u-boot/board/xilinx/microblaze-generic/xparameters.h

/*
 * (C) Copyright 2007 Michal Simek
 *
 * Michal  SIMEK <monstr@monstr.eu>
 *
 * SPDX-License-Identifier:	GPL-2.0+
 *
 * CAUTION: This file is a faked configuration !!!
 *          There is no real target for the microblaze-generic
 *          configuration. You have to replace this file with
 *          the generated file from your Xilinx design flow.
 */

#define XILINX_BOARD_NAME	microblaze-generic

/* Microblaze is microblaze_0 */
#define XILINX_FSL_NUMBER	3

/* GPIO is LEDs_4Bit*/
#define XILINX_GPIO_BASEADDR	0x40000000

/* Flash Memory is FLASH_2Mx32 */
#define XILINX_FLASH_START	0x2c000000
#define XILINX_FLASH_SIZE	0x00800000

/* Watchdog IP is wxi_timebase_wdt_0 */
#define XILINX_WATCHDOG_BASEADDR	0x50000000
#define XILINX_WATCHDOG_IRQ		1
PATCH: Resolve GPL license problem 2007-03-26 22:32:16 +00:00			`/*`
			`* (C) Copyright 2007 Michal Simek`
			`*`
			`* Michal SIMEK <monstr@monstr.eu>`
			`*`
Add GPL-2.0+ SPDX-License-Identifier to source files Signed-off-by: Wolfgang Denk <wd@denx.de> [trini: Fixup common/cmd_io.c] Signed-off-by: Tom Rini <trini@ti.com> 2013-07-08 07:37:19 +00:00			`* SPDX-License-Identifier: GPL-2.0+`
PATCH: Resolve GPL license problem 2007-03-26 22:32:16 +00:00			`*`
microblaze: Add faked LL_TEMAC driver configuration Expand the specific configuration for the microblaze-generic board in xparameters.h with a faked setup to enable the LL_TEMAC driver. Note: From now the microblaze-generic board is no longer a valid board configuration for a real piece of hardware. Rather than, we use the file config.mk and xparameters.h as a faked board configuration to force the compilation of all potential driver code for Microblaze systems. Signed-off-by: Stephan Linz <linz@li-pro.net> 2012-02-25 00:48:33 +00:00			`* CAUTION: This file is a faked configuration !!!`
			`* There is no real target for the microblaze-generic`
			`* configuration. You have to replace this file with`
			`* the generated file from your Xilinx design flow.`
PATCH: Resolve GPL license problem 2007-03-26 22:32:16 +00:00			`*/`
Support for XUPV2P board Reset support BSP autoconfig support 2007-03-25 23:39:07 +00:00
microblaze: Change microblaze-generic config file Signed-off-by: Michal Simek <monstr@monstr.eu> 2008-12-19 12:25:55 +00:00			`#define XILINX_BOARD_NAME microblaze-generic`

new: FSL and MSR support #2 2007-05-05 16:54:42 +00:00			`/* Microblaze is microblaze_0 */`
new: add writing to msr register 2007-05-07 15:11:09 +00:00			`#define XILINX_FSL_NUMBER 3`
new: FSL and MSR support #2 2007-05-05 16:54:42 +00:00
new: add writing to msr register 2007-05-07 15:11:09 +00:00			`/* GPIO is LEDs_4Bit*/`
			`#define XILINX_GPIO_BASEADDR 0x40000000`
Support for XUPV2P board Reset support BSP autoconfig support 2007-03-25 23:39:07 +00:00
new: add writing to msr register 2007-05-07 15:11:09 +00:00			`/* Flash Memory is FLASH_2Mx32 */`
Change ML401 parameters - Xilinx BSP 2007-04-21 18:53:31 +00:00			`#define XILINX_FLASH_START 0x2c000000`
Support for XUPV2P board Reset support BSP autoconfig support 2007-03-25 23:39:07 +00:00			`#define XILINX_FLASH_SIZE 0x00800000`

watchdog: Add support for Xilinx Microblaze watchdog Watchdog can be used on Microblaze, PPC and Zynq hw designs. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Tom Rini <trini@ti.com> 2013-04-22 09:23:16 +00:00			`/* Watchdog IP is wxi_timebase_wdt_0 */`
			`#define XILINX_WATCHDOG_BASEADDR 0x50000000`
			`#define XILINX_WATCHDOG_IRQ 1`