mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-07 21:54:45 +00:00
27 lines
721 B
Text
27 lines
721 B
Text
|
How to use U-Boot on PHYTEC phyBOARD-i.MX6UL-Segin
|
||
|
|
--------------------------------------------------
|
||
|
|
|
||
|
|
- Configure and build U-Boot for phyCORE-i.MX6UL:
|
||
|
|
|
||
|
|
$ make mrproper
|
||
|
|
$ make phycore_pcl063_defconfig
|
||
|
|
$ make
|
||
|
|
|
||
|
|
This will generate SPL and u-boot-dtb.img images.
|
||
|
|
|
||
|
|
- The SPL and u-boot-dtb.img images need to be flashed into the micro SD card:
|
||
|
|
|
||
|
|
$ sudo dd if=SPL of=/dev/mmcblk0 bs=1k seek=1; sync
|
||
|
|
$ sudo dd if=u-boot-dtb.img of=/dev/mmcblk0 bs=1k seek=69; sync
|
||
|
|
|
||
|
|
- Jumper settings:
|
||
|
|
|
||
|
|
JP1: Open: Boot from NAND
|
||
|
|
Closed: Boot from SD/MMC1
|
||
|
|
|
||
|
|
- Connect the Serial cable to UART0 and the PC for the console.
|
||
|
|
|
||
|
|
- Insert the micro SD card in the board and power it up.
|
||
|
|
|
||
|
|
- U-Boot messages should come up.
|