u-boot/arch/arm/cpu/armv8/fsl-layerscape/fdt.c

181 lines
4.4 KiB
C
Raw Normal View History

/*
* Copyright 2014-2015 Freescale Semiconductor, Inc.
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <efi_loader.h>
#include <libfdt.h>
#include <fdt_support.h>
#include <phy.h>
#ifdef CONFIG_FSL_LSCH3
#include <asm/arch/fdt.h>
#endif
#ifdef CONFIG_FSL_ESDHC
#include <fsl_esdhc.h>
#endif
#ifdef CONFIG_SYS_DPAA_FMAN
#include <fsl_fman.h>
#endif
#ifdef CONFIG_MP
#include <asm/arch/mp.h>
#endif
#include <fsl_sec.h>
#include <asm/arch-fsl-layerscape/soc.h>
#ifdef CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT
#include <asm/armv8/sec_firmware.h>
#endif
int fdt_fixup_phy_connection(void *blob, int offset, phy_interface_t phyc)
{
return fdt_setprop_string(blob, offset, "phy-connection-type",
phy_string_for_interface(phyc));
}
#ifdef CONFIG_MP
void ft_fixup_cpu(void *blob)
{
int off;
__maybe_unused u64 spin_tbl_addr = (u64)get_spin_tbl_addr();
fdt32_t *reg;
int addr_cells;
u64 val, core_id;
size_t *boot_code_size = &(__secondary_boot_code_size);
#if defined(CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT) && \
defined(CONFIG_FSL_PPA_ARMV8_PSCI)
int node;
u32 psci_ver;
/* Check the psci version to determine if the psci is supported */
psci_ver = sec_firmware_support_psci_version();
if (psci_ver == 0xffffffff) {
/* remove psci DT node */
node = fdt_path_offset(blob, "/psci");
if (node >= 0)
goto remove_psci_node;
node = fdt_node_offset_by_compatible(blob, -1, "arm,psci");
if (node >= 0)
goto remove_psci_node;
node = fdt_node_offset_by_compatible(blob, -1, "arm,psci-0.2");
if (node >= 0)
goto remove_psci_node;
node = fdt_node_offset_by_compatible(blob, -1, "arm,psci-1.0");
if (node >= 0)
goto remove_psci_node;
remove_psci_node:
if (node >= 0)
fdt_del_node(blob, node);
} else {
return;
}
#endif
off = fdt_path_offset(blob, "/cpus");
if (off < 0) {
puts("couldn't find /cpus node\n");
return;
}
of_bus_default_count_cells(blob, off, &addr_cells, NULL);
off = fdt_node_offset_by_prop_value(blob, -1, "device_type", "cpu", 4);
while (off != -FDT_ERR_NOTFOUND) {
reg = (fdt32_t *)fdt_getprop(blob, off, "reg", 0);
if (reg) {
core_id = of_read_number(reg, addr_cells);
if (core_id == 0 || (is_core_online(core_id))) {
val = spin_tbl_addr;
val += id_to_core(core_id) *
SPIN_TABLE_ELEM_SIZE;
val = cpu_to_fdt64(val);
fdt_setprop_string(blob, off, "enable-method",
"spin-table");
fdt_setprop(blob, off, "cpu-release-addr",
&val, sizeof(val));
} else {
debug("skipping offline core\n");
}
} else {
puts("Warning: found cpu node without reg property\n");
}
off = fdt_node_offset_by_prop_value(blob, off, "device_type",
"cpu", 4);
}
fdt_add_mem_rsv(blob, (uintptr_t)&secondary_boot_code,
*boot_code_size);
#if defined(CONFIG_EFI_LOADER) && !defined(CONFIG_SPL_BUILD)
efi_add_memory_map((uintptr_t)&secondary_boot_code,
ALIGN(*boot_code_size, EFI_PAGE_SIZE) >> EFI_PAGE_SHIFT,
EFI_RESERVED_MEMORY_TYPE, false);
#endif
}
#endif
void fsl_fdt_disable_usb(void *blob)
{
int off;
/*
* SYSCLK is used as a reference clock for USB. When the USB
* controller is used, SYSCLK must meet the additional requirement
* of 100 MHz.
*/
if (CONFIG_SYS_CLK_FREQ != 100000000) {
off = fdt_node_offset_by_compatible(blob, -1, "snps,dwc3");
while (off != -FDT_ERR_NOTFOUND) {
fdt_status_disabled(blob, off);
off = fdt_node_offset_by_compatible(blob, off,
"snps,dwc3");
}
}
}
void ft_cpu_setup(void *blob, bd_t *bd)
{
#ifdef CONFIG_FSL_LSCH2
struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
unsigned int svr = in_be32(&gur->svr);
/* delete crypto node if not on an E-processor */
if (!IS_E_PROCESSOR(svr))
fdt_fixup_crypto_node(blob, 0);
#if CONFIG_SYS_FSL_SEC_COMPAT >= 4
else {
ccsr_sec_t __iomem *sec;
sec = (void __iomem *)CONFIG_SYS_FSL_SEC_ADDR;
fdt_fixup_crypto_node(blob, sec_in32(&sec->secvid_ms));
}
#endif
#endif
#ifdef CONFIG_MP
ft_fixup_cpu(blob);
#endif
#ifdef CONFIG_SYS_NS16550
do_fixup_by_compat_u32(blob, "fsl,ns16550",
"clock-frequency", CONFIG_SYS_NS16550_CLK, 1);
#endif
do_fixup_by_compat_u32(blob, "fixed-clock",
"clock-frequency", CONFIG_SYS_CLK_FREQ, 1);
#ifdef CONFIG_PCI
ft_pci_setup(blob, bd);
#endif
#ifdef CONFIG_FSL_ESDHC
fdt_fixup_esdhc(blob, bd);
#endif
#ifdef CONFIG_SYS_DPAA_FMAN
fdt_fixup_fman_firmware(blob);
#endif
fsl_fdt_disable_usb(blob);
}