u-boot/board/intel/edison/Kconfig

if TARGET_EDISON

config SYS_BOARD
	default "edison"

config SYS_VENDOR
	default "intel"

config SYS_SOC
	default "tangier"

config SYS_CONFIG_NAME
	default "edison"

config SYS_TEXT_BASE
	default 0x01101000

config ROM_TABLE_ADDR
	default 0x0e4500

config ROM_TABLE_SIZE
	default 0x007b00

config BOARD_SPECIFIC_OPTIONS # dummy
	def_bool y
	select X86_LOAD_FROM_32_BIT
	select INTEL_MID
	select INTEL_TANGIER
	select BOARD_LATE_INIT
	select MD5

endif
x86: Add Intel Edison board files Add Intel Edison board which is using U-Boot. The patch is based on work done by the following people (in alphabetical order): Aiden Park <aiden.park@intel.com> Dukjoon Jeon <dukjoon.jeon@intel.com> eric.park <eric.park@intel.com> Fabien Chereau <fabien.chereau@intel.com> Felipe Balbi <felipe.balbi@linux.intel.com> Scott D Phillips <scott.d.phillips@intel.com> Sebastien Colleur <sebastienx.colleur@intel.com> Steve Sakoman <steve.sakoman@intel.com> Vincent Tinelli <vincent.tinelli@intel.com> In case we're building for Intel Edison, we must have 4096 bytes of zeroes in the beginning on u-boot.bin. This is done in board/intel/edison/config.mk. First run sets hardware_id environment variable which is read from System Controller Unit (SCU). Serial number (serial# environment variable) is generated based on eMMC CID. MAC address on USB network interface is unique to the board but kept the same all over the time. Set mac address from U-Boot using following scheme: OUI = 02:00:86 next 3 bytes of MAC address set from eMMC serial number This allows to have a unique mac address across reboot and flashing. Signed-off-by: Vincent Tinelli <vincent.tinelli@intel.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> [bmeng: Add MAINTAINERS file for Intel Edison board] Signed-off-by: Bin Meng <bmeng.cn@gmail.com> 2017-07-06 11:41:53 +00:00			`if TARGET_EDISON`

			`config SYS_BOARD`
			`default "edison"`

			`config SYS_VENDOR`
			`default "intel"`

			`config SYS_SOC`
			`default "tangier"`

			`config SYS_CONFIG_NAME`
			`default "edison"`

			`config SYS_TEXT_BASE`
			`default 0x01101000`

x86: edison: Bring minimal ACPI support to the board This board is based on Intel Tangier SoC (Intel Merrifield platform) and may utilize ACPI powerfulness. Bring minimum support by appending initial DSDT table for it. Note, the addresses for generated tables are carefully chosen to avoid any conflicts with existing shadowed BIOS data. The user have somewhat like ~31 kB available for compiled ACPI tables that ought to be enough. Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> 2017-10-03 11:55:08 +00:00			`config ROM_TABLE_ADDR`
			`default 0x0e4500`

			`config ROM_TABLE_SIZE`
			`default 0x007b00`

x86: Add Intel Edison board files Add Intel Edison board which is using U-Boot. The patch is based on work done by the following people (in alphabetical order): Aiden Park <aiden.park@intel.com> Dukjoon Jeon <dukjoon.jeon@intel.com> eric.park <eric.park@intel.com> Fabien Chereau <fabien.chereau@intel.com> Felipe Balbi <felipe.balbi@linux.intel.com> Scott D Phillips <scott.d.phillips@intel.com> Sebastien Colleur <sebastienx.colleur@intel.com> Steve Sakoman <steve.sakoman@intel.com> Vincent Tinelli <vincent.tinelli@intel.com> In case we're building for Intel Edison, we must have 4096 bytes of zeroes in the beginning on u-boot.bin. This is done in board/intel/edison/config.mk. First run sets hardware_id environment variable which is read from System Controller Unit (SCU). Serial number (serial# environment variable) is generated based on eMMC CID. MAC address on USB network interface is unique to the board but kept the same all over the time. Set mac address from U-Boot using following scheme: OUI = 02:00:86 next 3 bytes of MAC address set from eMMC serial number This allows to have a unique mac address across reboot and flashing. Signed-off-by: Vincent Tinelli <vincent.tinelli@intel.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> [bmeng: Add MAINTAINERS file for Intel Edison board] Signed-off-by: Bin Meng <bmeng.cn@gmail.com> 2017-07-06 11:41:53 +00:00			`config BOARD_SPECIFIC_OPTIONS # dummy`
			`def_bool y`
			`select X86_LOAD_FROM_32_BIT`
			`select INTEL_MID`
			`select INTEL_TANGIER`
			`select BOARD_LATE_INIT`
			`select MD5`

			`endif`