Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-11-06 05:04:26 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/drivers/block/Kconfig

74 lines
2.4 KiB
Text
Raw Normal View History

dm: blk: Add a block-device uclass Add a uclass for block devices. These provide block-oriented data access, supporting reading, writing and erasing of whole blocks. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Stephen Warren <swarren@nvidia.com>
2016-02-29 22:25:55 +00:00
config BLK
bool "Support block devices"
depends on DM
dm: blk: Enable CONFIG_BLK if DM_MMC is enabled To speed up conversion to CONFIG_BLK, enable it by default when DM_MMC is enabled. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-10-01 20:43:18 +00:00
default y if DM_MMC
dm: blk: Add a block-device uclass Add a uclass for block devices. These provide block-oriented data access, supporting reading, writing and erasing of whole blocks. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Stephen Warren <swarren@nvidia.com>
2016-02-29 22:25:55 +00:00
help
Enable support for block devices, such as SCSI, MMC and USB
flash sticks. These provide a block-level interface which permits
reading, writing and (in some cases) erasing blocks. Block
devices often have a partition table which allows the device to
be partitioned into several areas, called 'partitions' in U-Boot.
A filesystem can be placed in each partition.
Move most CONFIG_HAVE_BLOCK_DEVICE to Kconfig config_fallbacks.h has some logic that sets HAVE_BLOCK_DEVICE based on a list of enabled options. Moving HAVE_BLOCK_DEVICE to Kconfig allows us to drastically shrink the logic in config_fallbacks.h Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Rename HAVE_BLOCK_DEVICE to CONFIG_BLOCK_DEVICE] Signed-off-by: Tom Rini <trini@konsulko.com>
2018-02-06 18:43:56 +00:00
config HAVE_BLOCK_DEVICE
bool "Enable Legacy Block Device"
help
Some devices require block support whether or not DM is enabled
dm: mmc: Allow disabling driver model in SPL At present if U-Boot proper uses driver model for MMC, then SPL has to also. While this is desirable, it places a significant barrier to moving to driver model in some cases. For example, with a space-constrained SPL it may be necessary to enable CONFIG_SPL_OF_PLATDATA which involves adjusting some drivers. Add new SPL versions of the options for DM_MMC, DM_MMC_OPS and BLK. By default these follow their non-SPL versions, but this can be changed by boards which need it. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-07-04 19:31:19 +00:00
config SPL_BLK
bool "Support block devices in SPL"
depends on SPL_DM && BLK
default y
help
Enable support for block devices, such as SCSI, MMC and USB
flash sticks. These provide a block-level interface which permits
reading, writing and (in some cases) erasing blocks. Block
blk: Support block drivers in TPL At present it is not possible to enable/disable block drivers in TPL. This is needed to provide sandbox support. Add a Kconfig option and adjust the Makefile. Signed-off-by: Simon Glass <sjg@chromium.org>
2018-10-01 18:22:13 +00:00
devices often have a partition table which allows the device to
be partitioned into several areas, called 'partitions' in U-Boot.
A filesystem can be placed in each partition.
config TPL_BLK
bool "Support block devices in TPL"
depends on TPL_DM && BLK
default y
help
Enable support for block devices, such as SCSI, MMC and USB
flash sticks. These provide a block-level interface which permits
reading, writing and (in some cases) erasing blocks. Block
dm: mmc: Allow disabling driver model in SPL At present if U-Boot proper uses driver model for MMC, then SPL has to also. While this is desirable, it places a significant barrier to moving to driver model in some cases. For example, with a space-constrained SPL it may be necessary to enable CONFIG_SPL_OF_PLATDATA which involves adjusting some drivers. Add new SPL versions of the options for DM_MMC, DM_MMC_OPS and BLK. By default these follow their non-SPL versions, but this can be changed by boards which need it. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-07-04 19:31:19 +00:00
devices often have a partition table which allows the device to
be partitioned into several areas, called 'partitions' in U-Boot.
A filesystem can be placed in each partition.
drivers: block: add block device cache Add a block device cache to speed up repeated reads of block devices by various filesystems. This small amount of cache can dramatically speed up filesystem operations by skipping repeated reads of common areas of a block device (typically directory structures). This has shown to have some benefit on FAT filesystem operations of loading a kernel and RAM disk, but more dramatic benefits on ext4 filesystems when the kernel and/or RAM disk are spread across multiple extent header structures as described in commit fc0fc50. The cache is implemented through a minimal list (block_cache) maintained in most-recently-used order and count of the current number of entries (cache_count). It uses a maximum block count setting to prevent copies of large block reads and an upper bound on the number of cached areas. The maximum number of entries in the cache defaults to 32 and the maximum number of blocks per cache entry has a default of 2, which has shown to produce the best results on testing of ext4 and FAT filesystems. The 'blkcache' command (enabled through CONFIG_CMD_BLOCK_CACHE) allows changing these values and can be used to tune for a particular filesystem layout. Signed-off-by: Eric Nelson <eric@nelint.com>
2016-03-28 17:05:44 +00:00
config BLOCK_CACHE
bool "Use block device cache"
block: Have BLOCK_CACHE default to y in some cases When dealing with filesystems that come from block devices we can get a noticeable performance gain in some use cases from having the block cache enabled. The code paths are valid in other cases when we have BLK set and may provide wins in raw reads in some use cases, so have this be default when BLK is enabled. Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-22 16:24:16 +00:00
depends on BLK
default y
drivers: block: add block device cache Add a block device cache to speed up repeated reads of block devices by various filesystems. This small amount of cache can dramatically speed up filesystem operations by skipping repeated reads of common areas of a block device (typically directory structures). This has shown to have some benefit on FAT filesystem operations of loading a kernel and RAM disk, but more dramatic benefits on ext4 filesystems when the kernel and/or RAM disk are spread across multiple extent header structures as described in commit fc0fc50. The cache is implemented through a minimal list (block_cache) maintained in most-recently-used order and count of the current number of entries (cache_count). It uses a maximum block count setting to prevent copies of large block reads and an upper bound on the number of cached areas. The maximum number of entries in the cache defaults to 32 and the maximum number of blocks per cache entry has a default of 2, which has shown to produce the best results on testing of ext4 and FAT filesystems. The 'blkcache' command (enabled through CONFIG_CMD_BLOCK_CACHE) allows changing these values and can be used to tune for a particular filesystem layout. Signed-off-by: Eric Nelson <eric@nelint.com>
2016-03-28 17:05:44 +00:00
help
This option enables a disk-block cache for all block devices.
This is most useful when accessing filesystems under U-Boot since
it will prevent repeated reads from directory structures and other
filesystem data structures.
dm: Add support for scsi/sata based devices All sata based drivers are bind and corresponding block device is created. Based on this find_scsi_device() is able to get back block device based on scsi_curr_dev pointer. intr_scsi() is commented now but it can be replaced by calling find_scsi_device() and scsi_scan(). scsi_dev_desc[] is commented out but common/scsi.c heavily depends on it. That's why CONFIG_SYS_SCSI_MAX_DEVICE is hardcoded to 1 and symbol is reassigned to a block description allocated by uclass. There is only one block description by device now but it doesn't need to be correct when more devices are present. scsi_bind() ensures corresponding block device creation. uclass post_probe (scsi_post_probe()) is doing low level init. SCSI/SATA DM based drivers requires to have 64bit base address as the first entry in platform data structure to setup mmio_base. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-09-08 13:06:45 +00:00
block: Add SPL_BLOCK_CACHE and default n When enabling BLOCK_CACHE on devices with limited RAM during SPL, some devices may not boot. This creates an option to enable block caching in SPL by defaults off. It is dependent on SPL_BLK Fixes: 46960ad6d09b ("block: Have BLOCK_CACHE default to y in some cases") Signed-off-by: Adam Ford <aford173@gmail.com>
2018-06-11 22:17:48 +00:00
config SPL_BLOCK_CACHE
bool "Use block device cache in SPL"
depends on SPL_BLK
default n
help
This option enables the disk-block cache in SPL
blk: Allow control of the block cache in TPL Generally block devices are not enabled in TPL, but in case they are, add a Kconfig option for the block cache. This allows the setting (default off) to be found with CONFIG_IS_ENABLED(). Signed-off-by: Simon Glass <sjg@chromium.org>
2019-05-18 17:59:53 +00:00
config TPL_BLOCK_CACHE
bool "Use block device cache in TPL"
depends on TPL_BLK
default n
help
This option enables the disk-block cache in TPL
Kconfig: Add a CONFIG_IDE option At present IDE support is controlled by CONFIG_CMD_IDE. Add a separate CONFIG_IDE option so that IDE support can be enabled without requiring the 'ide' command. Update existing users and move the ide driver into drivers/block since it should not be in common/. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-05-17 09:25:30 +00:00
config IDE
bool "Support IDE controllers"
Move most CONFIG_HAVE_BLOCK_DEVICE to Kconfig config_fallbacks.h has some logic that sets HAVE_BLOCK_DEVICE based on a list of enabled options. Moving HAVE_BLOCK_DEVICE to Kconfig allows us to drastically shrink the logic in config_fallbacks.h Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Rename HAVE_BLOCK_DEVICE to CONFIG_BLOCK_DEVICE] Signed-off-by: Tom Rini <trini@konsulko.com>
2018-02-06 18:43:56 +00:00
select HAVE_BLOCK_DEVICE
Kconfig: Add a CONFIG_IDE option At present IDE support is controlled by CONFIG_CMD_IDE. Add a separate CONFIG_IDE option so that IDE support can be enabled without requiring the 'ide' command. Update existing users and move the ide driver into drivers/block since it should not be in common/. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-05-17 09:25:30 +00:00
help
Enables support for IDE (Integrated Drive Electronics) hard drives.
This allows access to raw blocks and filesystems on an IDE drive
from U-Boot. See also CMD_IDE which provides an 'ide' command for
performing various IDE operations.
Reference in a new issue Copy permalink