u-boot/board/dhelectronics/dh_stm32mp1/Kconfig

if TARGET_DH_STM32MP1_PDK2

config SYS_BOARD
	default "dh_stm32mp1"

config SYS_VENDOR
	default "dhelectronics"

config SYS_CONFIG_NAME
	default "stm32mp15_dh_dhsom"

config ENV_SECT_SIZE
	default 0x10000 if ENV_IS_IN_SPI_FLASH

config ENV_OFFSET
	default 0x1E0000 if ENV_IS_IN_SPI_FLASH

config ENV_OFFSET_REDUND
	default 0x1F0000 if ENV_IS_IN_SPI_FLASH

source "board/st/common/Kconfig"
endif
ARM: dts: stm32: Add DH Electronics DHCOM SoM and PDK2 board Add support for DH Electronics DHCOM SoM and PDK2 rev. 400 carrier board. This is an SoM with STM32MP15xx and an evaluation kit. The baseboard provides Ethernet, UART, USB, CAN and optional display. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Patrick Delaunay <patrick.delaunay@st.com> 2020-01-24 17:39:16 +00:00			`if TARGET_DH_STM32MP1_PDK2`

			`config SYS_BOARD`
			`default "dh_stm32mp1"`

			`config SYS_VENDOR`
			`default "dhelectronics"`

			`config SYS_CONFIG_NAME`
board: stmp32mp1: split board and SOC STM32MP15 configuration Add a configuration file "stm32mp15_st_common.h" to handle the STMicroelectronics boards configuration and rename stm32mp1.h to "stm32mp15_common.h" to handle the generic STM32MP15x series configuration. The configuration file "dh_stm32mp1.h" is also renamed to "stm32mp15_dh_dhcom" for the configuration of board based on the dhelectronics STM32MP15x SOM. In the STMicroelectronics board configuration the default bootcmd "bootcmd_stm32mp" is updated to only select the extlinux file found on SD-Card on STM32MP15x EV1 for boot from NOR device. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> 2021-10-22 08:19:25 +00:00			`default "stm32mp15_dh_dhsom"`
ARM: dts: stm32: Add DH Electronics DHCOM SoM and PDK2 board Add support for DH Electronics DHCOM SoM and PDK2 rev. 400 carrier board. This is an SoM with STM32MP15xx and an evaluation kit. The baseboard provides Ethernet, UART, USB, CAN and optional display. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Patrick Delaunay <patrick.delaunay@st.com> 2020-01-24 17:39:16 +00:00
			`config ENV_SECT_SIZE`
			`default 0x10000 if ENV_IS_IN_SPI_FLASH`

			`config ENV_OFFSET`
			`default 0x1E0000 if ENV_IS_IN_SPI_FLASH`

			`config ENV_OFFSET_REDUND`
			`default 0x1F0000 if ENV_IS_IN_SPI_FLASH`

stm32mp1: dynamically build DFU_ALT_INFO This patch reduces the stm32mp1 environment size and builds dynamically the DFU board configuration with gpt and mtd partitions and information from defconfig (CONFIG_DFU_ALT_RAM0). Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com> 2020-03-18 08:22:46 +00:00			`source "board/st/common/Kconfig"`
ARM: dts: stm32: Add DH Electronics DHCOM SoM and PDK2 board Add support for DH Electronics DHCOM SoM and PDK2 rev. 400 carrier board. This is an SoM with STM32MP15xx and an evaluation kit. The baseboard provides Ethernet, UART, USB, CAN and optional display. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Patrick Delaunay <patrick.delaunay@st.com> 2020-01-24 17:39:16 +00:00			`endif`