u-boot/arch/sandbox/dts/test.dts

1033 lines
18 KiB
Text
Raw Normal View History

/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/gpio/sandbox-gpio.h>
/ {
model = "sandbox";
compatible = "sandbox";
#address-cells = <1>;
#size-cells = <1>;
aliases {
console = &uart0;
eth0 = "/eth@10002000";
eth3 = &eth_3;
eth5 = &eth_5;
gpio1 = &gpio_a;
gpio2 = &gpio_b;
gpio3 = &gpio_c;
i2c0 = "/i2c@0";
mmc0 = "/mmc0";
mmc1 = "/mmc1";
pci0 = &pci0;
pci1 = &pci1;
pci2 = &pci2;
remoteproc1 = &rproc_1;
remoteproc2 = &rproc_2;
rtc0 = &rtc_0;
rtc1 = &rtc_1;
spi0 = "/spi@0";
testfdt6 = "/e-test";
testbus3 = "/some-bus";
testfdt0 = "/some-bus/c-test@0";
testfdt1 = "/some-bus/c-test@1";
testfdt3 = "/b-test";
testfdt5 = "/some-bus/c-test@5";
testfdt8 = "/a-test";
test: dm: Fix wrong aliases property names After importing v4.17-rc1 Linux commit 9130ba884640 ("scripts/dtc: Update to upstream version v1.4.6-9-gaadd0b65c987"), sandbox build reports below warnings: arch/sandbox/dts/test.dtb: Warning (alias_paths): /aliases: aliases property name must include only lowercase and '-' arch/sandbox/dts/test.dtb: Warning (alias_paths): /aliases: aliases property name must include only lowercase and '-' arch/sandbox/dts/test.dtb: Warning (alias_paths): /aliases: aliases property name must include only lowercase and '-' arch/sandbox/dts/test.dtb: Warning (alias_paths): /aliases: aliases property name must include only lowercase and '-' Silent them by applying the 's/_/-/' substitution in the names of the 'fdt_dummy0', 'fdt_dummy1', 'fdt_dummy2', 'fdt_dummy3' properties. Similar DTC warnings have been recently fixed in Linux kernel, e.g. via v4.17-rc1 commit d366c30d19f4 ("ARM: dts: STi: Fix aliases property name for STi boards"). If done alone, the DTS update generates a failure of the `ut dm fdt_translation` unit test in sandbox environment as seen below: $ ./u-boot -d arch/sandbox/dts/test.dtb ---<-snip->--- => ut dm fdt_translation Test: dm_test_fdt_translation: test-fdt.c test/dm/test-fdt.c:444, dm_test_fdt_translation(): 0 == uclass_find_device_by_seq(UCLASS_TEST_DUMMY, 0, 1, &dev): Expected 0, got -19 Test: dm_test_fdt_translation: test-fdt.c (flat tree) test/dm/test-fdt.c:444, dm_test_fdt_translation(): 0 == uclass_find_device_by_seq(UCLASS_TEST_DUMMY, 0, 1, &dev): Expected 0, got -19 Failures: 2 ---<-snip->--- Fix this issue in place, by updating the "name" string in the UCLASS_DRIVER(fdt_dummy) definition, so that it matches the newly updated aliases properties. After that, the test passes: $ ./u-boot -d arch/sandbox/dts/test.dtb ---<-snip->--- => ut dm fdt_translation Test: dm_test_fdt_translation: test-fdt.c Test: dm_test_fdt_translation: test-fdt.c (flat tree) Failures: 0 ---<-snip->--- Fixes: e8d5291824e2 ("core: ofnode: Fix translation for #size-cells == 0") Reported-by: Petr Vorel <pvorel@suse.cz> Signed-off-by: Eugeniu Rosca <erosca@de.adit-jv.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-05-19 12:13:55 +00:00
fdt-dummy0 = "/translation-test@8000/dev@0,0";
fdt-dummy1 = "/translation-test@8000/dev@1,100";
fdt-dummy2 = "/translation-test@8000/dev@2,200";
fdt-dummy3 = "/translation-test@8000/noxlatebus@3,300/dev@42";
usb0 = &usb_0;
usb1 = &usb_1;
usb2 = &usb_2;
axi0 = &axi;
osd0 = "/osd";
};
audio: audio-codec {
compatible = "sandbox,audio-codec";
#sound-dai-cells = <1>;
};
cros_ec: cros-ec {
reg = <0 0>;
compatible = "google,cros-ec-sandbox";
/*
* This describes the flash memory within the EC. Note
* that the STM32L flash erases to 0, not 0xff.
*/
flash {
image-pos = <0x08000000>;
size = <0x20000>;
erase-value = <0>;
/* Information for sandbox */
ro {
image-pos = <0>;
size = <0xf000>;
};
wp-ro {
image-pos = <0xf000>;
size = <0x1000>;
};
rw {
image-pos = <0x10000>;
size = <0x10000>;
};
};
};
dsi_host: dsi_host {
compatible = "sandbox,dsi-host";
};
a-test {
reg = <0 1>;
compatible = "denx,u-boot-fdt-test";
ping-expect = <0>;
ping-add = <0>;
u-boot,dm-pre-reloc;
test-gpios = <&gpio_a 1>, <&gpio_a 4>,
<&gpio_b 5 GPIO_ACTIVE_HIGH 3 2 1>,
<0>, <&gpio_a 12>;
test2-gpios = <&gpio_a 1>, <&gpio_a 4>,
<&gpio_b 6 GPIO_ACTIVE_LOW 3 2 1>,
<&gpio_b 7 GPIO_IN 3 2 1>,
<&gpio_b 8 GPIO_OUT 3 2 1>,
<&gpio_b 9 (GPIO_OUT|GPIO_OUT_ACTIVE) 3 2 1>;
test3-gpios =
<&gpio_c 0 (GPIO_OUT|GPIO_OPEN_DRAIN)>,
<&gpio_c 1 (GPIO_OUT|GPIO_OPEN_SOURCE)>,
<&gpio_c 2 GPIO_OUT>,
<&gpio_c 3 (GPIO_IN|GPIO_PULL_UP)>,
<&gpio_c 4 (GPIO_IN|GPIO_PULL_DOWN)>,
<&gpio_c 5 GPIO_IN>;
int-value = <1234>;
uint-value = <(-1234)>;
int64-value = /bits/ 64 <0x1111222233334444>;
int-array = <5678 9123 4567>;
interrupts-extended = <&irq 3 0>;
};
junk {
reg = <1 1>;
compatible = "not,compatible";
};
no-compatible {
reg = <2 1>;
};
backlight: backlight {
compatible = "pwm-backlight";
enable-gpios = <&gpio_a 1>;
power-supply = <&ldo_1>;
pwms = <&pwm 0 1000>;
default-brightness-level = <5>;
brightness-levels = <0 16 32 64 128 170 202 234 255>;
};
bind-test {
bind-test-child1 {
compatible = "sandbox,phy";
#phy-cells = <1>;
};
bind-test-child2 {
compatible = "simple-bus";
};
};
b-test {
reg = <3 1>;
compatible = "denx,u-boot-fdt-test";
ping-expect = <3>;
ping-add = <3>;
};
phy_provider0: gen_phy@0 {
compatible = "sandbox,phy";
#phy-cells = <1>;
};
phy_provider1: gen_phy@1 {
compatible = "sandbox,phy";
#phy-cells = <0>;
broken;
};
phy_provider2: gen_phy@2 {
compatible = "sandbox,phy";
#phy-cells = <0>;
};
gen_phy_user: gen_phy_user {
compatible = "simple-bus";
phys = <&phy_provider0 0>, <&phy_provider0 1>, <&phy_provider1>;
phy-names = "phy1", "phy2", "phy3";
};
gen_phy_user1: gen_phy_user1 {
compatible = "simple-bus";
phys = <&phy_provider0 0>, <&phy_provider2>;
phy-names = "phy1", "phy2";
};
some-bus {
#address-cells = <1>;
#size-cells = <0>;
compatible = "denx,u-boot-test-bus";
reg = <3 1>;
ping-expect = <4>;
ping-add = <4>;
c-test@5 {
compatible = "denx,u-boot-fdt-test";
reg = <5>;
ping-expect = <5>;
ping-add = <5>;
};
c-test@0 {
compatible = "denx,u-boot-fdt-test";
reg = <0>;
ping-expect = <6>;
ping-add = <6>;
};
c-test@1 {
compatible = "denx,u-boot-fdt-test";
reg = <1>;
ping-expect = <7>;
ping-add = <7>;
};
};
d-test {
reg = <3 1>;
ping-expect = <6>;
ping-add = <6>;
compatible = "google,another-fdt-test";
};
e-test {
reg = <3 1>;
ping-expect = <6>;
ping-add = <6>;
compatible = "google,another-fdt-test";
};
f-test {
compatible = "denx,u-boot-fdt-test";
};
g-test {
compatible = "denx,u-boot-fdt-test";
};
h-test {
compatible = "denx,u-boot-fdt-test1";
};
i-test {
compatible = "mediatek,u-boot-fdt-test";
#address-cells = <1>;
#size-cells = <0>;
subnode@0 {
reg = <0>;
};
subnode@1 {
reg = <1>;
};
subnode@2 {
reg = <2>;
};
};
devres-test {
compatible = "denx,u-boot-devres-test";
};
acpi-test {
compatible = "denx,u-boot-acpi-test";
};
acpi-test2 {
compatible = "denx,u-boot-acpi-test";
};
clocks {
clk_fixed: clk-fixed {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <1234>;
};
clk_fixed_factor: clk-fixed-factor {
compatible = "fixed-factor-clock";
#clock-cells = <0>;
clock-div = <3>;
clock-mult = <2>;
clocks = <&clk_fixed>;
};
osc {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <20000000>;
};
};
clk_sandbox: clk-sbox {
compatible = "sandbox,clk";
#clock-cells = <1>;
assigned-clocks = <&clk_sandbox 3>;
assigned-clock-rates = <321>;
};
clk-test {
compatible = "sandbox,clk-test";
clocks = <&clk_fixed>,
<&clk_sandbox 1>,
<&clk_sandbox 0>,
<&clk_sandbox 3>,
<&clk_sandbox 2>;
clock-names = "fixed", "i2c", "spi", "uart2", "uart1";
};
ccf: clk-ccf {
compatible = "sandbox,clk-ccf";
};
eth@10002000 {
compatible = "sandbox,eth";
reg = <0x10002000 0x1000>;
fake-host-hwaddr = [00 00 66 44 22 00];
};
eth_5: eth@10003000 {
compatible = "sandbox,eth";
reg = <0x10003000 0x1000>;
fake-host-hwaddr = [00 00 66 44 22 11];
};
eth_3: sbe5 {
compatible = "sandbox,eth";
reg = <0x10005000 0x1000>;
fake-host-hwaddr = [00 00 66 44 22 33];
};
eth@10004000 {
compatible = "sandbox,eth";
reg = <0x10004000 0x1000>;
fake-host-hwaddr = [00 00 66 44 22 22];
};
firmware {
sandbox_firmware: sandbox-firmware {
compatible = "sandbox,firmware";
};
};
pinctrl-gpio {
compatible = "sandbox,pinctrl-gpio";
gpio_a: base-gpios {
compatible = "sandbox,gpio";
gpio-controller;
#gpio-cells = <1>;
gpio-bank-name = "a";
sandbox,gpio-count = <20>;
};
gpio_b: extra-gpios {
compatible = "sandbox,gpio";
gpio-controller;
#gpio-cells = <5>;
gpio-bank-name = "b";
sandbox,gpio-count = <10>;
};
gpio_c: pinmux-gpios {
compatible = "sandbox,gpio";
gpio-controller;
#gpio-cells = <2>;
gpio-bank-name = "c";
sandbox,gpio-count = <10>;
};
};
i2c@0 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0 1>;
compatible = "sandbox,i2c";
clock-frequency = <100000>;
eeprom@2c {
reg = <0x2c>;
compatible = "i2c-eeprom";
sandbox,emul = <&emul_eeprom>;
};
rtc_0: rtc@43 {
reg = <0x43>;
compatible = "sandbox-rtc";
sandbox,emul = <&emul0>;
};
rtc_1: rtc@61 {
reg = <0x61>;
compatible = "sandbox-rtc";
sandbox,emul = <&emul1>;
};
i2c_emul: emul {
reg = <0xff>;
compatible = "sandbox,i2c-emul-parent";
emul_eeprom: emul-eeprom {
compatible = "sandbox,i2c-eeprom";
sandbox,filename = "i2c.bin";
sandbox,size = <256>;
};
emul0: emul0 {
compatible = "sandbox,i2c-rtc";
};
emul1: emull {
compatible = "sandbox,i2c-rtc";
};
};
sandbox_pmic: sandbox_pmic {
reg = <0x40>;
sandbox,emul = <&emul_pmic0>;
};
mc34708: pmic@41 {
reg = <0x41>;
sandbox,emul = <&emul_pmic1>;
};
};
bootcount@0 {
compatible = "u-boot,bootcount-rtc";
rtc = <&rtc_1>;
offset = <0x13>;
};
adc@0 {
compatible = "sandbox,adc";
vdd-supply = <&buck2>;
vss-microvolts = <0>;
};
irq: irq {
compatible = "sandbox,irq";
interrupt-controller;
#interrupt-cells = <2>;
};
lcd {
u-boot,dm-pre-reloc;
compatible = "sandbox,lcd-sdl";
xres = <1366>;
yres = <768>;
};
leds {
compatible = "gpio-leds";
iracibble {
gpios = <&gpio_a 1 0>;
label = "sandbox:red";
};
martinet {
gpios = <&gpio_a 2 0>;
label = "sandbox:green";
};
default_on {
gpios = <&gpio_a 5 0>;
label = "sandbox:default_on";
default-state = "on";
};
default_off {
gpios = <&gpio_a 6 0>;
label = "sandbox:default_off";
default-state = "off";
};
};
mbox: mbox {
compatible = "sandbox,mbox";
#mbox-cells = <1>;
};
mbox-test {
compatible = "sandbox,mbox-test";
mboxes = <&mbox 100>, <&mbox 1>;
mbox-names = "other", "test";
};
cpus {
cpu-test1 {
compatible = "sandbox,cpu_sandbox";
u-boot,dm-pre-reloc;
};
cpu-test2 {
compatible = "sandbox,cpu_sandbox";
u-boot,dm-pre-reloc;
};
cpu-test3 {
compatible = "sandbox,cpu_sandbox";
u-boot,dm-pre-reloc;
};
};
i2s: i2s {
compatible = "sandbox,i2s";
#sound-dai-cells = <1>;
sandbox,silent; /* Don't emit sounds while testing */
};
nop-test_0 {
compatible = "sandbox,nop_sandbox1";
nop-test_1 {
compatible = "sandbox,nop_sandbox2";
bind = "True";
};
nop-test_2 {
compatible = "sandbox,nop_sandbox2";
bind = "False";
};
};
misc-test {
compatible = "sandbox,misc_sandbox";
};
mmc2 {
compatible = "sandbox,mmc";
};
mmc1 {
compatible = "sandbox,mmc";
};
mmc0 {
compatible = "sandbox,mmc";
};
pch {
compatible = "sandbox,pch";
};
pci0: pci@0 {
compatible = "sandbox,pci";
device_type = "pci";
bus-range = <0x00 0xff>;
#address-cells = <3>;
#size-cells = <2>;
ranges = <0x02000000 0 0x10000000 0x10000000 0 0x2000000
0x01000000 0 0x20000000 0x20000000 0 0x2000>;
pci@0,0 {
compatible = "pci-generic";
reg = <0x0000 0 0 0 0>;
pci: sandbox: Move the emulators into their own node Sandbox pci works using emulation drivers which are currently children of the pci device: pci-controller { pci@1f,0 { compatible = "pci-generic"; reg = <0xf800 0 0 0 0>; emul@1f,0 { compatible = "sandbox,swap-case"; }; }; }; In this case the emulation device is attached to pci device on address f800 (device 1f, function 0) and provides the swap-case functionality. However this is not ideal, since every device on a PCI bus has a child device. This is only really the case for sandbox, but we want to avoid special-case code for sandbox. Worse, child devices cannot be probed before their parents. This forces us to use 'find' rather than 'get' to obtain the emulator device. In fact the emulator devices are never probed. There is code in sandbox_pci_emul_post_probe() which tries to track when emulators are active, but at present this does not work. A better approach seems to be to add a separate node elsewhere in the device tree, an 'emulation parent'. This could be given a bogus address (such as -1) to hide the emulators away from the 'pci' command, but it seems better to keep it at the root node to avoid such hacks. Then we can use a phandle to point from the device to the correct emulator, and only on sandbox. The code to find an emulator does not interfere with normal pci operation. Add a new UCLASS_PCI_EMUL_PARENT uclass which allows finding an emulator given a bus, and finding a bus given an emulator. Update the existing device trees and the code for finding an emulator. This brings PCI emulators more into line with I2C. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com> [bmeng: fix 3 typos in the commit message; encode bus number in the labels of swap_case_emul nodes; mention commit 4345998ae9df in sandbox_pci_get_emul()] Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2019-09-25 14:56:10 +00:00
sandbox,emul = <&swap_case_emul0_0>;
};
pci@1,0 {
compatible = "pci-generic";
/* reg 0 is at 0x14, using FDT_PCI_SPACE_MEM32 */
reg = <0x02000814 0 0 0 0
0x01000810 0 0 0 0>;
pci: sandbox: Move the emulators into their own node Sandbox pci works using emulation drivers which are currently children of the pci device: pci-controller { pci@1f,0 { compatible = "pci-generic"; reg = <0xf800 0 0 0 0>; emul@1f,0 { compatible = "sandbox,swap-case"; }; }; }; In this case the emulation device is attached to pci device on address f800 (device 1f, function 0) and provides the swap-case functionality. However this is not ideal, since every device on a PCI bus has a child device. This is only really the case for sandbox, but we want to avoid special-case code for sandbox. Worse, child devices cannot be probed before their parents. This forces us to use 'find' rather than 'get' to obtain the emulator device. In fact the emulator devices are never probed. There is code in sandbox_pci_emul_post_probe() which tries to track when emulators are active, but at present this does not work. A better approach seems to be to add a separate node elsewhere in the device tree, an 'emulation parent'. This could be given a bogus address (such as -1) to hide the emulators away from the 'pci' command, but it seems better to keep it at the root node to avoid such hacks. Then we can use a phandle to point from the device to the correct emulator, and only on sandbox. The code to find an emulator does not interfere with normal pci operation. Add a new UCLASS_PCI_EMUL_PARENT uclass which allows finding an emulator given a bus, and finding a bus given an emulator. Update the existing device trees and the code for finding an emulator. This brings PCI emulators more into line with I2C. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com> [bmeng: fix 3 typos in the commit message; encode bus number in the labels of swap_case_emul nodes; mention commit 4345998ae9df in sandbox_pci_get_emul()] Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2019-09-25 14:56:10 +00:00
sandbox,emul = <&swap_case_emul0_1>;
};
p2sb-pci@2,0 {
compatible = "sandbox,p2sb";
reg = <0x02001010 0 0 0 0>;
sandbox,emul = <&p2sb_emul>;
adder {
intel,p2sb-port-id = <3>;
compatible = "sandbox,adder";
};
};
pci@1e,0 {
compatible = "sandbox,pmc";
reg = <0xf000 0 0 0 0>;
sandbox,emul = <&pmc_emul1e>;
acpi-base = <0x400>;
gpe0-dwx-mask = <0xf>;
gpe0-dwx-shift-base = <4>;
gpe0-dw = <6 7 9>;
gpe0-sts = <0x20>;
gpe0-en = <0x30>;
};
pci@1f,0 {
compatible = "pci-generic";
/* reg 0 is at 0x10, using FDT_PCI_SPACE_IO */
reg = <0x0100f810 0 0 0 0>;
pci: sandbox: Move the emulators into their own node Sandbox pci works using emulation drivers which are currently children of the pci device: pci-controller { pci@1f,0 { compatible = "pci-generic"; reg = <0xf800 0 0 0 0>; emul@1f,0 { compatible = "sandbox,swap-case"; }; }; }; In this case the emulation device is attached to pci device on address f800 (device 1f, function 0) and provides the swap-case functionality. However this is not ideal, since every device on a PCI bus has a child device. This is only really the case for sandbox, but we want to avoid special-case code for sandbox. Worse, child devices cannot be probed before their parents. This forces us to use 'find' rather than 'get' to obtain the emulator device. In fact the emulator devices are never probed. There is code in sandbox_pci_emul_post_probe() which tries to track when emulators are active, but at present this does not work. A better approach seems to be to add a separate node elsewhere in the device tree, an 'emulation parent'. This could be given a bogus address (such as -1) to hide the emulators away from the 'pci' command, but it seems better to keep it at the root node to avoid such hacks. Then we can use a phandle to point from the device to the correct emulator, and only on sandbox. The code to find an emulator does not interfere with normal pci operation. Add a new UCLASS_PCI_EMUL_PARENT uclass which allows finding an emulator given a bus, and finding a bus given an emulator. Update the existing device trees and the code for finding an emulator. This brings PCI emulators more into line with I2C. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com> [bmeng: fix 3 typos in the commit message; encode bus number in the labels of swap_case_emul nodes; mention commit 4345998ae9df in sandbox_pci_get_emul()] Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2019-09-25 14:56:10 +00:00
sandbox,emul = <&swap_case_emul0_1f>;
};
};
pci-emul0 {
compatible = "sandbox,pci-emul-parent";
swap_case_emul0_0: emul0@0,0 {
compatible = "sandbox,swap-case";
};
swap_case_emul0_1: emul0@1,0 {
compatible = "sandbox,swap-case";
use-ea;
};
swap_case_emul0_1f: emul0@1f,0 {
compatible = "sandbox,swap-case";
};
p2sb_emul: emul@2,0 {
compatible = "sandbox,p2sb-emul";
};
pmc_emul1e: emul@1e,0 {
compatible = "sandbox,pmc-emul";
};
};
pci1: pci@1 {
compatible = "sandbox,pci";
device_type = "pci";
bus-range = <0x00 0xff>;
#address-cells = <3>;
#size-cells = <2>;
ranges = <0x02000000 0 0x30000000 0x30000000 0 0x2000
0x01000000 0 0x40000000 0x40000000 0 0x2000>;
sandbox,dev-info = <0x08 0x00 0x1234 0x5678
0x0c 0x00 0x1234 0x5678
0x10 0x00 0x1234 0x5678>;
pci@10,0 {
reg = <0x8000 0 0 0 0>;
};
};
pci2: pci@2 {
compatible = "sandbox,pci";
device_type = "pci";
bus-range = <0x00 0xff>;
#address-cells = <3>;
#size-cells = <2>;
ranges = <0x02000000 0 0x50000000 0x50000000 0 0x2000
0x01000000 0 0x60000000 0x60000000 0 0x2000>;
sandbox,dev-info = <0x08 0x00 0x1234 0x5678>;
pci@1f,0 {
compatible = "pci-generic";
reg = <0xf800 0 0 0 0>;
pci: sandbox: Move the emulators into their own node Sandbox pci works using emulation drivers which are currently children of the pci device: pci-controller { pci@1f,0 { compatible = "pci-generic"; reg = <0xf800 0 0 0 0>; emul@1f,0 { compatible = "sandbox,swap-case"; }; }; }; In this case the emulation device is attached to pci device on address f800 (device 1f, function 0) and provides the swap-case functionality. However this is not ideal, since every device on a PCI bus has a child device. This is only really the case for sandbox, but we want to avoid special-case code for sandbox. Worse, child devices cannot be probed before their parents. This forces us to use 'find' rather than 'get' to obtain the emulator device. In fact the emulator devices are never probed. There is code in sandbox_pci_emul_post_probe() which tries to track when emulators are active, but at present this does not work. A better approach seems to be to add a separate node elsewhere in the device tree, an 'emulation parent'. This could be given a bogus address (such as -1) to hide the emulators away from the 'pci' command, but it seems better to keep it at the root node to avoid such hacks. Then we can use a phandle to point from the device to the correct emulator, and only on sandbox. The code to find an emulator does not interfere with normal pci operation. Add a new UCLASS_PCI_EMUL_PARENT uclass which allows finding an emulator given a bus, and finding a bus given an emulator. Update the existing device trees and the code for finding an emulator. This brings PCI emulators more into line with I2C. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com> [bmeng: fix 3 typos in the commit message; encode bus number in the labels of swap_case_emul nodes; mention commit 4345998ae9df in sandbox_pci_get_emul()] Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2019-09-25 14:56:10 +00:00
sandbox,emul = <&swap_case_emul2_1f>;
};
};
pci-emul2 {
compatible = "sandbox,pci-emul-parent";
swap_case_emul2_1f: emul2@1f,0 {
compatible = "sandbox,swap-case";
};
};
pci_ep: pci_ep {
compatible = "sandbox,pci_ep";
};
probing {
compatible = "simple-bus";
test1 {
compatible = "denx,u-boot-probe-test";
};
test2 {
compatible = "denx,u-boot-probe-test";
};
test3 {
compatible = "denx,u-boot-probe-test";
};
test4 {
compatible = "denx,u-boot-probe-test";
first-syscon = <&syscon0>;
second-sys-ctrl = <&another_system_controller>;
third-syscon = <&syscon2>;
};
};
pwrdom: power-domain {
compatible = "sandbox,power-domain";
#power-domain-cells = <1>;
};
power-domain-test {
compatible = "sandbox,power-domain-test";
power-domains = <&pwrdom 2>;
};
pwm: pwm {
compatible = "sandbox,pwm";
#pwm-cells = <2>;
};
pwm2 {
compatible = "sandbox,pwm";
#pwm-cells = <2>;
};
ram {
compatible = "sandbox,ram";
};
reset@0 {
compatible = "sandbox,warm-reset";
};
reset@1 {
compatible = "sandbox,reset";
};
resetc: reset-ctl {
compatible = "sandbox,reset-ctl";
#reset-cells = <1>;
};
reset-ctl-test {
compatible = "sandbox,reset-ctl-test";
resets = <&resetc 100>, <&resetc 2>;
reset-names = "other", "test";
};
rng {
compatible = "sandbox,sandbox-rng";
};
rproc_1: rproc@1 {
compatible = "sandbox,test-processor";
remoteproc-name = "remoteproc-test-dev1";
};
rproc_2: rproc@2 {
compatible = "sandbox,test-processor";
internal-memory-mapped;
remoteproc-name = "remoteproc-test-dev2";
};
panel {
compatible = "simple-panel";
backlight = <&backlight 0 100>;
};
smem@0 {
compatible = "sandbox,smem";
};
sound {
compatible = "sandbox,sound";
cpu {
sound-dai = <&i2s 0>;
};
codec {
sound-dai = <&audio 0>;
};
};
spi@0 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0 1>;
compatible = "sandbox,spi";
cs-gpios = <0>, <&gpio_a 0>;
spi.bin@0 {
reg = <0>;
compatible = "spansion,m25p16", "jedec,spi-nor";
spi-max-frequency = <40000000>;
sandbox,filename = "spi.bin";
};
};
syscon0: syscon@0 {
compatible = "sandbox,syscon0";
reg = <0x10 16>;
};
another_system_controller: syscon@1 {
compatible = "sandbox,syscon1";
reg = <0x20 5
0x28 6
0x30 7
0x38 8>;
};
syscon2: syscon@2 {
compatible = "simple-mfd", "syscon";
reg = <0x40 5
0x48 6
0x50 7
0x58 8>;
};
timer {
compatible = "sandbox,timer";
clock-frequency = <1000000>;
};
tpm2 {
compatible = "sandbox,tpm2";
};
uart0: serial {
compatible = "sandbox,serial";
u-boot,dm-pre-reloc;
};
usb_0: usb@0 {
compatible = "sandbox,usb";
status = "disabled";
hub {
compatible = "sandbox,usb-hub";
#address-cells = <1>;
#size-cells = <0>;
flash-stick {
reg = <0>;
compatible = "sandbox,usb-flash";
};
};
};
usb_1: usb@1 {
compatible = "sandbox,usb";
hub {
compatible = "usb-hub";
usb,device-class = <9>;
hub-emul {
compatible = "sandbox,usb-hub";
#address-cells = <1>;
#size-cells = <0>;
flash-stick@0 {
reg = <0>;
compatible = "sandbox,usb-flash";
sandbox,filepath = "testflash.bin";
};
flash-stick@1 {
reg = <1>;
compatible = "sandbox,usb-flash";
sandbox,filepath = "testflash1.bin";
};
flash-stick@2 {
reg = <2>;
compatible = "sandbox,usb-flash";
sandbox,filepath = "testflash2.bin";
};
keyb@3 {
reg = <3>;
compatible = "sandbox,usb-keyb";
};
};
};
};
usb_2: usb@2 {
compatible = "sandbox,usb";
status = "disabled";
};
spmi: spmi@0 {
compatible = "sandbox,spmi";
#address-cells = <0x1>;
#size-cells = <0x1>;
ranges;
pm8916@0 {
compatible = "qcom,spmi-pmic";
reg = <0x0 0x1>;
#address-cells = <0x1>;
#size-cells = <0x1>;
ranges;
spmi_gpios: gpios@c000 {
compatible = "qcom,pm8916-gpio";
reg = <0xc000 0x400>;
gpio-controller;
gpio-count = <4>;
#gpio-cells = <2>;
gpio-bank-name="spmi";
};
};
};
wdt0: wdt@0 {
compatible = "sandbox,wdt";
};
axi: axi@0 {
compatible = "sandbox,axi";
#address-cells = <0x1>;
#size-cells = <0x1>;
store@0 {
compatible = "sandbox,sandbox_store";
reg = <0x0 0x400>;
};
};
chosen {
#address-cells = <1>;
#size-cells = <1>;
setting = "sunrise ohoka";
other-node = "/some-bus/c-test@5";
int-values = <0x1937 72993>;
chosen-test {
compatible = "denx,u-boot-fdt-test";
reg = <9 1>;
};
};
translation-test@8000 {
compatible = "simple-bus";
reg = <0x8000 0x4000>;
#address-cells = <0x2>;
#size-cells = <0x1>;
ranges = <0 0x0 0x8000 0x1000
1 0x100 0x9000 0x1000
2 0x200 0xA000 0x1000
3 0x300 0xB000 0x1000
>;
dma-ranges = <0 0x000 0x10000000 0x1000
1 0x100 0x20000000 0x1000
>;
dev@0,0 {
compatible = "denx,u-boot-fdt-dummy";
reg = <0 0x0 0x1000>;
reg-names = "sandbox-dummy-0";
};
dev@1,100 {
compatible = "denx,u-boot-fdt-dummy";
reg = <1 0x100 0x1000>;
};
dev@2,200 {
compatible = "denx,u-boot-fdt-dummy";
reg = <2 0x200 0x1000>;
};
noxlatebus@3,300 {
compatible = "simple-bus";
reg = <3 0x300 0x1000>;
#address-cells = <0x1>;
#size-cells = <0x0>;
dev@42 {
compatible = "denx,u-boot-fdt-dummy";
reg = <0x42>;
};
};
};
osd {
compatible = "sandbox,sandbox_osd";
};
2018-09-30 22:16:51 +00:00
board {
compatible = "sandbox,board_sandbox";
};
sandbox_tee {
compatible = "sandbox,tee";
};
sandbox_virtio1 {
compatible = "sandbox,virtio1";
};
sandbox_virtio2 {
compatible = "sandbox,virtio2";
};
pinctrl {
compatible = "sandbox,pinctrl";
pinctrl-names = "default";
pinctrl-0 = <&gpios>;
gpios: gpios {
gpio0 {
pins = "GPIO0";
bias-pull-up;
input-disable;
};
gpio1 {
pins = "GPIO1";
output-high;
drive-open-drain;
};
gpio2 {
pins = "GPIO2";
bias-pull-down;
input-enable;
};
gpio3 {
pins = "GPIO3";
bias-disable;
};
};
};
hwspinlock@0 {
compatible = "sandbox,hwspinlock";
};
dma: dma {
compatible = "sandbox,dma";
#dma-cells = <1>;
dmas = <&dma 0>, <&dma 1>, <&dma 2>;
dma-names = "m2m", "tx0", "rx0";
};
/*
* keep mdio-mux ahead of mdio so that the mux is removed first at the
* end of the test. If parent mdio is removed first, clean-up of the
* mux will trigger a 2nd probe of parent-mdio, leaving parent-mdio
* active at the end of the test. That it turn doesn't allow the mdio
* class to be destroyed, triggering an error.
*/
mdio-mux-test {
compatible = "sandbox,mdio-mux";
#address-cells = <1>;
#size-cells = <0>;
mdio-parent-bus = <&mdio>;
mdio-ch-test@0 {
reg = <0>;
};
mdio-ch-test@1 {
reg = <1>;
};
};
mdio: mdio-test {
compatible = "sandbox,mdio";
};
};
#include "sandbox_pmic.dtsi"