi Plus and Orangepi PC. Signed-off-by: Hans de Goede <hdegoede@redhat.com> 2015-11-20 15:19:51 +00:00			`# CONFIG_VIDEO is not set`
			`CONFIG_DEFAULT_DEVICE_TREE="sun8i-h3-orangepi-plus"`
			`# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set`
			`CONFIG_SPL=y`
configs: Re-sync HUSH options Move all cases of CONFIG_SYS_HUSH_PARSER out of the config.h files. Remove all cases of CONFIG_SYS_PROMPT_HUSH_PS2 as everyone uses the default. Signed-off-by: Tom Rini <trini@konsulko.com> 2016-04-22 01:37:19 +00:00			`CONFIG_SYS_EXTRA_OPTIONS="SATAPWR=SUNXI_GPG(11)"`
			`CONFIG_HUSH_PARSER=y`
sunxi: Add support for Orangepi Plus and Orangepi PC boards Add defconfig files for the Orangepi Plus and Orangepi PC. Signed-off-by: Hans de Goede <hdegoede@redhat.com> 2015-11-20 15:19:51 +00:00			`# CONFIG_CMD_IMLS is not set`
			`# CONFIG_CMD_FLASH is not set`
			`# CONFIG_CMD_FPGA is not set`
sunxi: power: add support for sy8106a driver SY8106A is a PMIC which is used on the Allwinner H3 Orange Pi Pc and Plus board. The VOUT1_SEL register is implemented to set the default V-CPU voltage to 1200 mV. This driver is required to ensure the SY8106A V-CPU voltage is set to 1200 mV after a software reset. On cold boot the default SY8106A output voltage is selected to be 1200 mV by a pair of resistors on the Orange Pi PC and Plus. Signed-off-by: Jelle van der Waa <jelle@vdwaa.nl> Tested-by: Siarhei Siamashka <siarhei.siamashka@gmail.com> Acked-by: Siarhei Siamashka <siarhei.siamashka@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> 2016-02-23 17:47:19 +00:00			`CONFIG_SY8106A_POWER=y`
sunxi: H3: Add support for the host usb-phys Add support for phy 1-3. Signed-off-by: Jelle van der Waa <jelle@vdwaa.nl> [hdegoede@redhat.com: use setclrbits_le32 instead of read-modify-write] Signed-off-by: Hans de Goede <hdegoede@redhat.com> 2016-02-09 22:59:33 +00:00			`CONFIG_USB_EHCI_HCD=y`