u-boot/include/configs/sansa_fuze_plus.h

/* SPDX-License-Identifier: GPL-2.0+ */
/*
 * Copyright (C) 2013 Marek Vasut <marex@denx.de>
 */
#ifndef __CONFIGS_SANSA_FUZE_PLUS_H__
#define __CONFIGS_SANSA_FUZE_PLUS_H__

/* U-Boot Commands */

/* Memory configuration */
#define CONFIG_NR_DRAM_BANKS		1		/* 1 bank of DRAM */
#define PHYS_SDRAM_1			0x40000000	/* Base address */
#define PHYS_SDRAM_1_SIZE		0x08000000	/* Max 128 MB RAM */
#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1

/* Environment */
#define CONFIG_ENV_SIZE			(16 * 1024)
#define CONFIG_ENV_OVERWRITE

/* Booting Linux */
#define CONFIG_BOOTFILE		"uImage"
#define CONFIG_LOADADDR		0x42000000
#define CONFIG_SYS_LOAD_ADDR	CONFIG_LOADADDR

/* LCD */
#ifdef CONFIG_VIDEO
#define CONFIG_VIDEO_FONT_4X6
#define CONFIG_VIDEO_MXS_MODE_SYSTEM
#define CONFIG_SYS_BLACK_IN_WRITE
#define LCD_BPP	LCD_COLOR16
#endif

/* USB */
#ifdef CONFIG_CMD_USB
#define CONFIG_EHCI_MXS_PORT0
#define CONFIG_USB_MAX_CONTROLLER_COUNT 1

#define CONFIG_NETCONSOLE
#endif

/* The rest of the configuration is shared */
#include <configs/mxs.h>

#endif	/* __CONFIGS_SANSA_FUZE_PLUS_H__ */
SPDX: Convert all of our single license tags to Linux Kernel style When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com> 2018-05-06 21:58:06 +00:00			`/* SPDX-License-Identifier: GPL-2.0+ */`
ARM: mxs: Add SanDisk Sansa Fuze+ board Add STMP3780-based Sansa Fuze+ board. This board is a small PMP device sporting a CPU which was later rebranded to i.MX233 . Currently supported is USB gadget mode and MMC . Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Otavio Salvador <otavio@ossystems.com.br> Cc: Stefano Babic <sbabic@denx.de> 2013-08-31 13:53:46 +00:00			`/*`
			`* Copyright (C) 2013 Marek Vasut <marex@denx.de>`
			`*/`
			`#ifndef __CONFIGS_SANSA_FUZE_PLUS_H__`
			`#define __CONFIGS_SANSA_FUZE_PLUS_H__`

			`/* U-Boot Commands */`

			`/* Memory configuration */`
			`#define CONFIG_NR_DRAM_BANKS 1 /* 1 bank of DRAM */`
			`#define PHYS_SDRAM_1 0x40000000 /* Base address */`
			`#define PHYS_SDRAM_1_SIZE 0x08000000 /* Max 128 MB RAM */`
			`#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1`

			`/* Environment */`
			`#define CONFIG_ENV_SIZE (16 * 1024)`
			`#define CONFIG_ENV_OVERWRITE`

			`/* Booting Linux */`
			`#define CONFIG_BOOTFILE "uImage"`
			`#define CONFIG_LOADADDR 0x42000000`
			`#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR`

			`/* LCD */`
			`#ifdef CONFIG_VIDEO`
			`#define CONFIG_VIDEO_FONT_4X6`
			`#define CONFIG_VIDEO_MXS_MODE_SYSTEM`
			`#define CONFIG_SYS_BLACK_IN_WRITE`
			`#define LCD_BPP LCD_COLOR16`
			`#endif`

			`/* USB */`
			`#ifdef CONFIG_CMD_USB`
			`#define CONFIG_EHCI_MXS_PORT0`
			`#define CONFIG_USB_MAX_CONTROLLER_COUNT 1`

			`#define CONFIG_NETCONSOLE`
			`#endif`

			`/* The rest of the configuration is shared */`
			`#include <configs/mxs.h>`

			`#endif /* __CONFIGS_SANSA_FUZE_PLUS_H__ */`