u-boot/configs/verdin-imx8mp_defconfig

136 lines
3.3 KiB
Text
Raw Normal View History

board: toradex: add verdin imx8m plus support This adds initial support for the Toradex Verdin iMX8M Plus Quad 4GB WB IT V1.0B module. They are strapped to boot from eFuses which are factory fused to properly boot from their on-module eMMC. U-Boot supports booting from the on-module eMMC only, SDP support is disabled for now due to missing i.MX 8M Plus USB support. Functionality wise the following is known to be working: - eMMC, 8-bit and 4-bit MMC/SD card slots - Ethernet both on-module eQoS and FEC (requires PHY on carrier board) - GPIOs - I2C Boot sequence is: SPL ---> ATF (TF-A) ---> U-boot proper ATF, U-boot proper and u-boot.dtb images are packed into a FIT image, loaded by SPL. Boot: U-Boot SPL 2022.04-rc1-00164-g21a0312611-dirty (Feb 07 2022 - 11:34:04 +0100) Quad die, dual rank failed, attempting dual die, single rank configuration. Normal Boot WDT: Started watchdog@30280000 with servicing (60s timeout) Trying to boot from BOOTROM Find img info 0x&48025a00, size 872 Need continue download 1024 Download 779264, Total size 780424 NOTICE: BL31: v2.2(release):rel_imx_5.4.70_2.3.2_rc1-5-g835a8f67b NOTICE: BL31: Built : 16:52:37, Aug 26 2021 U-Boot 2022.04-rc1-00164-g21a0312611-dirty (Feb 07 2022 - 11:34:04 +0100) CPU: Freescale i.MX8MP[8] rev1.1 at 1200 MHz Reset cause: POR DRAM: 8 GiB Core: 78 devices, 18 uclasses, devicetree: separate WDT: Started watchdog@30280000 with servicing (60s timeout) MMC: FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial Out: serial Err: serial Model: Toradex Verdin iMX8M Plus Quad 4GB Wi-Fi / BT IT V1.0B, Serial# 06817281 Carrier: Toradex Verdin Development Board V1.1A, Serial# 10807609 Setting variant to wifi Net: Hard-coding pdata->enetaddr eth1: ethernet@30be0000, eth0: ethernet@30bf0000 [PRIME] Hit any key to stop autoboot: 0 Verdin iMX8MP # Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2022-02-07 10:54:13 +00:00
CONFIG_ARM=y
CONFIG_ARCH_IMX8M=y
CONFIG_SYS_TEXT_BASE=0x40200000
CONFIG_SPL_GPIO=y
CONFIG_SPL_LIBCOMMON_SUPPORT=y
CONFIG_SPL_LIBGENERIC_SUPPORT=y
CONFIG_NR_DRAM_BANKS=2
CONFIG_ENV_SIZE=0x2000
CONFIG_ENV_OFFSET=0xFFFFDE00
CONFIG_SYS_I2C_MXC_I2C1=y
CONFIG_SYS_I2C_MXC_I2C2=y
CONFIG_SYS_I2C_MXC_I2C3=y
CONFIG_SYS_I2C_MXC_I2C4=y
CONFIG_DM_GPIO=y
CONFIG_DEFAULT_DEVICE_TREE="imx8mp-verdin"
CONFIG_SPL_TEXT_BASE=0x920000
CONFIG_TARGET_VERDIN_IMX8MP=y
CONFIG_SPL_MMC=y
CONFIG_SPL_SERIAL=y
CONFIG_SPL_DRIVERS_MISC=y
CONFIG_SPL=y
CONFIG_IMX_BOOTAUX=y
CONFIG_SPL_IMX_ROMAPI_LOADADDR=0x48000000
CONFIG_SYS_LOAD_ADDR=0x43500000
CONFIG_SYS_MEMTEST_START=0x40000000
CONFIG_SYS_MEMTEST_END=0x80000000
board: toradex: add verdin imx8m plus support This adds initial support for the Toradex Verdin iMX8M Plus Quad 4GB WB IT V1.0B module. They are strapped to boot from eFuses which are factory fused to properly boot from their on-module eMMC. U-Boot supports booting from the on-module eMMC only, SDP support is disabled for now due to missing i.MX 8M Plus USB support. Functionality wise the following is known to be working: - eMMC, 8-bit and 4-bit MMC/SD card slots - Ethernet both on-module eQoS and FEC (requires PHY on carrier board) - GPIOs - I2C Boot sequence is: SPL ---> ATF (TF-A) ---> U-boot proper ATF, U-boot proper and u-boot.dtb images are packed into a FIT image, loaded by SPL. Boot: U-Boot SPL 2022.04-rc1-00164-g21a0312611-dirty (Feb 07 2022 - 11:34:04 +0100) Quad die, dual rank failed, attempting dual die, single rank configuration. Normal Boot WDT: Started watchdog@30280000 with servicing (60s timeout) Trying to boot from BOOTROM Find img info 0x&48025a00, size 872 Need continue download 1024 Download 779264, Total size 780424 NOTICE: BL31: v2.2(release):rel_imx_5.4.70_2.3.2_rc1-5-g835a8f67b NOTICE: BL31: Built : 16:52:37, Aug 26 2021 U-Boot 2022.04-rc1-00164-g21a0312611-dirty (Feb 07 2022 - 11:34:04 +0100) CPU: Freescale i.MX8MP[8] rev1.1 at 1200 MHz Reset cause: POR DRAM: 8 GiB Core: 78 devices, 18 uclasses, devicetree: separate WDT: Started watchdog@30280000 with servicing (60s timeout) MMC: FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial Out: serial Err: serial Model: Toradex Verdin iMX8M Plus Quad 4GB Wi-Fi / BT IT V1.0B, Serial# 06817281 Carrier: Toradex Verdin Development Board V1.1A, Serial# 10807609 Setting variant to wifi Net: Hard-coding pdata->enetaddr eth1: ethernet@30be0000, eth0: ethernet@30bf0000 [PRIME] Hit any key to stop autoboot: 0 Verdin iMX8MP # Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2022-02-07 10:54:13 +00:00
CONFIG_DISTRO_DEFAULTS=y
CONFIG_REMAKE_ELF=y
board: toradex: add verdin imx8m plus support This adds initial support for the Toradex Verdin iMX8M Plus Quad 4GB WB IT V1.0B module. They are strapped to boot from eFuses which are factory fused to properly boot from their on-module eMMC. U-Boot supports booting from the on-module eMMC only, SDP support is disabled for now due to missing i.MX 8M Plus USB support. Functionality wise the following is known to be working: - eMMC, 8-bit and 4-bit MMC/SD card slots - Ethernet both on-module eQoS and FEC (requires PHY on carrier board) - GPIOs - I2C Boot sequence is: SPL ---> ATF (TF-A) ---> U-boot proper ATF, U-boot proper and u-boot.dtb images are packed into a FIT image, loaded by SPL. Boot: U-Boot SPL 2022.04-rc1-00164-g21a0312611-dirty (Feb 07 2022 - 11:34:04 +0100) Quad die, dual rank failed, attempting dual die, single rank configuration. Normal Boot WDT: Started watchdog@30280000 with servicing (60s timeout) Trying to boot from BOOTROM Find img info 0x&48025a00, size 872 Need continue download 1024 Download 779264, Total size 780424 NOTICE: BL31: v2.2(release):rel_imx_5.4.70_2.3.2_rc1-5-g835a8f67b NOTICE: BL31: Built : 16:52:37, Aug 26 2021 U-Boot 2022.04-rc1-00164-g21a0312611-dirty (Feb 07 2022 - 11:34:04 +0100) CPU: Freescale i.MX8MP[8] rev1.1 at 1200 MHz Reset cause: POR DRAM: 8 GiB Core: 78 devices, 18 uclasses, devicetree: separate WDT: Started watchdog@30280000 with servicing (60s timeout) MMC: FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial Out: serial Err: serial Model: Toradex Verdin iMX8M Plus Quad 4GB Wi-Fi / BT IT V1.0B, Serial# 06817281 Carrier: Toradex Verdin Development Board V1.1A, Serial# 10807609 Setting variant to wifi Net: Hard-coding pdata->enetaddr eth1: ethernet@30be0000, eth0: ethernet@30bf0000 [PRIME] Hit any key to stop autoboot: 0 Verdin iMX8MP # Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2022-02-07 10:54:13 +00:00
CONFIG_FIT=y
CONFIG_FIT_EXTERNAL_OFFSET=0x3000
CONFIG_FIT_VERBOSE=y
CONFIG_SPL_LOAD_FIT=y
# CONFIG_USE_SPL_FIT_GENERATOR is not set
CONFIG_OF_SYSTEM_SETUP=y
CONFIG_BOOTDELAY=1
CONFIG_USE_PREBOOT=y
CONFIG_PREBOOT="test -n ${fdtfile} || setenv fdtfile imx8mp-verdin-${variant}-${fdt_board}.dtb"
board: toradex: add verdin imx8m plus support This adds initial support for the Toradex Verdin iMX8M Plus Quad 4GB WB IT V1.0B module. They are strapped to boot from eFuses which are factory fused to properly boot from their on-module eMMC. U-Boot supports booting from the on-module eMMC only, SDP support is disabled for now due to missing i.MX 8M Plus USB support. Functionality wise the following is known to be working: - eMMC, 8-bit and 4-bit MMC/SD card slots - Ethernet both on-module eQoS and FEC (requires PHY on carrier board) - GPIOs - I2C Boot sequence is: SPL ---> ATF (TF-A) ---> U-boot proper ATF, U-boot proper and u-boot.dtb images are packed into a FIT image, loaded by SPL. Boot: U-Boot SPL 2022.04-rc1-00164-g21a0312611-dirty (Feb 07 2022 - 11:34:04 +0100) Quad die, dual rank failed, attempting dual die, single rank configuration. Normal Boot WDT: Started watchdog@30280000 with servicing (60s timeout) Trying to boot from BOOTROM Find img info 0x&48025a00, size 872 Need continue download 1024 Download 779264, Total size 780424 NOTICE: BL31: v2.2(release):rel_imx_5.4.70_2.3.2_rc1-5-g835a8f67b NOTICE: BL31: Built : 16:52:37, Aug 26 2021 U-Boot 2022.04-rc1-00164-g21a0312611-dirty (Feb 07 2022 - 11:34:04 +0100) CPU: Freescale i.MX8MP[8] rev1.1 at 1200 MHz Reset cause: POR DRAM: 8 GiB Core: 78 devices, 18 uclasses, devicetree: separate WDT: Started watchdog@30280000 with servicing (60s timeout) MMC: FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial Out: serial Err: serial Model: Toradex Verdin iMX8M Plus Quad 4GB Wi-Fi / BT IT V1.0B, Serial# 06817281 Carrier: Toradex Verdin Development Board V1.1A, Serial# 10807609 Setting variant to wifi Net: Hard-coding pdata->enetaddr eth1: ethernet@30be0000, eth0: ethernet@30bf0000 [PRIME] Hit any key to stop autoboot: 0 Verdin iMX8MP # Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2022-02-07 10:54:13 +00:00
CONFIG_LOG=y
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_DISPLAY_BOARDINFO_LATE=y
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_BOARD_LATE_INIT=y
CONFIG_SPL_BOARD_INIT=y
CONFIG_SPL_BOOTROM_SUPPORT=y
CONFIG_SPL_SYS_MALLOC_SIMPLE=y
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300
CONFIG_SPL_I2C=y
CONFIG_SPL_POWER=y
CONFIG_SPL_WATCHDOG=y
CONFIG_SYS_PROMPT="Verdin iMX8MP # "
# CONFIG_BOOTM_NETBSD is not set
CONFIG_CMD_ASKENV=y
# CONFIG_CMD_EXPORTENV is not set
# CONFIG_CMD_CRC32 is not set
CONFIG_CMD_MEMTEST=y
CONFIG_CMD_CLK=y
CONFIG_CMD_FUSE=y
CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_READ=y
CONFIG_CMD_USB=y
CONFIG_CMD_CACHE=y
CONFIG_CMD_UUID=y
CONFIG_CMD_REGULATOR=y
CONFIG_CMD_EXT4_WRITE=y
# CONFIG_ISO_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
CONFIG_OF_CONTROL=y
CONFIG_SPL_OF_CONTROL=y
CONFIG_ENV_OVERWRITE=y
CONFIG_ENV_IS_IN_MMC=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_SYS_MMC_ENV_DEV=2
CONFIG_SYS_MMC_ENV_PART=1
CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
CONFIG_USE_ETHPRIME=y
CONFIG_ETHPRIME="eth0"
board: toradex: add verdin imx8m plus support This adds initial support for the Toradex Verdin iMX8M Plus Quad 4GB WB IT V1.0B module. They are strapped to boot from eFuses which are factory fused to properly boot from their on-module eMMC. U-Boot supports booting from the on-module eMMC only, SDP support is disabled for now due to missing i.MX 8M Plus USB support. Functionality wise the following is known to be working: - eMMC, 8-bit and 4-bit MMC/SD card slots - Ethernet both on-module eQoS and FEC (requires PHY on carrier board) - GPIOs - I2C Boot sequence is: SPL ---> ATF (TF-A) ---> U-boot proper ATF, U-boot proper and u-boot.dtb images are packed into a FIT image, loaded by SPL. Boot: U-Boot SPL 2022.04-rc1-00164-g21a0312611-dirty (Feb 07 2022 - 11:34:04 +0100) Quad die, dual rank failed, attempting dual die, single rank configuration. Normal Boot WDT: Started watchdog@30280000 with servicing (60s timeout) Trying to boot from BOOTROM Find img info 0x&48025a00, size 872 Need continue download 1024 Download 779264, Total size 780424 NOTICE: BL31: v2.2(release):rel_imx_5.4.70_2.3.2_rc1-5-g835a8f67b NOTICE: BL31: Built : 16:52:37, Aug 26 2021 U-Boot 2022.04-rc1-00164-g21a0312611-dirty (Feb 07 2022 - 11:34:04 +0100) CPU: Freescale i.MX8MP[8] rev1.1 at 1200 MHz Reset cause: POR DRAM: 8 GiB Core: 78 devices, 18 uclasses, devicetree: separate WDT: Started watchdog@30280000 with servicing (60s timeout) MMC: FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial Out: serial Err: serial Model: Toradex Verdin iMX8M Plus Quad 4GB Wi-Fi / BT IT V1.0B, Serial# 06817281 Carrier: Toradex Verdin Development Board V1.1A, Serial# 10807609 Setting variant to wifi Net: Hard-coding pdata->enetaddr eth1: ethernet@30be0000, eth0: ethernet@30bf0000 [PRIME] Hit any key to stop autoboot: 0 Verdin iMX8MP # Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2022-02-07 10:54:13 +00:00
CONFIG_VERSION_VARIABLE=y
CONFIG_IP_DEFRAG=y
CONFIG_TFTP_BLOCKSIZE=4096
CONFIG_SPL_DM=y
CONFIG_REGMAP=y
CONFIG_SYSCON=y
CONFIG_BOOTCOUNT_LIMIT=y
CONFIG_BOOTCOUNT_ENV=y
CONFIG_CLK_COMPOSITE_CCF=y
CONFIG_CLK_IMX8MP=y
CONFIG_GPIO_HOG=y
CONFIG_MXC_GPIO=y
CONFIG_DM_PCA953X=y
CONFIG_DM_I2C=y
# CONFIG_SPL_DM_I2C is not set
CONFIG_SPL_SYS_I2C_LEGACY=y
CONFIG_MISC=y
CONFIG_I2C_EEPROM=y
CONFIG_SUPPORT_EMMC_BOOT=y
CONFIG_MMC_IO_VOLTAGE=y
CONFIG_MMC_UHS_SUPPORT=y
CONFIG_MMC_HS400_ES_SUPPORT=y
CONFIG_MMC_HS400_SUPPORT=y
CONFIG_FSL_USDHC=y
CONFIG_PHY_ADDR_ENABLE=y
CONFIG_PHY_MICREL=y
CONFIG_PHY_MICREL_KSZ90X1=y
CONFIG_DM_ETH=y
CONFIG_DM_ETH_PHY=y
CONFIG_DWC_ETH_QOS=y
CONFIG_DWC_ETH_QOS_IMX=y
CONFIG_FEC_MXC=y
CONFIG_RGMII=y
CONFIG_MII=y
CONFIG_PINCTRL=y
CONFIG_SPL_PINCTRL=y
CONFIG_PINCTRL_IMX8M=y
CONFIG_SPL_POWER_LEGACY=y
CONFIG_POWER_DOMAIN=y
CONFIG_IMX8M_POWER_DOMAIN=y
CONFIG_DM_REGULATOR=y
CONFIG_DM_REGULATOR_FIXED=y
CONFIG_DM_REGULATOR_GPIO=y
CONFIG_SPL_POWER_I2C=y
CONFIG_DM_SERIAL=y
board: toradex: add verdin imx8m plus support This adds initial support for the Toradex Verdin iMX8M Plus Quad 4GB WB IT V1.0B module. They are strapped to boot from eFuses which are factory fused to properly boot from their on-module eMMC. U-Boot supports booting from the on-module eMMC only, SDP support is disabled for now due to missing i.MX 8M Plus USB support. Functionality wise the following is known to be working: - eMMC, 8-bit and 4-bit MMC/SD card slots - Ethernet both on-module eQoS and FEC (requires PHY on carrier board) - GPIOs - I2C Boot sequence is: SPL ---> ATF (TF-A) ---> U-boot proper ATF, U-boot proper and u-boot.dtb images are packed into a FIT image, loaded by SPL. Boot: U-Boot SPL 2022.04-rc1-00164-g21a0312611-dirty (Feb 07 2022 - 11:34:04 +0100) Quad die, dual rank failed, attempting dual die, single rank configuration. Normal Boot WDT: Started watchdog@30280000 with servicing (60s timeout) Trying to boot from BOOTROM Find img info 0x&48025a00, size 872 Need continue download 1024 Download 779264, Total size 780424 NOTICE: BL31: v2.2(release):rel_imx_5.4.70_2.3.2_rc1-5-g835a8f67b NOTICE: BL31: Built : 16:52:37, Aug 26 2021 U-Boot 2022.04-rc1-00164-g21a0312611-dirty (Feb 07 2022 - 11:34:04 +0100) CPU: Freescale i.MX8MP[8] rev1.1 at 1200 MHz Reset cause: POR DRAM: 8 GiB Core: 78 devices, 18 uclasses, devicetree: separate WDT: Started watchdog@30280000 with servicing (60s timeout) MMC: FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial Out: serial Err: serial Model: Toradex Verdin iMX8M Plus Quad 4GB Wi-Fi / BT IT V1.0B, Serial# 06817281 Carrier: Toradex Verdin Development Board V1.1A, Serial# 10807609 Setting variant to wifi Net: Hard-coding pdata->enetaddr eth1: ethernet@30be0000, eth0: ethernet@30bf0000 [PRIME] Hit any key to stop autoboot: 0 Verdin iMX8MP # Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2022-02-07 10:54:13 +00:00
CONFIG_MXC_UART=y
CONFIG_SYSRESET=y
CONFIG_SPL_SYSRESET=y
CONFIG_SYSRESET_PSCI=y
CONFIG_SYSRESET_WATCHDOG=y
CONFIG_DM_THERMAL=y
CONFIG_USB=y
# CONFIG_SPL_DM_USB is not set
CONFIG_USB_EHCI_HCD=y
CONFIG_IMX_WATCHDOG=y
CONFIG_OF_LIBFDT_OVERLAY=y