u-boot/doc/board/st/st.rst

69 lines
1.7 KiB
ReStructuredText
Raw Normal View History

.. SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
.. sectionauthor:: Patrick Delaunay <patrick.delaunay@st.com>
U-Boot device tree bindings
----------------------------
The U-Boot specific bindings are defined in the U-Boot directory:
doc/device-tree-bindings
* clock
- :download:`clock/st,stm32mp1.txt <../../device-tree-bindings/clock/st,stm32mp1.txt>`
* ram
- :download:`memory-controllers/st,stm32mp1-ddr.txt <../../device-tree-bindings/memory-controllers/st,stm32mp1-ddr.txt>`
All the other device tree bindings used in U-Boot are specified in Linux
kernel. Please refer dt bindings from below specified paths in the Linux
kernel binding directory = Documentation/devicetree/bindings/
* acd
- iio/adc/st,stm32-adc.yaml
* clock
- clock/st,stm32-rcc.txt
- clock/st,stm32h7-rcc.txt
- clock/st,stm32mp1-rcc.yaml
* display
- display/st,stm32-dsi.yaml
- display/st,stm32-ltdc.yaml
* gpio
- pinctrl/st,stm32-pinctrl.yaml
* hwlock
- hwlock/st,stm32-hwspinlock.yaml
* i2c
- i2c/st,stm32-i2c.yaml
* mailbox
- mailbox/st,stm32-ipcc.yaml
* mmc
- mmc/arm,pl18x.yaml
* nand
- mtd/st,stm32-fmc2-nand.yaml
- memory-controllers/st,stm32-fmc2-ebi.yaml
* net
- net/stm32-dwmac.yaml
* nvmem
- nvmem/st,stm32-romem.yaml
* remoteproc
- remoteproc/st,stm32-rproc.yaml
* regulator
- regulator/st,stm32mp1-pwr-reg.yaml
- regulator/st,stm32-vrefbuf.yaml
* reset
- reset/st,stm32-rcc.txt
- reset/st,stm32mp1-rcc.txt
* rng
- rng/st,stm32-rng.yaml
* rtc
- rtc/st,stm32-rtc.yaml
* serial
- serial/st,stm32-uart.yaml
* spi
- spi/st,stm32-spi.yaml
- spi/st,stm32-qspi.yaml
* syscon
- arm/stm32/st,stm32-syscon.yaml
* usb
- phy/phy-stm32-usbphyc.yaml
- usb/dwc2.yaml
* watchdog
- watchdog/st,stm32-iwdg.yaml