Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-12-13 14:53:06 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/arch/arm/dts/k3-j721e-sk.dts

1075 lines
27 KiB
Text
Raw Normal View History

arm: dts: k3-j721e-sk: Add initial A72 specific dts support J721E Starter Kit (SK)[1] is a low cost, small form factor board designed for TI’s J721E SoC. TI’s J721E SoC comprises of dual core A72, high performance vision accelerators, video codec accelerators, latest C71x and C66x DSP, high bandwidth real-time IPs for capture and display, GPU, dedicated safety island and security accelerators. The SoC is power optimized to provide best in class performance for industrial and automotive applications. J721E SK supports the following interfaces: * 4 GB LPDDR4 RAM * x1 Gigabit Ethernet interface * x1 USB 3.0 Type-C port * x3 USB 3.0 Type-A ports * x1 PCIe M.2 E Key * x1 PCIe M.2 M Key * 512 Mbit OSPI flash * x2 CSI2 Camera interface (RPi and TI Camera connector) * 40-pin Raspberry Pi GPIO header Add A72 specific dts for J721E-SK. [1] https://www.ti.com/tool/SK-TDA4VM Signed-off-by: Sinthu Raja <sinthu.raja@ti.com>
2022-02-09 09:36:55 +00:00
// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (C) 2021 Texas Instruments Incorporated - https://www.ti.com/
arm: dts: k3-j721e: Sync with v6.6-rc1 Sync k3-j721e DTS with kernel.org v6.6-rc1. * Use mcu_timer0 defined in k3-j721e-mcu-wakeup.dtsi and remove timer0, we have its clocks set up in clk-data now * Remove hbmc node as support is buggy and needs to be fixed * Remove aliases and chosen node, use them from Kernel * Remove /delete-property/ and clock-frequency from sdhci, usbss, and mcu_uart nodes as we have them in clk and dev data * Remove dummy_clocks as they are not needed * Remove cpsw node as it is not required since it has been fixed in U-Boot * Remove pcie nodes, they are not needed * Remove mcu_i2c0 as it is used for tps659413 PMIC in j721e-sk for which support is not yet added * Change secproxy nodes to their Linux definitions * Remove overriding of ti,cluster-mode in MAIN R5 to default to lockstep mode same as Kernel * Retain tps6594 node as TPS6594 PMIC support is still under review in the Kernel [1], cleanup will be taken post its merge [1] https://lore.kernel.org/all/20230810-tps6594-v6-0-2b2e2399e2ef@ti.com/ Signed-off-by: Neha Malcom Francis <n-francis@ti.com> Reviewed-by: Manorit Chawdhry <m-chawdhry@ti.com>
2023-09-27 13:09:56 +00:00
*
* J721E SK URL: https://www.ti.com/tool/SK-TDA4VM
arm: dts: k3-j721e-sk: Add initial A72 specific dts support J721E Starter Kit (SK)[1] is a low cost, small form factor board designed for TI’s J721E SoC. TI’s J721E SoC comprises of dual core A72, high performance vision accelerators, video codec accelerators, latest C71x and C66x DSP, high bandwidth real-time IPs for capture and display, GPU, dedicated safety island and security accelerators. The SoC is power optimized to provide best in class performance for industrial and automotive applications. J721E SK supports the following interfaces: * 4 GB LPDDR4 RAM * x1 Gigabit Ethernet interface * x1 USB 3.0 Type-C port * x3 USB 3.0 Type-A ports * x1 PCIe M.2 E Key * x1 PCIe M.2 M Key * 512 Mbit OSPI flash * x2 CSI2 Camera interface (RPi and TI Camera connector) * 40-pin Raspberry Pi GPIO header Add A72 specific dts for J721E-SK. [1] https://www.ti.com/tool/SK-TDA4VM Signed-off-by: Sinthu Raja <sinthu.raja@ti.com>
2022-02-09 09:36:55 +00:00
*/
/dts-v1/;
#include "k3-j721e.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/net/ti-dp83867.h>
/ {
compatible = "ti,j721e-sk", "ti,j721e";
arm: dts: k3-j721e: Sync with v6.6-rc1 Sync k3-j721e DTS with kernel.org v6.6-rc1. * Use mcu_timer0 defined in k3-j721e-mcu-wakeup.dtsi and remove timer0, we have its clocks set up in clk-data now * Remove hbmc node as support is buggy and needs to be fixed * Remove aliases and chosen node, use them from Kernel * Remove /delete-property/ and clock-frequency from sdhci, usbss, and mcu_uart nodes as we have them in clk and dev data * Remove dummy_clocks as they are not needed * Remove cpsw node as it is not required since it has been fixed in U-Boot * Remove pcie nodes, they are not needed * Remove mcu_i2c0 as it is used for tps659413 PMIC in j721e-sk for which support is not yet added * Change secproxy nodes to their Linux definitions * Remove overriding of ti,cluster-mode in MAIN R5 to default to lockstep mode same as Kernel * Retain tps6594 node as TPS6594 PMIC support is still under review in the Kernel [1], cleanup will be taken post its merge [1] https://lore.kernel.org/all/20230810-tps6594-v6-0-2b2e2399e2ef@ti.com/ Signed-off-by: Neha Malcom Francis <n-francis@ti.com> Reviewed-by: Manorit Chawdhry <m-chawdhry@ti.com>
2023-09-27 13:09:56 +00:00
model = "Texas Instruments J721E SK";
aliases {
serial0 = &wkup_uart0;
serial1 = &mcu_uart0;
serial2 = &main_uart0;
serial3 = &main_uart1;
ethernet0 = &cpsw_port1;
mmc1 = &main_sdhci1;
};
arm: dts: k3-j721e-sk: Add initial A72 specific dts support J721E Starter Kit (SK)[1] is a low cost, small form factor board designed for TI’s J721E SoC. TI’s J721E SoC comprises of dual core A72, high performance vision accelerators, video codec accelerators, latest C71x and C66x DSP, high bandwidth real-time IPs for capture and display, GPU, dedicated safety island and security accelerators. The SoC is power optimized to provide best in class performance for industrial and automotive applications. J721E SK supports the following interfaces: * 4 GB LPDDR4 RAM * x1 Gigabit Ethernet interface * x1 USB 3.0 Type-C port * x3 USB 3.0 Type-A ports * x1 PCIe M.2 E Key * x1 PCIe M.2 M Key * 512 Mbit OSPI flash * x2 CSI2 Camera interface (RPi and TI Camera connector) * 40-pin Raspberry Pi GPIO header Add A72 specific dts for J721E-SK. [1] https://www.ti.com/tool/SK-TDA4VM Signed-off-by: Sinthu Raja <sinthu.raja@ti.com>
2022-02-09 09:36:55 +00:00
chosen {
stdout-path = "serial2:115200n8";
};
memory@80000000 {
device_type = "memory";
/* 4G RAM */
reg = <0x00000000 0x80000000 0x00000000 0x80000000>,
<0x00000008 0x80000000 0x00000000 0x80000000>;
};
reserved_memory: reserved-memory {
#address-cells = <2>;
#size-cells = <2>;
ranges;
secure_ddr: optee@9e800000 {
reg = <0x00 0x9e800000 0x00 0x01800000>;
alignment = <0x1000>;
no-map;
};
mcu_r5fss0_core0_dma_memory_region: r5f-dma-memory@a0000000 {
compatible = "shared-dma-pool";
reg = <0x00 0xa0000000 0x00 0x100000>;
no-map;
};
mcu_r5fss0_core0_memory_region: r5f-memory@a0100000 {
compatible = "shared-dma-pool";
reg = <0x00 0xa0100000 0x00 0xf00000>;
no-map;
};
mcu_r5fss0_core1_dma_memory_region: r5f-dma-memory@a1000000 {
compatible = "shared-dma-pool";
reg = <0x00 0xa1000000 0x00 0x100000>;
no-map;
};
mcu_r5fss0_core1_memory_region: r5f-memory@a1100000 {
compatible = "shared-dma-pool";
reg = <0x00 0xa1100000 0x00 0xf00000>;
no-map;
};
main_r5fss0_core0_dma_memory_region: r5f-dma-memory@a2000000 {
compatible = "shared-dma-pool";
reg = <0x00 0xa2000000 0x00 0x100000>;
no-map;
};
main_r5fss0_core0_memory_region: r5f-memory@a2100000 {
compatible = "shared-dma-pool";
reg = <0x00 0xa2100000 0x00 0xf00000>;
no-map;
};
main_r5fss0_core1_dma_memory_region: r5f-dma-memory@a3000000 {
compatible = "shared-dma-pool";
reg = <0x00 0xa3000000 0x00 0x100000>;
no-map;
};
main_r5fss0_core1_memory_region: r5f-memory@a3100000 {
compatible = "shared-dma-pool";
reg = <0x00 0xa3100000 0x00 0xf00000>;
no-map;
};
main_r5fss1_core0_dma_memory_region: r5f-dma-memory@a4000000 {
compatible = "shared-dma-pool";
reg = <0x00 0xa4000000 0x00 0x100000>;
no-map;
};
main_r5fss1_core0_memory_region: r5f-memory@a4100000 {
compatible = "shared-dma-pool";
reg = <0x00 0xa4100000 0x00 0xf00000>;
no-map;
};
main_r5fss1_core1_dma_memory_region: r5f-dma-memory@a5000000 {
compatible = "shared-dma-pool";
reg = <0x00 0xa5000000 0x00 0x100000>;
no-map;
};
main_r5fss1_core1_memory_region: r5f-memory@a5100000 {
compatible = "shared-dma-pool";
reg = <0x00 0xa5100000 0x00 0xf00000>;
no-map;
};
c66_1_dma_memory_region: c66-dma-memory@a6000000 {
compatible = "shared-dma-pool";
reg = <0x00 0xa6000000 0x00 0x100000>;
no-map;
};
c66_0_memory_region: c66-memory@a6100000 {
compatible = "shared-dma-pool";
reg = <0x00 0xa6100000 0x00 0xf00000>;
no-map;
};
c66_0_dma_memory_region: c66-dma-memory@a7000000 {
compatible = "shared-dma-pool";
reg = <0x00 0xa7000000 0x00 0x100000>;
no-map;
};
c66_1_memory_region: c66-memory@a7100000 {
compatible = "shared-dma-pool";
reg = <0x00 0xa7100000 0x00 0xf00000>;
no-map;
};
c71_0_dma_memory_region: c71-dma-memory@a8000000 {
compatible = "shared-dma-pool";
reg = <0x00 0xa8000000 0x00 0x100000>;
no-map;
};
c71_0_memory_region: c71-memory@a8100000 {
compatible = "shared-dma-pool";
reg = <0x00 0xa8100000 0x00 0xf00000>;
no-map;
};
rtos_ipc_memory_region: ipc-memories@aa000000 {
reg = <0x00 0xaa000000 0x00 0x01c00000>;
alignment = <0x1000>;
no-map;
};
};
vusb_main: fixedregulator-vusb-main5v0 {
/* USB MAIN INPUT 5V DC */
compatible = "regulator-fixed";
regulator-name = "vusb-main5v0";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-always-on;
regulator-boot-on;
};
vsys_3v3: fixedregulator-vsys3v3 {
/* Output of LM5141 */
compatible = "regulator-fixed";
regulator-name = "vsys_3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
vin-supply = <&vusb_main>;
regulator-always-on;
regulator-boot-on;
};
vdd_mmc1: fixedregulator-sd {
compatible = "regulator-fixed";
pinctrl-names = "default";
pinctrl-0 = <&vdd_mmc1_en_pins_default>;
regulator-name = "vdd_mmc1";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
enable-active-high;
vin-supply = <&vsys_3v3>;
gpio = <&wkup_gpio0 8 GPIO_ACTIVE_HIGH>;
};
vdd_sd_dv_alt: gpio-regulator-tps659411 {
compatible = "regulator-gpio";
pinctrl-names = "default";
pinctrl-0 = <&vdd_sd_dv_alt_pins_default>;
regulator-name = "tps659411";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
vin-supply = <&vsys_3v3>;
arm: dts: k3-j721e: Sync with v6.6-rc1 Sync k3-j721e DTS with kernel.org v6.6-rc1. * Use mcu_timer0 defined in k3-j721e-mcu-wakeup.dtsi and remove timer0, we have its clocks set up in clk-data now * Remove hbmc node as support is buggy and needs to be fixed * Remove aliases and chosen node, use them from Kernel * Remove /delete-property/ and clock-frequency from sdhci, usbss, and mcu_uart nodes as we have them in clk and dev data * Remove dummy_clocks as they are not needed * Remove cpsw node as it is not required since it has been fixed in U-Boot * Remove pcie nodes, they are not needed * Remove mcu_i2c0 as it is used for tps659413 PMIC in j721e-sk for which support is not yet added * Change secproxy nodes to their Linux definitions * Remove overriding of ti,cluster-mode in MAIN R5 to default to lockstep mode same as Kernel * Retain tps6594 node as TPS6594 PMIC support is still under review in the Kernel [1], cleanup will be taken post its merge [1] https://lore.kernel.org/all/20230810-tps6594-v6-0-2b2e2399e2ef@ti.com/ Signed-off-by: Neha Malcom Francis <n-francis@ti.com> Reviewed-by: Manorit Chawdhry <m-chawdhry@ti.com>
2023-09-27 13:09:56 +00:00
gpios = <&wkup_gpio0 9 GPIO_ACTIVE_HIGH>;
states = <1800000 0x0>,
<3300000 0x1>;
};
dp_pwr_3v3: fixedregulator-dp-prw {
compatible = "regulator-fixed";
regulator-name = "dp-pwr";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
pinctrl-names = "default";
pinctrl-0 = <&dp_pwr_en_pins_default>;
gpio = <&main_gpio0 111 0>; /* DP0_3V3 _EN */
enable-active-high;
};
dp0: connector {
compatible = "dp-connector";
label = "DP0";
type = "full-size";
dp-pwr-supply = <&dp_pwr_3v3>;
port {
dp_connector_in: endpoint {
remote-endpoint = <&dp0_out>;
};
};
};
hdmi-connector {
compatible = "hdmi-connector";
label = "hdmi";
type = "a";
pinctrl-names = "default";
pinctrl-0 = <&hdmi_hpd_pins_default>;
ddc-i2c-bus = <&main_i2c1>;
/* HDMI_HPD */
hpd-gpios = <&main_gpio1 0 GPIO_ACTIVE_HIGH>;
port {
hdmi_connector_in: endpoint {
remote-endpoint = <&tfp410_out>;
};
};
};
dvi-bridge {
compatible = "ti,tfp410";
pinctrl-names = "default";
pinctrl-0 = <&hdmi_pdn_pins_default>;
powerdown-gpios = <&main_gpio0 127 GPIO_ACTIVE_LOW>;
ti,deskew = <0>;
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
tfp410_in: endpoint {
remote-endpoint = <&dpi1_out>;
pclk-sample = <1>;
};
};
port@1 {
reg = <1>;
tfp410_out: endpoint {
remote-endpoint =
<&hdmi_connector_in>;
};
};
};
arm: dts: k3-j721e-sk: Add initial A72 specific dts support J721E Starter Kit (SK)[1] is a low cost, small form factor board designed for TI’s J721E SoC. TI’s J721E SoC comprises of dual core A72, high performance vision accelerators, video codec accelerators, latest C71x and C66x DSP, high bandwidth real-time IPs for capture and display, GPU, dedicated safety island and security accelerators. The SoC is power optimized to provide best in class performance for industrial and automotive applications. J721E SK supports the following interfaces: * 4 GB LPDDR4 RAM * x1 Gigabit Ethernet interface * x1 USB 3.0 Type-C port * x3 USB 3.0 Type-A ports * x1 PCIe M.2 E Key * x1 PCIe M.2 M Key * 512 Mbit OSPI flash * x2 CSI2 Camera interface (RPi and TI Camera connector) * 40-pin Raspberry Pi GPIO header Add A72 specific dts for J721E-SK. [1] https://www.ti.com/tool/SK-TDA4VM Signed-off-by: Sinthu Raja <sinthu.raja@ti.com>
2022-02-09 09:36:55 +00:00
};
};
&main_pmx0 {
arm: dts: k3-j721e: Sync with v6.6-rc1 Sync k3-j721e DTS with kernel.org v6.6-rc1. * Use mcu_timer0 defined in k3-j721e-mcu-wakeup.dtsi and remove timer0, we have its clocks set up in clk-data now * Remove hbmc node as support is buggy and needs to be fixed * Remove aliases and chosen node, use them from Kernel * Remove /delete-property/ and clock-frequency from sdhci, usbss, and mcu_uart nodes as we have them in clk and dev data * Remove dummy_clocks as they are not needed * Remove cpsw node as it is not required since it has been fixed in U-Boot * Remove pcie nodes, they are not needed * Remove mcu_i2c0 as it is used for tps659413 PMIC in j721e-sk for which support is not yet added * Change secproxy nodes to their Linux definitions * Remove overriding of ti,cluster-mode in MAIN R5 to default to lockstep mode same as Kernel * Retain tps6594 node as TPS6594 PMIC support is still under review in the Kernel [1], cleanup will be taken post its merge [1] https://lore.kernel.org/all/20230810-tps6594-v6-0-2b2e2399e2ef@ti.com/ Signed-off-by: Neha Malcom Francis <n-francis@ti.com> Reviewed-by: Manorit Chawdhry <m-chawdhry@ti.com>
2023-09-27 13:09:56 +00:00
main_mmc1_pins_default: main-mmc1-default-pins {
arm: dts: k3-j721e-sk: Add initial A72 specific dts support J721E Starter Kit (SK)[1] is a low cost, small form factor board designed for TI’s J721E SoC. TI’s J721E SoC comprises of dual core A72, high performance vision accelerators, video codec accelerators, latest C71x and C66x DSP, high bandwidth real-time IPs for capture and display, GPU, dedicated safety island and security accelerators. The SoC is power optimized to provide best in class performance for industrial and automotive applications. J721E SK supports the following interfaces: * 4 GB LPDDR4 RAM * x1 Gigabit Ethernet interface * x1 USB 3.0 Type-C port * x3 USB 3.0 Type-A ports * x1 PCIe M.2 E Key * x1 PCIe M.2 M Key * 512 Mbit OSPI flash * x2 CSI2 Camera interface (RPi and TI Camera connector) * 40-pin Raspberry Pi GPIO header Add A72 specific dts for J721E-SK. [1] https://www.ti.com/tool/SK-TDA4VM Signed-off-by: Sinthu Raja <sinthu.raja@ti.com>
2022-02-09 09:36:55 +00:00
pinctrl-single,pins = <
J721E_IOPAD(0x254, PIN_INPUT, 0) /* (R29) MMC1_CMD */
J721E_IOPAD(0x250, PIN_INPUT, 0) /* (P25) MMC1_CLK */
J721E_IOPAD(0x2ac, PIN_INPUT, 0) /* (P25) MMC1_CLKLB */
J721E_IOPAD(0x24c, PIN_INPUT, 0) /* (R24) MMC1_DAT0 */
J721E_IOPAD(0x248, PIN_INPUT, 0) /* (P24) MMC1_DAT1 */
J721E_IOPAD(0x244, PIN_INPUT, 0) /* (R25) MMC1_DAT2 */
J721E_IOPAD(0x240, PIN_INPUT, 0) /* (R26) MMC1_DAT3 */
J721E_IOPAD(0x258, PIN_INPUT, 0) /* (P23) MMC1_SDCD */
>;
};
arm: dts: k3-j721e: Sync with v6.6-rc1 Sync k3-j721e DTS with kernel.org v6.6-rc1. * Use mcu_timer0 defined in k3-j721e-mcu-wakeup.dtsi and remove timer0, we have its clocks set up in clk-data now * Remove hbmc node as support is buggy and needs to be fixed * Remove aliases and chosen node, use them from Kernel * Remove /delete-property/ and clock-frequency from sdhci, usbss, and mcu_uart nodes as we have them in clk and dev data * Remove dummy_clocks as they are not needed * Remove cpsw node as it is not required since it has been fixed in U-Boot * Remove pcie nodes, they are not needed * Remove mcu_i2c0 as it is used for tps659413 PMIC in j721e-sk for which support is not yet added * Change secproxy nodes to their Linux definitions * Remove overriding of ti,cluster-mode in MAIN R5 to default to lockstep mode same as Kernel * Retain tps6594 node as TPS6594 PMIC support is still under review in the Kernel [1], cleanup will be taken post its merge [1] https://lore.kernel.org/all/20230810-tps6594-v6-0-2b2e2399e2ef@ti.com/ Signed-off-by: Neha Malcom Francis <n-francis@ti.com> Reviewed-by: Manorit Chawdhry <m-chawdhry@ti.com>
2023-09-27 13:09:56 +00:00
main_uart0_pins_default: main-uart0-default-pins {
arm: dts: k3-j721e-sk: Add initial A72 specific dts support J721E Starter Kit (SK)[1] is a low cost, small form factor board designed for TI’s J721E SoC. TI’s J721E SoC comprises of dual core A72, high performance vision accelerators, video codec accelerators, latest C71x and C66x DSP, high bandwidth real-time IPs for capture and display, GPU, dedicated safety island and security accelerators. The SoC is power optimized to provide best in class performance for industrial and automotive applications. J721E SK supports the following interfaces: * 4 GB LPDDR4 RAM * x1 Gigabit Ethernet interface * x1 USB 3.0 Type-C port * x3 USB 3.0 Type-A ports * x1 PCIe M.2 E Key * x1 PCIe M.2 M Key * 512 Mbit OSPI flash * x2 CSI2 Camera interface (RPi and TI Camera connector) * 40-pin Raspberry Pi GPIO header Add A72 specific dts for J721E-SK. [1] https://www.ti.com/tool/SK-TDA4VM Signed-off-by: Sinthu Raja <sinthu.raja@ti.com>
2022-02-09 09:36:55 +00:00
pinctrl-single,pins = <
J721E_IOPAD(0x1f0, PIN_INPUT, 0) /* (AC2) UART0_CTSn */
J721E_IOPAD(0x1f4, PIN_OUTPUT, 0) /* (AB1) UART0_RTSn */
J721E_IOPAD(0x1e8, PIN_INPUT, 0) /* (AB2) UART0_RXD */
J721E_IOPAD(0x1ec, PIN_OUTPUT, 0) /* (AB3) UART0_TXD */
>;
};
arm: dts: k3-j721e: Sync with v6.6-rc1 Sync k3-j721e DTS with kernel.org v6.6-rc1. * Use mcu_timer0 defined in k3-j721e-mcu-wakeup.dtsi and remove timer0, we have its clocks set up in clk-data now * Remove hbmc node as support is buggy and needs to be fixed * Remove aliases and chosen node, use them from Kernel * Remove /delete-property/ and clock-frequency from sdhci, usbss, and mcu_uart nodes as we have them in clk and dev data * Remove dummy_clocks as they are not needed * Remove cpsw node as it is not required since it has been fixed in U-Boot * Remove pcie nodes, they are not needed * Remove mcu_i2c0 as it is used for tps659413 PMIC in j721e-sk for which support is not yet added * Change secproxy nodes to their Linux definitions * Remove overriding of ti,cluster-mode in MAIN R5 to default to lockstep mode same as Kernel * Retain tps6594 node as TPS6594 PMIC support is still under review in the Kernel [1], cleanup will be taken post its merge [1] https://lore.kernel.org/all/20230810-tps6594-v6-0-2b2e2399e2ef@ti.com/ Signed-off-by: Neha Malcom Francis <n-francis@ti.com> Reviewed-by: Manorit Chawdhry <m-chawdhry@ti.com>
2023-09-27 13:09:56 +00:00
main_uart1_pins_default: main-uart1-default-pins {
pinctrl-single,pins = <
J721E_IOPAD(0x1f8, PIN_INPUT, 0) /* (AA4) UART1_RXD */
J721E_IOPAD(0x1fc, PIN_OUTPUT, 0) /* (AB4) UART1_TXD */
>;
};
main_i2c0_pins_default: main-i2c0-default-pins {
arm: dts: k3-j721e-sk: Add initial A72 specific dts support J721E Starter Kit (SK)[1] is a low cost, small form factor board designed for TI’s J721E SoC. TI’s J721E SoC comprises of dual core A72, high performance vision accelerators, video codec accelerators, latest C71x and C66x DSP, high bandwidth real-time IPs for capture and display, GPU, dedicated safety island and security accelerators. The SoC is power optimized to provide best in class performance for industrial and automotive applications. J721E SK supports the following interfaces: * 4 GB LPDDR4 RAM * x1 Gigabit Ethernet interface * x1 USB 3.0 Type-C port * x3 USB 3.0 Type-A ports * x1 PCIe M.2 E Key * x1 PCIe M.2 M Key * 512 Mbit OSPI flash * x2 CSI2 Camera interface (RPi and TI Camera connector) * 40-pin Raspberry Pi GPIO header Add A72 specific dts for J721E-SK. [1] https://www.ti.com/tool/SK-TDA4VM Signed-off-by: Sinthu Raja <sinthu.raja@ti.com>
2022-02-09 09:36:55 +00:00
pinctrl-single,pins = <
J721E_IOPAD(0x220, PIN_INPUT_PULLUP, 0) /* (AC5) I2C0_SCL */
J721E_IOPAD(0x224, PIN_INPUT_PULLUP, 0) /* (AA5) I2C0_SDA */
>;
};
arm: dts: k3-j721e: Sync with v6.6-rc1 Sync k3-j721e DTS with kernel.org v6.6-rc1. * Use mcu_timer0 defined in k3-j721e-mcu-wakeup.dtsi and remove timer0, we have its clocks set up in clk-data now * Remove hbmc node as support is buggy and needs to be fixed * Remove aliases and chosen node, use them from Kernel * Remove /delete-property/ and clock-frequency from sdhci, usbss, and mcu_uart nodes as we have them in clk and dev data * Remove dummy_clocks as they are not needed * Remove cpsw node as it is not required since it has been fixed in U-Boot * Remove pcie nodes, they are not needed * Remove mcu_i2c0 as it is used for tps659413 PMIC in j721e-sk for which support is not yet added * Change secproxy nodes to their Linux definitions * Remove overriding of ti,cluster-mode in MAIN R5 to default to lockstep mode same as Kernel * Retain tps6594 node as TPS6594 PMIC support is still under review in the Kernel [1], cleanup will be taken post its merge [1] https://lore.kernel.org/all/20230810-tps6594-v6-0-2b2e2399e2ef@ti.com/ Signed-off-by: Neha Malcom Francis <n-francis@ti.com> Reviewed-by: Manorit Chawdhry <m-chawdhry@ti.com>
2023-09-27 13:09:56 +00:00
main_i2c1_pins_default: main-i2c1-default-pins {
arm: dts: k3-j721e-sk: Add initial A72 specific dts support J721E Starter Kit (SK)[1] is a low cost, small form factor board designed for TI’s J721E SoC. TI’s J721E SoC comprises of dual core A72, high performance vision accelerators, video codec accelerators, latest C71x and C66x DSP, high bandwidth real-time IPs for capture and display, GPU, dedicated safety island and security accelerators. The SoC is power optimized to provide best in class performance for industrial and automotive applications. J721E SK supports the following interfaces: * 4 GB LPDDR4 RAM * x1 Gigabit Ethernet interface * x1 USB 3.0 Type-C port * x3 USB 3.0 Type-A ports * x1 PCIe M.2 E Key * x1 PCIe M.2 M Key * 512 Mbit OSPI flash * x2 CSI2 Camera interface (RPi and TI Camera connector) * 40-pin Raspberry Pi GPIO header Add A72 specific dts for J721E-SK. [1] https://www.ti.com/tool/SK-TDA4VM Signed-off-by: Sinthu Raja <sinthu.raja@ti.com>
2022-02-09 09:36:55 +00:00
pinctrl-single,pins = <
J721E_IOPAD(0x228, PIN_INPUT_PULLUP, 0) /* (Y6) I2C1_SCL */
J721E_IOPAD(0x22c, PIN_INPUT_PULLUP, 0) /* (AA6) I2C1_SDA */
>;
};
arm: dts: k3-j721e: Sync with v6.6-rc1 Sync k3-j721e DTS with kernel.org v6.6-rc1. * Use mcu_timer0 defined in k3-j721e-mcu-wakeup.dtsi and remove timer0, we have its clocks set up in clk-data now * Remove hbmc node as support is buggy and needs to be fixed * Remove aliases and chosen node, use them from Kernel * Remove /delete-property/ and clock-frequency from sdhci, usbss, and mcu_uart nodes as we have them in clk and dev data * Remove dummy_clocks as they are not needed * Remove cpsw node as it is not required since it has been fixed in U-Boot * Remove pcie nodes, they are not needed * Remove mcu_i2c0 as it is used for tps659413 PMIC in j721e-sk for which support is not yet added * Change secproxy nodes to their Linux definitions * Remove overriding of ti,cluster-mode in MAIN R5 to default to lockstep mode same as Kernel * Retain tps6594 node as TPS6594 PMIC support is still under review in the Kernel [1], cleanup will be taken post its merge [1] https://lore.kernel.org/all/20230810-tps6594-v6-0-2b2e2399e2ef@ti.com/ Signed-off-by: Neha Malcom Francis <n-francis@ti.com> Reviewed-by: Manorit Chawdhry <m-chawdhry@ti.com>
2023-09-27 13:09:56 +00:00
main_i2c3_pins_default: main-i2c3-default-pins {
arm: dts: k3-j721e-sk: Add initial A72 specific dts support J721E Starter Kit (SK)[1] is a low cost, small form factor board designed for TI’s J721E SoC. TI’s J721E SoC comprises of dual core A72, high performance vision accelerators, video codec accelerators, latest C71x and C66x DSP, high bandwidth real-time IPs for capture and display, GPU, dedicated safety island and security accelerators. The SoC is power optimized to provide best in class performance for industrial and automotive applications. J721E SK supports the following interfaces: * 4 GB LPDDR4 RAM * x1 Gigabit Ethernet interface * x1 USB 3.0 Type-C port * x3 USB 3.0 Type-A ports * x1 PCIe M.2 E Key * x1 PCIe M.2 M Key * 512 Mbit OSPI flash * x2 CSI2 Camera interface (RPi and TI Camera connector) * 40-pin Raspberry Pi GPIO header Add A72 specific dts for J721E-SK. [1] https://www.ti.com/tool/SK-TDA4VM Signed-off-by: Sinthu Raja <sinthu.raja@ti.com>
2022-02-09 09:36:55 +00:00
pinctrl-single,pins = <
J721E_IOPAD(0x270, PIN_INPUT_PULLUP, 4) /* (T26) MMC2_CLK.I2C3_SCL */
J721E_IOPAD(0x274, PIN_INPUT_PULLUP, 4) /* (T25) MMC2_CMD.I2C3_SDA */
>;
};
arm: dts: k3-j721e: Sync with v6.6-rc1 Sync k3-j721e DTS with kernel.org v6.6-rc1. * Use mcu_timer0 defined in k3-j721e-mcu-wakeup.dtsi and remove timer0, we have its clocks set up in clk-data now * Remove hbmc node as support is buggy and needs to be fixed * Remove aliases and chosen node, use them from Kernel * Remove /delete-property/ and clock-frequency from sdhci, usbss, and mcu_uart nodes as we have them in clk and dev data * Remove dummy_clocks as they are not needed * Remove cpsw node as it is not required since it has been fixed in U-Boot * Remove pcie nodes, they are not needed * Remove mcu_i2c0 as it is used for tps659413 PMIC in j721e-sk for which support is not yet added * Change secproxy nodes to their Linux definitions * Remove overriding of ti,cluster-mode in MAIN R5 to default to lockstep mode same as Kernel * Retain tps6594 node as TPS6594 PMIC support is still under review in the Kernel [1], cleanup will be taken post its merge [1] https://lore.kernel.org/all/20230810-tps6594-v6-0-2b2e2399e2ef@ti.com/ Signed-off-by: Neha Malcom Francis <n-francis@ti.com> Reviewed-by: Manorit Chawdhry <m-chawdhry@ti.com>
2023-09-27 13:09:56 +00:00
main_usbss0_pins_default: main-usbss0-default-pins {
arm: dts: k3-j721e-sk: Add initial A72 specific dts support J721E Starter Kit (SK)[1] is a low cost, small form factor board designed for TI’s J721E SoC. TI’s J721E SoC comprises of dual core A72, high performance vision accelerators, video codec accelerators, latest C71x and C66x DSP, high bandwidth real-time IPs for capture and display, GPU, dedicated safety island and security accelerators. The SoC is power optimized to provide best in class performance for industrial and automotive applications. J721E SK supports the following interfaces: * 4 GB LPDDR4 RAM * x1 Gigabit Ethernet interface * x1 USB 3.0 Type-C port * x3 USB 3.0 Type-A ports * x1 PCIe M.2 E Key * x1 PCIe M.2 M Key * 512 Mbit OSPI flash * x2 CSI2 Camera interface (RPi and TI Camera connector) * 40-pin Raspberry Pi GPIO header Add A72 specific dts for J721E-SK. [1] https://www.ti.com/tool/SK-TDA4VM Signed-off-by: Sinthu Raja <sinthu.raja@ti.com>
2022-02-09 09:36:55 +00:00
pinctrl-single,pins = <
arm: dts: k3-j721e: Sync with v6.6-rc1 Sync k3-j721e DTS with kernel.org v6.6-rc1. * Use mcu_timer0 defined in k3-j721e-mcu-wakeup.dtsi and remove timer0, we have its clocks set up in clk-data now * Remove hbmc node as support is buggy and needs to be fixed * Remove aliases and chosen node, use them from Kernel * Remove /delete-property/ and clock-frequency from sdhci, usbss, and mcu_uart nodes as we have them in clk and dev data * Remove dummy_clocks as they are not needed * Remove cpsw node as it is not required since it has been fixed in U-Boot * Remove pcie nodes, they are not needed * Remove mcu_i2c0 as it is used for tps659413 PMIC in j721e-sk for which support is not yet added * Change secproxy nodes to their Linux definitions * Remove overriding of ti,cluster-mode in MAIN R5 to default to lockstep mode same as Kernel * Retain tps6594 node as TPS6594 PMIC support is still under review in the Kernel [1], cleanup will be taken post its merge [1] https://lore.kernel.org/all/20230810-tps6594-v6-0-2b2e2399e2ef@ti.com/ Signed-off-by: Neha Malcom Francis <n-francis@ti.com> Reviewed-by: Manorit Chawdhry <m-chawdhry@ti.com>
2023-09-27 13:09:56 +00:00
J721E_IOPAD(0x290, PIN_OUTPUT, 0) /* (U6) USB0_DRVVBUS */
J721E_IOPAD(0x210, PIN_INPUT, 7) /* (W3) MCAN1_RX.GPIO1_3 */
arm: dts: k3-j721e-sk: Add initial A72 specific dts support J721E Starter Kit (SK)[1] is a low cost, small form factor board designed for TI’s J721E SoC. TI’s J721E SoC comprises of dual core A72, high performance vision accelerators, video codec accelerators, latest C71x and C66x DSP, high bandwidth real-time IPs for capture and display, GPU, dedicated safety island and security accelerators. The SoC is power optimized to provide best in class performance for industrial and automotive applications. J721E SK supports the following interfaces: * 4 GB LPDDR4 RAM * x1 Gigabit Ethernet interface * x1 USB 3.0 Type-C port * x3 USB 3.0 Type-A ports * x1 PCIe M.2 E Key * x1 PCIe M.2 M Key * 512 Mbit OSPI flash * x2 CSI2 Camera interface (RPi and TI Camera connector) * 40-pin Raspberry Pi GPIO header Add A72 specific dts for J721E-SK. [1] https://www.ti.com/tool/SK-TDA4VM Signed-off-by: Sinthu Raja <sinthu.raja@ti.com>
2022-02-09 09:36:55 +00:00
>;
};
arm: dts: k3-j721e: Sync with v6.6-rc1 Sync k3-j721e DTS with kernel.org v6.6-rc1. * Use mcu_timer0 defined in k3-j721e-mcu-wakeup.dtsi and remove timer0, we have its clocks set up in clk-data now * Remove hbmc node as support is buggy and needs to be fixed * Remove aliases and chosen node, use them from Kernel * Remove /delete-property/ and clock-frequency from sdhci, usbss, and mcu_uart nodes as we have them in clk and dev data * Remove dummy_clocks as they are not needed * Remove cpsw node as it is not required since it has been fixed in U-Boot * Remove pcie nodes, they are not needed * Remove mcu_i2c0 as it is used for tps659413 PMIC in j721e-sk for which support is not yet added * Change secproxy nodes to their Linux definitions * Remove overriding of ti,cluster-mode in MAIN R5 to default to lockstep mode same as Kernel * Retain tps6594 node as TPS6594 PMIC support is still under review in the Kernel [1], cleanup will be taken post its merge [1] https://lore.kernel.org/all/20230810-tps6594-v6-0-2b2e2399e2ef@ti.com/ Signed-off-by: Neha Malcom Francis <n-francis@ti.com> Reviewed-by: Manorit Chawdhry <m-chawdhry@ti.com>
2023-09-27 13:09:56 +00:00
main_usbss1_pins_default: main-usbss1-default-pins {
arm: dts: k3-j721e-sk: Add initial A72 specific dts support J721E Starter Kit (SK)[1] is a low cost, small form factor board designed for TI’s J721E SoC. TI’s J721E SoC comprises of dual core A72, high performance vision accelerators, video codec accelerators, latest C71x and C66x DSP, high bandwidth real-time IPs for capture and display, GPU, dedicated safety island and security accelerators. The SoC is power optimized to provide best in class performance for industrial and automotive applications. J721E SK supports the following interfaces: * 4 GB LPDDR4 RAM * x1 Gigabit Ethernet interface * x1 USB 3.0 Type-C port * x3 USB 3.0 Type-A ports * x1 PCIe M.2 E Key * x1 PCIe M.2 M Key * 512 Mbit OSPI flash * x2 CSI2 Camera interface (RPi and TI Camera connector) * 40-pin Raspberry Pi GPIO header Add A72 specific dts for J721E-SK. [1] https://www.ti.com/tool/SK-TDA4VM Signed-off-by: Sinthu Raja <sinthu.raja@ti.com>
2022-02-09 09:36:55 +00:00
pinctrl-single,pins = <
arm: dts: k3-j721e: Sync with v6.6-rc1 Sync k3-j721e DTS with kernel.org v6.6-rc1. * Use mcu_timer0 defined in k3-j721e-mcu-wakeup.dtsi and remove timer0, we have its clocks set up in clk-data now * Remove hbmc node as support is buggy and needs to be fixed * Remove aliases and chosen node, use them from Kernel * Remove /delete-property/ and clock-frequency from sdhci, usbss, and mcu_uart nodes as we have them in clk and dev data * Remove dummy_clocks as they are not needed * Remove cpsw node as it is not required since it has been fixed in U-Boot * Remove pcie nodes, they are not needed * Remove mcu_i2c0 as it is used for tps659413 PMIC in j721e-sk for which support is not yet added * Change secproxy nodes to their Linux definitions * Remove overriding of ti,cluster-mode in MAIN R5 to default to lockstep mode same as Kernel * Retain tps6594 node as TPS6594 PMIC support is still under review in the Kernel [1], cleanup will be taken post its merge [1] https://lore.kernel.org/all/20230810-tps6594-v6-0-2b2e2399e2ef@ti.com/ Signed-off-by: Neha Malcom Francis <n-francis@ti.com> Reviewed-by: Manorit Chawdhry <m-chawdhry@ti.com>
2023-09-27 13:09:56 +00:00
J721E_IOPAD(0x214, PIN_OUTPUT, 4) /* (V4) MCAN1_TX.USB1_DRVVBUS */
arm: dts: k3-j721e-sk: Add initial A72 specific dts support J721E Starter Kit (SK)[1] is a low cost, small form factor board designed for TI’s J721E SoC. TI’s J721E SoC comprises of dual core A72, high performance vision accelerators, video codec accelerators, latest C71x and C66x DSP, high bandwidth real-time IPs for capture and display, GPU, dedicated safety island and security accelerators. The SoC is power optimized to provide best in class performance for industrial and automotive applications. J721E SK supports the following interfaces: * 4 GB LPDDR4 RAM * x1 Gigabit Ethernet interface * x1 USB 3.0 Type-C port * x3 USB 3.0 Type-A ports * x1 PCIe M.2 E Key * x1 PCIe M.2 M Key * 512 Mbit OSPI flash * x2 CSI2 Camera interface (RPi and TI Camera connector) * 40-pin Raspberry Pi GPIO header Add A72 specific dts for J721E-SK. [1] https://www.ti.com/tool/SK-TDA4VM Signed-off-by: Sinthu Raja <sinthu.raja@ti.com>
2022-02-09 09:36:55 +00:00
>;
};
arm: dts: k3-j721e: Sync with v6.6-rc1 Sync k3-j721e DTS with kernel.org v6.6-rc1. * Use mcu_timer0 defined in k3-j721e-mcu-wakeup.dtsi and remove timer0, we have its clocks set up in clk-data now * Remove hbmc node as support is buggy and needs to be fixed * Remove aliases and chosen node, use them from Kernel * Remove /delete-property/ and clock-frequency from sdhci, usbss, and mcu_uart nodes as we have them in clk and dev data * Remove dummy_clocks as they are not needed * Remove cpsw node as it is not required since it has been fixed in U-Boot * Remove pcie nodes, they are not needed * Remove mcu_i2c0 as it is used for tps659413 PMIC in j721e-sk for which support is not yet added * Change secproxy nodes to their Linux definitions * Remove overriding of ti,cluster-mode in MAIN R5 to default to lockstep mode same as Kernel * Retain tps6594 node as TPS6594 PMIC support is still under review in the Kernel [1], cleanup will be taken post its merge [1] https://lore.kernel.org/all/20230810-tps6594-v6-0-2b2e2399e2ef@ti.com/ Signed-off-by: Neha Malcom Francis <n-francis@ti.com> Reviewed-by: Manorit Chawdhry <m-chawdhry@ti.com>
2023-09-27 13:09:56 +00:00
dp0_pins_default: dp0-default-pins {
arm: dts: k3-j721e-sk: Add initial A72 specific dts support J721E Starter Kit (SK)[1] is a low cost, small form factor board designed for TI’s J721E SoC. TI’s J721E SoC comprises of dual core A72, high performance vision accelerators, video codec accelerators, latest C71x and C66x DSP, high bandwidth real-time IPs for capture and display, GPU, dedicated safety island and security accelerators. The SoC is power optimized to provide best in class performance for industrial and automotive applications. J721E SK supports the following interfaces: * 4 GB LPDDR4 RAM * x1 Gigabit Ethernet interface * x1 USB 3.0 Type-C port * x3 USB 3.0 Type-A ports * x1 PCIe M.2 E Key * x1 PCIe M.2 M Key * 512 Mbit OSPI flash * x2 CSI2 Camera interface (RPi and TI Camera connector) * 40-pin Raspberry Pi GPIO header Add A72 specific dts for J721E-SK. [1] https://www.ti.com/tool/SK-TDA4VM Signed-off-by: Sinthu Raja <sinthu.raja@ti.com>
2022-02-09 09:36:55 +00:00
pinctrl-single,pins = <
arm: dts: k3-j721e: Sync with v6.6-rc1 Sync k3-j721e DTS with kernel.org v6.6-rc1. * Use mcu_timer0 defined in k3-j721e-mcu-wakeup.dtsi and remove timer0, we have its clocks set up in clk-data now * Remove hbmc node as support is buggy and needs to be fixed * Remove aliases and chosen node, use them from Kernel * Remove /delete-property/ and clock-frequency from sdhci, usbss, and mcu_uart nodes as we have them in clk and dev data * Remove dummy_clocks as they are not needed * Remove cpsw node as it is not required since it has been fixed in U-Boot * Remove pcie nodes, they are not needed * Remove mcu_i2c0 as it is used for tps659413 PMIC in j721e-sk for which support is not yet added * Change secproxy nodes to their Linux definitions * Remove overriding of ti,cluster-mode in MAIN R5 to default to lockstep mode same as Kernel * Retain tps6594 node as TPS6594 PMIC support is still under review in the Kernel [1], cleanup will be taken post its merge [1] https://lore.kernel.org/all/20230810-tps6594-v6-0-2b2e2399e2ef@ti.com/ Signed-off-by: Neha Malcom Francis <n-francis@ti.com> Reviewed-by: Manorit Chawdhry <m-chawdhry@ti.com>
2023-09-27 13:09:56 +00:00
J721E_IOPAD(0x1c4, PIN_INPUT, 5) /* SPI0_CS1.DP0_HPD */
>;
};
dp_pwr_en_pins_default: dp-pwr-en-default-pins {
pinctrl-single,pins = <
J721E_IOPAD(0x1c0, PIN_INPUT, 7) /* (AA2) SPI0_CS0.GPIO0_111 */
>;
};
dss_vout0_pins_default: dss-vout0-default-pins {
pinctrl-single,pins = <
J721E_IOPAD(0x58, PIN_OUTPUT, 10) /* (AE22) PRG1_PRU1_GPO0.VOUT0_DATA0 */
J721E_IOPAD(0x5c, PIN_OUTPUT, 10) /* (AG23) PRG1_PRU1_GPO1.VOUT0_DATA1 */
J721E_IOPAD(0x60, PIN_OUTPUT, 10) /* (AF23) PRG1_PRU1_GPO2.VOUT0_DATA2 */
J721E_IOPAD(0x64, PIN_OUTPUT, 10) /* (AD23) PRG1_PRU1_GPO3.VOUT0_DATA3 */
J721E_IOPAD(0x68, PIN_OUTPUT, 10) /* (AH24) PRG1_PRU1_GPO4.VOUT0_DATA4 */
J721E_IOPAD(0x6c, PIN_OUTPUT, 10) /* (AG21) PRG1_PRU1_GPO5.VOUT0_DATA5 */
J721E_IOPAD(0x70, PIN_OUTPUT, 10) /* (AE23) PRG1_PRU1_GPO6.VOUT0_DATA6 */
J721E_IOPAD(0x74, PIN_OUTPUT, 10) /* (AC21) PRG1_PRU1_GPO7.VOUT0_DATA7 */
J721E_IOPAD(0x78, PIN_OUTPUT, 10) /* (Y23) PRG1_PRU1_GPO8.VOUT0_DATA8 */
J721E_IOPAD(0x7c, PIN_OUTPUT, 10) /* (AF21) PRG1_PRU1_GPO9.VOUT0_DATA9 */
J721E_IOPAD(0x80, PIN_OUTPUT, 10) /* (AB23) PRG1_PRU1_GPO10.VOUT0_DATA10 */
J721E_IOPAD(0x84, PIN_OUTPUT, 10) /* (AJ25) PRG1_PRU1_GPO11.VOUT0_DATA11 */
J721E_IOPAD(0x88, PIN_OUTPUT, 10) /* (AH25) PRG1_PRU1_GPO12.VOUT0_DATA12 */
J721E_IOPAD(0x8c, PIN_OUTPUT, 10) /* (AG25) PRG1_PRU1_GPO13.VOUT0_DATA13 */
J721E_IOPAD(0x90, PIN_OUTPUT, 10) /* (AH26) PRG1_PRU1_GPO14.VOUT0_DATA14 */
J721E_IOPAD(0x94, PIN_OUTPUT, 10) /* (AJ27) PRG1_PRU1_GPO15.VOUT0_DATA15 */
J721E_IOPAD(0x30, PIN_OUTPUT, 10) /* (AF24) PRG1_PRU0_GPO11.VOUT0_DATA16 */
J721E_IOPAD(0x34, PIN_OUTPUT, 10) /* (AJ24) PRG1_PRU0_GPO12.VOUT0_DATA17 */
J721E_IOPAD(0x38, PIN_OUTPUT, 10) /* (AG24) PRG1_PRU0_GPO13.VOUT0_DATA18 */
J721E_IOPAD(0x3c, PIN_OUTPUT, 10) /* (AD24) PRG1_PRU0_GPO14.VOUT0_DATA19 */
J721E_IOPAD(0x40, PIN_OUTPUT, 10) /* (AC24) PRG1_PRU0_GPO15.VOUT0_DATA20 */
J721E_IOPAD(0x44, PIN_OUTPUT, 10) /* (AE24) PRG1_PRU0_GPO16.VOUT0_DATA21 */
J721E_IOPAD(0x24, PIN_OUTPUT, 10) /* (AJ20) PRG1_PRU0_GPO8.VOUT0_DATA22 */
J721E_IOPAD(0x28, PIN_OUTPUT, 10) /* (AG20) PRG1_PRU0_GPO9.VOUT0_DATA23 */
J721E_IOPAD(0x9c, PIN_OUTPUT, 10) /* (AC22) PRG1_PRU1_GPO17.VOUT0_DE */
J721E_IOPAD(0x98, PIN_OUTPUT, 10) /* (AJ26) PRG1_PRU1_GPO16.VOUT0_HSYNC */
J721E_IOPAD(0xa4, PIN_OUTPUT, 10) /* (AH22) PRG1_PRU1_GPO19.VOUT0_PCLK */
J721E_IOPAD(0xa0, PIN_OUTPUT, 10) /* (AJ22) PRG1_PRU1_GPO18.VOUT0_VSYNC */
>;
};
hdmi_hpd_pins_default: hdmi-hpd-default-pins {
pinctrl-single,pins = <
J721E_IOPAD(0x204, PIN_INPUT, 7) /* (AD5) UART1_RTSn.GPIO1_0 */
>;
};
hdmi_pdn_pins_default: hdmi-pdn-default-pins {
pinctrl-single,pins = <
J721E_IOPAD(0x200, PIN_INPUT, 7) /* (AC4) UART1_CTSn.GPIO0_127 */
>;
};
/* Reset for M.2 E Key slot on PCIe0 */
ekey_reset_pins_default: ekey-reset-pns-default-pins {
pinctrl-single,pins = <
J721E_IOPAD(0x124, PIN_INPUT, 7) /* (Y24) PRG0_PRU1_GPO9.GPIO0_72 */
>;
};
main_i2c5_pins_default: main-i2c5-default-pins {
pinctrl-single,pins = <
J721E_IOPAD(0x150, PIN_INPUT_PULLUP, 2) /* (Y26) PRG0_MDIO0_MDIO.I2C5_SCL */
J721E_IOPAD(0x154, PIN_INPUT_PULLUP, 2) /* (AA27) PRG0_MDIO0_MDC.I2C5_SDA */
>;
};
rpi_header_gpio0_pins_default: rpi-header-gpio0-default-pins {
pinctrl-single,pins = <
J721E_IOPAD(0x01C, PIN_INPUT, 7) /* (AD22) PRG1_PRU0_GPO6.GPIO0_7 */
J721E_IOPAD(0x120, PIN_INPUT, 7) /* (AA28) PRG0_PRU1_GPO8.GPIO0_71 */
J721E_IOPAD(0x14C, PIN_INPUT, 7) /* (AA29) PRG0_PRU1_GPO19.GPIO0_82 */
J721E_IOPAD(0x02C, PIN_INPUT, 7) /* (AD21) PRG1_PRU0_GPO10.GPIO0_11 */
J721E_IOPAD(0x198, PIN_INPUT, 7) /* (V25) RGMII6_TD1.GPIO0_101 */
J721E_IOPAD(0x1B0, PIN_INPUT, 7) /* (W24) RGMII6_RD1.GPIO0_107 */
J721E_IOPAD(0x1A0, PIN_INPUT, 7) /* (W29) RGMII6_TXC.GPIO0_103 */
J721E_IOPAD(0x008, PIN_INPUT, 7) /* (AG22) PRG1_PRU0_GPO1.GPIO0_2 */
J721E_IOPAD(0x1D0, PIN_INPUT, 7) /* (AA3) SPI0_D1.GPIO0_115 */
J721E_IOPAD(0x11C, PIN_INPUT, 7) /* (AA24) PRG0_PRU1_GPO7.GPIO0_70 */
J721E_IOPAD(0x148, PIN_INPUT, 7) /* (AA26) PRG0_PRU1_GPO18.GPIO0_81 */
J721E_IOPAD(0x004, PIN_INPUT, 7) /* (AC23) PRG1_PRU0_GPO0.GPIO0_1 */
J721E_IOPAD(0x014, PIN_INPUT, 7) /* (AH23) PRG1_PRU0_GPO4.GPIO0_5 */
J721E_IOPAD(0x020, PIN_INPUT, 7) /* (AE20) PRG1_PRU0_GPO7.GPIO0_8 */
J721E_IOPAD(0x19C, PIN_INPUT, 7) /* (W27) RGMII6_TD0.GPIO0_102 */
J721E_IOPAD(0x1B4, PIN_INPUT, 7) /* (W25) RGMII6_RD0.GPIO0_108 */
J721E_IOPAD(0x188, PIN_INPUT, 7) /* (Y28) RGMII6_TX_CTL.GPIO0_97 */
J721E_IOPAD(0x00C, PIN_INPUT, 7) /* (AF22) PRG1_PRU0_GPO2.GPIO0_3 */
J721E_IOPAD(0x010, PIN_INPUT, 7) /* (AJ23) PRG1_PRU0_GPO3.GPIO0_4 */
J721E_IOPAD(0x178, PIN_INPUT, 7) /* (U27) RGMII5_RD3.GPIO0_93 */
J721E_IOPAD(0x17C, PIN_INPUT, 7) /* (U24) RGMII5_RD2.GPIO0_94 */
J721E_IOPAD(0x190, PIN_INPUT, 7) /* (W23) RGMII6_TD3.GPIO0_99 */
J721E_IOPAD(0x18C, PIN_INPUT, 7) /* (V23) RGMII6_RX_CTL.GPIO0_98 */
>;
};
rpi_header_gpio1_pins_default: rpi-header-gpio1-default-pins {
pinctrl-single,pins = <
J721E_IOPAD(0x234, PIN_INPUT, 7) /* (U3) EXT_REFCLK1.GPIO1_12 */
arm: dts: k3-j721e-sk: Add initial A72 specific dts support J721E Starter Kit (SK)[1] is a low cost, small form factor board designed for TI’s J721E SoC. TI’s J721E SoC comprises of dual core A72, high performance vision accelerators, video codec accelerators, latest C71x and C66x DSP, high bandwidth real-time IPs for capture and display, GPU, dedicated safety island and security accelerators. The SoC is power optimized to provide best in class performance for industrial and automotive applications. J721E SK supports the following interfaces: * 4 GB LPDDR4 RAM * x1 Gigabit Ethernet interface * x1 USB 3.0 Type-C port * x3 USB 3.0 Type-A ports * x1 PCIe M.2 E Key * x1 PCIe M.2 M Key * 512 Mbit OSPI flash * x2 CSI2 Camera interface (RPi and TI Camera connector) * 40-pin Raspberry Pi GPIO header Add A72 specific dts for J721E-SK. [1] https://www.ti.com/tool/SK-TDA4VM Signed-off-by: Sinthu Raja <sinthu.raja@ti.com>
2022-02-09 09:36:55 +00:00
>;
};
};
&wkup_pmx0 {
arm: dts: k3-j721e: Sync with v6.6-rc1 Sync k3-j721e DTS with kernel.org v6.6-rc1. * Use mcu_timer0 defined in k3-j721e-mcu-wakeup.dtsi and remove timer0, we have its clocks set up in clk-data now * Remove hbmc node as support is buggy and needs to be fixed * Remove aliases and chosen node, use them from Kernel * Remove /delete-property/ and clock-frequency from sdhci, usbss, and mcu_uart nodes as we have them in clk and dev data * Remove dummy_clocks as they are not needed * Remove cpsw node as it is not required since it has been fixed in U-Boot * Remove pcie nodes, they are not needed * Remove mcu_i2c0 as it is used for tps659413 PMIC in j721e-sk for which support is not yet added * Change secproxy nodes to their Linux definitions * Remove overriding of ti,cluster-mode in MAIN R5 to default to lockstep mode same as Kernel * Retain tps6594 node as TPS6594 PMIC support is still under review in the Kernel [1], cleanup will be taken post its merge [1] https://lore.kernel.org/all/20230810-tps6594-v6-0-2b2e2399e2ef@ti.com/ Signed-off-by: Neha Malcom Francis <n-francis@ti.com> Reviewed-by: Manorit Chawdhry <m-chawdhry@ti.com>
2023-09-27 13:09:56 +00:00
mcu_cpsw_pins_default: mcu-cpsw-default-pins {
arm: dts: k3-j721e-sk: Add initial A72 specific dts support J721E Starter Kit (SK)[1] is a low cost, small form factor board designed for TI’s J721E SoC. TI’s J721E SoC comprises of dual core A72, high performance vision accelerators, video codec accelerators, latest C71x and C66x DSP, high bandwidth real-time IPs for capture and display, GPU, dedicated safety island and security accelerators. The SoC is power optimized to provide best in class performance for industrial and automotive applications. J721E SK supports the following interfaces: * 4 GB LPDDR4 RAM * x1 Gigabit Ethernet interface * x1 USB 3.0 Type-C port * x3 USB 3.0 Type-A ports * x1 PCIe M.2 E Key * x1 PCIe M.2 M Key * 512 Mbit OSPI flash * x2 CSI2 Camera interface (RPi and TI Camera connector) * 40-pin Raspberry Pi GPIO header Add A72 specific dts for J721E-SK. [1] https://www.ti.com/tool/SK-TDA4VM Signed-off-by: Sinthu Raja <sinthu.raja@ti.com>
2022-02-09 09:36:55 +00:00
pinctrl-single,pins = <
J721E_WKUP_IOPAD(0x84, PIN_INPUT, 0) /* (B24) MCU_RGMII1_RD0 */
J721E_WKUP_IOPAD(0x80, PIN_INPUT, 0) /* (A24) MCU_RGMII1_RD1 */
J721E_WKUP_IOPAD(0x7c, PIN_INPUT, 0) /* (D24) MCU_RGMII1_RD2 */
J721E_WKUP_IOPAD(0x78, PIN_INPUT, 0) /* (A25) MCU_RGMII1_RD3 */
J721E_WKUP_IOPAD(0x74, PIN_INPUT, 0) /* (C24) MCU_RGMII1_RXC */
J721E_WKUP_IOPAD(0x5c, PIN_INPUT, 0) /* (C25) MCU_RGMII1_RX_CTL */
J721E_WKUP_IOPAD(0x6c, PIN_OUTPUT, 0) /* (B25) MCU_RGMII1_TD0 */
J721E_WKUP_IOPAD(0x68, PIN_OUTPUT, 0) /* (A26) MCU_RGMII1_TD1 */
J721E_WKUP_IOPAD(0x64, PIN_OUTPUT, 0) /* (A27) MCU_RGMII1_TD2 */
J721E_WKUP_IOPAD(0x60, PIN_OUTPUT, 0) /* (A28) MCU_RGMII1_TD3 */
J721E_WKUP_IOPAD(0x70, PIN_OUTPUT, 0) /* (B26) MCU_RGMII1_TXC */
J721E_WKUP_IOPAD(0x58, PIN_OUTPUT, 0) /* (B27) MCU_RGMII1_TX_CTL */
>;
};
arm: dts: k3-j721e: Sync with v6.6-rc1 Sync k3-j721e DTS with kernel.org v6.6-rc1. * Use mcu_timer0 defined in k3-j721e-mcu-wakeup.dtsi and remove timer0, we have its clocks set up in clk-data now * Remove hbmc node as support is buggy and needs to be fixed * Remove aliases and chosen node, use them from Kernel * Remove /delete-property/ and clock-frequency from sdhci, usbss, and mcu_uart nodes as we have them in clk and dev data * Remove dummy_clocks as they are not needed * Remove cpsw node as it is not required since it has been fixed in U-Boot * Remove pcie nodes, they are not needed * Remove mcu_i2c0 as it is used for tps659413 PMIC in j721e-sk for which support is not yet added * Change secproxy nodes to their Linux definitions * Remove overriding of ti,cluster-mode in MAIN R5 to default to lockstep mode same as Kernel * Retain tps6594 node as TPS6594 PMIC support is still under review in the Kernel [1], cleanup will be taken post its merge [1] https://lore.kernel.org/all/20230810-tps6594-v6-0-2b2e2399e2ef@ti.com/ Signed-off-by: Neha Malcom Francis <n-francis@ti.com> Reviewed-by: Manorit Chawdhry <m-chawdhry@ti.com>
2023-09-27 13:09:56 +00:00
mcu_mdio_pins_default: mcu-mdio1-default-pins {
arm: dts: k3-j721e-sk: Add initial A72 specific dts support J721E Starter Kit (SK)[1] is a low cost, small form factor board designed for TI’s J721E SoC. TI’s J721E SoC comprises of dual core A72, high performance vision accelerators, video codec accelerators, latest C71x and C66x DSP, high bandwidth real-time IPs for capture and display, GPU, dedicated safety island and security accelerators. The SoC is power optimized to provide best in class performance for industrial and automotive applications. J721E SK supports the following interfaces: * 4 GB LPDDR4 RAM * x1 Gigabit Ethernet interface * x1 USB 3.0 Type-C port * x3 USB 3.0 Type-A ports * x1 PCIe M.2 E Key * x1 PCIe M.2 M Key * 512 Mbit OSPI flash * x2 CSI2 Camera interface (RPi and TI Camera connector) * 40-pin Raspberry Pi GPIO header Add A72 specific dts for J721E-SK. [1] https://www.ti.com/tool/SK-TDA4VM Signed-off-by: Sinthu Raja <sinthu.raja@ti.com>
2022-02-09 09:36:55 +00:00
pinctrl-single,pins = <
J721E_WKUP_IOPAD(0x8c, PIN_OUTPUT, 0) /* (F23) MCU_MDIO0_MDC */
J721E_WKUP_IOPAD(0x88, PIN_INPUT, 0) /* (E23) MCU_MDIO0_MDIO */
>;
};
arm: dts: k3-j721e: Sync with v6.6-rc1 Sync k3-j721e DTS with kernel.org v6.6-rc1. * Use mcu_timer0 defined in k3-j721e-mcu-wakeup.dtsi and remove timer0, we have its clocks set up in clk-data now * Remove hbmc node as support is buggy and needs to be fixed * Remove aliases and chosen node, use them from Kernel * Remove /delete-property/ and clock-frequency from sdhci, usbss, and mcu_uart nodes as we have them in clk and dev data * Remove dummy_clocks as they are not needed * Remove cpsw node as it is not required since it has been fixed in U-Boot * Remove pcie nodes, they are not needed * Remove mcu_i2c0 as it is used for tps659413 PMIC in j721e-sk for which support is not yet added * Change secproxy nodes to their Linux definitions * Remove overriding of ti,cluster-mode in MAIN R5 to default to lockstep mode same as Kernel * Retain tps6594 node as TPS6594 PMIC support is still under review in the Kernel [1], cleanup will be taken post its merge [1] https://lore.kernel.org/all/20230810-tps6594-v6-0-2b2e2399e2ef@ti.com/ Signed-off-by: Neha Malcom Francis <n-francis@ti.com> Reviewed-by: Manorit Chawdhry <m-chawdhry@ti.com>
2023-09-27 13:09:56 +00:00
mcu_fss0_ospi0_pins_default: mcu-fss0-ospi0-default-pins {
arm: dts: k3-j721e-sk: Add initial A72 specific dts support J721E Starter Kit (SK)[1] is a low cost, small form factor board designed for TI’s J721E SoC. TI’s J721E SoC comprises of dual core A72, high performance vision accelerators, video codec accelerators, latest C71x and C66x DSP, high bandwidth real-time IPs for capture and display, GPU, dedicated safety island and security accelerators. The SoC is power optimized to provide best in class performance for industrial and automotive applications. J721E SK supports the following interfaces: * 4 GB LPDDR4 RAM * x1 Gigabit Ethernet interface * x1 USB 3.0 Type-C port * x3 USB 3.0 Type-A ports * x1 PCIe M.2 E Key * x1 PCIe M.2 M Key * 512 Mbit OSPI flash * x2 CSI2 Camera interface (RPi and TI Camera connector) * 40-pin Raspberry Pi GPIO header Add A72 specific dts for J721E-SK. [1] https://www.ti.com/tool/SK-TDA4VM Signed-off-by: Sinthu Raja <sinthu.raja@ti.com>
2022-02-09 09:36:55 +00:00
pinctrl-single,pins = <
J721E_WKUP_IOPAD(0x0, PIN_OUTPUT, 0) /* (E20) MCU_OSPI0_CLK */
J721E_WKUP_IOPAD(0x2c, PIN_OUTPUT, 0) /* (F19) MCU_OSPI0_CSn0 */
J721E_WKUP_IOPAD(0xc, PIN_INPUT, 0) /* (D20) MCU_OSPI0_D0 */
J721E_WKUP_IOPAD(0x10, PIN_INPUT, 0) /* (G19) MCU_OSPI0_D1 */
J721E_WKUP_IOPAD(0x14, PIN_INPUT, 0) /* (G20) MCU_OSPI0_D2 */
J721E_WKUP_IOPAD(0x18, PIN_INPUT, 0) /* (F20) MCU_OSPI0_D3 */
J721E_WKUP_IOPAD(0x1c, PIN_INPUT, 0) /* (F21) MCU_OSPI0_D4 */
J721E_WKUP_IOPAD(0x20, PIN_INPUT, 0) /* (E21) MCU_OSPI0_D5 */
J721E_WKUP_IOPAD(0x24, PIN_INPUT, 0) /* (B22) MCU_OSPI0_D6 */
J721E_WKUP_IOPAD(0x28, PIN_INPUT, 0) /* (G21) MCU_OSPI0_D7 */
J721E_WKUP_IOPAD(0x8, PIN_INPUT, 0) /* (D21) MCU_OSPI0_DQS */
>;
};
arm: dts: k3-j721e: Sync with v6.6-rc1 Sync k3-j721e DTS with kernel.org v6.6-rc1. * Use mcu_timer0 defined in k3-j721e-mcu-wakeup.dtsi and remove timer0, we have its clocks set up in clk-data now * Remove hbmc node as support is buggy and needs to be fixed * Remove aliases and chosen node, use them from Kernel * Remove /delete-property/ and clock-frequency from sdhci, usbss, and mcu_uart nodes as we have them in clk and dev data * Remove dummy_clocks as they are not needed * Remove cpsw node as it is not required since it has been fixed in U-Boot * Remove pcie nodes, they are not needed * Remove mcu_i2c0 as it is used for tps659413 PMIC in j721e-sk for which support is not yet added * Change secproxy nodes to their Linux definitions * Remove overriding of ti,cluster-mode in MAIN R5 to default to lockstep mode same as Kernel * Retain tps6594 node as TPS6594 PMIC support is still under review in the Kernel [1], cleanup will be taken post its merge [1] https://lore.kernel.org/all/20230810-tps6594-v6-0-2b2e2399e2ef@ti.com/ Signed-off-by: Neha Malcom Francis <n-francis@ti.com> Reviewed-by: Manorit Chawdhry <m-chawdhry@ti.com>
2023-09-27 13:09:56 +00:00
vdd_mmc1_en_pins_default: vdd-mmc1-en-default-pins {
arm: dts: k3-j721e-sk: Add initial A72 specific dts support J721E Starter Kit (SK)[1] is a low cost, small form factor board designed for TI’s J721E SoC. TI’s J721E SoC comprises of dual core A72, high performance vision accelerators, video codec accelerators, latest C71x and C66x DSP, high bandwidth real-time IPs for capture and display, GPU, dedicated safety island and security accelerators. The SoC is power optimized to provide best in class performance for industrial and automotive applications. J721E SK supports the following interfaces: * 4 GB LPDDR4 RAM * x1 Gigabit Ethernet interface * x1 USB 3.0 Type-C port * x3 USB 3.0 Type-A ports * x1 PCIe M.2 E Key * x1 PCIe M.2 M Key * 512 Mbit OSPI flash * x2 CSI2 Camera interface (RPi and TI Camera connector) * 40-pin Raspberry Pi GPIO header Add A72 specific dts for J721E-SK. [1] https://www.ti.com/tool/SK-TDA4VM Signed-off-by: Sinthu Raja <sinthu.raja@ti.com>
2022-02-09 09:36:55 +00:00
pinctrl-single,pins = <
J721E_WKUP_IOPAD(0xd0, PIN_OUTPUT, 7) /* (G27) WKUP_GPIO0_8 */
>;
};
arm: dts: k3-j721e: Sync with v6.6-rc1 Sync k3-j721e DTS with kernel.org v6.6-rc1. * Use mcu_timer0 defined in k3-j721e-mcu-wakeup.dtsi and remove timer0, we have its clocks set up in clk-data now * Remove hbmc node as support is buggy and needs to be fixed * Remove aliases and chosen node, use them from Kernel * Remove /delete-property/ and clock-frequency from sdhci, usbss, and mcu_uart nodes as we have them in clk and dev data * Remove dummy_clocks as they are not needed * Remove cpsw node as it is not required since it has been fixed in U-Boot * Remove pcie nodes, they are not needed * Remove mcu_i2c0 as it is used for tps659413 PMIC in j721e-sk for which support is not yet added * Change secproxy nodes to their Linux definitions * Remove overriding of ti,cluster-mode in MAIN R5 to default to lockstep mode same as Kernel * Retain tps6594 node as TPS6594 PMIC support is still under review in the Kernel [1], cleanup will be taken post its merge [1] https://lore.kernel.org/all/20230810-tps6594-v6-0-2b2e2399e2ef@ti.com/ Signed-off-by: Neha Malcom Francis <n-francis@ti.com> Reviewed-by: Manorit Chawdhry <m-chawdhry@ti.com>
2023-09-27 13:09:56 +00:00
vdd_sd_dv_alt_pins_default: vdd-sd-dv-alt-default-pins {
arm: dts: k3-j721e-sk: Add initial A72 specific dts support J721E Starter Kit (SK)[1] is a low cost, small form factor board designed for TI’s J721E SoC. TI’s J721E SoC comprises of dual core A72, high performance vision accelerators, video codec accelerators, latest C71x and C66x DSP, high bandwidth real-time IPs for capture and display, GPU, dedicated safety island and security accelerators. The SoC is power optimized to provide best in class performance for industrial and automotive applications. J721E SK supports the following interfaces: * 4 GB LPDDR4 RAM * x1 Gigabit Ethernet interface * x1 USB 3.0 Type-C port * x3 USB 3.0 Type-A ports * x1 PCIe M.2 E Key * x1 PCIe M.2 M Key * 512 Mbit OSPI flash * x2 CSI2 Camera interface (RPi and TI Camera connector) * 40-pin Raspberry Pi GPIO header Add A72 specific dts for J721E-SK. [1] https://www.ti.com/tool/SK-TDA4VM Signed-off-by: Sinthu Raja <sinthu.raja@ti.com>
2022-02-09 09:36:55 +00:00
pinctrl-single,pins = <
J721E_WKUP_IOPAD(0xd4, PIN_OUTPUT, 7) /* (G26) WKUP_GPIO0_9 */
>;
};
arm: dts: k3-j721e: Sync with v6.6-rc1 Sync k3-j721e DTS with kernel.org v6.6-rc1. * Use mcu_timer0 defined in k3-j721e-mcu-wakeup.dtsi and remove timer0, we have its clocks set up in clk-data now * Remove hbmc node as support is buggy and needs to be fixed * Remove aliases and chosen node, use them from Kernel * Remove /delete-property/ and clock-frequency from sdhci, usbss, and mcu_uart nodes as we have them in clk and dev data * Remove dummy_clocks as they are not needed * Remove cpsw node as it is not required since it has been fixed in U-Boot * Remove pcie nodes, they are not needed * Remove mcu_i2c0 as it is used for tps659413 PMIC in j721e-sk for which support is not yet added * Change secproxy nodes to their Linux definitions * Remove overriding of ti,cluster-mode in MAIN R5 to default to lockstep mode same as Kernel * Retain tps6594 node as TPS6594 PMIC support is still under review in the Kernel [1], cleanup will be taken post its merge [1] https://lore.kernel.org/all/20230810-tps6594-v6-0-2b2e2399e2ef@ti.com/ Signed-off-by: Neha Malcom Francis <n-francis@ti.com> Reviewed-by: Manorit Chawdhry <m-chawdhry@ti.com>
2023-09-27 13:09:56 +00:00
wkup_uart0_pins_default: wkup-uart0-default-pins {
pinctrl-single,pins = <
J721E_WKUP_IOPAD(0xa0, PIN_INPUT, 0) /* (J29) WKUP_UART0_RXD */
J721E_WKUP_IOPAD(0xa4, PIN_OUTPUT, 0) /* (J28) WKUP_UART0_TXD */
>;
};
mcu_uart0_pins_default: mcu-uart0-default-pins {
pinctrl-single,pins = <
J721E_WKUP_IOPAD(0xf0, PIN_INPUT, 2) /* (D26) MCU_I3C0_SCL.MCU_UART0_CTSn */
J721E_WKUP_IOPAD(0xf4, PIN_OUTPUT, 2)/* (D25) MCU_I3C0_SDA.MCU_UART0_RTSn */
J721E_WKUP_IOPAD(0xe4, PIN_INPUT, 0) /* (H28) WKUP_GPIO0_13.MCU_UART0_RXD */
J721E_WKUP_IOPAD(0xe0, PIN_OUTPUT, 0)/* (G29) WKUP_GPIO0_12.MCU_UART0_TXD */
>;
};
wkup_i2c0_pins_default: wkup-i2c0-default-pins {
arm: dts: k3-j721e-sk: Add initial A72 specific dts support J721E Starter Kit (SK)[1] is a low cost, small form factor board designed for TI’s J721E SoC. TI’s J721E SoC comprises of dual core A72, high performance vision accelerators, video codec accelerators, latest C71x and C66x DSP, high bandwidth real-time IPs for capture and display, GPU, dedicated safety island and security accelerators. The SoC is power optimized to provide best in class performance for industrial and automotive applications. J721E SK supports the following interfaces: * 4 GB LPDDR4 RAM * x1 Gigabit Ethernet interface * x1 USB 3.0 Type-C port * x3 USB 3.0 Type-A ports * x1 PCIe M.2 E Key * x1 PCIe M.2 M Key * 512 Mbit OSPI flash * x2 CSI2 Camera interface (RPi and TI Camera connector) * 40-pin Raspberry Pi GPIO header Add A72 specific dts for J721E-SK. [1] https://www.ti.com/tool/SK-TDA4VM Signed-off-by: Sinthu Raja <sinthu.raja@ti.com>
2022-02-09 09:36:55 +00:00
pinctrl-single,pins = <
J721E_WKUP_IOPAD(0xf8, PIN_INPUT_PULLUP, 0) /* (J25) WKUP_I2C0_SCL */
J721E_WKUP_IOPAD(0xfc, PIN_INPUT_PULLUP, 0) /* (H24) WKUP_I2C0_SDA */
>;
};
arm: dts: k3-j721e: Sync with v6.6-rc1 Sync k3-j721e DTS with kernel.org v6.6-rc1. * Use mcu_timer0 defined in k3-j721e-mcu-wakeup.dtsi and remove timer0, we have its clocks set up in clk-data now * Remove hbmc node as support is buggy and needs to be fixed * Remove aliases and chosen node, use them from Kernel * Remove /delete-property/ and clock-frequency from sdhci, usbss, and mcu_uart nodes as we have them in clk and dev data * Remove dummy_clocks as they are not needed * Remove cpsw node as it is not required since it has been fixed in U-Boot * Remove pcie nodes, they are not needed * Remove mcu_i2c0 as it is used for tps659413 PMIC in j721e-sk for which support is not yet added * Change secproxy nodes to their Linux definitions * Remove overriding of ti,cluster-mode in MAIN R5 to default to lockstep mode same as Kernel * Retain tps6594 node as TPS6594 PMIC support is still under review in the Kernel [1], cleanup will be taken post its merge [1] https://lore.kernel.org/all/20230810-tps6594-v6-0-2b2e2399e2ef@ti.com/ Signed-off-by: Neha Malcom Francis <n-francis@ti.com> Reviewed-by: Manorit Chawdhry <m-chawdhry@ti.com>
2023-09-27 13:09:56 +00:00
/* Reset for M.2 M Key slot on PCIe1 */
mkey_reset_pins_default: mkey-reset-pns-default-pins {
pinctrl-single,pins = <
J721E_WKUP_IOPAD(0xdc, PIN_INPUT, 7) /* (H27) WKUP_GPIO0_11 */
>;
};
arm: dts: k3-j721e-sk: Add initial A72 specific dts support J721E Starter Kit (SK)[1] is a low cost, small form factor board designed for TI’s J721E SoC. TI’s J721E SoC comprises of dual core A72, high performance vision accelerators, video codec accelerators, latest C71x and C66x DSP, high bandwidth real-time IPs for capture and display, GPU, dedicated safety island and security accelerators. The SoC is power optimized to provide best in class performance for industrial and automotive applications. J721E SK supports the following interfaces: * 4 GB LPDDR4 RAM * x1 Gigabit Ethernet interface * x1 USB 3.0 Type-C port * x3 USB 3.0 Type-A ports * x1 PCIe M.2 E Key * x1 PCIe M.2 M Key * 512 Mbit OSPI flash * x2 CSI2 Camera interface (RPi and TI Camera connector) * 40-pin Raspberry Pi GPIO header Add A72 specific dts for J721E-SK. [1] https://www.ti.com/tool/SK-TDA4VM Signed-off-by: Sinthu Raja <sinthu.raja@ti.com>
2022-02-09 09:36:55 +00:00
};
&wkup_uart0 {
/* Wakeup UART is used by System firmware */
status = "reserved";
pinctrl-names = "default";
arm: dts: k3-j721e: Sync with v6.6-rc1 Sync k3-j721e DTS with kernel.org v6.6-rc1. * Use mcu_timer0 defined in k3-j721e-mcu-wakeup.dtsi and remove timer0, we have its clocks set up in clk-data now * Remove hbmc node as support is buggy and needs to be fixed * Remove aliases and chosen node, use them from Kernel * Remove /delete-property/ and clock-frequency from sdhci, usbss, and mcu_uart nodes as we have them in clk and dev data * Remove dummy_clocks as they are not needed * Remove cpsw node as it is not required since it has been fixed in U-Boot * Remove pcie nodes, they are not needed * Remove mcu_i2c0 as it is used for tps659413 PMIC in j721e-sk for which support is not yet added * Change secproxy nodes to their Linux definitions * Remove overriding of ti,cluster-mode in MAIN R5 to default to lockstep mode same as Kernel * Retain tps6594 node as TPS6594 PMIC support is still under review in the Kernel [1], cleanup will be taken post its merge [1] https://lore.kernel.org/all/20230810-tps6594-v6-0-2b2e2399e2ef@ti.com/ Signed-off-by: Neha Malcom Francis <n-francis@ti.com> Reviewed-by: Manorit Chawdhry <m-chawdhry@ti.com>
2023-09-27 13:09:56 +00:00
pinctrl-0 = <&wkup_uart0_pins_default>;
arm: dts: k3-j721e-sk: Add initial A72 specific dts support J721E Starter Kit (SK)[1] is a low cost, small form factor board designed for TI’s J721E SoC. TI’s J721E SoC comprises of dual core A72, high performance vision accelerators, video codec accelerators, latest C71x and C66x DSP, high bandwidth real-time IPs for capture and display, GPU, dedicated safety island and security accelerators. The SoC is power optimized to provide best in class performance for industrial and automotive applications. J721E SK supports the following interfaces: * 4 GB LPDDR4 RAM * x1 Gigabit Ethernet interface * x1 USB 3.0 Type-C port * x3 USB 3.0 Type-A ports * x1 PCIe M.2 E Key * x1 PCIe M.2 M Key * 512 Mbit OSPI flash * x2 CSI2 Camera interface (RPi and TI Camera connector) * 40-pin Raspberry Pi GPIO header Add A72 specific dts for J721E-SK. [1] https://www.ti.com/tool/SK-TDA4VM Signed-off-by: Sinthu Raja <sinthu.raja@ti.com>
2022-02-09 09:36:55 +00:00
};
arm: dts: k3-j721e: Sync with v6.6-rc1 Sync k3-j721e DTS with kernel.org v6.6-rc1. * Use mcu_timer0 defined in k3-j721e-mcu-wakeup.dtsi and remove timer0, we have its clocks set up in clk-data now * Remove hbmc node as support is buggy and needs to be fixed * Remove aliases and chosen node, use them from Kernel * Remove /delete-property/ and clock-frequency from sdhci, usbss, and mcu_uart nodes as we have them in clk and dev data * Remove dummy_clocks as they are not needed * Remove cpsw node as it is not required since it has been fixed in U-Boot * Remove pcie nodes, they are not needed * Remove mcu_i2c0 as it is used for tps659413 PMIC in j721e-sk for which support is not yet added * Change secproxy nodes to their Linux definitions * Remove overriding of ti,cluster-mode in MAIN R5 to default to lockstep mode same as Kernel * Retain tps6594 node as TPS6594 PMIC support is still under review in the Kernel [1], cleanup will be taken post its merge [1] https://lore.kernel.org/all/20230810-tps6594-v6-0-2b2e2399e2ef@ti.com/ Signed-off-by: Neha Malcom Francis <n-francis@ti.com> Reviewed-by: Manorit Chawdhry <m-chawdhry@ti.com>
2023-09-27 13:09:56 +00:00
&wkup_i2c0 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&wkup_i2c0_pins_default>;
clock-frequency = <400000>;
arm: dts: k3-j721e-sk: Add initial A72 specific dts support J721E Starter Kit (SK)[1] is a low cost, small form factor board designed for TI’s J721E SoC. TI’s J721E SoC comprises of dual core A72, high performance vision accelerators, video codec accelerators, latest C71x and C66x DSP, high bandwidth real-time IPs for capture and display, GPU, dedicated safety island and security accelerators. The SoC is power optimized to provide best in class performance for industrial and automotive applications. J721E SK supports the following interfaces: * 4 GB LPDDR4 RAM * x1 Gigabit Ethernet interface * x1 USB 3.0 Type-C port * x3 USB 3.0 Type-A ports * x1 PCIe M.2 E Key * x1 PCIe M.2 M Key * 512 Mbit OSPI flash * x2 CSI2 Camera interface (RPi and TI Camera connector) * 40-pin Raspberry Pi GPIO header Add A72 specific dts for J721E-SK. [1] https://www.ti.com/tool/SK-TDA4VM Signed-off-by: Sinthu Raja <sinthu.raja@ti.com>
2022-02-09 09:36:55 +00:00
arm: dts: k3-j721e: Sync with v6.6-rc1 Sync k3-j721e DTS with kernel.org v6.6-rc1. * Use mcu_timer0 defined in k3-j721e-mcu-wakeup.dtsi and remove timer0, we have its clocks set up in clk-data now * Remove hbmc node as support is buggy and needs to be fixed * Remove aliases and chosen node, use them from Kernel * Remove /delete-property/ and clock-frequency from sdhci, usbss, and mcu_uart nodes as we have them in clk and dev data * Remove dummy_clocks as they are not needed * Remove cpsw node as it is not required since it has been fixed in U-Boot * Remove pcie nodes, they are not needed * Remove mcu_i2c0 as it is used for tps659413 PMIC in j721e-sk for which support is not yet added * Change secproxy nodes to their Linux definitions * Remove overriding of ti,cluster-mode in MAIN R5 to default to lockstep mode same as Kernel * Retain tps6594 node as TPS6594 PMIC support is still under review in the Kernel [1], cleanup will be taken post its merge [1] https://lore.kernel.org/all/20230810-tps6594-v6-0-2b2e2399e2ef@ti.com/ Signed-off-by: Neha Malcom Francis <n-francis@ti.com> Reviewed-by: Manorit Chawdhry <m-chawdhry@ti.com>
2023-09-27 13:09:56 +00:00
eeprom@51 {
/* AT24C512C-MAHM-T */
compatible = "atmel,24c512";
reg = <0x51>;
};
arm: dts: k3-j721e-sk: Add initial A72 specific dts support J721E Starter Kit (SK)[1] is a low cost, small form factor board designed for TI’s J721E SoC. TI’s J721E SoC comprises of dual core A72, high performance vision accelerators, video codec accelerators, latest C71x and C66x DSP, high bandwidth real-time IPs for capture and display, GPU, dedicated safety island and security accelerators. The SoC is power optimized to provide best in class performance for industrial and automotive applications. J721E SK supports the following interfaces: * 4 GB LPDDR4 RAM * x1 Gigabit Ethernet interface * x1 USB 3.0 Type-C port * x3 USB 3.0 Type-A ports * x1 PCIe M.2 E Key * x1 PCIe M.2 M Key * 512 Mbit OSPI flash * x2 CSI2 Camera interface (RPi and TI Camera connector) * 40-pin Raspberry Pi GPIO header Add A72 specific dts for J721E-SK. [1] https://www.ti.com/tool/SK-TDA4VM Signed-off-by: Sinthu Raja <sinthu.raja@ti.com>
2022-02-09 09:36:55 +00:00
};
arm: dts: k3-j721e: Sync with v6.6-rc1 Sync k3-j721e DTS with kernel.org v6.6-rc1. * Use mcu_timer0 defined in k3-j721e-mcu-wakeup.dtsi and remove timer0, we have its clocks set up in clk-data now * Remove hbmc node as support is buggy and needs to be fixed * Remove aliases and chosen node, use them from Kernel * Remove /delete-property/ and clock-frequency from sdhci, usbss, and mcu_uart nodes as we have them in clk and dev data * Remove dummy_clocks as they are not needed * Remove cpsw node as it is not required since it has been fixed in U-Boot * Remove pcie nodes, they are not needed * Remove mcu_i2c0 as it is used for tps659413 PMIC in j721e-sk for which support is not yet added * Change secproxy nodes to their Linux definitions * Remove overriding of ti,cluster-mode in MAIN R5 to default to lockstep mode same as Kernel * Retain tps6594 node as TPS6594 PMIC support is still under review in the Kernel [1], cleanup will be taken post its merge [1] https://lore.kernel.org/all/20230810-tps6594-v6-0-2b2e2399e2ef@ti.com/ Signed-off-by: Neha Malcom Francis <n-francis@ti.com> Reviewed-by: Manorit Chawdhry <m-chawdhry@ti.com>
2023-09-27 13:09:56 +00:00
&mcu_uart0 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&mcu_uart0_pins_default>;
arm: dts: k3-j721e-sk: Add initial A72 specific dts support J721E Starter Kit (SK)[1] is a low cost, small form factor board designed for TI’s J721E SoC. TI’s J721E SoC comprises of dual core A72, high performance vision accelerators, video codec accelerators, latest C71x and C66x DSP, high bandwidth real-time IPs for capture and display, GPU, dedicated safety island and security accelerators. The SoC is power optimized to provide best in class performance for industrial and automotive applications. J721E SK supports the following interfaces: * 4 GB LPDDR4 RAM * x1 Gigabit Ethernet interface * x1 USB 3.0 Type-C port * x3 USB 3.0 Type-A ports * x1 PCIe M.2 E Key * x1 PCIe M.2 M Key * 512 Mbit OSPI flash * x2 CSI2 Camera interface (RPi and TI Camera connector) * 40-pin Raspberry Pi GPIO header Add A72 specific dts for J721E-SK. [1] https://www.ti.com/tool/SK-TDA4VM Signed-off-by: Sinthu Raja <sinthu.raja@ti.com>
2022-02-09 09:36:55 +00:00
};
arm: dts: k3-j721e: Sync with v6.6-rc1 Sync k3-j721e DTS with kernel.org v6.6-rc1. * Use mcu_timer0 defined in k3-j721e-mcu-wakeup.dtsi and remove timer0, we have its clocks set up in clk-data now * Remove hbmc node as support is buggy and needs to be fixed * Remove aliases and chosen node, use them from Kernel * Remove /delete-property/ and clock-frequency from sdhci, usbss, and mcu_uart nodes as we have them in clk and dev data * Remove dummy_clocks as they are not needed * Remove cpsw node as it is not required since it has been fixed in U-Boot * Remove pcie nodes, they are not needed * Remove mcu_i2c0 as it is used for tps659413 PMIC in j721e-sk for which support is not yet added * Change secproxy nodes to their Linux definitions * Remove overriding of ti,cluster-mode in MAIN R5 to default to lockstep mode same as Kernel * Retain tps6594 node as TPS6594 PMIC support is still under review in the Kernel [1], cleanup will be taken post its merge [1] https://lore.kernel.org/all/20230810-tps6594-v6-0-2b2e2399e2ef@ti.com/ Signed-off-by: Neha Malcom Francis <n-francis@ti.com> Reviewed-by: Manorit Chawdhry <m-chawdhry@ti.com>
2023-09-27 13:09:56 +00:00
&main_uart0 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&main_uart0_pins_default>;
/* Shared with ATF on this platform */
power-domains = <&k3_pds 146 TI_SCI_PD_SHARED>;
arm: dts: k3-j721e-sk: Add initial A72 specific dts support J721E Starter Kit (SK)[1] is a low cost, small form factor board designed for TI’s J721E SoC. TI’s J721E SoC comprises of dual core A72, high performance vision accelerators, video codec accelerators, latest C71x and C66x DSP, high bandwidth real-time IPs for capture and display, GPU, dedicated safety island and security accelerators. The SoC is power optimized to provide best in class performance for industrial and automotive applications. J721E SK supports the following interfaces: * 4 GB LPDDR4 RAM * x1 Gigabit Ethernet interface * x1 USB 3.0 Type-C port * x3 USB 3.0 Type-A ports * x1 PCIe M.2 E Key * x1 PCIe M.2 M Key * 512 Mbit OSPI flash * x2 CSI2 Camera interface (RPi and TI Camera connector) * 40-pin Raspberry Pi GPIO header Add A72 specific dts for J721E-SK. [1] https://www.ti.com/tool/SK-TDA4VM Signed-off-by: Sinthu Raja <sinthu.raja@ti.com>
2022-02-09 09:36:55 +00:00
};
arm: dts: k3-j721e: Sync with v6.6-rc1 Sync k3-j721e DTS with kernel.org v6.6-rc1. * Use mcu_timer0 defined in k3-j721e-mcu-wakeup.dtsi and remove timer0, we have its clocks set up in clk-data now * Remove hbmc node as support is buggy and needs to be fixed * Remove aliases and chosen node, use them from Kernel * Remove /delete-property/ and clock-frequency from sdhci, usbss, and mcu_uart nodes as we have them in clk and dev data * Remove dummy_clocks as they are not needed * Remove cpsw node as it is not required since it has been fixed in U-Boot * Remove pcie nodes, they are not needed * Remove mcu_i2c0 as it is used for tps659413 PMIC in j721e-sk for which support is not yet added * Change secproxy nodes to their Linux definitions * Remove overriding of ti,cluster-mode in MAIN R5 to default to lockstep mode same as Kernel * Retain tps6594 node as TPS6594 PMIC support is still under review in the Kernel [1], cleanup will be taken post its merge [1] https://lore.kernel.org/all/20230810-tps6594-v6-0-2b2e2399e2ef@ti.com/ Signed-off-by: Neha Malcom Francis <n-francis@ti.com> Reviewed-by: Manorit Chawdhry <m-chawdhry@ti.com>
2023-09-27 13:09:56 +00:00
&main_uart1 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&main_uart1_pins_default>;
arm: dts: k3-j721e-sk: Add initial A72 specific dts support J721E Starter Kit (SK)[1] is a low cost, small form factor board designed for TI’s J721E SoC. TI’s J721E SoC comprises of dual core A72, high performance vision accelerators, video codec accelerators, latest C71x and C66x DSP, high bandwidth real-time IPs for capture and display, GPU, dedicated safety island and security accelerators. The SoC is power optimized to provide best in class performance for industrial and automotive applications. J721E SK supports the following interfaces: * 4 GB LPDDR4 RAM * x1 Gigabit Ethernet interface * x1 USB 3.0 Type-C port * x3 USB 3.0 Type-A ports * x1 PCIe M.2 E Key * x1 PCIe M.2 M Key * 512 Mbit OSPI flash * x2 CSI2 Camera interface (RPi and TI Camera connector) * 40-pin Raspberry Pi GPIO header Add A72 specific dts for J721E-SK. [1] https://www.ti.com/tool/SK-TDA4VM Signed-off-by: Sinthu Raja <sinthu.raja@ti.com>
2022-02-09 09:36:55 +00:00
};
&main_sdhci1 {
/* SD Card */
arm: dts: k3-j721e: Sync with v6.6-rc1 Sync k3-j721e DTS with kernel.org v6.6-rc1. * Use mcu_timer0 defined in k3-j721e-mcu-wakeup.dtsi and remove timer0, we have its clocks set up in clk-data now * Remove hbmc node as support is buggy and needs to be fixed * Remove aliases and chosen node, use them from Kernel * Remove /delete-property/ and clock-frequency from sdhci, usbss, and mcu_uart nodes as we have them in clk and dev data * Remove dummy_clocks as they are not needed * Remove cpsw node as it is not required since it has been fixed in U-Boot * Remove pcie nodes, they are not needed * Remove mcu_i2c0 as it is used for tps659413 PMIC in j721e-sk for which support is not yet added * Change secproxy nodes to their Linux definitions * Remove overriding of ti,cluster-mode in MAIN R5 to default to lockstep mode same as Kernel * Retain tps6594 node as TPS6594 PMIC support is still under review in the Kernel [1], cleanup will be taken post its merge [1] https://lore.kernel.org/all/20230810-tps6594-v6-0-2b2e2399e2ef@ti.com/ Signed-off-by: Neha Malcom Francis <n-francis@ti.com> Reviewed-by: Manorit Chawdhry <m-chawdhry@ti.com>
2023-09-27 13:09:56 +00:00
status = "okay";
arm: dts: k3-j721e-sk: Add initial A72 specific dts support J721E Starter Kit (SK)[1] is a low cost, small form factor board designed for TI’s J721E SoC. TI’s J721E SoC comprises of dual core A72, high performance vision accelerators, video codec accelerators, latest C71x and C66x DSP, high bandwidth real-time IPs for capture and display, GPU, dedicated safety island and security accelerators. The SoC is power optimized to provide best in class performance for industrial and automotive applications. J721E SK supports the following interfaces: * 4 GB LPDDR4 RAM * x1 Gigabit Ethernet interface * x1 USB 3.0 Type-C port * x3 USB 3.0 Type-A ports * x1 PCIe M.2 E Key * x1 PCIe M.2 M Key * 512 Mbit OSPI flash * x2 CSI2 Camera interface (RPi and TI Camera connector) * 40-pin Raspberry Pi GPIO header Add A72 specific dts for J721E-SK. [1] https://www.ti.com/tool/SK-TDA4VM Signed-off-by: Sinthu Raja <sinthu.raja@ti.com>
2022-02-09 09:36:55 +00:00
vmmc-supply = <&vdd_mmc1>;
vqmmc-supply = <&vdd_sd_dv_alt>;
pinctrl-names = "default";
pinctrl-0 = <&main_mmc1_pins_default>;
ti,driver-strength-ohm = <50>;
disable-wp;
};
&ospi0 {
arm: dts: k3-j721e: Sync with v6.6-rc1 Sync k3-j721e DTS with kernel.org v6.6-rc1. * Use mcu_timer0 defined in k3-j721e-mcu-wakeup.dtsi and remove timer0, we have its clocks set up in clk-data now * Remove hbmc node as support is buggy and needs to be fixed * Remove aliases and chosen node, use them from Kernel * Remove /delete-property/ and clock-frequency from sdhci, usbss, and mcu_uart nodes as we have them in clk and dev data * Remove dummy_clocks as they are not needed * Remove cpsw node as it is not required since it has been fixed in U-Boot * Remove pcie nodes, they are not needed * Remove mcu_i2c0 as it is used for tps659413 PMIC in j721e-sk for which support is not yet added * Change secproxy nodes to their Linux definitions * Remove overriding of ti,cluster-mode in MAIN R5 to default to lockstep mode same as Kernel * Retain tps6594 node as TPS6594 PMIC support is still under review in the Kernel [1], cleanup will be taken post its merge [1] https://lore.kernel.org/all/20230810-tps6594-v6-0-2b2e2399e2ef@ti.com/ Signed-off-by: Neha Malcom Francis <n-francis@ti.com> Reviewed-by: Manorit Chawdhry <m-chawdhry@ti.com>
2023-09-27 13:09:56 +00:00
status = "okay";
arm: dts: k3-j721e-sk: Add initial A72 specific dts support J721E Starter Kit (SK)[1] is a low cost, small form factor board designed for TI’s J721E SoC. TI’s J721E SoC comprises of dual core A72, high performance vision accelerators, video codec accelerators, latest C71x and C66x DSP, high bandwidth real-time IPs for capture and display, GPU, dedicated safety island and security accelerators. The SoC is power optimized to provide best in class performance for industrial and automotive applications. J721E SK supports the following interfaces: * 4 GB LPDDR4 RAM * x1 Gigabit Ethernet interface * x1 USB 3.0 Type-C port * x3 USB 3.0 Type-A ports * x1 PCIe M.2 E Key * x1 PCIe M.2 M Key * 512 Mbit OSPI flash * x2 CSI2 Camera interface (RPi and TI Camera connector) * 40-pin Raspberry Pi GPIO header Add A72 specific dts for J721E-SK. [1] https://www.ti.com/tool/SK-TDA4VM Signed-off-by: Sinthu Raja <sinthu.raja@ti.com>
2022-02-09 09:36:55 +00:00
pinctrl-names = "default";
pinctrl-0 = <&mcu_fss0_ospi0_pins_default>;
arm: dts: k3-j721e: Sync with v6.6-rc1 Sync k3-j721e DTS with kernel.org v6.6-rc1. * Use mcu_timer0 defined in k3-j721e-mcu-wakeup.dtsi and remove timer0, we have its clocks set up in clk-data now * Remove hbmc node as support is buggy and needs to be fixed * Remove aliases and chosen node, use them from Kernel * Remove /delete-property/ and clock-frequency from sdhci, usbss, and mcu_uart nodes as we have them in clk and dev data * Remove dummy_clocks as they are not needed * Remove cpsw node as it is not required since it has been fixed in U-Boot * Remove pcie nodes, they are not needed * Remove mcu_i2c0 as it is used for tps659413 PMIC in j721e-sk for which support is not yet added * Change secproxy nodes to their Linux definitions * Remove overriding of ti,cluster-mode in MAIN R5 to default to lockstep mode same as Kernel * Retain tps6594 node as TPS6594 PMIC support is still under review in the Kernel [1], cleanup will be taken post its merge [1] https://lore.kernel.org/all/20230810-tps6594-v6-0-2b2e2399e2ef@ti.com/ Signed-off-by: Neha Malcom Francis <n-francis@ti.com> Reviewed-by: Manorit Chawdhry <m-chawdhry@ti.com>
2023-09-27 13:09:56 +00:00
flash@0 {
arm: dts: k3-j721e-sk: Add initial A72 specific dts support J721E Starter Kit (SK)[1] is a low cost, small form factor board designed for TI’s J721E SoC. TI’s J721E SoC comprises of dual core A72, high performance vision accelerators, video codec accelerators, latest C71x and C66x DSP, high bandwidth real-time IPs for capture and display, GPU, dedicated safety island and security accelerators. The SoC is power optimized to provide best in class performance for industrial and automotive applications. J721E SK supports the following interfaces: * 4 GB LPDDR4 RAM * x1 Gigabit Ethernet interface * x1 USB 3.0 Type-C port * x3 USB 3.0 Type-A ports * x1 PCIe M.2 E Key * x1 PCIe M.2 M Key * 512 Mbit OSPI flash * x2 CSI2 Camera interface (RPi and TI Camera connector) * 40-pin Raspberry Pi GPIO header Add A72 specific dts for J721E-SK. [1] https://www.ti.com/tool/SK-TDA4VM Signed-off-by: Sinthu Raja <sinthu.raja@ti.com>
2022-02-09 09:36:55 +00:00
compatible = "jedec,spi-nor";
reg = <0x0>;
spi-tx-bus-width = <8>;
spi-rx-bus-width = <8>;
spi-max-frequency = <25000000>;
cdns,tshsl-ns = <60>;
cdns,tsd2d-ns = <60>;
cdns,tchsh-ns = <60>;
cdns,tslch-ns = <60>;
cdns,read-delay = <4>;
arm: dts: k3-j721e: Sync with v6.6-rc1 Sync k3-j721e DTS with kernel.org v6.6-rc1. * Use mcu_timer0 defined in k3-j721e-mcu-wakeup.dtsi and remove timer0, we have its clocks set up in clk-data now * Remove hbmc node as support is buggy and needs to be fixed * Remove aliases and chosen node, use them from Kernel * Remove /delete-property/ and clock-frequency from sdhci, usbss, and mcu_uart nodes as we have them in clk and dev data * Remove dummy_clocks as they are not needed * Remove cpsw node as it is not required since it has been fixed in U-Boot * Remove pcie nodes, they are not needed * Remove mcu_i2c0 as it is used for tps659413 PMIC in j721e-sk for which support is not yet added * Change secproxy nodes to their Linux definitions * Remove overriding of ti,cluster-mode in MAIN R5 to default to lockstep mode same as Kernel * Retain tps6594 node as TPS6594 PMIC support is still under review in the Kernel [1], cleanup will be taken post its merge [1] https://lore.kernel.org/all/20230810-tps6594-v6-0-2b2e2399e2ef@ti.com/ Signed-off-by: Neha Malcom Francis <n-francis@ti.com> Reviewed-by: Manorit Chawdhry <m-chawdhry@ti.com>
2023-09-27 13:09:56 +00:00
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "ospi.tiboot3";
reg = <0x0 0x80000>;
};
partition@80000 {
label = "ospi.tispl";
reg = <0x80000 0x200000>;
};
partition@280000 {
label = "ospi.u-boot";
reg = <0x280000 0x400000>;
};
partition@680000 {
label = "ospi.env";
reg = <0x680000 0x40000>;
};
partition@6c0000 {
label = "ospi.sysfw";
reg = <0x6c0000 0x100000>;
};
partition@7c0000 {
label = "ospi.env.backup";
reg = <0x7c0000 0x40000>;
};
partition@800000 {
label = "ospi.rootfs";
reg = <0x800000 0x37c0000>;
};
partition@3fc0000 {
label = "ospi.phypattern";
reg = <0x3fc0000 0x40000>;
};
};
};
arm: dts: k3-j721e-sk: Add initial A72 specific dts support J721E Starter Kit (SK)[1] is a low cost, small form factor board designed for TI’s J721E SoC. TI’s J721E SoC comprises of dual core A72, high performance vision accelerators, video codec accelerators, latest C71x and C66x DSP, high bandwidth real-time IPs for capture and display, GPU, dedicated safety island and security accelerators. The SoC is power optimized to provide best in class performance for industrial and automotive applications. J721E SK supports the following interfaces: * 4 GB LPDDR4 RAM * x1 Gigabit Ethernet interface * x1 USB 3.0 Type-C port * x3 USB 3.0 Type-A ports * x1 PCIe M.2 E Key * x1 PCIe M.2 M Key * 512 Mbit OSPI flash * x2 CSI2 Camera interface (RPi and TI Camera connector) * 40-pin Raspberry Pi GPIO header Add A72 specific dts for J721E-SK. [1] https://www.ti.com/tool/SK-TDA4VM Signed-off-by: Sinthu Raja <sinthu.raja@ti.com>
2022-02-09 09:36:55 +00:00
};
&main_i2c0 {
arm: dts: k3-j721e: Sync with v6.6-rc1 Sync k3-j721e DTS with kernel.org v6.6-rc1. * Use mcu_timer0 defined in k3-j721e-mcu-wakeup.dtsi and remove timer0, we have its clocks set up in clk-data now * Remove hbmc node as support is buggy and needs to be fixed * Remove aliases and chosen node, use them from Kernel * Remove /delete-property/ and clock-frequency from sdhci, usbss, and mcu_uart nodes as we have them in clk and dev data * Remove dummy_clocks as they are not needed * Remove cpsw node as it is not required since it has been fixed in U-Boot * Remove pcie nodes, they are not needed * Remove mcu_i2c0 as it is used for tps659413 PMIC in j721e-sk for which support is not yet added * Change secproxy nodes to their Linux definitions * Remove overriding of ti,cluster-mode in MAIN R5 to default to lockstep mode same as Kernel * Retain tps6594 node as TPS6594 PMIC support is still under review in the Kernel [1], cleanup will be taken post its merge [1] https://lore.kernel.org/all/20230810-tps6594-v6-0-2b2e2399e2ef@ti.com/ Signed-off-by: Neha Malcom Francis <n-francis@ti.com> Reviewed-by: Manorit Chawdhry <m-chawdhry@ti.com>
2023-09-27 13:09:56 +00:00
status = "okay";
arm: dts: k3-j721e-sk: Add initial A72 specific dts support J721E Starter Kit (SK)[1] is a low cost, small form factor board designed for TI’s J721E SoC. TI’s J721E SoC comprises of dual core A72, high performance vision accelerators, video codec accelerators, latest C71x and C66x DSP, high bandwidth real-time IPs for capture and display, GPU, dedicated safety island and security accelerators. The SoC is power optimized to provide best in class performance for industrial and automotive applications. J721E SK supports the following interfaces: * 4 GB LPDDR4 RAM * x1 Gigabit Ethernet interface * x1 USB 3.0 Type-C port * x3 USB 3.0 Type-A ports * x1 PCIe M.2 E Key * x1 PCIe M.2 M Key * 512 Mbit OSPI flash * x2 CSI2 Camera interface (RPi and TI Camera connector) * 40-pin Raspberry Pi GPIO header Add A72 specific dts for J721E-SK. [1] https://www.ti.com/tool/SK-TDA4VM Signed-off-by: Sinthu Raja <sinthu.raja@ti.com>
2022-02-09 09:36:55 +00:00
pinctrl-names = "default";
pinctrl-0 = <&main_i2c0_pins_default>;
clock-frequency = <400000>;
arm: dts: k3-j721e: Sync with v6.6-rc1 Sync k3-j721e DTS with kernel.org v6.6-rc1. * Use mcu_timer0 defined in k3-j721e-mcu-wakeup.dtsi and remove timer0, we have its clocks set up in clk-data now * Remove hbmc node as support is buggy and needs to be fixed * Remove aliases and chosen node, use them from Kernel * Remove /delete-property/ and clock-frequency from sdhci, usbss, and mcu_uart nodes as we have them in clk and dev data * Remove dummy_clocks as they are not needed * Remove cpsw node as it is not required since it has been fixed in U-Boot * Remove pcie nodes, they are not needed * Remove mcu_i2c0 as it is used for tps659413 PMIC in j721e-sk for which support is not yet added * Change secproxy nodes to their Linux definitions * Remove overriding of ti,cluster-mode in MAIN R5 to default to lockstep mode same as Kernel * Retain tps6594 node as TPS6594 PMIC support is still under review in the Kernel [1], cleanup will be taken post its merge [1] https://lore.kernel.org/all/20230810-tps6594-v6-0-2b2e2399e2ef@ti.com/ Signed-off-by: Neha Malcom Francis <n-francis@ti.com> Reviewed-by: Manorit Chawdhry <m-chawdhry@ti.com>
2023-09-27 13:09:56 +00:00
i2c-mux@71 {
compatible = "nxp,pca9543";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x71>;
/* PCIe1 M.2 M Key I2C */
i2c@0 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
};
/* PCIe0 M.2 E Key I2C */
i2c@1 {
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
};
};
arm: dts: k3-j721e-sk: Add initial A72 specific dts support J721E Starter Kit (SK)[1] is a low cost, small form factor board designed for TI’s J721E SoC. TI’s J721E SoC comprises of dual core A72, high performance vision accelerators, video codec accelerators, latest C71x and C66x DSP, high bandwidth real-time IPs for capture and display, GPU, dedicated safety island and security accelerators. The SoC is power optimized to provide best in class performance for industrial and automotive applications. J721E SK supports the following interfaces: * 4 GB LPDDR4 RAM * x1 Gigabit Ethernet interface * x1 USB 3.0 Type-C port * x3 USB 3.0 Type-A ports * x1 PCIe M.2 E Key * x1 PCIe M.2 M Key * 512 Mbit OSPI flash * x2 CSI2 Camera interface (RPi and TI Camera connector) * 40-pin Raspberry Pi GPIO header Add A72 specific dts for J721E-SK. [1] https://www.ti.com/tool/SK-TDA4VM Signed-off-by: Sinthu Raja <sinthu.raja@ti.com>
2022-02-09 09:36:55 +00:00
};
&main_i2c1 {
arm: dts: k3-j721e: Sync with v6.6-rc1 Sync k3-j721e DTS with kernel.org v6.6-rc1. * Use mcu_timer0 defined in k3-j721e-mcu-wakeup.dtsi and remove timer0, we have its clocks set up in clk-data now * Remove hbmc node as support is buggy and needs to be fixed * Remove aliases and chosen node, use them from Kernel * Remove /delete-property/ and clock-frequency from sdhci, usbss, and mcu_uart nodes as we have them in clk and dev data * Remove dummy_clocks as they are not needed * Remove cpsw node as it is not required since it has been fixed in U-Boot * Remove pcie nodes, they are not needed * Remove mcu_i2c0 as it is used for tps659413 PMIC in j721e-sk for which support is not yet added * Change secproxy nodes to their Linux definitions * Remove overriding of ti,cluster-mode in MAIN R5 to default to lockstep mode same as Kernel * Retain tps6594 node as TPS6594 PMIC support is still under review in the Kernel [1], cleanup will be taken post its merge [1] https://lore.kernel.org/all/20230810-tps6594-v6-0-2b2e2399e2ef@ti.com/ Signed-off-by: Neha Malcom Francis <n-francis@ti.com> Reviewed-by: Manorit Chawdhry <m-chawdhry@ti.com>
2023-09-27 13:09:56 +00:00
status = "okay";
arm: dts: k3-j721e-sk: Add initial A72 specific dts support J721E Starter Kit (SK)[1] is a low cost, small form factor board designed for TI’s J721E SoC. TI’s J721E SoC comprises of dual core A72, high performance vision accelerators, video codec accelerators, latest C71x and C66x DSP, high bandwidth real-time IPs for capture and display, GPU, dedicated safety island and security accelerators. The SoC is power optimized to provide best in class performance for industrial and automotive applications. J721E SK supports the following interfaces: * 4 GB LPDDR4 RAM * x1 Gigabit Ethernet interface * x1 USB 3.0 Type-C port * x3 USB 3.0 Type-A ports * x1 PCIe M.2 E Key * x1 PCIe M.2 M Key * 512 Mbit OSPI flash * x2 CSI2 Camera interface (RPi and TI Camera connector) * 40-pin Raspberry Pi GPIO header Add A72 specific dts for J721E-SK. [1] https://www.ti.com/tool/SK-TDA4VM Signed-off-by: Sinthu Raja <sinthu.raja@ti.com>
2022-02-09 09:36:55 +00:00
pinctrl-names = "default";
pinctrl-0 = <&main_i2c1_pins_default>;
arm: dts: k3-j721e: Sync with v6.6-rc1 Sync k3-j721e DTS with kernel.org v6.6-rc1. * Use mcu_timer0 defined in k3-j721e-mcu-wakeup.dtsi and remove timer0, we have its clocks set up in clk-data now * Remove hbmc node as support is buggy and needs to be fixed * Remove aliases and chosen node, use them from Kernel * Remove /delete-property/ and clock-frequency from sdhci, usbss, and mcu_uart nodes as we have them in clk and dev data * Remove dummy_clocks as they are not needed * Remove cpsw node as it is not required since it has been fixed in U-Boot * Remove pcie nodes, they are not needed * Remove mcu_i2c0 as it is used for tps659413 PMIC in j721e-sk for which support is not yet added * Change secproxy nodes to their Linux definitions * Remove overriding of ti,cluster-mode in MAIN R5 to default to lockstep mode same as Kernel * Retain tps6594 node as TPS6594 PMIC support is still under review in the Kernel [1], cleanup will be taken post its merge [1] https://lore.kernel.org/all/20230810-tps6594-v6-0-2b2e2399e2ef@ti.com/ Signed-off-by: Neha Malcom Francis <n-francis@ti.com> Reviewed-by: Manorit Chawdhry <m-chawdhry@ti.com>
2023-09-27 13:09:56 +00:00
/* i2c1 is used for DVI DDC, so we need to use 100kHz */
clock-frequency = <100000>;
arm: dts: k3-j721e-sk: Add initial A72 specific dts support J721E Starter Kit (SK)[1] is a low cost, small form factor board designed for TI’s J721E SoC. TI’s J721E SoC comprises of dual core A72, high performance vision accelerators, video codec accelerators, latest C71x and C66x DSP, high bandwidth real-time IPs for capture and display, GPU, dedicated safety island and security accelerators. The SoC is power optimized to provide best in class performance for industrial and automotive applications. J721E SK supports the following interfaces: * 4 GB LPDDR4 RAM * x1 Gigabit Ethernet interface * x1 USB 3.0 Type-C port * x3 USB 3.0 Type-A ports * x1 PCIe M.2 E Key * x1 PCIe M.2 M Key * 512 Mbit OSPI flash * x2 CSI2 Camera interface (RPi and TI Camera connector) * 40-pin Raspberry Pi GPIO header Add A72 specific dts for J721E-SK. [1] https://www.ti.com/tool/SK-TDA4VM Signed-off-by: Sinthu Raja <sinthu.raja@ti.com>
2022-02-09 09:36:55 +00:00
};
&main_i2c3 {
arm: dts: k3-j721e: Sync with v6.6-rc1 Sync k3-j721e DTS with kernel.org v6.6-rc1. * Use mcu_timer0 defined in k3-j721e-mcu-wakeup.dtsi and remove timer0, we have its clocks set up in clk-data now * Remove hbmc node as support is buggy and needs to be fixed * Remove aliases and chosen node, use them from Kernel * Remove /delete-property/ and clock-frequency from sdhci, usbss, and mcu_uart nodes as we have them in clk and dev data * Remove dummy_clocks as they are not needed * Remove cpsw node as it is not required since it has been fixed in U-Boot * Remove pcie nodes, they are not needed * Remove mcu_i2c0 as it is used for tps659413 PMIC in j721e-sk for which support is not yet added * Change secproxy nodes to their Linux definitions * Remove overriding of ti,cluster-mode in MAIN R5 to default to lockstep mode same as Kernel * Retain tps6594 node as TPS6594 PMIC support is still under review in the Kernel [1], cleanup will be taken post its merge [1] https://lore.kernel.org/all/20230810-tps6594-v6-0-2b2e2399e2ef@ti.com/ Signed-off-by: Neha Malcom Francis <n-francis@ti.com> Reviewed-by: Manorit Chawdhry <m-chawdhry@ti.com>
2023-09-27 13:09:56 +00:00
status = "okay";
arm: dts: k3-j721e-sk: Add initial A72 specific dts support J721E Starter Kit (SK)[1] is a low cost, small form factor board designed for TI’s J721E SoC. TI’s J721E SoC comprises of dual core A72, high performance vision accelerators, video codec accelerators, latest C71x and C66x DSP, high bandwidth real-time IPs for capture and display, GPU, dedicated safety island and security accelerators. The SoC is power optimized to provide best in class performance for industrial and automotive applications. J721E SK supports the following interfaces: * 4 GB LPDDR4 RAM * x1 Gigabit Ethernet interface * x1 USB 3.0 Type-C port * x3 USB 3.0 Type-A ports * x1 PCIe M.2 E Key * x1 PCIe M.2 M Key * 512 Mbit OSPI flash * x2 CSI2 Camera interface (RPi and TI Camera connector) * 40-pin Raspberry Pi GPIO header Add A72 specific dts for J721E-SK. [1] https://www.ti.com/tool/SK-TDA4VM Signed-off-by: Sinthu Raja <sinthu.raja@ti.com>
2022-02-09 09:36:55 +00:00
pinctrl-names = "default";
pinctrl-0 = <&main_i2c3_pins_default>;
clock-frequency = <400000>;
arm: dts: k3-j721e: Sync with v6.6-rc1 Sync k3-j721e DTS with kernel.org v6.6-rc1. * Use mcu_timer0 defined in k3-j721e-mcu-wakeup.dtsi and remove timer0, we have its clocks set up in clk-data now * Remove hbmc node as support is buggy and needs to be fixed * Remove aliases and chosen node, use them from Kernel * Remove /delete-property/ and clock-frequency from sdhci, usbss, and mcu_uart nodes as we have them in clk and dev data * Remove dummy_clocks as they are not needed * Remove cpsw node as it is not required since it has been fixed in U-Boot * Remove pcie nodes, they are not needed * Remove mcu_i2c0 as it is used for tps659413 PMIC in j721e-sk for which support is not yet added * Change secproxy nodes to their Linux definitions * Remove overriding of ti,cluster-mode in MAIN R5 to default to lockstep mode same as Kernel * Retain tps6594 node as TPS6594 PMIC support is still under review in the Kernel [1], cleanup will be taken post its merge [1] https://lore.kernel.org/all/20230810-tps6594-v6-0-2b2e2399e2ef@ti.com/ Signed-off-by: Neha Malcom Francis <n-francis@ti.com> Reviewed-by: Manorit Chawdhry <m-chawdhry@ti.com>
2023-09-27 13:09:56 +00:00
i2c-mux@70 {
compatible = "nxp,pca9543";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x70>;
/* CSI0 I2C */
i2c@0 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
};
/* CSI1 I2C */
i2c@1 {
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
};
};
arm: dts: k3-j721e-sk: Add initial A72 specific dts support J721E Starter Kit (SK)[1] is a low cost, small form factor board designed for TI’s J721E SoC. TI’s J721E SoC comprises of dual core A72, high performance vision accelerators, video codec accelerators, latest C71x and C66x DSP, high bandwidth real-time IPs for capture and display, GPU, dedicated safety island and security accelerators. The SoC is power optimized to provide best in class performance for industrial and automotive applications. J721E SK supports the following interfaces: * 4 GB LPDDR4 RAM * x1 Gigabit Ethernet interface * x1 USB 3.0 Type-C port * x3 USB 3.0 Type-A ports * x1 PCIe M.2 E Key * x1 PCIe M.2 M Key * 512 Mbit OSPI flash * x2 CSI2 Camera interface (RPi and TI Camera connector) * 40-pin Raspberry Pi GPIO header Add A72 specific dts for J721E-SK. [1] https://www.ti.com/tool/SK-TDA4VM Signed-off-by: Sinthu Raja <sinthu.raja@ti.com>
2022-02-09 09:36:55 +00:00
};
&main_i2c5 {
/* Brought out on RPi Header */
arm: dts: k3-j721e: Sync with v6.6-rc1 Sync k3-j721e DTS with kernel.org v6.6-rc1. * Use mcu_timer0 defined in k3-j721e-mcu-wakeup.dtsi and remove timer0, we have its clocks set up in clk-data now * Remove hbmc node as support is buggy and needs to be fixed * Remove aliases and chosen node, use them from Kernel * Remove /delete-property/ and clock-frequency from sdhci, usbss, and mcu_uart nodes as we have them in clk and dev data * Remove dummy_clocks as they are not needed * Remove cpsw node as it is not required since it has been fixed in U-Boot * Remove pcie nodes, they are not needed * Remove mcu_i2c0 as it is used for tps659413 PMIC in j721e-sk for which support is not yet added * Change secproxy nodes to their Linux definitions * Remove overriding of ti,cluster-mode in MAIN R5 to default to lockstep mode same as Kernel * Retain tps6594 node as TPS6594 PMIC support is still under review in the Kernel [1], cleanup will be taken post its merge [1] https://lore.kernel.org/all/20230810-tps6594-v6-0-2b2e2399e2ef@ti.com/ Signed-off-by: Neha Malcom Francis <n-francis@ti.com> Reviewed-by: Manorit Chawdhry <m-chawdhry@ti.com>
2023-09-27 13:09:56 +00:00
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&main_i2c5_pins_default>;
clock-frequency = <400000>;
arm: dts: k3-j721e-sk: Add initial A72 specific dts support J721E Starter Kit (SK)[1] is a low cost, small form factor board designed for TI’s J721E SoC. TI’s J721E SoC comprises of dual core A72, high performance vision accelerators, video codec accelerators, latest C71x and C66x DSP, high bandwidth real-time IPs for capture and display, GPU, dedicated safety island and security accelerators. The SoC is power optimized to provide best in class performance for industrial and automotive applications. J721E SK supports the following interfaces: * 4 GB LPDDR4 RAM * x1 Gigabit Ethernet interface * x1 USB 3.0 Type-C port * x3 USB 3.0 Type-A ports * x1 PCIe M.2 E Key * x1 PCIe M.2 M Key * 512 Mbit OSPI flash * x2 CSI2 Camera interface (RPi and TI Camera connector) * 40-pin Raspberry Pi GPIO header Add A72 specific dts for J721E-SK. [1] https://www.ti.com/tool/SK-TDA4VM Signed-off-by: Sinthu Raja <sinthu.raja@ti.com>
2022-02-09 09:36:55 +00:00
};
arm: dts: k3-j721e: Sync with v6.6-rc1 Sync k3-j721e DTS with kernel.org v6.6-rc1. * Use mcu_timer0 defined in k3-j721e-mcu-wakeup.dtsi and remove timer0, we have its clocks set up in clk-data now * Remove hbmc node as support is buggy and needs to be fixed * Remove aliases and chosen node, use them from Kernel * Remove /delete-property/ and clock-frequency from sdhci, usbss, and mcu_uart nodes as we have them in clk and dev data * Remove dummy_clocks as they are not needed * Remove cpsw node as it is not required since it has been fixed in U-Boot * Remove pcie nodes, they are not needed * Remove mcu_i2c0 as it is used for tps659413 PMIC in j721e-sk for which support is not yet added * Change secproxy nodes to their Linux definitions * Remove overriding of ti,cluster-mode in MAIN R5 to default to lockstep mode same as Kernel * Retain tps6594 node as TPS6594 PMIC support is still under review in the Kernel [1], cleanup will be taken post its merge [1] https://lore.kernel.org/all/20230810-tps6594-v6-0-2b2e2399e2ef@ti.com/ Signed-off-by: Neha Malcom Francis <n-francis@ti.com> Reviewed-by: Manorit Chawdhry <m-chawdhry@ti.com>
2023-09-27 13:09:56 +00:00
&main_gpio0 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&rpi_header_gpio0_pins_default>;
arm: dts: k3-j721e-sk: Add initial A72 specific dts support J721E Starter Kit (SK)[1] is a low cost, small form factor board designed for TI’s J721E SoC. TI’s J721E SoC comprises of dual core A72, high performance vision accelerators, video codec accelerators, latest C71x and C66x DSP, high bandwidth real-time IPs for capture and display, GPU, dedicated safety island and security accelerators. The SoC is power optimized to provide best in class performance for industrial and automotive applications. J721E SK supports the following interfaces: * 4 GB LPDDR4 RAM * x1 Gigabit Ethernet interface * x1 USB 3.0 Type-C port * x3 USB 3.0 Type-A ports * x1 PCIe M.2 E Key * x1 PCIe M.2 M Key * 512 Mbit OSPI flash * x2 CSI2 Camera interface (RPi and TI Camera connector) * 40-pin Raspberry Pi GPIO header Add A72 specific dts for J721E-SK. [1] https://www.ti.com/tool/SK-TDA4VM Signed-off-by: Sinthu Raja <sinthu.raja@ti.com>
2022-02-09 09:36:55 +00:00
};
arm: dts: k3-j721e: Sync with v6.6-rc1 Sync k3-j721e DTS with kernel.org v6.6-rc1. * Use mcu_timer0 defined in k3-j721e-mcu-wakeup.dtsi and remove timer0, we have its clocks set up in clk-data now * Remove hbmc node as support is buggy and needs to be fixed * Remove aliases and chosen node, use them from Kernel * Remove /delete-property/ and clock-frequency from sdhci, usbss, and mcu_uart nodes as we have them in clk and dev data * Remove dummy_clocks as they are not needed * Remove cpsw node as it is not required since it has been fixed in U-Boot * Remove pcie nodes, they are not needed * Remove mcu_i2c0 as it is used for tps659413 PMIC in j721e-sk for which support is not yet added * Change secproxy nodes to their Linux definitions * Remove overriding of ti,cluster-mode in MAIN R5 to default to lockstep mode same as Kernel * Retain tps6594 node as TPS6594 PMIC support is still under review in the Kernel [1], cleanup will be taken post its merge [1] https://lore.kernel.org/all/20230810-tps6594-v6-0-2b2e2399e2ef@ti.com/ Signed-off-by: Neha Malcom Francis <n-francis@ti.com> Reviewed-by: Manorit Chawdhry <m-chawdhry@ti.com>
2023-09-27 13:09:56 +00:00
&main_gpio1 {
status = "okay";
arm: dts: k3-j721e-sk: Add initial A72 specific dts support J721E Starter Kit (SK)[1] is a low cost, small form factor board designed for TI’s J721E SoC. TI’s J721E SoC comprises of dual core A72, high performance vision accelerators, video codec accelerators, latest C71x and C66x DSP, high bandwidth real-time IPs for capture and display, GPU, dedicated safety island and security accelerators. The SoC is power optimized to provide best in class performance for industrial and automotive applications. J721E SK supports the following interfaces: * 4 GB LPDDR4 RAM * x1 Gigabit Ethernet interface * x1 USB 3.0 Type-C port * x3 USB 3.0 Type-A ports * x1 PCIe M.2 E Key * x1 PCIe M.2 M Key * 512 Mbit OSPI flash * x2 CSI2 Camera interface (RPi and TI Camera connector) * 40-pin Raspberry Pi GPIO header Add A72 specific dts for J721E-SK. [1] https://www.ti.com/tool/SK-TDA4VM Signed-off-by: Sinthu Raja <sinthu.raja@ti.com>
2022-02-09 09:36:55 +00:00
pinctrl-names = "default";
arm: dts: k3-j721e: Sync with v6.6-rc1 Sync k3-j721e DTS with kernel.org v6.6-rc1. * Use mcu_timer0 defined in k3-j721e-mcu-wakeup.dtsi and remove timer0, we have its clocks set up in clk-data now * Remove hbmc node as support is buggy and needs to be fixed * Remove aliases and chosen node, use them from Kernel * Remove /delete-property/ and clock-frequency from sdhci, usbss, and mcu_uart nodes as we have them in clk and dev data * Remove dummy_clocks as they are not needed * Remove cpsw node as it is not required since it has been fixed in U-Boot * Remove pcie nodes, they are not needed * Remove mcu_i2c0 as it is used for tps659413 PMIC in j721e-sk for which support is not yet added * Change secproxy nodes to their Linux definitions * Remove overriding of ti,cluster-mode in MAIN R5 to default to lockstep mode same as Kernel * Retain tps6594 node as TPS6594 PMIC support is still under review in the Kernel [1], cleanup will be taken post its merge [1] https://lore.kernel.org/all/20230810-tps6594-v6-0-2b2e2399e2ef@ti.com/ Signed-off-by: Neha Malcom Francis <n-francis@ti.com> Reviewed-by: Manorit Chawdhry <m-chawdhry@ti.com>
2023-09-27 13:09:56 +00:00
pinctrl-0 = <&rpi_header_gpio1_pins_default>;
};
&wkup_gpio0 {
status = "okay";
arm: dts: k3-j721e-sk: Add initial A72 specific dts support J721E Starter Kit (SK)[1] is a low cost, small form factor board designed for TI’s J721E SoC. TI’s J721E SoC comprises of dual core A72, high performance vision accelerators, video codec accelerators, latest C71x and C66x DSP, high bandwidth real-time IPs for capture and display, GPU, dedicated safety island and security accelerators. The SoC is power optimized to provide best in class performance for industrial and automotive applications. J721E SK supports the following interfaces: * 4 GB LPDDR4 RAM * x1 Gigabit Ethernet interface * x1 USB 3.0 Type-C port * x3 USB 3.0 Type-A ports * x1 PCIe M.2 E Key * x1 PCIe M.2 M Key * 512 Mbit OSPI flash * x2 CSI2 Camera interface (RPi and TI Camera connector) * 40-pin Raspberry Pi GPIO header Add A72 specific dts for J721E-SK. [1] https://www.ti.com/tool/SK-TDA4VM Signed-off-by: Sinthu Raja <sinthu.raja@ti.com>
2022-02-09 09:36:55 +00:00
};
&usb_serdes_mux {
idle-states = <1>, <1>; /* USB0 to SERDES3, USB1 to SERDES2 */
};
&serdes_ln_ctrl {
idle-states = <J721E_SERDES0_LANE0_PCIE0_LANE0>, <J721E_SERDES0_LANE1_IP4_UNUSED>,
<J721E_SERDES1_LANE0_PCIE1_LANE0>, <J721E_SERDES1_LANE1_PCIE1_LANE1>,
<J721E_SERDES2_LANE0_IP1_UNUSED>, <J721E_SERDES2_LANE1_USB3_1>,
<J721E_SERDES3_LANE0_USB3_0_SWAP>, <J721E_SERDES3_LANE1_USB3_0>,
<J721E_SERDES4_LANE0_EDP_LANE0>, <J721E_SERDES4_LANE1_EDP_LANE1>,
<J721E_SERDES4_LANE2_EDP_LANE2>, <J721E_SERDES4_LANE3_EDP_LANE3>;
};
&serdes_wiz3 {
typec-dir-gpios = <&main_gpio1 3 GPIO_ACTIVE_HIGH>;
typec-dir-debounce-ms = <700>; /* TUSB321, tCCB_DEFAULT 133 ms */
};
&serdes3 {
arm: dts: k3-j721e: Sync with v6.6-rc1 Sync k3-j721e DTS with kernel.org v6.6-rc1. * Use mcu_timer0 defined in k3-j721e-mcu-wakeup.dtsi and remove timer0, we have its clocks set up in clk-data now * Remove hbmc node as support is buggy and needs to be fixed * Remove aliases and chosen node, use them from Kernel * Remove /delete-property/ and clock-frequency from sdhci, usbss, and mcu_uart nodes as we have them in clk and dev data * Remove dummy_clocks as they are not needed * Remove cpsw node as it is not required since it has been fixed in U-Boot * Remove pcie nodes, they are not needed * Remove mcu_i2c0 as it is used for tps659413 PMIC in j721e-sk for which support is not yet added * Change secproxy nodes to their Linux definitions * Remove overriding of ti,cluster-mode in MAIN R5 to default to lockstep mode same as Kernel * Retain tps6594 node as TPS6594 PMIC support is still under review in the Kernel [1], cleanup will be taken post its merge [1] https://lore.kernel.org/all/20230810-tps6594-v6-0-2b2e2399e2ef@ti.com/ Signed-off-by: Neha Malcom Francis <n-francis@ti.com> Reviewed-by: Manorit Chawdhry <m-chawdhry@ti.com>
2023-09-27 13:09:56 +00:00
serdes3_usb_link: phy@0 {
arm: dts: k3-j721e-sk: Add initial A72 specific dts support J721E Starter Kit (SK)[1] is a low cost, small form factor board designed for TI’s J721E SoC. TI’s J721E SoC comprises of dual core A72, high performance vision accelerators, video codec accelerators, latest C71x and C66x DSP, high bandwidth real-time IPs for capture and display, GPU, dedicated safety island and security accelerators. The SoC is power optimized to provide best in class performance for industrial and automotive applications. J721E SK supports the following interfaces: * 4 GB LPDDR4 RAM * x1 Gigabit Ethernet interface * x1 USB 3.0 Type-C port * x3 USB 3.0 Type-A ports * x1 PCIe M.2 E Key * x1 PCIe M.2 M Key * 512 Mbit OSPI flash * x2 CSI2 Camera interface (RPi and TI Camera connector) * 40-pin Raspberry Pi GPIO header Add A72 specific dts for J721E-SK. [1] https://www.ti.com/tool/SK-TDA4VM Signed-off-by: Sinthu Raja <sinthu.raja@ti.com>
2022-02-09 09:36:55 +00:00
reg = <0>;
cdns,num-lanes = <2>;
#phy-cells = <0>;
cdns,phy-type = <PHY_TYPE_USB3>;
resets = <&serdes_wiz3 1>, <&serdes_wiz3 2>;
};
};
arm: dts: k3-j721e: Sync with v6.6-rc1 Sync k3-j721e DTS with kernel.org v6.6-rc1. * Use mcu_timer0 defined in k3-j721e-mcu-wakeup.dtsi and remove timer0, we have its clocks set up in clk-data now * Remove hbmc node as support is buggy and needs to be fixed * Remove aliases and chosen node, use them from Kernel * Remove /delete-property/ and clock-frequency from sdhci, usbss, and mcu_uart nodes as we have them in clk and dev data * Remove dummy_clocks as they are not needed * Remove cpsw node as it is not required since it has been fixed in U-Boot * Remove pcie nodes, they are not needed * Remove mcu_i2c0 as it is used for tps659413 PMIC in j721e-sk for which support is not yet added * Change secproxy nodes to their Linux definitions * Remove overriding of ti,cluster-mode in MAIN R5 to default to lockstep mode same as Kernel * Retain tps6594 node as TPS6594 PMIC support is still under review in the Kernel [1], cleanup will be taken post its merge [1] https://lore.kernel.org/all/20230810-tps6594-v6-0-2b2e2399e2ef@ti.com/ Signed-off-by: Neha Malcom Francis <n-francis@ti.com> Reviewed-by: Manorit Chawdhry <m-chawdhry@ti.com>
2023-09-27 13:09:56 +00:00
&serdes4 {
torrent_phy_dp: phy@0 {
reg = <0>;
resets = <&serdes_wiz4 1>;
cdns,phy-type = <PHY_TYPE_DP>;
cdns,num-lanes = <4>;
cdns,max-bit-rate = <5400>;
#phy-cells = <0>;
};
};
&mhdp {
phys = <&torrent_phy_dp>;
phy-names = "dpphy";
pinctrl-names = "default";
pinctrl-0 = <&dp0_pins_default>;
};
arm: dts: k3-j721e-sk: Add initial A72 specific dts support J721E Starter Kit (SK)[1] is a low cost, small form factor board designed for TI’s J721E SoC. TI’s J721E SoC comprises of dual core A72, high performance vision accelerators, video codec accelerators, latest C71x and C66x DSP, high bandwidth real-time IPs for capture and display, GPU, dedicated safety island and security accelerators. The SoC is power optimized to provide best in class performance for industrial and automotive applications. J721E SK supports the following interfaces: * 4 GB LPDDR4 RAM * x1 Gigabit Ethernet interface * x1 USB 3.0 Type-C port * x3 USB 3.0 Type-A ports * x1 PCIe M.2 E Key * x1 PCIe M.2 M Key * 512 Mbit OSPI flash * x2 CSI2 Camera interface (RPi and TI Camera connector) * 40-pin Raspberry Pi GPIO header Add A72 specific dts for J721E-SK. [1] https://www.ti.com/tool/SK-TDA4VM Signed-off-by: Sinthu Raja <sinthu.raja@ti.com>
2022-02-09 09:36:55 +00:00
&usbss0 {
pinctrl-names = "default";
pinctrl-0 = <&main_usbss0_pins_default>;
ti,vbus-divider;
};
&usb0 {
dr_mode = "otg";
maximum-speed = "super-speed";
phys = <&serdes3_usb_link>;
phy-names = "cdns3,usb3-phy";
};
&serdes2 {
arm: dts: k3-j721e: Sync with v6.6-rc1 Sync k3-j721e DTS with kernel.org v6.6-rc1. * Use mcu_timer0 defined in k3-j721e-mcu-wakeup.dtsi and remove timer0, we have its clocks set up in clk-data now * Remove hbmc node as support is buggy and needs to be fixed * Remove aliases and chosen node, use them from Kernel * Remove /delete-property/ and clock-frequency from sdhci, usbss, and mcu_uart nodes as we have them in clk and dev data * Remove dummy_clocks as they are not needed * Remove cpsw node as it is not required since it has been fixed in U-Boot * Remove pcie nodes, they are not needed * Remove mcu_i2c0 as it is used for tps659413 PMIC in j721e-sk for which support is not yet added * Change secproxy nodes to their Linux definitions * Remove overriding of ti,cluster-mode in MAIN R5 to default to lockstep mode same as Kernel * Retain tps6594 node as TPS6594 PMIC support is still under review in the Kernel [1], cleanup will be taken post its merge [1] https://lore.kernel.org/all/20230810-tps6594-v6-0-2b2e2399e2ef@ti.com/ Signed-off-by: Neha Malcom Francis <n-francis@ti.com> Reviewed-by: Manorit Chawdhry <m-chawdhry@ti.com>
2023-09-27 13:09:56 +00:00
serdes2_usb_link: phy@1 {
arm: dts: k3-j721e-sk: Add initial A72 specific dts support J721E Starter Kit (SK)[1] is a low cost, small form factor board designed for TI’s J721E SoC. TI’s J721E SoC comprises of dual core A72, high performance vision accelerators, video codec accelerators, latest C71x and C66x DSP, high bandwidth real-time IPs for capture and display, GPU, dedicated safety island and security accelerators. The SoC is power optimized to provide best in class performance for industrial and automotive applications. J721E SK supports the following interfaces: * 4 GB LPDDR4 RAM * x1 Gigabit Ethernet interface * x1 USB 3.0 Type-C port * x3 USB 3.0 Type-A ports * x1 PCIe M.2 E Key * x1 PCIe M.2 M Key * 512 Mbit OSPI flash * x2 CSI2 Camera interface (RPi and TI Camera connector) * 40-pin Raspberry Pi GPIO header Add A72 specific dts for J721E-SK. [1] https://www.ti.com/tool/SK-TDA4VM Signed-off-by: Sinthu Raja <sinthu.raja@ti.com>
2022-02-09 09:36:55 +00:00
reg = <1>;
cdns,num-lanes = <1>;
#phy-cells = <0>;
cdns,phy-type = <PHY_TYPE_USB3>;
resets = <&serdes_wiz2 2>;
};
};
&usbss1 {
pinctrl-names = "default";
pinctrl-0 = <&main_usbss1_pins_default>;
ti,vbus-divider;
};
&usb1 {
dr_mode = "host";
maximum-speed = "super-speed";
phys = <&serdes2_usb_link>;
phy-names = "cdns3,usb3-phy";
};
&mcu_cpsw {
pinctrl-names = "default";
arm: dts: k3-j721e: Sync with v6.6-rc1 Sync k3-j721e DTS with kernel.org v6.6-rc1. * Use mcu_timer0 defined in k3-j721e-mcu-wakeup.dtsi and remove timer0, we have its clocks set up in clk-data now * Remove hbmc node as support is buggy and needs to be fixed * Remove aliases and chosen node, use them from Kernel * Remove /delete-property/ and clock-frequency from sdhci, usbss, and mcu_uart nodes as we have them in clk and dev data * Remove dummy_clocks as they are not needed * Remove cpsw node as it is not required since it has been fixed in U-Boot * Remove pcie nodes, they are not needed * Remove mcu_i2c0 as it is used for tps659413 PMIC in j721e-sk for which support is not yet added * Change secproxy nodes to their Linux definitions * Remove overriding of ti,cluster-mode in MAIN R5 to default to lockstep mode same as Kernel * Retain tps6594 node as TPS6594 PMIC support is still under review in the Kernel [1], cleanup will be taken post its merge [1] https://lore.kernel.org/all/20230810-tps6594-v6-0-2b2e2399e2ef@ti.com/ Signed-off-by: Neha Malcom Francis <n-francis@ti.com> Reviewed-by: Manorit Chawdhry <m-chawdhry@ti.com>
2023-09-27 13:09:56 +00:00
pinctrl-0 = <&mcu_cpsw_pins_default>, <&mcu_mdio_pins_default>;
arm: dts: k3-j721e-sk: Add initial A72 specific dts support J721E Starter Kit (SK)[1] is a low cost, small form factor board designed for TI’s J721E SoC. TI’s J721E SoC comprises of dual core A72, high performance vision accelerators, video codec accelerators, latest C71x and C66x DSP, high bandwidth real-time IPs for capture and display, GPU, dedicated safety island and security accelerators. The SoC is power optimized to provide best in class performance for industrial and automotive applications. J721E SK supports the following interfaces: * 4 GB LPDDR4 RAM * x1 Gigabit Ethernet interface * x1 USB 3.0 Type-C port * x3 USB 3.0 Type-A ports * x1 PCIe M.2 E Key * x1 PCIe M.2 M Key * 512 Mbit OSPI flash * x2 CSI2 Camera interface (RPi and TI Camera connector) * 40-pin Raspberry Pi GPIO header Add A72 specific dts for J721E-SK. [1] https://www.ti.com/tool/SK-TDA4VM Signed-off-by: Sinthu Raja <sinthu.raja@ti.com>
2022-02-09 09:36:55 +00:00
};
&davinci_mdio {
phy0: ethernet-phy@0 {
reg = <0>;
ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
};
};
&cpsw_port1 {
phy-mode = "rgmii-rxid";
phy-handle = <&phy0>;
};
&dss {
arm: dts: k3-j721e: Sync with v6.6-rc1 Sync k3-j721e DTS with kernel.org v6.6-rc1. * Use mcu_timer0 defined in k3-j721e-mcu-wakeup.dtsi and remove timer0, we have its clocks set up in clk-data now * Remove hbmc node as support is buggy and needs to be fixed * Remove aliases and chosen node, use them from Kernel * Remove /delete-property/ and clock-frequency from sdhci, usbss, and mcu_uart nodes as we have them in clk and dev data * Remove dummy_clocks as they are not needed * Remove cpsw node as it is not required since it has been fixed in U-Boot * Remove pcie nodes, they are not needed * Remove mcu_i2c0 as it is used for tps659413 PMIC in j721e-sk for which support is not yet added * Change secproxy nodes to their Linux definitions * Remove overriding of ti,cluster-mode in MAIN R5 to default to lockstep mode same as Kernel * Retain tps6594 node as TPS6594 PMIC support is still under review in the Kernel [1], cleanup will be taken post its merge [1] https://lore.kernel.org/all/20230810-tps6594-v6-0-2b2e2399e2ef@ti.com/ Signed-off-by: Neha Malcom Francis <n-francis@ti.com> Reviewed-by: Manorit Chawdhry <m-chawdhry@ti.com>
2023-09-27 13:09:56 +00:00
pinctrl-names = "default";
pinctrl-0 = <&dss_vout0_pins_default>;
arm: dts: k3-j721e-sk: Add initial A72 specific dts support J721E Starter Kit (SK)[1] is a low cost, small form factor board designed for TI’s J721E SoC. TI’s J721E SoC comprises of dual core A72, high performance vision accelerators, video codec accelerators, latest C71x and C66x DSP, high bandwidth real-time IPs for capture and display, GPU, dedicated safety island and security accelerators. The SoC is power optimized to provide best in class performance for industrial and automotive applications. J721E SK supports the following interfaces: * 4 GB LPDDR4 RAM * x1 Gigabit Ethernet interface * x1 USB 3.0 Type-C port * x3 USB 3.0 Type-A ports * x1 PCIe M.2 E Key * x1 PCIe M.2 M Key * 512 Mbit OSPI flash * x2 CSI2 Camera interface (RPi and TI Camera connector) * 40-pin Raspberry Pi GPIO header Add A72 specific dts for J721E-SK. [1] https://www.ti.com/tool/SK-TDA4VM Signed-off-by: Sinthu Raja <sinthu.raja@ti.com>
2022-02-09 09:36:55 +00:00
assigned-clocks = <&k3_clks 152 1>, /* VP 1 pixel clock */
<&k3_clks 152 4>, /* VP 2 pixel clock */
<&k3_clks 152 9>, /* VP 3 pixel clock */
<&k3_clks 152 13>; /* VP 4 pixel clock */
assigned-clock-parents = <&k3_clks 152 2>, /* PLL16_HSDIV0 */
<&k3_clks 152 6>, /* DPI0_EXT_CLKSEL_OUT0 */
<&k3_clks 152 11>, /* PLL18_HSDIV0 */
<&k3_clks 152 18>; /* DPI1_EXT_CLKSEL_OUT0 */
};
arm: dts: k3-j721e: Sync with v6.6-rc1 Sync k3-j721e DTS with kernel.org v6.6-rc1. * Use mcu_timer0 defined in k3-j721e-mcu-wakeup.dtsi and remove timer0, we have its clocks set up in clk-data now * Remove hbmc node as support is buggy and needs to be fixed * Remove aliases and chosen node, use them from Kernel * Remove /delete-property/ and clock-frequency from sdhci, usbss, and mcu_uart nodes as we have them in clk and dev data * Remove dummy_clocks as they are not needed * Remove cpsw node as it is not required since it has been fixed in U-Boot * Remove pcie nodes, they are not needed * Remove mcu_i2c0 as it is used for tps659413 PMIC in j721e-sk for which support is not yet added * Change secproxy nodes to their Linux definitions * Remove overriding of ti,cluster-mode in MAIN R5 to default to lockstep mode same as Kernel * Retain tps6594 node as TPS6594 PMIC support is still under review in the Kernel [1], cleanup will be taken post its merge [1] https://lore.kernel.org/all/20230810-tps6594-v6-0-2b2e2399e2ef@ti.com/ Signed-off-by: Neha Malcom Francis <n-francis@ti.com> Reviewed-by: Manorit Chawdhry <m-chawdhry@ti.com>
2023-09-27 13:09:56 +00:00
&dss_ports {
#address-cells = <1>;
#size-cells = <0>;
arm: dts: k3-j721e-sk: Add initial A72 specific dts support J721E Starter Kit (SK)[1] is a low cost, small form factor board designed for TI’s J721E SoC. TI’s J721E SoC comprises of dual core A72, high performance vision accelerators, video codec accelerators, latest C71x and C66x DSP, high bandwidth real-time IPs for capture and display, GPU, dedicated safety island and security accelerators. The SoC is power optimized to provide best in class performance for industrial and automotive applications. J721E SK supports the following interfaces: * 4 GB LPDDR4 RAM * x1 Gigabit Ethernet interface * x1 USB 3.0 Type-C port * x3 USB 3.0 Type-A ports * x1 PCIe M.2 E Key * x1 PCIe M.2 M Key * 512 Mbit OSPI flash * x2 CSI2 Camera interface (RPi and TI Camera connector) * 40-pin Raspberry Pi GPIO header Add A72 specific dts for J721E-SK. [1] https://www.ti.com/tool/SK-TDA4VM Signed-off-by: Sinthu Raja <sinthu.raja@ti.com>
2022-02-09 09:36:55 +00:00
arm: dts: k3-j721e: Sync with v6.6-rc1 Sync k3-j721e DTS with kernel.org v6.6-rc1. * Use mcu_timer0 defined in k3-j721e-mcu-wakeup.dtsi and remove timer0, we have its clocks set up in clk-data now * Remove hbmc node as support is buggy and needs to be fixed * Remove aliases and chosen node, use them from Kernel * Remove /delete-property/ and clock-frequency from sdhci, usbss, and mcu_uart nodes as we have them in clk and dev data * Remove dummy_clocks as they are not needed * Remove cpsw node as it is not required since it has been fixed in U-Boot * Remove pcie nodes, they are not needed * Remove mcu_i2c0 as it is used for tps659413 PMIC in j721e-sk for which support is not yet added * Change secproxy nodes to their Linux definitions * Remove overriding of ti,cluster-mode in MAIN R5 to default to lockstep mode same as Kernel * Retain tps6594 node as TPS6594 PMIC support is still under review in the Kernel [1], cleanup will be taken post its merge [1] https://lore.kernel.org/all/20230810-tps6594-v6-0-2b2e2399e2ef@ti.com/ Signed-off-by: Neha Malcom Francis <n-francis@ti.com> Reviewed-by: Manorit Chawdhry <m-chawdhry@ti.com>
2023-09-27 13:09:56 +00:00
port@0 {
reg = <0>;
arm: dts: k3-j721e-sk: Add initial A72 specific dts support J721E Starter Kit (SK)[1] is a low cost, small form factor board designed for TI’s J721E SoC. TI’s J721E SoC comprises of dual core A72, high performance vision accelerators, video codec accelerators, latest C71x and C66x DSP, high bandwidth real-time IPs for capture and display, GPU, dedicated safety island and security accelerators. The SoC is power optimized to provide best in class performance for industrial and automotive applications. J721E SK supports the following interfaces: * 4 GB LPDDR4 RAM * x1 Gigabit Ethernet interface * x1 USB 3.0 Type-C port * x3 USB 3.0 Type-A ports * x1 PCIe M.2 E Key * x1 PCIe M.2 M Key * 512 Mbit OSPI flash * x2 CSI2 Camera interface (RPi and TI Camera connector) * 40-pin Raspberry Pi GPIO header Add A72 specific dts for J721E-SK. [1] https://www.ti.com/tool/SK-TDA4VM Signed-off-by: Sinthu Raja <sinthu.raja@ti.com>
2022-02-09 09:36:55 +00:00
arm: dts: k3-j721e: Sync with v6.6-rc1 Sync k3-j721e DTS with kernel.org v6.6-rc1. * Use mcu_timer0 defined in k3-j721e-mcu-wakeup.dtsi and remove timer0, we have its clocks set up in clk-data now * Remove hbmc node as support is buggy and needs to be fixed * Remove aliases and chosen node, use them from Kernel * Remove /delete-property/ and clock-frequency from sdhci, usbss, and mcu_uart nodes as we have them in clk and dev data * Remove dummy_clocks as they are not needed * Remove cpsw node as it is not required since it has been fixed in U-Boot * Remove pcie nodes, they are not needed * Remove mcu_i2c0 as it is used for tps659413 PMIC in j721e-sk for which support is not yet added * Change secproxy nodes to their Linux definitions * Remove overriding of ti,cluster-mode in MAIN R5 to default to lockstep mode same as Kernel * Retain tps6594 node as TPS6594 PMIC support is still under review in the Kernel [1], cleanup will be taken post its merge [1] https://lore.kernel.org/all/20230810-tps6594-v6-0-2b2e2399e2ef@ti.com/ Signed-off-by: Neha Malcom Francis <n-francis@ti.com> Reviewed-by: Manorit Chawdhry <m-chawdhry@ti.com>
2023-09-27 13:09:56 +00:00
dpi0_out: endpoint {
remote-endpoint = <&dp0_in>;
};
};
arm: dts: k3-j721e-sk: Add initial A72 specific dts support J721E Starter Kit (SK)[1] is a low cost, small form factor board designed for TI’s J721E SoC. TI’s J721E SoC comprises of dual core A72, high performance vision accelerators, video codec accelerators, latest C71x and C66x DSP, high bandwidth real-time IPs for capture and display, GPU, dedicated safety island and security accelerators. The SoC is power optimized to provide best in class performance for industrial and automotive applications. J721E SK supports the following interfaces: * 4 GB LPDDR4 RAM * x1 Gigabit Ethernet interface * x1 USB 3.0 Type-C port * x3 USB 3.0 Type-A ports * x1 PCIe M.2 E Key * x1 PCIe M.2 M Key * 512 Mbit OSPI flash * x2 CSI2 Camera interface (RPi and TI Camera connector) * 40-pin Raspberry Pi GPIO header Add A72 specific dts for J721E-SK. [1] https://www.ti.com/tool/SK-TDA4VM Signed-off-by: Sinthu Raja <sinthu.raja@ti.com>
2022-02-09 09:36:55 +00:00
arm: dts: k3-j721e: Sync with v6.6-rc1 Sync k3-j721e DTS with kernel.org v6.6-rc1. * Use mcu_timer0 defined in k3-j721e-mcu-wakeup.dtsi and remove timer0, we have its clocks set up in clk-data now * Remove hbmc node as support is buggy and needs to be fixed * Remove aliases and chosen node, use them from Kernel * Remove /delete-property/ and clock-frequency from sdhci, usbss, and mcu_uart nodes as we have them in clk and dev data * Remove dummy_clocks as they are not needed * Remove cpsw node as it is not required since it has been fixed in U-Boot * Remove pcie nodes, they are not needed * Remove mcu_i2c0 as it is used for tps659413 PMIC in j721e-sk for which support is not yet added * Change secproxy nodes to their Linux definitions * Remove overriding of ti,cluster-mode in MAIN R5 to default to lockstep mode same as Kernel * Retain tps6594 node as TPS6594 PMIC support is still under review in the Kernel [1], cleanup will be taken post its merge [1] https://lore.kernel.org/all/20230810-tps6594-v6-0-2b2e2399e2ef@ti.com/ Signed-off-by: Neha Malcom Francis <n-francis@ti.com> Reviewed-by: Manorit Chawdhry <m-chawdhry@ti.com>
2023-09-27 13:09:56 +00:00
port@1 {
reg = <1>;
arm: dts: k3-j721e-sk: Add initial A72 specific dts support J721E Starter Kit (SK)[1] is a low cost, small form factor board designed for TI’s J721E SoC. TI’s J721E SoC comprises of dual core A72, high performance vision accelerators, video codec accelerators, latest C71x and C66x DSP, high bandwidth real-time IPs for capture and display, GPU, dedicated safety island and security accelerators. The SoC is power optimized to provide best in class performance for industrial and automotive applications. J721E SK supports the following interfaces: * 4 GB LPDDR4 RAM * x1 Gigabit Ethernet interface * x1 USB 3.0 Type-C port * x3 USB 3.0 Type-A ports * x1 PCIe M.2 E Key * x1 PCIe M.2 M Key * 512 Mbit OSPI flash * x2 CSI2 Camera interface (RPi and TI Camera connector) * 40-pin Raspberry Pi GPIO header Add A72 specific dts for J721E-SK. [1] https://www.ti.com/tool/SK-TDA4VM Signed-off-by: Sinthu Raja <sinthu.raja@ti.com>
2022-02-09 09:36:55 +00:00
arm: dts: k3-j721e: Sync with v6.6-rc1 Sync k3-j721e DTS with kernel.org v6.6-rc1. * Use mcu_timer0 defined in k3-j721e-mcu-wakeup.dtsi and remove timer0, we have its clocks set up in clk-data now * Remove hbmc node as support is buggy and needs to be fixed * Remove aliases and chosen node, use them from Kernel * Remove /delete-property/ and clock-frequency from sdhci, usbss, and mcu_uart nodes as we have them in clk and dev data * Remove dummy_clocks as they are not needed * Remove cpsw node as it is not required since it has been fixed in U-Boot * Remove pcie nodes, they are not needed * Remove mcu_i2c0 as it is used for tps659413 PMIC in j721e-sk for which support is not yet added * Change secproxy nodes to their Linux definitions * Remove overriding of ti,cluster-mode in MAIN R5 to default to lockstep mode same as Kernel * Retain tps6594 node as TPS6594 PMIC support is still under review in the Kernel [1], cleanup will be taken post its merge [1] https://lore.kernel.org/all/20230810-tps6594-v6-0-2b2e2399e2ef@ti.com/ Signed-off-by: Neha Malcom Francis <n-francis@ti.com> Reviewed-by: Manorit Chawdhry <m-chawdhry@ti.com>
2023-09-27 13:09:56 +00:00
dpi1_out: endpoint {
remote-endpoint = <&tfp410_in>;
};
};
arm: dts: k3-j721e-sk: Add initial A72 specific dts support J721E Starter Kit (SK)[1] is a low cost, small form factor board designed for TI’s J721E SoC. TI’s J721E SoC comprises of dual core A72, high performance vision accelerators, video codec accelerators, latest C71x and C66x DSP, high bandwidth real-time IPs for capture and display, GPU, dedicated safety island and security accelerators. The SoC is power optimized to provide best in class performance for industrial and automotive applications. J721E SK supports the following interfaces: * 4 GB LPDDR4 RAM * x1 Gigabit Ethernet interface * x1 USB 3.0 Type-C port * x3 USB 3.0 Type-A ports * x1 PCIe M.2 E Key * x1 PCIe M.2 M Key * 512 Mbit OSPI flash * x2 CSI2 Camera interface (RPi and TI Camera connector) * 40-pin Raspberry Pi GPIO header Add A72 specific dts for J721E-SK. [1] https://www.ti.com/tool/SK-TDA4VM Signed-off-by: Sinthu Raja <sinthu.raja@ti.com>
2022-02-09 09:36:55 +00:00
};
arm: dts: k3-j721e: Sync with v6.6-rc1 Sync k3-j721e DTS with kernel.org v6.6-rc1. * Use mcu_timer0 defined in k3-j721e-mcu-wakeup.dtsi and remove timer0, we have its clocks set up in clk-data now * Remove hbmc node as support is buggy and needs to be fixed * Remove aliases and chosen node, use them from Kernel * Remove /delete-property/ and clock-frequency from sdhci, usbss, and mcu_uart nodes as we have them in clk and dev data * Remove dummy_clocks as they are not needed * Remove cpsw node as it is not required since it has been fixed in U-Boot * Remove pcie nodes, they are not needed * Remove mcu_i2c0 as it is used for tps659413 PMIC in j721e-sk for which support is not yet added * Change secproxy nodes to their Linux definitions * Remove overriding of ti,cluster-mode in MAIN R5 to default to lockstep mode same as Kernel * Retain tps6594 node as TPS6594 PMIC support is still under review in the Kernel [1], cleanup will be taken post its merge [1] https://lore.kernel.org/all/20230810-tps6594-v6-0-2b2e2399e2ef@ti.com/ Signed-off-by: Neha Malcom Francis <n-francis@ti.com> Reviewed-by: Manorit Chawdhry <m-chawdhry@ti.com>
2023-09-27 13:09:56 +00:00
&dp0_ports {
#address-cells = <1>;
#size-cells = <0>;
arm: dts: k3-j721e-sk: Add initial A72 specific dts support J721E Starter Kit (SK)[1] is a low cost, small form factor board designed for TI’s J721E SoC. TI’s J721E SoC comprises of dual core A72, high performance vision accelerators, video codec accelerators, latest C71x and C66x DSP, high bandwidth real-time IPs for capture and display, GPU, dedicated safety island and security accelerators. The SoC is power optimized to provide best in class performance for industrial and automotive applications. J721E SK supports the following interfaces: * 4 GB LPDDR4 RAM * x1 Gigabit Ethernet interface * x1 USB 3.0 Type-C port * x3 USB 3.0 Type-A ports * x1 PCIe M.2 E Key * x1 PCIe M.2 M Key * 512 Mbit OSPI flash * x2 CSI2 Camera interface (RPi and TI Camera connector) * 40-pin Raspberry Pi GPIO header Add A72 specific dts for J721E-SK. [1] https://www.ti.com/tool/SK-TDA4VM Signed-off-by: Sinthu Raja <sinthu.raja@ti.com>
2022-02-09 09:36:55 +00:00
arm: dts: k3-j721e: Sync with v6.6-rc1 Sync k3-j721e DTS with kernel.org v6.6-rc1. * Use mcu_timer0 defined in k3-j721e-mcu-wakeup.dtsi and remove timer0, we have its clocks set up in clk-data now * Remove hbmc node as support is buggy and needs to be fixed * Remove aliases and chosen node, use them from Kernel * Remove /delete-property/ and clock-frequency from sdhci, usbss, and mcu_uart nodes as we have them in clk and dev data * Remove dummy_clocks as they are not needed * Remove cpsw node as it is not required since it has been fixed in U-Boot * Remove pcie nodes, they are not needed * Remove mcu_i2c0 as it is used for tps659413 PMIC in j721e-sk for which support is not yet added * Change secproxy nodes to their Linux definitions * Remove overriding of ti,cluster-mode in MAIN R5 to default to lockstep mode same as Kernel * Retain tps6594 node as TPS6594 PMIC support is still under review in the Kernel [1], cleanup will be taken post its merge [1] https://lore.kernel.org/all/20230810-tps6594-v6-0-2b2e2399e2ef@ti.com/ Signed-off-by: Neha Malcom Francis <n-francis@ti.com> Reviewed-by: Manorit Chawdhry <m-chawdhry@ti.com>
2023-09-27 13:09:56 +00:00
port@0 {
reg = <0>;
dp0_in: endpoint {
remote-endpoint = <&dpi0_out>;
};
};
arm: dts: k3-j721e-sk: Add initial A72 specific dts support J721E Starter Kit (SK)[1] is a low cost, small form factor board designed for TI’s J721E SoC. TI’s J721E SoC comprises of dual core A72, high performance vision accelerators, video codec accelerators, latest C71x and C66x DSP, high bandwidth real-time IPs for capture and display, GPU, dedicated safety island and security accelerators. The SoC is power optimized to provide best in class performance for industrial and automotive applications. J721E SK supports the following interfaces: * 4 GB LPDDR4 RAM * x1 Gigabit Ethernet interface * x1 USB 3.0 Type-C port * x3 USB 3.0 Type-A ports * x1 PCIe M.2 E Key * x1 PCIe M.2 M Key * 512 Mbit OSPI flash * x2 CSI2 Camera interface (RPi and TI Camera connector) * 40-pin Raspberry Pi GPIO header Add A72 specific dts for J721E-SK. [1] https://www.ti.com/tool/SK-TDA4VM Signed-off-by: Sinthu Raja <sinthu.raja@ti.com>
2022-02-09 09:36:55 +00:00
arm: dts: k3-j721e: Sync with v6.6-rc1 Sync k3-j721e DTS with kernel.org v6.6-rc1. * Use mcu_timer0 defined in k3-j721e-mcu-wakeup.dtsi and remove timer0, we have its clocks set up in clk-data now * Remove hbmc node as support is buggy and needs to be fixed * Remove aliases and chosen node, use them from Kernel * Remove /delete-property/ and clock-frequency from sdhci, usbss, and mcu_uart nodes as we have them in clk and dev data * Remove dummy_clocks as they are not needed * Remove cpsw node as it is not required since it has been fixed in U-Boot * Remove pcie nodes, they are not needed * Remove mcu_i2c0 as it is used for tps659413 PMIC in j721e-sk for which support is not yet added * Change secproxy nodes to their Linux definitions * Remove overriding of ti,cluster-mode in MAIN R5 to default to lockstep mode same as Kernel * Retain tps6594 node as TPS6594 PMIC support is still under review in the Kernel [1], cleanup will be taken post its merge [1] https://lore.kernel.org/all/20230810-tps6594-v6-0-2b2e2399e2ef@ti.com/ Signed-off-by: Neha Malcom Francis <n-francis@ti.com> Reviewed-by: Manorit Chawdhry <m-chawdhry@ti.com>
2023-09-27 13:09:56 +00:00
port@4 {
reg = <4>;
dp0_out: endpoint {
remote-endpoint = <&dp_connector_in>;
};
};
arm: dts: k3-j721e-sk: Add initial A72 specific dts support J721E Starter Kit (SK)[1] is a low cost, small form factor board designed for TI’s J721E SoC. TI’s J721E SoC comprises of dual core A72, high performance vision accelerators, video codec accelerators, latest C71x and C66x DSP, high bandwidth real-time IPs for capture and display, GPU, dedicated safety island and security accelerators. The SoC is power optimized to provide best in class performance for industrial and automotive applications. J721E SK supports the following interfaces: * 4 GB LPDDR4 RAM * x1 Gigabit Ethernet interface * x1 USB 3.0 Type-C port * x3 USB 3.0 Type-A ports * x1 PCIe M.2 E Key * x1 PCIe M.2 M Key * 512 Mbit OSPI flash * x2 CSI2 Camera interface (RPi and TI Camera connector) * 40-pin Raspberry Pi GPIO header Add A72 specific dts for J721E-SK. [1] https://www.ti.com/tool/SK-TDA4VM Signed-off-by: Sinthu Raja <sinthu.raja@ti.com>
2022-02-09 09:36:55 +00:00
};
arm: dts: k3-j721e: Sync with v6.6-rc1 Sync k3-j721e DTS with kernel.org v6.6-rc1. * Use mcu_timer0 defined in k3-j721e-mcu-wakeup.dtsi and remove timer0, we have its clocks set up in clk-data now * Remove hbmc node as support is buggy and needs to be fixed * Remove aliases and chosen node, use them from Kernel * Remove /delete-property/ and clock-frequency from sdhci, usbss, and mcu_uart nodes as we have them in clk and dev data * Remove dummy_clocks as they are not needed * Remove cpsw node as it is not required since it has been fixed in U-Boot * Remove pcie nodes, they are not needed * Remove mcu_i2c0 as it is used for tps659413 PMIC in j721e-sk for which support is not yet added * Change secproxy nodes to their Linux definitions * Remove overriding of ti,cluster-mode in MAIN R5 to default to lockstep mode same as Kernel * Retain tps6594 node as TPS6594 PMIC support is still under review in the Kernel [1], cleanup will be taken post its merge [1] https://lore.kernel.org/all/20230810-tps6594-v6-0-2b2e2399e2ef@ti.com/ Signed-off-by: Neha Malcom Francis <n-francis@ti.com> Reviewed-by: Manorit Chawdhry <m-chawdhry@ti.com>
2023-09-27 13:09:56 +00:00
&serdes0 {
serdes0_pcie_link: phy@0 {
reg = <0>;
cdns,num-lanes = <1>;
#phy-cells = <0>;
cdns,phy-type = <PHY_TYPE_PCIE>;
resets = <&serdes_wiz0 1>;
};
arm: dts: k3-j721e-sk: Add initial A72 specific dts support J721E Starter Kit (SK)[1] is a low cost, small form factor board designed for TI’s J721E SoC. TI’s J721E SoC comprises of dual core A72, high performance vision accelerators, video codec accelerators, latest C71x and C66x DSP, high bandwidth real-time IPs for capture and display, GPU, dedicated safety island and security accelerators. The SoC is power optimized to provide best in class performance for industrial and automotive applications. J721E SK supports the following interfaces: * 4 GB LPDDR4 RAM * x1 Gigabit Ethernet interface * x1 USB 3.0 Type-C port * x3 USB 3.0 Type-A ports * x1 PCIe M.2 E Key * x1 PCIe M.2 M Key * 512 Mbit OSPI flash * x2 CSI2 Camera interface (RPi and TI Camera connector) * 40-pin Raspberry Pi GPIO header Add A72 specific dts for J721E-SK. [1] https://www.ti.com/tool/SK-TDA4VM Signed-off-by: Sinthu Raja <sinthu.raja@ti.com>
2022-02-09 09:36:55 +00:00
};
arm: dts: k3-j721e: Sync with v6.6-rc1 Sync k3-j721e DTS with kernel.org v6.6-rc1. * Use mcu_timer0 defined in k3-j721e-mcu-wakeup.dtsi and remove timer0, we have its clocks set up in clk-data now * Remove hbmc node as support is buggy and needs to be fixed * Remove aliases and chosen node, use them from Kernel * Remove /delete-property/ and clock-frequency from sdhci, usbss, and mcu_uart nodes as we have them in clk and dev data * Remove dummy_clocks as they are not needed * Remove cpsw node as it is not required since it has been fixed in U-Boot * Remove pcie nodes, they are not needed * Remove mcu_i2c0 as it is used for tps659413 PMIC in j721e-sk for which support is not yet added * Change secproxy nodes to their Linux definitions * Remove overriding of ti,cluster-mode in MAIN R5 to default to lockstep mode same as Kernel * Retain tps6594 node as TPS6594 PMIC support is still under review in the Kernel [1], cleanup will be taken post its merge [1] https://lore.kernel.org/all/20230810-tps6594-v6-0-2b2e2399e2ef@ti.com/ Signed-off-by: Neha Malcom Francis <n-francis@ti.com> Reviewed-by: Manorit Chawdhry <m-chawdhry@ti.com>
2023-09-27 13:09:56 +00:00
&serdes1 {
serdes1_pcie_link: phy@0 {
reg = <0>;
cdns,num-lanes = <2>;
#phy-cells = <0>;
cdns,phy-type = <PHY_TYPE_PCIE>;
resets = <&serdes_wiz1 1>, <&serdes_wiz1 2>;
};
arm: dts: k3-j721e-sk: Add initial A72 specific dts support J721E Starter Kit (SK)[1] is a low cost, small form factor board designed for TI’s J721E SoC. TI’s J721E SoC comprises of dual core A72, high performance vision accelerators, video codec accelerators, latest C71x and C66x DSP, high bandwidth real-time IPs for capture and display, GPU, dedicated safety island and security accelerators. The SoC is power optimized to provide best in class performance for industrial and automotive applications. J721E SK supports the following interfaces: * 4 GB LPDDR4 RAM * x1 Gigabit Ethernet interface * x1 USB 3.0 Type-C port * x3 USB 3.0 Type-A ports * x1 PCIe M.2 E Key * x1 PCIe M.2 M Key * 512 Mbit OSPI flash * x2 CSI2 Camera interface (RPi and TI Camera connector) * 40-pin Raspberry Pi GPIO header Add A72 specific dts for J721E-SK. [1] https://www.ti.com/tool/SK-TDA4VM Signed-off-by: Sinthu Raja <sinthu.raja@ti.com>
2022-02-09 09:36:55 +00:00
};
arm: dts: k3-j721e: Sync with v6.6-rc1 Sync k3-j721e DTS with kernel.org v6.6-rc1. * Use mcu_timer0 defined in k3-j721e-mcu-wakeup.dtsi and remove timer0, we have its clocks set up in clk-data now * Remove hbmc node as support is buggy and needs to be fixed * Remove aliases and chosen node, use them from Kernel * Remove /delete-property/ and clock-frequency from sdhci, usbss, and mcu_uart nodes as we have them in clk and dev data * Remove dummy_clocks as they are not needed * Remove cpsw node as it is not required since it has been fixed in U-Boot * Remove pcie nodes, they are not needed * Remove mcu_i2c0 as it is used for tps659413 PMIC in j721e-sk for which support is not yet added * Change secproxy nodes to their Linux definitions * Remove overriding of ti,cluster-mode in MAIN R5 to default to lockstep mode same as Kernel * Retain tps6594 node as TPS6594 PMIC support is still under review in the Kernel [1], cleanup will be taken post its merge [1] https://lore.kernel.org/all/20230810-tps6594-v6-0-2b2e2399e2ef@ti.com/ Signed-off-by: Neha Malcom Francis <n-francis@ti.com> Reviewed-by: Manorit Chawdhry <m-chawdhry@ti.com>
2023-09-27 13:09:56 +00:00
&pcie0_rc {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&ekey_reset_pins_default>;
reset-gpios = <&main_gpio0 72 GPIO_ACTIVE_HIGH>;
arm: dts: k3-j721e-sk: Add initial A72 specific dts support J721E Starter Kit (SK)[1] is a low cost, small form factor board designed for TI’s J721E SoC. TI’s J721E SoC comprises of dual core A72, high performance vision accelerators, video codec accelerators, latest C71x and C66x DSP, high bandwidth real-time IPs for capture and display, GPU, dedicated safety island and security accelerators. The SoC is power optimized to provide best in class performance for industrial and automotive applications. J721E SK supports the following interfaces: * 4 GB LPDDR4 RAM * x1 Gigabit Ethernet interface * x1 USB 3.0 Type-C port * x3 USB 3.0 Type-A ports * x1 PCIe M.2 E Key * x1 PCIe M.2 M Key * 512 Mbit OSPI flash * x2 CSI2 Camera interface (RPi and TI Camera connector) * 40-pin Raspberry Pi GPIO header Add A72 specific dts for J721E-SK. [1] https://www.ti.com/tool/SK-TDA4VM Signed-off-by: Sinthu Raja <sinthu.raja@ti.com>
2022-02-09 09:36:55 +00:00
arm: dts: k3-j721e: Sync with v6.6-rc1 Sync k3-j721e DTS with kernel.org v6.6-rc1. * Use mcu_timer0 defined in k3-j721e-mcu-wakeup.dtsi and remove timer0, we have its clocks set up in clk-data now * Remove hbmc node as support is buggy and needs to be fixed * Remove aliases and chosen node, use them from Kernel * Remove /delete-property/ and clock-frequency from sdhci, usbss, and mcu_uart nodes as we have them in clk and dev data * Remove dummy_clocks as they are not needed * Remove cpsw node as it is not required since it has been fixed in U-Boot * Remove pcie nodes, they are not needed * Remove mcu_i2c0 as it is used for tps659413 PMIC in j721e-sk for which support is not yet added * Change secproxy nodes to their Linux definitions * Remove overriding of ti,cluster-mode in MAIN R5 to default to lockstep mode same as Kernel * Retain tps6594 node as TPS6594 PMIC support is still under review in the Kernel [1], cleanup will be taken post its merge [1] https://lore.kernel.org/all/20230810-tps6594-v6-0-2b2e2399e2ef@ti.com/ Signed-off-by: Neha Malcom Francis <n-francis@ti.com> Reviewed-by: Manorit Chawdhry <m-chawdhry@ti.com>
2023-09-27 13:09:56 +00:00
phys = <&serdes0_pcie_link>;
phy-names = "pcie-phy";
num-lanes = <1>;
arm: dts: k3-j721e-sk: Add initial A72 specific dts support J721E Starter Kit (SK)[1] is a low cost, small form factor board designed for TI’s J721E SoC. TI’s J721E SoC comprises of dual core A72, high performance vision accelerators, video codec accelerators, latest C71x and C66x DSP, high bandwidth real-time IPs for capture and display, GPU, dedicated safety island and security accelerators. The SoC is power optimized to provide best in class performance for industrial and automotive applications. J721E SK supports the following interfaces: * 4 GB LPDDR4 RAM * x1 Gigabit Ethernet interface * x1 USB 3.0 Type-C port * x3 USB 3.0 Type-A ports * x1 PCIe M.2 E Key * x1 PCIe M.2 M Key * 512 Mbit OSPI flash * x2 CSI2 Camera interface (RPi and TI Camera connector) * 40-pin Raspberry Pi GPIO header Add A72 specific dts for J721E-SK. [1] https://www.ti.com/tool/SK-TDA4VM Signed-off-by: Sinthu Raja <sinthu.raja@ti.com>
2022-02-09 09:36:55 +00:00
};
arm: dts: k3-j721e: Sync with v6.6-rc1 Sync k3-j721e DTS with kernel.org v6.6-rc1. * Use mcu_timer0 defined in k3-j721e-mcu-wakeup.dtsi and remove timer0, we have its clocks set up in clk-data now * Remove hbmc node as support is buggy and needs to be fixed * Remove aliases and chosen node, use them from Kernel * Remove /delete-property/ and clock-frequency from sdhci, usbss, and mcu_uart nodes as we have them in clk and dev data * Remove dummy_clocks as they are not needed * Remove cpsw node as it is not required since it has been fixed in U-Boot * Remove pcie nodes, they are not needed * Remove mcu_i2c0 as it is used for tps659413 PMIC in j721e-sk for which support is not yet added * Change secproxy nodes to their Linux definitions * Remove overriding of ti,cluster-mode in MAIN R5 to default to lockstep mode same as Kernel * Retain tps6594 node as TPS6594 PMIC support is still under review in the Kernel [1], cleanup will be taken post its merge [1] https://lore.kernel.org/all/20230810-tps6594-v6-0-2b2e2399e2ef@ti.com/ Signed-off-by: Neha Malcom Francis <n-francis@ti.com> Reviewed-by: Manorit Chawdhry <m-chawdhry@ti.com>
2023-09-27 13:09:56 +00:00
&pcie1_rc {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&mkey_reset_pins_default>;
reset-gpios = <&wkup_gpio0 11 GPIO_ACTIVE_HIGH>;
arm: dts: k3-j721e-sk: Add initial A72 specific dts support J721E Starter Kit (SK)[1] is a low cost, small form factor board designed for TI’s J721E SoC. TI’s J721E SoC comprises of dual core A72, high performance vision accelerators, video codec accelerators, latest C71x and C66x DSP, high bandwidth real-time IPs for capture and display, GPU, dedicated safety island and security accelerators. The SoC is power optimized to provide best in class performance for industrial and automotive applications. J721E SK supports the following interfaces: * 4 GB LPDDR4 RAM * x1 Gigabit Ethernet interface * x1 USB 3.0 Type-C port * x3 USB 3.0 Type-A ports * x1 PCIe M.2 E Key * x1 PCIe M.2 M Key * 512 Mbit OSPI flash * x2 CSI2 Camera interface (RPi and TI Camera connector) * 40-pin Raspberry Pi GPIO header Add A72 specific dts for J721E-SK. [1] https://www.ti.com/tool/SK-TDA4VM Signed-off-by: Sinthu Raja <sinthu.raja@ti.com>
2022-02-09 09:36:55 +00:00
arm: dts: k3-j721e: Sync with v6.6-rc1 Sync k3-j721e DTS with kernel.org v6.6-rc1. * Use mcu_timer0 defined in k3-j721e-mcu-wakeup.dtsi and remove timer0, we have its clocks set up in clk-data now * Remove hbmc node as support is buggy and needs to be fixed * Remove aliases and chosen node, use them from Kernel * Remove /delete-property/ and clock-frequency from sdhci, usbss, and mcu_uart nodes as we have them in clk and dev data * Remove dummy_clocks as they are not needed * Remove cpsw node as it is not required since it has been fixed in U-Boot * Remove pcie nodes, they are not needed * Remove mcu_i2c0 as it is used for tps659413 PMIC in j721e-sk for which support is not yet added * Change secproxy nodes to their Linux definitions * Remove overriding of ti,cluster-mode in MAIN R5 to default to lockstep mode same as Kernel * Retain tps6594 node as TPS6594 PMIC support is still under review in the Kernel [1], cleanup will be taken post its merge [1] https://lore.kernel.org/all/20230810-tps6594-v6-0-2b2e2399e2ef@ti.com/ Signed-off-by: Neha Malcom Francis <n-francis@ti.com> Reviewed-by: Manorit Chawdhry <m-chawdhry@ti.com>
2023-09-27 13:09:56 +00:00
phys = <&serdes1_pcie_link>;
phy-names = "pcie-phy";
num-lanes = <2>;
arm: dts: k3-j721e-sk: Add initial A72 specific dts support J721E Starter Kit (SK)[1] is a low cost, small form factor board designed for TI’s J721E SoC. TI’s J721E SoC comprises of dual core A72, high performance vision accelerators, video codec accelerators, latest C71x and C66x DSP, high bandwidth real-time IPs for capture and display, GPU, dedicated safety island and security accelerators. The SoC is power optimized to provide best in class performance for industrial and automotive applications. J721E SK supports the following interfaces: * 4 GB LPDDR4 RAM * x1 Gigabit Ethernet interface * x1 USB 3.0 Type-C port * x3 USB 3.0 Type-A ports * x1 PCIe M.2 E Key * x1 PCIe M.2 M Key * 512 Mbit OSPI flash * x2 CSI2 Camera interface (RPi and TI Camera connector) * 40-pin Raspberry Pi GPIO header Add A72 specific dts for J721E-SK. [1] https://www.ti.com/tool/SK-TDA4VM Signed-off-by: Sinthu Raja <sinthu.raja@ti.com>
2022-02-09 09:36:55 +00:00
};
arm: dts: k3-j721e: Sync with v6.6-rc1 Sync k3-j721e DTS with kernel.org v6.6-rc1. * Use mcu_timer0 defined in k3-j721e-mcu-wakeup.dtsi and remove timer0, we have its clocks set up in clk-data now * Remove hbmc node as support is buggy and needs to be fixed * Remove aliases and chosen node, use them from Kernel * Remove /delete-property/ and clock-frequency from sdhci, usbss, and mcu_uart nodes as we have them in clk and dev data * Remove dummy_clocks as they are not needed * Remove cpsw node as it is not required since it has been fixed in U-Boot * Remove pcie nodes, they are not needed * Remove mcu_i2c0 as it is used for tps659413 PMIC in j721e-sk for which support is not yet added * Change secproxy nodes to their Linux definitions * Remove overriding of ti,cluster-mode in MAIN R5 to default to lockstep mode same as Kernel * Retain tps6594 node as TPS6594 PMIC support is still under review in the Kernel [1], cleanup will be taken post its merge [1] https://lore.kernel.org/all/20230810-tps6594-v6-0-2b2e2399e2ef@ti.com/ Signed-off-by: Neha Malcom Francis <n-francis@ti.com> Reviewed-by: Manorit Chawdhry <m-chawdhry@ti.com>
2023-09-27 13:09:56 +00:00
&ufs_wrapper {
arm: dts: k3-j721e-sk: Add initial A72 specific dts support J721E Starter Kit (SK)[1] is a low cost, small form factor board designed for TI’s J721E SoC. TI’s J721E SoC comprises of dual core A72, high performance vision accelerators, video codec accelerators, latest C71x and C66x DSP, high bandwidth real-time IPs for capture and display, GPU, dedicated safety island and security accelerators. The SoC is power optimized to provide best in class performance for industrial and automotive applications. J721E SK supports the following interfaces: * 4 GB LPDDR4 RAM * x1 Gigabit Ethernet interface * x1 USB 3.0 Type-C port * x3 USB 3.0 Type-A ports * x1 PCIe M.2 E Key * x1 PCIe M.2 M Key * 512 Mbit OSPI flash * x2 CSI2 Camera interface (RPi and TI Camera connector) * 40-pin Raspberry Pi GPIO header Add A72 specific dts for J721E-SK. [1] https://www.ti.com/tool/SK-TDA4VM Signed-off-by: Sinthu Raja <sinthu.raja@ti.com>
2022-02-09 09:36:55 +00:00
status = "disabled";
};
&mailbox0_cluster0 {
arm: dts: k3-j721e: Sync with v6.6-rc1 Sync k3-j721e DTS with kernel.org v6.6-rc1. * Use mcu_timer0 defined in k3-j721e-mcu-wakeup.dtsi and remove timer0, we have its clocks set up in clk-data now * Remove hbmc node as support is buggy and needs to be fixed * Remove aliases and chosen node, use them from Kernel * Remove /delete-property/ and clock-frequency from sdhci, usbss, and mcu_uart nodes as we have them in clk and dev data * Remove dummy_clocks as they are not needed * Remove cpsw node as it is not required since it has been fixed in U-Boot * Remove pcie nodes, they are not needed * Remove mcu_i2c0 as it is used for tps659413 PMIC in j721e-sk for which support is not yet added * Change secproxy nodes to their Linux definitions * Remove overriding of ti,cluster-mode in MAIN R5 to default to lockstep mode same as Kernel * Retain tps6594 node as TPS6594 PMIC support is still under review in the Kernel [1], cleanup will be taken post its merge [1] https://lore.kernel.org/all/20230810-tps6594-v6-0-2b2e2399e2ef@ti.com/ Signed-off-by: Neha Malcom Francis <n-francis@ti.com> Reviewed-by: Manorit Chawdhry <m-chawdhry@ti.com>
2023-09-27 13:09:56 +00:00
status = "okay";
arm: dts: k3-j721e-sk: Add initial A72 specific dts support J721E Starter Kit (SK)[1] is a low cost, small form factor board designed for TI’s J721E SoC. TI’s J721E SoC comprises of dual core A72, high performance vision accelerators, video codec accelerators, latest C71x and C66x DSP, high bandwidth real-time IPs for capture and display, GPU, dedicated safety island and security accelerators. The SoC is power optimized to provide best in class performance for industrial and automotive applications. J721E SK supports the following interfaces: * 4 GB LPDDR4 RAM * x1 Gigabit Ethernet interface * x1 USB 3.0 Type-C port * x3 USB 3.0 Type-A ports * x1 PCIe M.2 E Key * x1 PCIe M.2 M Key * 512 Mbit OSPI flash * x2 CSI2 Camera interface (RPi and TI Camera connector) * 40-pin Raspberry Pi GPIO header Add A72 specific dts for J721E-SK. [1] https://www.ti.com/tool/SK-TDA4VM Signed-off-by: Sinthu Raja <sinthu.raja@ti.com>
2022-02-09 09:36:55 +00:00
interrupts = <436>;
mbox_mcu_r5fss0_core0: mbox-mcu-r5fss0-core0 {
ti,mbox-rx = <0 0 0>;
ti,mbox-tx = <1 0 0>;
};
mbox_mcu_r5fss0_core1: mbox-mcu-r5fss0-core1 {
ti,mbox-rx = <2 0 0>;
ti,mbox-tx = <3 0 0>;
};
};
&mailbox0_cluster1 {
arm: dts: k3-j721e: Sync with v6.6-rc1 Sync k3-j721e DTS with kernel.org v6.6-rc1. * Use mcu_timer0 defined in k3-j721e-mcu-wakeup.dtsi and remove timer0, we have its clocks set up in clk-data now * Remove hbmc node as support is buggy and needs to be fixed * Remove aliases and chosen node, use them from Kernel * Remove /delete-property/ and clock-frequency from sdhci, usbss, and mcu_uart nodes as we have them in clk and dev data * Remove dummy_clocks as they are not needed * Remove cpsw node as it is not required since it has been fixed in U-Boot * Remove pcie nodes, they are not needed * Remove mcu_i2c0 as it is used for tps659413 PMIC in j721e-sk for which support is not yet added * Change secproxy nodes to their Linux definitions * Remove overriding of ti,cluster-mode in MAIN R5 to default to lockstep mode same as Kernel * Retain tps6594 node as TPS6594 PMIC support is still under review in the Kernel [1], cleanup will be taken post its merge [1] https://lore.kernel.org/all/20230810-tps6594-v6-0-2b2e2399e2ef@ti.com/ Signed-off-by: Neha Malcom Francis <n-francis@ti.com> Reviewed-by: Manorit Chawdhry <m-chawdhry@ti.com>
2023-09-27 13:09:56 +00:00
status = "okay";
arm: dts: k3-j721e-sk: Add initial A72 specific dts support J721E Starter Kit (SK)[1] is a low cost, small form factor board designed for TI’s J721E SoC. TI’s J721E SoC comprises of dual core A72, high performance vision accelerators, video codec accelerators, latest C71x and C66x DSP, high bandwidth real-time IPs for capture and display, GPU, dedicated safety island and security accelerators. The SoC is power optimized to provide best in class performance for industrial and automotive applications. J721E SK supports the following interfaces: * 4 GB LPDDR4 RAM * x1 Gigabit Ethernet interface * x1 USB 3.0 Type-C port * x3 USB 3.0 Type-A ports * x1 PCIe M.2 E Key * x1 PCIe M.2 M Key * 512 Mbit OSPI flash * x2 CSI2 Camera interface (RPi and TI Camera connector) * 40-pin Raspberry Pi GPIO header Add A72 specific dts for J721E-SK. [1] https://www.ti.com/tool/SK-TDA4VM Signed-off-by: Sinthu Raja <sinthu.raja@ti.com>
2022-02-09 09:36:55 +00:00
interrupts = <432>;
mbox_main_r5fss0_core0: mbox-main-r5fss0-core0 {
ti,mbox-rx = <0 0 0>;
ti,mbox-tx = <1 0 0>;
};
mbox_main_r5fss0_core1: mbox-main-r5fss0-core1 {
ti,mbox-rx = <2 0 0>;
ti,mbox-tx = <3 0 0>;
};
};
&mailbox0_cluster2 {
arm: dts: k3-j721e: Sync with v6.6-rc1 Sync k3-j721e DTS with kernel.org v6.6-rc1. * Use mcu_timer0 defined in k3-j721e-mcu-wakeup.dtsi and remove timer0, we have its clocks set up in clk-data now * Remove hbmc node as support is buggy and needs to be fixed * Remove aliases and chosen node, use them from Kernel * Remove /delete-property/ and clock-frequency from sdhci, usbss, and mcu_uart nodes as we have them in clk and dev data * Remove dummy_clocks as they are not needed * Remove cpsw node as it is not required since it has been fixed in U-Boot * Remove pcie nodes, they are not needed * Remove mcu_i2c0 as it is used for tps659413 PMIC in j721e-sk for which support is not yet added * Change secproxy nodes to their Linux definitions * Remove overriding of ti,cluster-mode in MAIN R5 to default to lockstep mode same as Kernel * Retain tps6594 node as TPS6594 PMIC support is still under review in the Kernel [1], cleanup will be taken post its merge [1] https://lore.kernel.org/all/20230810-tps6594-v6-0-2b2e2399e2ef@ti.com/ Signed-off-by: Neha Malcom Francis <n-francis@ti.com> Reviewed-by: Manorit Chawdhry <m-chawdhry@ti.com>
2023-09-27 13:09:56 +00:00
status = "okay";
arm: dts: k3-j721e-sk: Add initial A72 specific dts support J721E Starter Kit (SK)[1] is a low cost, small form factor board designed for TI’s J721E SoC. TI’s J721E SoC comprises of dual core A72, high performance vision accelerators, video codec accelerators, latest C71x and C66x DSP, high bandwidth real-time IPs for capture and display, GPU, dedicated safety island and security accelerators. The SoC is power optimized to provide best in class performance for industrial and automotive applications. J721E SK supports the following interfaces: * 4 GB LPDDR4 RAM * x1 Gigabit Ethernet interface * x1 USB 3.0 Type-C port * x3 USB 3.0 Type-A ports * x1 PCIe M.2 E Key * x1 PCIe M.2 M Key * 512 Mbit OSPI flash * x2 CSI2 Camera interface (RPi and TI Camera connector) * 40-pin Raspberry Pi GPIO header Add A72 specific dts for J721E-SK. [1] https://www.ti.com/tool/SK-TDA4VM Signed-off-by: Sinthu Raja <sinthu.raja@ti.com>
2022-02-09 09:36:55 +00:00
interrupts = <428>;
mbox_main_r5fss1_core0: mbox-main-r5fss1-core0 {
ti,mbox-rx = <0 0 0>;
ti,mbox-tx = <1 0 0>;
};
mbox_main_r5fss1_core1: mbox-main-r5fss1-core1 {
ti,mbox-rx = <2 0 0>;
ti,mbox-tx = <3 0 0>;
};
};
&mailbox0_cluster3 {
arm: dts: k3-j721e: Sync with v6.6-rc1 Sync k3-j721e DTS with kernel.org v6.6-rc1. * Use mcu_timer0 defined in k3-j721e-mcu-wakeup.dtsi and remove timer0, we have its clocks set up in clk-data now * Remove hbmc node as support is buggy and needs to be fixed * Remove aliases and chosen node, use them from Kernel * Remove /delete-property/ and clock-frequency from sdhci, usbss, and mcu_uart nodes as we have them in clk and dev data * Remove dummy_clocks as they are not needed * Remove cpsw node as it is not required since it has been fixed in U-Boot * Remove pcie nodes, they are not needed * Remove mcu_i2c0 as it is used for tps659413 PMIC in j721e-sk for which support is not yet added * Change secproxy nodes to their Linux definitions * Remove overriding of ti,cluster-mode in MAIN R5 to default to lockstep mode same as Kernel * Retain tps6594 node as TPS6594 PMIC support is still under review in the Kernel [1], cleanup will be taken post its merge [1] https://lore.kernel.org/all/20230810-tps6594-v6-0-2b2e2399e2ef@ti.com/ Signed-off-by: Neha Malcom Francis <n-francis@ti.com> Reviewed-by: Manorit Chawdhry <m-chawdhry@ti.com>
2023-09-27 13:09:56 +00:00
status = "okay";
arm: dts: k3-j721e-sk: Add initial A72 specific dts support J721E Starter Kit (SK)[1] is a low cost, small form factor board designed for TI’s J721E SoC. TI’s J721E SoC comprises of dual core A72, high performance vision accelerators, video codec accelerators, latest C71x and C66x DSP, high bandwidth real-time IPs for capture and display, GPU, dedicated safety island and security accelerators. The SoC is power optimized to provide best in class performance for industrial and automotive applications. J721E SK supports the following interfaces: * 4 GB LPDDR4 RAM * x1 Gigabit Ethernet interface * x1 USB 3.0 Type-C port * x3 USB 3.0 Type-A ports * x1 PCIe M.2 E Key * x1 PCIe M.2 M Key * 512 Mbit OSPI flash * x2 CSI2 Camera interface (RPi and TI Camera connector) * 40-pin Raspberry Pi GPIO header Add A72 specific dts for J721E-SK. [1] https://www.ti.com/tool/SK-TDA4VM Signed-off-by: Sinthu Raja <sinthu.raja@ti.com>
2022-02-09 09:36:55 +00:00
interrupts = <424>;
mbox_c66_0: mbox-c66-0 {
ti,mbox-rx = <0 0 0>;
ti,mbox-tx = <1 0 0>;
};
mbox_c66_1: mbox-c66-1 {
ti,mbox-rx = <2 0 0>;
ti,mbox-tx = <3 0 0>;
};
};
&mailbox0_cluster4 {
arm: dts: k3-j721e: Sync with v6.6-rc1 Sync k3-j721e DTS with kernel.org v6.6-rc1. * Use mcu_timer0 defined in k3-j721e-mcu-wakeup.dtsi and remove timer0, we have its clocks set up in clk-data now * Remove hbmc node as support is buggy and needs to be fixed * Remove aliases and chosen node, use them from Kernel * Remove /delete-property/ and clock-frequency from sdhci, usbss, and mcu_uart nodes as we have them in clk and dev data * Remove dummy_clocks as they are not needed * Remove cpsw node as it is not required since it has been fixed in U-Boot * Remove pcie nodes, they are not needed * Remove mcu_i2c0 as it is used for tps659413 PMIC in j721e-sk for which support is not yet added * Change secproxy nodes to their Linux definitions * Remove overriding of ti,cluster-mode in MAIN R5 to default to lockstep mode same as Kernel * Retain tps6594 node as TPS6594 PMIC support is still under review in the Kernel [1], cleanup will be taken post its merge [1] https://lore.kernel.org/all/20230810-tps6594-v6-0-2b2e2399e2ef@ti.com/ Signed-off-by: Neha Malcom Francis <n-francis@ti.com> Reviewed-by: Manorit Chawdhry <m-chawdhry@ti.com>
2023-09-27 13:09:56 +00:00
status = "okay";
arm: dts: k3-j721e-sk: Add initial A72 specific dts support J721E Starter Kit (SK)[1] is a low cost, small form factor board designed for TI’s J721E SoC. TI’s J721E SoC comprises of dual core A72, high performance vision accelerators, video codec accelerators, latest C71x and C66x DSP, high bandwidth real-time IPs for capture and display, GPU, dedicated safety island and security accelerators. The SoC is power optimized to provide best in class performance for industrial and automotive applications. J721E SK supports the following interfaces: * 4 GB LPDDR4 RAM * x1 Gigabit Ethernet interface * x1 USB 3.0 Type-C port * x3 USB 3.0 Type-A ports * x1 PCIe M.2 E Key * x1 PCIe M.2 M Key * 512 Mbit OSPI flash * x2 CSI2 Camera interface (RPi and TI Camera connector) * 40-pin Raspberry Pi GPIO header Add A72 specific dts for J721E-SK. [1] https://www.ti.com/tool/SK-TDA4VM Signed-off-by: Sinthu Raja <sinthu.raja@ti.com>
2022-02-09 09:36:55 +00:00
interrupts = <420>;
mbox_c71_0: mbox-c71-0 {
ti,mbox-rx = <0 0 0>;
ti,mbox-tx = <1 0 0>;
};
};
&mcu_r5fss0_core0 {
arm: dts: k3-j721e: Sync with v6.6-rc1 Sync k3-j721e DTS with kernel.org v6.6-rc1. * Use mcu_timer0 defined in k3-j721e-mcu-wakeup.dtsi and remove timer0, we have its clocks set up in clk-data now * Remove hbmc node as support is buggy and needs to be fixed * Remove aliases and chosen node, use them from Kernel * Remove /delete-property/ and clock-frequency from sdhci, usbss, and mcu_uart nodes as we have them in clk and dev data * Remove dummy_clocks as they are not needed * Remove cpsw node as it is not required since it has been fixed in U-Boot * Remove pcie nodes, they are not needed * Remove mcu_i2c0 as it is used for tps659413 PMIC in j721e-sk for which support is not yet added * Change secproxy nodes to their Linux definitions * Remove overriding of ti,cluster-mode in MAIN R5 to default to lockstep mode same as Kernel * Retain tps6594 node as TPS6594 PMIC support is still under review in the Kernel [1], cleanup will be taken post its merge [1] https://lore.kernel.org/all/20230810-tps6594-v6-0-2b2e2399e2ef@ti.com/ Signed-off-by: Neha Malcom Francis <n-francis@ti.com> Reviewed-by: Manorit Chawdhry <m-chawdhry@ti.com>
2023-09-27 13:09:56 +00:00
mboxes = <&mailbox0_cluster0>, <&mbox_mcu_r5fss0_core0>;
arm: dts: k3-j721e-sk: Add initial A72 specific dts support J721E Starter Kit (SK)[1] is a low cost, small form factor board designed for TI’s J721E SoC. TI’s J721E SoC comprises of dual core A72, high performance vision accelerators, video codec accelerators, latest C71x and C66x DSP, high bandwidth real-time IPs for capture and display, GPU, dedicated safety island and security accelerators. The SoC is power optimized to provide best in class performance for industrial and automotive applications. J721E SK supports the following interfaces: * 4 GB LPDDR4 RAM * x1 Gigabit Ethernet interface * x1 USB 3.0 Type-C port * x3 USB 3.0 Type-A ports * x1 PCIe M.2 E Key * x1 PCIe M.2 M Key * 512 Mbit OSPI flash * x2 CSI2 Camera interface (RPi and TI Camera connector) * 40-pin Raspberry Pi GPIO header Add A72 specific dts for J721E-SK. [1] https://www.ti.com/tool/SK-TDA4VM Signed-off-by: Sinthu Raja <sinthu.raja@ti.com>
2022-02-09 09:36:55 +00:00
memory-region = <&mcu_r5fss0_core0_dma_memory_region>,
<&mcu_r5fss0_core0_memory_region>;
};
&mcu_r5fss0_core1 {
arm: dts: k3-j721e: Sync with v6.6-rc1 Sync k3-j721e DTS with kernel.org v6.6-rc1. * Use mcu_timer0 defined in k3-j721e-mcu-wakeup.dtsi and remove timer0, we have its clocks set up in clk-data now * Remove hbmc node as support is buggy and needs to be fixed * Remove aliases and chosen node, use them from Kernel * Remove /delete-property/ and clock-frequency from sdhci, usbss, and mcu_uart nodes as we have them in clk and dev data * Remove dummy_clocks as they are not needed * Remove cpsw node as it is not required since it has been fixed in U-Boot * Remove pcie nodes, they are not needed * Remove mcu_i2c0 as it is used for tps659413 PMIC in j721e-sk for which support is not yet added * Change secproxy nodes to their Linux definitions * Remove overriding of ti,cluster-mode in MAIN R5 to default to lockstep mode same as Kernel * Retain tps6594 node as TPS6594 PMIC support is still under review in the Kernel [1], cleanup will be taken post its merge [1] https://lore.kernel.org/all/20230810-tps6594-v6-0-2b2e2399e2ef@ti.com/ Signed-off-by: Neha Malcom Francis <n-francis@ti.com> Reviewed-by: Manorit Chawdhry <m-chawdhry@ti.com>
2023-09-27 13:09:56 +00:00
mboxes = <&mailbox0_cluster0>, <&mbox_mcu_r5fss0_core1>;
arm: dts: k3-j721e-sk: Add initial A72 specific dts support J721E Starter Kit (SK)[1] is a low cost, small form factor board designed for TI’s J721E SoC. TI’s J721E SoC comprises of dual core A72, high performance vision accelerators, video codec accelerators, latest C71x and C66x DSP, high bandwidth real-time IPs for capture and display, GPU, dedicated safety island and security accelerators. The SoC is power optimized to provide best in class performance for industrial and automotive applications. J721E SK supports the following interfaces: * 4 GB LPDDR4 RAM * x1 Gigabit Ethernet interface * x1 USB 3.0 Type-C port * x3 USB 3.0 Type-A ports * x1 PCIe M.2 E Key * x1 PCIe M.2 M Key * 512 Mbit OSPI flash * x2 CSI2 Camera interface (RPi and TI Camera connector) * 40-pin Raspberry Pi GPIO header Add A72 specific dts for J721E-SK. [1] https://www.ti.com/tool/SK-TDA4VM Signed-off-by: Sinthu Raja <sinthu.raja@ti.com>
2022-02-09 09:36:55 +00:00
memory-region = <&mcu_r5fss0_core1_dma_memory_region>,
<&mcu_r5fss0_core1_memory_region>;
};
&main_r5fss0_core0 {
arm: dts: k3-j721e: Sync with v6.6-rc1 Sync k3-j721e DTS with kernel.org v6.6-rc1. * Use mcu_timer0 defined in k3-j721e-mcu-wakeup.dtsi and remove timer0, we have its clocks set up in clk-data now * Remove hbmc node as support is buggy and needs to be fixed * Remove aliases and chosen node, use them from Kernel * Remove /delete-property/ and clock-frequency from sdhci, usbss, and mcu_uart nodes as we have them in clk and dev data * Remove dummy_clocks as they are not needed * Remove cpsw node as it is not required since it has been fixed in U-Boot * Remove pcie nodes, they are not needed * Remove mcu_i2c0 as it is used for tps659413 PMIC in j721e-sk for which support is not yet added * Change secproxy nodes to their Linux definitions * Remove overriding of ti,cluster-mode in MAIN R5 to default to lockstep mode same as Kernel * Retain tps6594 node as TPS6594 PMIC support is still under review in the Kernel [1], cleanup will be taken post its merge [1] https://lore.kernel.org/all/20230810-tps6594-v6-0-2b2e2399e2ef@ti.com/ Signed-off-by: Neha Malcom Francis <n-francis@ti.com> Reviewed-by: Manorit Chawdhry <m-chawdhry@ti.com>
2023-09-27 13:09:56 +00:00
mboxes = <&mailbox0_cluster1>, <&mbox_main_r5fss0_core0>;
arm: dts: k3-j721e-sk: Add initial A72 specific dts support J721E Starter Kit (SK)[1] is a low cost, small form factor board designed for TI’s J721E SoC. TI’s J721E SoC comprises of dual core A72, high performance vision accelerators, video codec accelerators, latest C71x and C66x DSP, high bandwidth real-time IPs for capture and display, GPU, dedicated safety island and security accelerators. The SoC is power optimized to provide best in class performance for industrial and automotive applications. J721E SK supports the following interfaces: * 4 GB LPDDR4 RAM * x1 Gigabit Ethernet interface * x1 USB 3.0 Type-C port * x3 USB 3.0 Type-A ports * x1 PCIe M.2 E Key * x1 PCIe M.2 M Key * 512 Mbit OSPI flash * x2 CSI2 Camera interface (RPi and TI Camera connector) * 40-pin Raspberry Pi GPIO header Add A72 specific dts for J721E-SK. [1] https://www.ti.com/tool/SK-TDA4VM Signed-off-by: Sinthu Raja <sinthu.raja@ti.com>
2022-02-09 09:36:55 +00:00
memory-region = <&main_r5fss0_core0_dma_memory_region>,
<&main_r5fss0_core0_memory_region>;
};
&main_r5fss0_core1 {
arm: dts: k3-j721e: Sync with v6.6-rc1 Sync k3-j721e DTS with kernel.org v6.6-rc1. * Use mcu_timer0 defined in k3-j721e-mcu-wakeup.dtsi and remove timer0, we have its clocks set up in clk-data now * Remove hbmc node as support is buggy and needs to be fixed * Remove aliases and chosen node, use them from Kernel * Remove /delete-property/ and clock-frequency from sdhci, usbss, and mcu_uart nodes as we have them in clk and dev data * Remove dummy_clocks as they are not needed * Remove cpsw node as it is not required since it has been fixed in U-Boot * Remove pcie nodes, they are not needed * Remove mcu_i2c0 as it is used for tps659413 PMIC in j721e-sk for which support is not yet added * Change secproxy nodes to their Linux definitions * Remove overriding of ti,cluster-mode in MAIN R5 to default to lockstep mode same as Kernel * Retain tps6594 node as TPS6594 PMIC support is still under review in the Kernel [1], cleanup will be taken post its merge [1] https://lore.kernel.org/all/20230810-tps6594-v6-0-2b2e2399e2ef@ti.com/ Signed-off-by: Neha Malcom Francis <n-francis@ti.com> Reviewed-by: Manorit Chawdhry <m-chawdhry@ti.com>
2023-09-27 13:09:56 +00:00
mboxes = <&mailbox0_cluster1>, <&mbox_main_r5fss0_core1>;
arm: dts: k3-j721e-sk: Add initial A72 specific dts support J721E Starter Kit (SK)[1] is a low cost, small form factor board designed for TI’s J721E SoC. TI’s J721E SoC comprises of dual core A72, high performance vision accelerators, video codec accelerators, latest C71x and C66x DSP, high bandwidth real-time IPs for capture and display, GPU, dedicated safety island and security accelerators. The SoC is power optimized to provide best in class performance for industrial and automotive applications. J721E SK supports the following interfaces: * 4 GB LPDDR4 RAM * x1 Gigabit Ethernet interface * x1 USB 3.0 Type-C port * x3 USB 3.0 Type-A ports * x1 PCIe M.2 E Key * x1 PCIe M.2 M Key * 512 Mbit OSPI flash * x2 CSI2 Camera interface (RPi and TI Camera connector) * 40-pin Raspberry Pi GPIO header Add A72 specific dts for J721E-SK. [1] https://www.ti.com/tool/SK-TDA4VM Signed-off-by: Sinthu Raja <sinthu.raja@ti.com>
2022-02-09 09:36:55 +00:00
memory-region = <&main_r5fss0_core1_dma_memory_region>,
<&main_r5fss0_core1_memory_region>;
};
&main_r5fss1_core0 {
arm: dts: k3-j721e: Sync with v6.6-rc1 Sync k3-j721e DTS with kernel.org v6.6-rc1. * Use mcu_timer0 defined in k3-j721e-mcu-wakeup.dtsi and remove timer0, we have its clocks set up in clk-data now * Remove hbmc node as support is buggy and needs to be fixed * Remove aliases and chosen node, use them from Kernel * Remove /delete-property/ and clock-frequency from sdhci, usbss, and mcu_uart nodes as we have them in clk and dev data * Remove dummy_clocks as they are not needed * Remove cpsw node as it is not required since it has been fixed in U-Boot * Remove pcie nodes, they are not needed * Remove mcu_i2c0 as it is used for tps659413 PMIC in j721e-sk for which support is not yet added * Change secproxy nodes to their Linux definitions * Remove overriding of ti,cluster-mode in MAIN R5 to default to lockstep mode same as Kernel * Retain tps6594 node as TPS6594 PMIC support is still under review in the Kernel [1], cleanup will be taken post its merge [1] https://lore.kernel.org/all/20230810-tps6594-v6-0-2b2e2399e2ef@ti.com/ Signed-off-by: Neha Malcom Francis <n-francis@ti.com> Reviewed-by: Manorit Chawdhry <m-chawdhry@ti.com>
2023-09-27 13:09:56 +00:00
mboxes = <&mailbox0_cluster2>, <&mbox_main_r5fss1_core0>;
arm: dts: k3-j721e-sk: Add initial A72 specific dts support J721E Starter Kit (SK)[1] is a low cost, small form factor board designed for TI’s J721E SoC. TI’s J721E SoC comprises of dual core A72, high performance vision accelerators, video codec accelerators, latest C71x and C66x DSP, high bandwidth real-time IPs for capture and display, GPU, dedicated safety island and security accelerators. The SoC is power optimized to provide best in class performance for industrial and automotive applications. J721E SK supports the following interfaces: * 4 GB LPDDR4 RAM * x1 Gigabit Ethernet interface * x1 USB 3.0 Type-C port * x3 USB 3.0 Type-A ports * x1 PCIe M.2 E Key * x1 PCIe M.2 M Key * 512 Mbit OSPI flash * x2 CSI2 Camera interface (RPi and TI Camera connector) * 40-pin Raspberry Pi GPIO header Add A72 specific dts for J721E-SK. [1] https://www.ti.com/tool/SK-TDA4VM Signed-off-by: Sinthu Raja <sinthu.raja@ti.com>
2022-02-09 09:36:55 +00:00
memory-region = <&main_r5fss1_core0_dma_memory_region>,
<&main_r5fss1_core0_memory_region>;
};
&main_r5fss1_core1 {
arm: dts: k3-j721e: Sync with v6.6-rc1 Sync k3-j721e DTS with kernel.org v6.6-rc1. * Use mcu_timer0 defined in k3-j721e-mcu-wakeup.dtsi and remove timer0, we have its clocks set up in clk-data now * Remove hbmc node as support is buggy and needs to be fixed * Remove aliases and chosen node, use them from Kernel * Remove /delete-property/ and clock-frequency from sdhci, usbss, and mcu_uart nodes as we have them in clk and dev data * Remove dummy_clocks as they are not needed * Remove cpsw node as it is not required since it has been fixed in U-Boot * Remove pcie nodes, they are not needed * Remove mcu_i2c0 as it is used for tps659413 PMIC in j721e-sk for which support is not yet added * Change secproxy nodes to their Linux definitions * Remove overriding of ti,cluster-mode in MAIN R5 to default to lockstep mode same as Kernel * Retain tps6594 node as TPS6594 PMIC support is still under review in the Kernel [1], cleanup will be taken post its merge [1] https://lore.kernel.org/all/20230810-tps6594-v6-0-2b2e2399e2ef@ti.com/ Signed-off-by: Neha Malcom Francis <n-francis@ti.com> Reviewed-by: Manorit Chawdhry <m-chawdhry@ti.com>
2023-09-27 13:09:56 +00:00
mboxes = <&mailbox0_cluster2>, <&mbox_main_r5fss1_core1>;
arm: dts: k3-j721e-sk: Add initial A72 specific dts support J721E Starter Kit (SK)[1] is a low cost, small form factor board designed for TI’s J721E SoC. TI’s J721E SoC comprises of dual core A72, high performance vision accelerators, video codec accelerators, latest C71x and C66x DSP, high bandwidth real-time IPs for capture and display, GPU, dedicated safety island and security accelerators. The SoC is power optimized to provide best in class performance for industrial and automotive applications. J721E SK supports the following interfaces: * 4 GB LPDDR4 RAM * x1 Gigabit Ethernet interface * x1 USB 3.0 Type-C port * x3 USB 3.0 Type-A ports * x1 PCIe M.2 E Key * x1 PCIe M.2 M Key * 512 Mbit OSPI flash * x2 CSI2 Camera interface (RPi and TI Camera connector) * 40-pin Raspberry Pi GPIO header Add A72 specific dts for J721E-SK. [1] https://www.ti.com/tool/SK-TDA4VM Signed-off-by: Sinthu Raja <sinthu.raja@ti.com>
2022-02-09 09:36:55 +00:00
memory-region = <&main_r5fss1_core1_dma_memory_region>,
<&main_r5fss1_core1_memory_region>;
};
&c66_0 {
arm: dts: k3-j721e: Sync with v6.6-rc1 Sync k3-j721e DTS with kernel.org v6.6-rc1. * Use mcu_timer0 defined in k3-j721e-mcu-wakeup.dtsi and remove timer0, we have its clocks set up in clk-data now * Remove hbmc node as support is buggy and needs to be fixed * Remove aliases and chosen node, use them from Kernel * Remove /delete-property/ and clock-frequency from sdhci, usbss, and mcu_uart nodes as we have them in clk and dev data * Remove dummy_clocks as they are not needed * Remove cpsw node as it is not required since it has been fixed in U-Boot * Remove pcie nodes, they are not needed * Remove mcu_i2c0 as it is used for tps659413 PMIC in j721e-sk for which support is not yet added * Change secproxy nodes to their Linux definitions * Remove overriding of ti,cluster-mode in MAIN R5 to default to lockstep mode same as Kernel * Retain tps6594 node as TPS6594 PMIC support is still under review in the Kernel [1], cleanup will be taken post its merge [1] https://lore.kernel.org/all/20230810-tps6594-v6-0-2b2e2399e2ef@ti.com/ Signed-off-by: Neha Malcom Francis <n-francis@ti.com> Reviewed-by: Manorit Chawdhry <m-chawdhry@ti.com>
2023-09-27 13:09:56 +00:00
status = "okay";
mboxes = <&mailbox0_cluster3>, <&mbox_c66_0>;
arm: dts: k3-j721e-sk: Add initial A72 specific dts support J721E Starter Kit (SK)[1] is a low cost, small form factor board designed for TI’s J721E SoC. TI’s J721E SoC comprises of dual core A72, high performance vision accelerators, video codec accelerators, latest C71x and C66x DSP, high bandwidth real-time IPs for capture and display, GPU, dedicated safety island and security accelerators. The SoC is power optimized to provide best in class performance for industrial and automotive applications. J721E SK supports the following interfaces: * 4 GB LPDDR4 RAM * x1 Gigabit Ethernet interface * x1 USB 3.0 Type-C port * x3 USB 3.0 Type-A ports * x1 PCIe M.2 E Key * x1 PCIe M.2 M Key * 512 Mbit OSPI flash * x2 CSI2 Camera interface (RPi and TI Camera connector) * 40-pin Raspberry Pi GPIO header Add A72 specific dts for J721E-SK. [1] https://www.ti.com/tool/SK-TDA4VM Signed-off-by: Sinthu Raja <sinthu.raja@ti.com>
2022-02-09 09:36:55 +00:00
memory-region = <&c66_0_dma_memory_region>,
<&c66_0_memory_region>;
};
&c66_1 {
arm: dts: k3-j721e: Sync with v6.6-rc1 Sync k3-j721e DTS with kernel.org v6.6-rc1. * Use mcu_timer0 defined in k3-j721e-mcu-wakeup.dtsi and remove timer0, we have its clocks set up in clk-data now * Remove hbmc node as support is buggy and needs to be fixed * Remove aliases and chosen node, use them from Kernel * Remove /delete-property/ and clock-frequency from sdhci, usbss, and mcu_uart nodes as we have them in clk and dev data * Remove dummy_clocks as they are not needed * Remove cpsw node as it is not required since it has been fixed in U-Boot * Remove pcie nodes, they are not needed * Remove mcu_i2c0 as it is used for tps659413 PMIC in j721e-sk for which support is not yet added * Change secproxy nodes to their Linux definitions * Remove overriding of ti,cluster-mode in MAIN R5 to default to lockstep mode same as Kernel * Retain tps6594 node as TPS6594 PMIC support is still under review in the Kernel [1], cleanup will be taken post its merge [1] https://lore.kernel.org/all/20230810-tps6594-v6-0-2b2e2399e2ef@ti.com/ Signed-off-by: Neha Malcom Francis <n-francis@ti.com> Reviewed-by: Manorit Chawdhry <m-chawdhry@ti.com>
2023-09-27 13:09:56 +00:00
status = "okay";
mboxes = <&mailbox0_cluster3>, <&mbox_c66_1>;
arm: dts: k3-j721e-sk: Add initial A72 specific dts support J721E Starter Kit (SK)[1] is a low cost, small form factor board designed for TI’s J721E SoC. TI’s J721E SoC comprises of dual core A72, high performance vision accelerators, video codec accelerators, latest C71x and C66x DSP, high bandwidth real-time IPs for capture and display, GPU, dedicated safety island and security accelerators. The SoC is power optimized to provide best in class performance for industrial and automotive applications. J721E SK supports the following interfaces: * 4 GB LPDDR4 RAM * x1 Gigabit Ethernet interface * x1 USB 3.0 Type-C port * x3 USB 3.0 Type-A ports * x1 PCIe M.2 E Key * x1 PCIe M.2 M Key * 512 Mbit OSPI flash * x2 CSI2 Camera interface (RPi and TI Camera connector) * 40-pin Raspberry Pi GPIO header Add A72 specific dts for J721E-SK. [1] https://www.ti.com/tool/SK-TDA4VM Signed-off-by: Sinthu Raja <sinthu.raja@ti.com>
2022-02-09 09:36:55 +00:00
memory-region = <&c66_1_dma_memory_region>,
<&c66_1_memory_region>;
};
&c71_0 {
arm: dts: k3-j721e: Sync with v6.6-rc1 Sync k3-j721e DTS with kernel.org v6.6-rc1. * Use mcu_timer0 defined in k3-j721e-mcu-wakeup.dtsi and remove timer0, we have its clocks set up in clk-data now * Remove hbmc node as support is buggy and needs to be fixed * Remove aliases and chosen node, use them from Kernel * Remove /delete-property/ and clock-frequency from sdhci, usbss, and mcu_uart nodes as we have them in clk and dev data * Remove dummy_clocks as they are not needed * Remove cpsw node as it is not required since it has been fixed in U-Boot * Remove pcie nodes, they are not needed * Remove mcu_i2c0 as it is used for tps659413 PMIC in j721e-sk for which support is not yet added * Change secproxy nodes to their Linux definitions * Remove overriding of ti,cluster-mode in MAIN R5 to default to lockstep mode same as Kernel * Retain tps6594 node as TPS6594 PMIC support is still under review in the Kernel [1], cleanup will be taken post its merge [1] https://lore.kernel.org/all/20230810-tps6594-v6-0-2b2e2399e2ef@ti.com/ Signed-off-by: Neha Malcom Francis <n-francis@ti.com> Reviewed-by: Manorit Chawdhry <m-chawdhry@ti.com>
2023-09-27 13:09:56 +00:00
status = "okay";
mboxes = <&mailbox0_cluster4>, <&mbox_c71_0>;
arm: dts: k3-j721e-sk: Add initial A72 specific dts support J721E Starter Kit (SK)[1] is a low cost, small form factor board designed for TI’s J721E SoC. TI’s J721E SoC comprises of dual core A72, high performance vision accelerators, video codec accelerators, latest C71x and C66x DSP, high bandwidth real-time IPs for capture and display, GPU, dedicated safety island and security accelerators. The SoC is power optimized to provide best in class performance for industrial and automotive applications. J721E SK supports the following interfaces: * 4 GB LPDDR4 RAM * x1 Gigabit Ethernet interface * x1 USB 3.0 Type-C port * x3 USB 3.0 Type-A ports * x1 PCIe M.2 E Key * x1 PCIe M.2 M Key * 512 Mbit OSPI flash * x2 CSI2 Camera interface (RPi and TI Camera connector) * 40-pin Raspberry Pi GPIO header Add A72 specific dts for J721E-SK. [1] https://www.ti.com/tool/SK-TDA4VM Signed-off-by: Sinthu Raja <sinthu.raja@ti.com>
2022-02-09 09:36:55 +00:00
memory-region = <&c71_0_dma_memory_region>,
<&c71_0_memory_region>;
};
Reference in a new issue Copy permalink