u-boot/board/liebherr/xea/MAINTAINERS

XEA BOARD
M:	Lukasz Majewski <lukma@denx.de>
S:	Maintained
F:	board/liebherr/xea/
F:	include/configs/xea.h
F:	configs/imx28_xea_defconfig
F:	configs/imx28_xea_sb_defconfig
imx: Add support for i.MX28 based XEA board This patch introduces support for i.MX28 based XEA board. This board supports DM/DTS in U-Boot proper as well as DM aware drivers in SPL (u-boot.sb) by using OF_PLATDATA. More detailed information regarding usage of it can be found in ./board/liebherr/xea/README file. U-Boot SPL 2019.10-rc1-00233-g6aa549f05c (Aug 12 2019 - 09:23:36 +0200) Trying to boot from MMC1 MMC0: Command 8 timeout (status 0xf0344020) mmc_load_image_raw_sector: mmc block read error U-Boot 2019.10-rc1-00233-g6aa549f05c (Aug 12 2019 - 09:23:36 +0200) CPU: Freescale i.MX28 rev1.2 at 454 MHz BOOT: SSP SPI #3, master, 3V3 NOR Model: Liebherr (LWE) XEA i.MX28 Board DRAM: 128 MiB MMC: MXS MMC: 0 Loading Environment from SPI Flash... SF: Detected n25q128a13 with page size 256 Bytes, erase size 64 KiB, total 16 MiB OK In: serial Out: serial Err: serial Net: Warning: ethernet@800f0000 (eth0) using random MAC address - ce:e1:9e:46:f3:a2 eth0: ethernet@800f0000 Hit any key to stop autoboot: 0 Signed-off-by: Lukasz Majewski <lukma@denx.de> 2019-12-08 21:06:56 +00:00			`XEA BOARD`
			`M: Lukasz Majewski <lukma@denx.de>`
			`S: Maintained`
			`F: board/liebherr/xea/`
			`F: include/configs/xea.h`
			`F: configs/imx28_xea_defconfig`
arm: xea: config: Provide special defconfig for a single binary u-boot The new configs/imx28_xea_sb_defconfig is introduced to facilitate building the single binary u-boot.sb fox XEA board. The biggest distinction from "normal" XEA imx28_xea_sb_defconfig is support for USB mass storage devices (pen drives). To achieve that, the CONFIG_DM_USB is enabled and supported. Signed-off-by: Lukasz Majewski <lukma@denx.de> 2021-12-27 10:46:40 +00:00			`F: configs/imx28_xea_sb_defconfig`