u-boot/board/altera/socfpga/pll_config.h

122 lines
4.1 KiB
C
Raw Normal View History

/*
* Copyright Altera Corporation (C) 2012-2014. All rights reserved
*
* SPDX-License-Identifier: BSD-3-Clause
*/
/* This file is generated by Preloader Generator */
#ifndef _PRELOADER_PLL_CONFIG_H_
#define _PRELOADER_PLL_CONFIG_H_
/* PLL configuration data */
/* Main PLL */
#define CONFIG_HPS_MAINPLLGRP_VCO_DENOM (0)
#define CONFIG_HPS_MAINPLLGRP_VCO_NUMER (63)
#define CONFIG_HPS_MAINPLLGRP_MPUCLK_CNT (0)
#define CONFIG_HPS_MAINPLLGRP_MAINCLK_CNT (0)
#define CONFIG_HPS_MAINPLLGRP_DBGATCLK_CNT (0)
#define CONFIG_HPS_MAINPLLGRP_MAINQSPICLK_CNT (3)
#define CONFIG_HPS_MAINPLLGRP_MAINNANDSDMMCCLK_CNT (3)
#define CONFIG_HPS_MAINPLLGRP_CFGS2FUSER0CLK_CNT (12)
#define CONFIG_HPS_MAINPLLGRP_MAINDIV_L3MPCLK (1)
#define CONFIG_HPS_MAINPLLGRP_MAINDIV_L3SPCLK (1)
#define CONFIG_HPS_MAINPLLGRP_MAINDIV_L4MPCLK (1)
#define CONFIG_HPS_MAINPLLGRP_MAINDIV_L4SPCLK (1)
#define CONFIG_HPS_MAINPLLGRP_DBGDIV_DBGATCLK (0)
#define CONFIG_HPS_MAINPLLGRP_DBGDIV_DBGCLK (1)
#define CONFIG_HPS_MAINPLLGRP_TRACEDIV_TRACECLK (0)
/*
* To tell where is the clock source:
* 0 = MAINPLL
* 1 = PERIPHPLL
*/
#define CONFIG_HPS_MAINPLLGRP_L4SRC_L4MP (1)
#define CONFIG_HPS_MAINPLLGRP_L4SRC_L4SP (1)
/* Peripheral PLL */
#define CONFIG_HPS_PERPLLGRP_VCO_DENOM (1)
#define CONFIG_HPS_PERPLLGRP_VCO_NUMER (79)
/*
* To tell where is the VCOs source:
* 0 = EOSC1
* 1 = EOSC2
* 2 = F2S
*/
#define CONFIG_HPS_PERPLLGRP_VCO_PSRC (0)
#define CONFIG_HPS_PERPLLGRP_EMAC0CLK_CNT (3)
#define CONFIG_HPS_PERPLLGRP_EMAC1CLK_CNT (3)
#define CONFIG_HPS_PERPLLGRP_PERQSPICLK_CNT (1)
#define CONFIG_HPS_PERPLLGRP_PERNANDSDMMCCLK_CNT (4)
#define CONFIG_HPS_PERPLLGRP_PERBASECLK_CNT (4)
#define CONFIG_HPS_PERPLLGRP_S2FUSER1CLK_CNT (9)
#define CONFIG_HPS_PERPLLGRP_DIV_USBCLK (0)
#define CONFIG_HPS_PERPLLGRP_DIV_SPIMCLK (0)
#define CONFIG_HPS_PERPLLGRP_DIV_CAN0CLK (1)
#define CONFIG_HPS_PERPLLGRP_DIV_CAN1CLK (1)
#define CONFIG_HPS_PERPLLGRP_GPIODIV_GPIODBCLK (6249)
/*
* To tell where is the clock source:
* 0 = F2S_PERIPH_REF_CLK
* 1 = MAIN_CLK
* 2 = PERIPH_CLK
*/
#define CONFIG_HPS_PERPLLGRP_SRC_SDMMC (2)
#define CONFIG_HPS_PERPLLGRP_SRC_NAND (2)
#define CONFIG_HPS_PERPLLGRP_SRC_QSPI (1)
/* SDRAM PLL */
#ifdef CONFIG_SOCFPGA_ARRIA5
/* Arria V SDRAM will run at 533MHz while Cyclone V still at 400MHz
* This if..else... is not required if generated by tools */
#define CONFIG_HPS_SDRPLLGRP_VCO_DENOM (2)
#define CONFIG_HPS_SDRPLLGRP_VCO_NUMER (127)
#else
#define CONFIG_HPS_SDRPLLGRP_VCO_DENOM (0)
#define CONFIG_HPS_SDRPLLGRP_VCO_NUMER (31)
#endif /* CONFIG_SOCFPGA_ARRIA5 */
/*
* To tell where is the VCOs source:
* 0 = EOSC1
* 1 = EOSC2
* 2 = F2S
*/
#define CONFIG_HPS_SDRPLLGRP_VCO_SSRC (0)
#define CONFIG_HPS_SDRPLLGRP_DDRDQSCLK_CNT (1)
#define CONFIG_HPS_SDRPLLGRP_DDRDQSCLK_PHASE (0)
#define CONFIG_HPS_SDRPLLGRP_DDR2XDQSCLK_CNT (0)
#define CONFIG_HPS_SDRPLLGRP_DDR2XDQSCLK_PHASE (0)
#define CONFIG_HPS_SDRPLLGRP_DDRDQCLK_CNT (1)
#define CONFIG_HPS_SDRPLLGRP_DDRDQCLK_PHASE (4)
#define CONFIG_HPS_SDRPLLGRP_S2FUSER2CLK_CNT (5)
#define CONFIG_HPS_SDRPLLGRP_S2FUSER2CLK_PHASE (0)
/* Info for driver */
#define CONFIG_HPS_CLK_OSC1_HZ (25000000)
#define CONFIG_HPS_CLK_OSC2_HZ 0
#define CONFIG_HPS_CLK_F2S_SDR_REF_HZ 0
#define CONFIG_HPS_CLK_F2S_PER_REF_HZ 0
#define CONFIG_HPS_CLK_MAINVCO_HZ (1600000000)
#define CONFIG_HPS_CLK_PERVCO_HZ (1000000000)
#ifdef CONFIG_SOCFPGA_ARRIA5
/* The if..else... is not required if generated by tools */
#define CONFIG_HPS_CLK_SDRVCO_HZ (1066000000)
#else
#define CONFIG_HPS_CLK_SDRVCO_HZ (800000000)
#endif
#define CONFIG_HPS_CLK_EMAC0_HZ (250000000)
#define CONFIG_HPS_CLK_EMAC1_HZ (250000000)
#define CONFIG_HPS_CLK_USBCLK_HZ (200000000)
#define CONFIG_HPS_CLK_NAND_HZ (50000000)
#define CONFIG_HPS_CLK_SDMMC_HZ (200000000)
#define CONFIG_HPS_CLK_QSPI_HZ (400000000)
#define CONFIG_HPS_CLK_SPIM_HZ (200000000)
#define CONFIG_HPS_CLK_CAN0_HZ (100000000)
#define CONFIG_HPS_CLK_CAN1_HZ (100000000)
#define CONFIG_HPS_CLK_GPIODB_HZ (32000)
#define CONFIG_HPS_CLK_L4_MP_HZ (100000000)
#define CONFIG_HPS_CLK_L4_SP_HZ (100000000)
#endif /* _PRELOADER_PLL_CONFIG_H_ */