u-boot/board/davinci/sonata/dv_board.c

207 lines
5 KiB
C
Raw Normal View History

/*
* Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
*
* Parts are shamelessly stolen from various TI sources, original copyright
* follows:
* -----------------------------------------------------------------
*
* Copyright (C) 2004 Texas Instruments.
*
* ----------------------------------------------------------------------------
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
* ----------------------------------------------------------------------------
*/
#include <common.h>
#include <i2c.h>
#include <asm/arch/hardware.h>
#include <asm/arch/emac_defs.h>
#define MACH_TYPE_SONATA 1254
DECLARE_GLOBAL_DATA_PTR;
extern void i2c_init(int speed, int slaveaddr);
extern void timer_init(void);
extern int eth_hw_init(void);
extern phy_t phy;
/* Works on Always On power domain only (no PD argument) */
void lpsc_on(unsigned int id)
{
dv_reg_p mdstat, mdctl;
if (id >= DAVINCI_LPSC_GEM)
return; /* Don't work on DSP Power Domain */
mdstat = REG_P(PSC_MDSTAT_BASE + (id * 4));
mdctl = REG_P(PSC_MDCTL_BASE + (id * 4));
while (REG(PSC_PTSTAT) & 0x01) {;}
if ((*mdstat & 0x1f) == 0x03)
return; /* Already on and enabled */
*mdctl |= 0x03;
/* Special treatment for some modules as for sprue14 p.7.4.2 */
if ( (id == DAVINCI_LPSC_VPSSSLV) ||
(id == DAVINCI_LPSC_EMAC) ||
(id == DAVINCI_LPSC_EMAC_WRAPPER) ||
(id == DAVINCI_LPSC_MDIO) ||
(id == DAVINCI_LPSC_USB) ||
(id == DAVINCI_LPSC_ATA) ||
(id == DAVINCI_LPSC_VLYNQ) ||
(id == DAVINCI_LPSC_UHPI) ||
(id == DAVINCI_LPSC_DDR_EMIF) ||
(id == DAVINCI_LPSC_AEMIF) ||
(id == DAVINCI_LPSC_MMC_SD) ||
(id == DAVINCI_LPSC_MEMSTICK) ||
(id == DAVINCI_LPSC_McBSP) ||
(id == DAVINCI_LPSC_GPIO)
)
*mdctl |= 0x200;
REG(PSC_PTCMD) = 0x01;
while (REG(PSC_PTSTAT) & 0x03) {;}
while ((*mdstat & 0x1f) != 0x03) {;} /* Probably an overkill... */
}
void dsp_on(void)
{
int i;
if (REG(PSC_PDSTAT1) & 0x1f)
return; /* Already on */
REG(PSC_GBLCTL) |= 0x01;
REG(PSC_PDCTL1) |= 0x01;
REG(PSC_PDCTL1) &= ~0x100;
REG(PSC_MDCTL_BASE + (DAVINCI_LPSC_GEM * 4)) |= 0x03;
REG(PSC_MDCTL_BASE + (DAVINCI_LPSC_GEM * 4)) &= 0xfffffeff;
REG(PSC_MDCTL_BASE + (DAVINCI_LPSC_IMCOP * 4)) |= 0x03;
REG(PSC_MDCTL_BASE + (DAVINCI_LPSC_IMCOP * 4)) &= 0xfffffeff;
REG(PSC_PTCMD) = 0x02;
for (i = 0; i < 100; i++) {
if (REG(PSC_EPCPR) & 0x02)
break;
}
REG(PSC_CHP_SHRTSW) = 0x01;
REG(PSC_PDCTL1) |= 0x100;
REG(PSC_EPCCR) = 0x02;
for (i = 0; i < 100; i++) {
if (!(REG(PSC_PTSTAT) & 0x02))
break;
}
REG(PSC_GBLCTL) &= ~0x1f;
}
int board_init(void)
{
/* arch number of the board */
gd->bd->bi_arch_number = MACH_TYPE_SONATA;
/* address of boot parameters */
gd->bd->bi_boot_params = LINUX_BOOT_PARAM_ADDR;
/* Workaround for TMS320DM6446 errata 1.3.22 */
REG(PSC_SILVER_BULLET) = 0;
/* Power on required peripherals */
lpsc_on(DAVINCI_LPSC_EMAC);
lpsc_on(DAVINCI_LPSC_EMAC_WRAPPER);
lpsc_on(DAVINCI_LPSC_MDIO);
lpsc_on(DAVINCI_LPSC_I2C);
lpsc_on(DAVINCI_LPSC_UART0);
lpsc_on(DAVINCI_LPSC_TIMER1);
lpsc_on(DAVINCI_LPSC_GPIO);
/* Powerup the DSP */
dsp_on();
/* Bringup UART0 out of reset */
REG(UART0_PWREMU_MGMT) = 0x0000e003;
/* Enable GIO3.3V cells used for EMAC */
REG(VDD3P3V_PWDN) = 0;
/* Enable UART0 MUX lines */
REG(PINMUX1) |= 1;
/* Enable EMAC and AEMIF pins */
REG(PINMUX0) = 0x80000c1f;
/* Enable I2C pin Mux */
REG(PINMUX1) |= (1 << 7);
/* Set the Bus Priority Register to appropriate value */
REG(VBPR) = 0x20;
timer_init();
return(0);
}
int misc_init_r (void)
{
u_int8_t tmp[20], buf[10];
int i = 0;
int clk = 0;
clk = ((REG(PLL2_PLLM) + 1) * 27) / ((REG(PLL2_DIV2) & 0x1f) + 1);
printf ("ARM Clock : %dMHz\n", ((REG(PLL1_PLLM) + 1) * 27 ) / 2);
printf ("DDR Clock : %dMHz\n", (clk / 2));
/* Set Ethernet MAC address from EEPROM */
if (i2c_read(CFG_I2C_EEPROM_ADDR, 0x7f00, CFG_I2C_EEPROM_ADDR_LEN, buf, 6)) {
printf("\nEEPROM @ 0x%02x read FAILED!!!\n", CFG_I2C_EEPROM_ADDR);
} else {
tmp[0] = 0xff;
for (i = 0; i < 6; i++)
tmp[0] &= buf[i];
if ((tmp[0] != 0xff) && (getenv("ethaddr") == NULL)) {
sprintf((char *)&tmp[0], "%02x:%02x:%02x:%02x:%02x:%02x",
buf[0], buf[1], buf[2], buf[3], buf[4], buf[5]);
setenv("ethaddr", (char *)&tmp[0]);
}
}
if (!eth_hw_init()) {
printf("ethernet init failed!\n");
} else {
printf("ETH PHY : %s\n", phy.name);
}
return(0);
}
int dram_init(void)
{
gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
return(0);
}