u-boot/drivers/net/fm/dtsec.c

182 lines
4.6 KiB
C
Raw Normal View History

powerpc/85xx: Add support for FMan ethernet in Independent mode The Frame Manager (FMan) on QorIQ SoCs with DPAA (datapath acceleration architecture) is the ethernet contoller block. Normally it is utilized via Queue Manager (Qman) and Buffer Manager (Bman). However for boot usage the FMan supports a mode similar to QE or CPM ethernet collers called Independent mode. Additionally the FMan block supports multiple 1g and 10g interfaces as a single entity in the system rather than each controller being managed uniquely. This means we have to initialize all of Fman regardless of the number of interfaces we utilize. Different SoCs support different combinations of the number of FMan as well as the number of 1g & 10g interfaces support per Fman. We add support for the following SoCs: * P1023 - 1 Fman, 2x1g * P4080 - 2 Fman, each Fman has 4x1g and 1x10g * P204x/P3041/P5020 - 1 Fman, 5x1g, 1x10g Signed-off-by: Dave Liu <daveliu@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Dai Haruki <dai.haruki@freescale.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Ioana Radulescu <ruxandra.radulescu@freescale.com> Signed-off-by: Lei Xu <B33228@freescale.com> Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Shaohui Xie <b21989@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-04-13 13:37:44 +00:00
/*
* Copyright 2009-2011 Freescale Semiconductor, Inc.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <asm/types.h>
#include <asm/io.h>
#include <asm/fsl_enet.h>
#include <asm/fsl_dtsec.h>
#include <fsl_mdio.h>
#include <phy.h>
#include "fm.h"
#define RCTRL_INIT (RCTRL_GRS | RCTRL_UPROM)
#define TCTRL_INIT TCTRL_GTS
#define MACCFG1_INIT MACCFG1_SOFT_RST
#define MACCFG2_INIT (MACCFG2_PRE_LEN(0x7) | MACCFG2_LEN_CHECK | \
MACCFG2_PAD_CRC | MACCFG2_FULL_DUPLEX | \
MACCFG2_IF_MODE_NIBBLE)
/* MAXFRM - maximum frame length register */
#define MAXFRM_MASK 0x00003fff
static void dtsec_init_mac(struct fsl_enet_mac *mac)
{
struct dtsec *regs = mac->base;
/* soft reset */
out_be32(&regs->maccfg1, MACCFG1_SOFT_RST);
udelay(1000);
/* clear soft reset, Rx/Tx MAC disable */
out_be32(&regs->maccfg1, 0);
/* graceful stop rx */
out_be32(&regs->rctrl, RCTRL_INIT);
udelay(1000);
/* graceful stop tx */
out_be32(&regs->tctrl, TCTRL_INIT);
udelay(1000);
/* disable all interrupts */
out_be32(&regs->imask, IMASK_MASK_ALL);
/* clear all events */
out_be32(&regs->ievent, IEVENT_CLEAR_ALL);
/* set the max Rx length */
out_be32(&regs->maxfrm, mac->max_rx_len & MAXFRM_MASK);
/* set the ecntrl to reset value */
out_be32(&regs->ecntrl, ECNTRL_DEFAULT);
/*
* Rx length check, no strip CRC for Rx, pad and append CRC for Tx,
* full duplex
*/
out_be32(&regs->maccfg2, MACCFG2_INIT);
}
static void dtsec_enable_mac(struct fsl_enet_mac *mac)
{
struct dtsec *regs = mac->base;
/* enable Rx/Tx MAC */
setbits_be32(&regs->maccfg1, MACCFG1_RXTX_EN);
/* clear the graceful Rx stop */
clrbits_be32(&regs->rctrl, RCTRL_GRS);
/* clear the graceful Tx stop */
clrbits_be32(&regs->tctrl, TCTRL_GTS);
}
static void dtsec_disable_mac(struct fsl_enet_mac *mac)
{
struct dtsec *regs = mac->base;
/* graceful Rx stop */
setbits_be32(&regs->rctrl, RCTRL_GRS);
/* graceful Tx stop */
setbits_be32(&regs->tctrl, TCTRL_GTS);
/* disable Rx/Tx MAC */
clrbits_be32(&regs->maccfg1, MACCFG1_RXTX_EN);
}
static void dtsec_set_mac_addr(struct fsl_enet_mac *mac, u8 *mac_addr)
{
struct dtsec *regs = mac->base;
u32 mac_addr1, mac_addr2;
/*
* if a station address of 0x12345678ABCD, perform a write to
* MACSTNADDR1 of 0xCDAB7856, MACSTNADDR2 of 0x34120000
*/
mac_addr1 = (mac_addr[5] << 24) | (mac_addr[4] << 16) | \
(mac_addr[3] << 8) | (mac_addr[2]);
out_be32(&regs->macstnaddr1, mac_addr1);
mac_addr2 = ((mac_addr[1] << 24) | (mac_addr[0] << 16)) & 0xffff0000;
out_be32(&regs->macstnaddr2, mac_addr2);
}
static void dtsec_set_interface_mode(struct fsl_enet_mac *mac,
phy_interface_t type, int speed)
{
struct dtsec *regs = mac->base;
u32 ecntrl, maccfg2;
/* clear all bits relative with interface mode */
ecntrl = in_be32(&regs->ecntrl);
ecntrl &= ~(ECNTRL_TBIM | ECNTRL_GMIIM | ECNTRL_RPM |
ECNTRL_R100M | ECNTRL_SGMIIM);
maccfg2 = in_be32(&regs->maccfg2);
maccfg2 &= ~MACCFG2_IF_MODE_MASK;
if (speed == SPEED_1000)
maccfg2 |= MACCFG2_IF_MODE_BYTE;
else
maccfg2 |= MACCFG2_IF_MODE_NIBBLE;
/* set interface mode */
switch (type) {
case PHY_INTERFACE_MODE_GMII:
ecntrl |= ECNTRL_GMIIM;
break;
case PHY_INTERFACE_MODE_RGMII:
ecntrl |= (ECNTRL_GMIIM | ECNTRL_RPM);
if (speed == SPEED_100)
ecntrl |= ECNTRL_R100M;
break;
case PHY_INTERFACE_MODE_RMII:
if (speed == SPEED_100)
ecntrl |= ECNTRL_R100M;
break;
case PHY_INTERFACE_MODE_SGMII:
ecntrl |= (ECNTRL_SGMIIM | ECNTRL_TBIM);
if (speed == SPEED_100)
ecntrl |= ECNTRL_R100M;
break;
default:
break;
}
out_be32(&regs->ecntrl, ecntrl);
out_be32(&regs->maccfg2, maccfg2);
}
void init_dtsec(struct fsl_enet_mac *mac, void *base,
void *phyregs, int max_rx_len)
{
mac->base = base;
mac->phyregs = phyregs;
powerpc/85xx: Add support for FMan ethernet in Independent mode The Frame Manager (FMan) on QorIQ SoCs with DPAA (datapath acceleration architecture) is the ethernet contoller block. Normally it is utilized via Queue Manager (Qman) and Buffer Manager (Bman). However for boot usage the FMan supports a mode similar to QE or CPM ethernet collers called Independent mode. Additionally the FMan block supports multiple 1g and 10g interfaces as a single entity in the system rather than each controller being managed uniquely. This means we have to initialize all of Fman regardless of the number of interfaces we utilize. Different SoCs support different combinations of the number of FMan as well as the number of 1g & 10g interfaces support per Fman. We add support for the following SoCs: * P1023 - 1 Fman, 2x1g * P4080 - 2 Fman, each Fman has 4x1g and 1x10g * P204x/P3041/P5020 - 1 Fman, 5x1g, 1x10g Signed-off-by: Dave Liu <daveliu@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Dai Haruki <dai.haruki@freescale.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Ioana Radulescu <ruxandra.radulescu@freescale.com> Signed-off-by: Lei Xu <B33228@freescale.com> Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Shaohui Xie <b21989@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-04-13 13:37:44 +00:00
mac->max_rx_len = max_rx_len;
mac->init_mac = dtsec_init_mac;
mac->enable_mac = dtsec_enable_mac;
mac->disable_mac = dtsec_disable_mac;
mac->set_mac_addr = dtsec_set_mac_addr;
mac->set_if_mode = dtsec_set_interface_mode;
}