u-boot/include/net/ncsi.h

/* SPDX-License-Identifier: GPL-2.0+ */
/*
 * NC-SI PHY
 *
 * Copyright (C) 2019, IBM Corporation.
 */

#include <phy.h>

bool ncsi_active(void);
void ncsi_receive(struct ethernet_hdr *et, struct ip_udp_hdr *ip,
		  unsigned int len);
void ncsi_probe_packages(void);
phy: Add support for the NC-SI protocol This introduces support for the NC-SI protocol, modelled as a phy driver for other ethernet drivers to consume. NC-SI (Network Controller Sideband Interface) is a protocol to manage a sideband connection to a proper network interface, for example a BMC (Baseboard Management Controller) sharing the NIC of the host system. Probing and configuration occurs by communicating with the "remote" NIC via NC-SI control frames (Ethernet header 0x88f8). This implementation is roughly based on the upstream Linux implementation[0], with a reduced feature set and an emphasis on getting a link up as fast as possible rather than probing the full possible topology of the bus. The current phy model relies on the network being "up", sending NC-SI command frames via net_send_packet() and receiving them from the net_loop() loop (added in a following patch). The ncsi-pkt.h header[1] is copied from the Linux kernel for consistent field definitions. [0]: https://github.com/torvalds/linux/tree/master/net/ncsi [1]: https://github.com/torvalds/linux/blob/master/net/ncsi/ncsi-pkt.h Signed-off-by: Samuel Mendoza-Jonas <sam@mendozajonas.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Acked-by: Joe Hershberger <joe.hershberger@ni.com> 2019-06-18 11:37:17 +10:00			`/* SPDX-License-Identifier: GPL-2.0+ */`
			`/*`
			`* NC-SI PHY`
			`*`
			`* Copyright (C) 2019, IBM Corporation.`
			`*/`

			`#include <phy.h>`

			`bool ncsi_active(void);`
			`void ncsi_receive(struct ethernet_hdr et, struct ip_udp_hdr ip,`
			`unsigned int len);`
			`void ncsi_probe_packages(void);`