mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-08 14:14:32 +00:00
44 lines
1.7 KiB
Text
44 lines
1.7 KiB
Text
|
1. Setup U-Boot Image for Encrypted Boot
|
||
|
|
----------------------------------------
|
||
|
|
An authenticated U-Boot image is used as starting point for
|
||
|
|
Encrypted Boot. The image is encrypted by i.MX Code Signing
|
||
|
|
Tool (CST). The CST replaces only the image data of
|
||
|
|
u-boot-dtb.imx with the encrypted data. The Initial Vector Table,
|
||
|
|
DCD, and Boot data, remains in plaintext.
|
||
|
|
|
||
|
|
The image data is encrypted with a Encryption Key (DEK).
|
||
|
|
Therefore, this key is needed to decrypt the data during the
|
||
|
|
booting process. The DEK is protected by wrapping it in a Blob,
|
||
|
|
which needs to be appended to the U-Boot image and specified in
|
||
|
|
the CSF file.
|
||
|
|
|
||
|
|
The DEK blob is generated by an authenticated U-Boot image with
|
||
|
|
the dek_blob cmd enabled. The image used for DEK blob generation
|
||
|
|
needs to have the following configurations enabled in Kconfig:
|
||
|
|
|
||
|
|
CONFIG_SECURE_BOOT=y
|
||
|
|
CONFIG_CMD_DEKBLOB=y
|
||
|
|
|
||
|
|
Note: The encrypted boot feature is only supported by HABv4 or
|
||
|
|
greater.
|
||
|
|
|
||
|
|
The dek_blob command then can be used to generate the DEK blob of
|
||
|
|
a DEK previously loaded in memory. The command is used as follows:
|
||
|
|
|
||
|
|
dek_blob <DEK address> <Output Address> <Key Size in Bits>
|
||
|
|
example: dek_blob 0x10800000 0x10801000 192
|
||
|
|
|
||
|
|
The resulting DEK blob then is used to construct the encrypted
|
||
|
|
U-Boot image. Note that the blob needs to be transferred back
|
||
|
|
to the host.Then the following commands are used to construct
|
||
|
|
the final image.
|
||
|
|
|
||
|
|
cat u-boot-dtb.imx csf-u-boot.bin > u-boot-signed.imx
|
||
|
|
objcopy -I binary -O binary --pad-to <blob_dst> --gap-fill=0x00 \
|
||
|
|
u-boot-signed.imx u-boot-signed-pad.bin
|
||
|
|
cat u-boot-signed-pad.imx DEK_blob.bin > u-boot-encrypted.imx
|
||
|
|
|
||
|
|
NOTE: u-boot-signed.bin needs to be padded to the value
|
||
|
|
equivalent to the address in which the DEK blob is specified
|
||
|
|
in the CSF.
|