u-boot/include/configs/db-88f6720.h

/* SPDX-License-Identifier: GPL-2.0+ */
/*
 * Copyright (C) 2016 Stefan Roese <sr@denx.de>
 */

#ifndef _CONFIG_DB_88F6720_H
#define _CONFIG_DB_88F6720_H

/*
 * High Level Configuration Options (easy to change)
 */

/*
 * TEXT_BASE needs to be below 16MiB, since this area is scrubbed
 * for DDR ECC byte filling in the SPL before loading the main
 * U-Boot into it.
 */

/* I2C */
#define CONFIG_I2C_MVTWSI_BASE0		MVEBU_TWSI_BASE

/* USB/EHCI configuration */
#define CONFIG_USB_MAX_CONTROLLER_COUNT 3

/* Environment in SPI NOR flash */

#define PHY_ANEG_TIMEOUT	8000	/* PHY needs a longer aneg time */

/*
 * mv-common.h should be defined after CMD configs since it used them
 * to enable certain macros
 */
#include "mv-common.h"

/* SPL */
/* Defines for SPL */

#define CONFIG_SPL_BSS_START_ADDR	(0x40000000 + (128 << 10))

#define CONFIG_SPL_STACK		(0x40000000 + ((192 - 16) << 10))

#endif /* _CONFIG_DB_88F6720_H */
SPDX: Convert all of our single license tags to Linux Kernel style When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com> 2018-05-06 21:58:06 +00:00			`/* SPDX-License-Identifier: GPL-2.0+ */`
arm: mvebu: Add basic support for Armada 375 eval board db-88f6720 This patch adds basic support for the Marvell A375 eval board. Tested are the following interfaces: - I2C - SPI - SPI NOR - Ethernet (mvpp2), port 0 & 1 Currently the A375 SerDes and DDR3 init code is not intergrated. So the SPL U-Boot is not fully functional. Right now, this A375 mainline U-Boot can only be used by chainloading it via the original Marvell U-Boot. This can be done via this command: => tftpboot 00800000 a375/u-boot-dtb.bin;go 00800000 Signed-off-by: Stefan Roese <sr@denx.de> Cc: Luka Perkov <luka.perkov@sartura.hr> 2016-01-29 08:14:54 +00:00			`/*`
			`* Copyright (C) 2016 Stefan Roese <sr@denx.de>`
			`*/`

			`#ifndef _CONFIG_DB_88F6720_H`
			`#define _CONFIG_DB_88F6720_H`

			`/*`
			`* High Level Configuration Options (easy to change)`
			`*/`

			`/*`
			`* TEXT_BASE needs to be below 16MiB, since this area is scrubbed`
			`* for DDR ECC byte filling in the SPL before loading the main`
			`* U-Boot into it.`
			`*/`

			`/* I2C */`
			`#define CONFIG_I2C_MVTWSI_BASE0 MVEBU_TWSI_BASE`

			`/* USB/EHCI configuration */`
			`#define CONFIG_USB_MAX_CONTROLLER_COUNT 3`

			`/* Environment in SPI NOR flash */`

			`#define PHY_ANEG_TIMEOUT 8000 /* PHY needs a longer aneg time */`

			`/*`
			`* mv-common.h should be defined after CMD configs since it used them`
			`* to enable certain macros`
			`*/`
			`#include "mv-common.h"`

			`/* SPL */`
			`/* Defines for SPL */`

			`#define CONFIG_SPL_BSS_START_ADDR (0x40000000 + (128 << 10))`

			`#define CONFIG_SPL_STACK (0x40000000 + ((192 - 16) << 10))`

			`#endif /* _CONFIG_DB_88F6720_H */`